{"product_id":"fabulous-pa11-detect","title":"FABULOUS PA11 DETECTED","description":"\u003cp style=\"text-align: justify;\"\u003eDETECT PA11 is a composite powder based on Polyamide 11, formulated by Fabulous for powder bed laser sintering systems (SLS, LS). Its navy blue color in the mass, combined with specific fillers, makes the produced parts detectable by optical, magnetic and X-ray methods, and allows their magnetization.\u003cbr\u003e\u003cbr\u003eThe formulation incorporates bio-sourced components and maintains the high mechanical properties expected from a sintered PA11, with a Young's modulus greater than 1600 MPa and an elongation at break of approximately 12.5% in the XY plane.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eMelting occurs between 190 and 202 °C (DSC measurement), for a typical process temperature of around 183 °C depending on the machine and measurement method used. Laser particle size is between 45 and 65 µm, with a tapped density of approximately 0.65 g\/cm³ and a sintered part density close to 1.13 g\/cm³.\u003cbr\u003e\u003cbr\u003eA refresh rate of 50% is recommended to maintain process consistency from one cycle to the next. Wall impermeability is achieved from 2 mm thickness. In post-processing, sandblasting leads to an Ra roughness of 12 ±4 µm, reduced to 6 ±2 µm after finishing.\u003c\/p\u003e\n\u003ch2\u003eCompliance and Applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eDETECT PA11 complies with European Regulation N° 10\/2011 and FDA CFR 21 on food contact, and is compliant with Good Manufacturing Practices (GMP). Its PA11 matrix exhibits good chemical resistance to alkaline environments, hydrocarbons, oils, fuels and common solvents; however, it is sensitive to acids. The manufactured parts are intended for the food, pharmaceutical, medical, packaging and safety equipment sectors, where detection of accidental fragments by metal, optical or X-ray inspection is required on the line.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eComposite Polyamide 11 (additives and fillers)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePhysical state\u003c\/th\u003e\n\n\u003ctd\u003eNavy blue powder in the mass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eProcess\u003c\/th\u003e\n\n\u003ctd\u003ePowder bed laser sintering (SLS, LS)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eParticle size (laser diffraction)\u003c\/th\u003e\n\n\u003ctd\u003e45–65 µm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTapped powder density (23 °C)\u003c\/th\u003e\n\n\u003ctd\u003e0.65 ±0.05 g\/cm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSintered part density\u003c\/th\u003e\n\n\u003ctd\u003e1.13 ±0.05 g\/cm³\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMoisture absorption 24 h (ASTM D570)\u003c\/th\u003e\n\n\u003ctd\u003e1.12 ±0.05 % (estimated)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMelting temperature (DSC)\u003c\/th\u003e\n\n\u003ctd\u003e190–202 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eProcess temperature\u003c\/th\u003e\n\n\u003ctd\u003e≈ 183 °C (±2)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eYoung's Modulus (ISO 527)\u003c\/th\u003e\n\n\u003ctd\u003e\u0026gt; 1600 MPa\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFlexural Modulus (ISO 178)\u003c\/th\u003e\n\n\u003ctd\u003e\u0026gt; 1500 MPa\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTensile strength XY (ISO 527)\u003c\/th\u003e\n\n\u003ctd\u003e38 ±6 MPa\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTensile strength Z (ISO 527)\u003c\/th\u003e\n\n\u003ctd\u003e20 ±3 MPa\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eElongation at break XY (ISO 527)\u003c\/th\u003e\n\n\u003ctd\u003e12.5 ±1.5 %\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eElongation at break Z (ISO 527)\u003c\/th\u003e\n\n\u003ctd\u003e\u0026gt;2.5 ±1 %\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRoughness Ra after sandblasting (ISO 4287)\u003c\/th\u003e\n\n\u003ctd\u003e12 ±4 µm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRoughness Ra after finishing (ISO 4287)\u003c\/th\u003e\n\n\u003ctd\u003e6 ±2 µm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended refresh rate\u003c\/th\u003e\n\n\u003ctd\u003e50 %\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMinimum wall sealing thickness\u003c\/th\u003e\n\n\u003ctd\u003e2 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eWater behavior\u003c\/th\u003e\n\n\u003ctd\u003eInsoluble (\u0026lt; 1 mg\/m³ at 20 °C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\n\u003ctd\u003eAlkaline, hydrocarbons, oils, fuels, organic solvents; sensitive to acids\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFood contact compliance\u003c\/th\u003e\n\n\u003ctd\u003eEU N° 10\/2011, FDA CFR 21\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eProduction compliance\u003c\/th\u003e\n\n\u003ctd\u003eGMP\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDetectability\u003c\/th\u003e\n\n\u003ctd\u003eOptical, magnetic, X-ray; magnetizable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eOrigin\u003c\/th\u003e\n\n\u003ctd\u003eFrance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePowder bed laser sintering systems (SLS, LS)\u003c\/li\u003e\n\n  \u003cli\u003eDesktop SLS printers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"FABULOUS","offers":[{"title":"10 kg","offer_id":57322519363928,"sku":"117","price":950.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Detect-montage-BQVF-1024x1024.jpg?v=1779184705","url":"https:\/\/3dprint.shop\/en\/products\/fabulous-pa11-detect","provider":"3dPrint.Shop","version":"1.0","type":"link"}