{"title":"Prusa","description":"\u003cp\u003eIn this collection you will find Prusament filaments manufactured in-house with a diameter tolerance guaranteed to ±0.02 mm and a measurement report viewable by spool number\u003c\/p\u003e","products":[{"product_id":"thermistor-ntc-100k-115-mm","title":"NTC Thermistor 100 k – 115 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe NTC 100k - 115 mm Thermistor is the replacement thermal sensor for Prusa Research FDM printers equipped with a Nextruder extruder (MK4, MK3.9, CORE One ranges). It provides real-time measurement of the heater block or heatsink temperature, a fundamental value used by the firmware to regulate the heating element and trigger the machine's thermal safety mechanisms.\u003cbr\u003e\u003cbr\u003eOf NTC type (negative temperature coefficient), with a nominal resistance of 100 kΩ, this sensor conforms to the profile expected by Prusa firmwares, ensuring controlled regulation without software recalibration on reassembly. Depending on the printer model, this thermistor is also used to monitor the heatsink temperature on the XL.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out in the event of an inconsistent reading, a thermal error during printing, or physical sensor failure (wire break, loss of insulation). The operation is performed with the printer switched off and the hotend cooled, following the procedure documented on the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product is supplied with its M3×4 locking screw ready to install. After reassembly, verify the consistency of the cold-start reading and perform a PID tune to validate the stability of thermal regulation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eThermal sensor (NTC thermistor)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNominal resistance\u003c\/th\u003e\n\u003ctd\u003e100 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSensor type\u003c\/th\u003e\n\u003ctd\u003eNTC (negative temperature coefficient)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 × NTC 100k 115 mm thermistor + 1 × M3×4 locking screw\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\u003ctd\u003eInstallation procedure on help.prusa3d.com (by printer model)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ hotend or heatsink maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL (heatsink temperature monitoring)\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n  \u003cli\u003eNot compatible with earlier generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with the MK3.5, MK3.5S, HT90, or INDX models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893893804376,"sku":"IDF__10601_IDS__1576","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9e4ee773-c070-4777-821c-dc3866a2a049.jpg?v=1779700115"},{"product_id":"heater-40-w-120-mm","title":"Heater 40 W – 120 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe 40 W - 120 mm Heater is the replacement heating cartridge for the Nextruder extruder fitted on the latest-generation Prusa Research FDM printers (MK4, MK3.9, CORE One ranges). Its function is to transfer electrical power to the heater block to bring the melt zone to the target temperature set by the firmware, a critical point for consistent extrusion flow.\u003cbr\u003e\u003cbr\u003eRated at 40 W at 24 V, this cartridge conforms to the thermal profile expected by Prusa firmwares, ensuring controlled heating behaviour without software modification on reassembly. Its 120 mm cable length matches the original wiring routing on the Nextruder.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out in the event of a heating failure, a thermal error during printing, contact loss, or localised overheating. The operation is performed with the printer switched off and the hotend cooled, following the procedure documented on the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product is supplied with the M3×4 locking screws required for installation. After reassembly, perform a PID tune to validate the thermal regulation of the cartridge\/block pair, and check the temperature reading consistency at cold start.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eHeating cartridge (resistive element)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e40 W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 × 40 W \/ 120 mm heating cartridge + 2 × M3×4 locking screws\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\u003ctd\u003eInstallation procedure on help.prusa3d.com (by printer model)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ hotend maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n  \u003cli\u003eNot compatible with earlier generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with the MK3.5 \/ MK3.5S, HT90, or Enclosure models (MKx Enclosure, XL Enclosure, MINI Enclosure)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894000984,"sku":"IDF__10923_IDS__1568","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/c73f9ccb-2960-40a6-b0d8-3d7130a7774c.jpg?v=1779700727"},{"product_id":"plaque-en-acier-poudree-texturee-de-la-xl","title":"XL Textured Powder-Coated Steel Sheet","description":"\u003cp\u003eThe XL Textured Powder-Coated Steel Sheet is the spring-steel removable print surface developed by Prusa Research specifically for its Original Prusa XL large-format FDM printer. Made from double-sided powder-coated spring steel, it attaches magnetically to the XL's segmented heated build plate and is removed with a simple flex at the end of a print to facilitate part removal, particularly useful on the large footprints typical of this machine format.\u003cbr\u003e\u003cbr\u003eThe powder coating applied directly to the metal provides a robust, hard-to-damage finish: if a hot nozzle crashes into it, the metal mass dissipates the heat without major surface damage. The texture from the powder coating transfers to the first layer of prints and masks most mechanical marks, making it a proven surface for series production on long print cycles.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe surface provides direct adhesion for PLA and PETG without requiring glue stick, and accepts a more forgiving Live Adjust Z than a smooth sheet. Prints release automatically after the sheet has cooled completely. The first layer may appear more compressed than on a smooth sheet; PLA parts with a small contact area may require a brim, whilst PLA parts with a large contact area may exhibit warping — a consideration amplified on the large footprints typical of the XL.\u003c\/p\u003e\n\u003ch2\u003eCare and precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eNever clean this sheet with acetone: the solvent creates microcracks in the PEI texture and degrades the surface over time. Use isopropyl alcohol (IPA) on a cold build plate for degreasing between prints. Note that PEI coatings are consumables designed to wear over time: wear is not covered by the warranty, except for manufacturing defects or material failure. If the workshop also uses a smooth PEI sheet on the same machine, a new Live Adjust Z setting will be required when switching.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eRemovable spring-steel print surface (flexible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePowder-coated spring steel, double-sided textured PEI coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eSuited to the print volume of the Original Prusa XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic on XL segmented heated build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eScratch-resistant, transfers texture to prints, forgiving Live Adjust Z\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning\u003c\/th\u003e\n\u003ctd\u003eIPA only (never acetone)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003ePrint surface \/ consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal Prusa XL large-format FDM printer\u003c\/li\u003e\n\u003cli\u003eNot compatible with other Prusa models (MK, MINI, CORE One series, SL1\/SL1S, CW1\/CW1S, HT90, INDX)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894394200,"sku":"IDF__11403_IDS__1511","price":64.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/5760.jpg?v=1779701319"},{"product_id":"plaque-en-acier-poudree-satinee-de-la-xl","title":"XL Satin Powder-Coated Steel Sheet","description":"\u003cp style=\"text-align: justify;\"\u003eThe XL Satin Powder-Coated Steel Sheet is the spring-steel removable print surface developed by Prusa Research specifically for its Original Prusa XL large-format FDM printer. Made from spring steel with a satin finish (slightly textured mat powder coating), it attaches magnetically to the XL's segmented heated build plate and is removed with a simple flex at the end of a print to facilitate part removal.\u003cbr\u003e\u003cbr\u003eThe satin finish sits between the smooth and textured variants in the range: its slight relief provides controlled adhesion for PLA and PETG whilst supporting a wide variety of filaments, including advanced materials (ABS, ASA, FlexFill 98A, polycarbonate, PC Blend). The vast majority of these filaments can be printed without a release layer, making it a versatile sheet for workshops printing multiple materials on the same machine.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eDirect adhesion is suitable for PLA and PETG without glue stick. ASA and PC Blend prints require a brim, skirt, or wipe tower to manage thermal shrinkage. For regular polycarbonate printing, applying a thin layer of glue stick is recommended to protect the PEI surface over time. The sheet must not be attacked with a pointed metal spatula: use only the spring flex to release parts once the sheet has cooled.\u003c\/p\u003e\n\u003ch2\u003eCare and precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eNever clean this sheet with acetone: the solvent creates microcracks in the PEI texture and degrades the surface over time. Use isopropyl alcohol (IPA) on a cold build plate for degreasing between prints. Note that PEI coatings are consumables designed to wear over time: wear is not covered by the warranty, except for manufacturing defects or material failure.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eRemovable spring-steel print surface (flexible)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePowder-coated spring steel, satin PEI coating\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin (slightly textured mat, intermediate between smooth and textured)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eSuited to the print volume of the Original Prusa XL\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic on XL segmented heated build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSupported materials\u003c\/th\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, FlexFill 98A, polycarbonate, PC Blend, etc.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCleaning\u003c\/th\u003e\n\u003ctd\u003eIPA only (never acetone, no pointed metal spatula)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003ePrint surface \/ consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa XL large-format FDM printer\u003c\/li\u003e\n  \u003cli\u003eNot compatible with other Prusa models (MK, MINI, CORE One series, SL1\/SL1S, CW1\/CW1S, HT90, INDX)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894426968,"sku":"IDF__12042_IDS__1529","price":70.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/5773.jpg?v=1779701595"},{"product_id":"prusa-nextruder-silicone-sock-set","title":"Prusa Nextruder Silicone Sock – Set","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Nextruder Silicone Sock Set is a pack of three silicone socks for the Nextruder extrusion system developed by Prusa Research. Each sock wraps around the heater block and nozzle to thermally insulate them and protect them from molten filament splatter.\u003cbr\u003e\u003cbr\u003eThe use of these socks helps stabilise the temperature at the extrusion point, limit the build-up of material residue on the heater block, and maintain hotend cleanliness in series production.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation is carried out only when cold, with the hotend disassembled or the printer switched off and cooled, to avoid any risk of burns: the sock is slid manually around the heater block after cleaning the nozzle and block. The fit must be adjusted to avoid obstructing the hotend fan or interfering with build plate probing. Prusa Research provides the installation procedure on its online knowledge base, to be selected according to the printer model.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eHotend silicone sock\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHigh-temperature silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e3 socks\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eThermal insulation of the heater block and protection against splatter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eAccessory \/ maintenance consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI Enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893895311704,"sku":"IDF__12691_IDS__1566","price":5.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PrusaNextruderSiliconesock-set.jpg?v=1779281761"},{"product_id":"spare-parts-bundle-xl-multi-tool","title":"Spare Parts Bundle (XL Multi-Tool)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Spare Parts Bundle XL Multi-Tool is a complete kit of spare parts and workshop consumables dedicated to the FDM Original Prusa XL printer in multi-tool configuration (dual-tool or five-tool). It groups together the most frequently needed items for continuous operation: complete hotends, heatsinks, fans, sensors, and associated hardware.\u003cbr\u003e\u003cbr\u003eThe kit is intended for series production workshops, fab labs, and industrial environments where printer uptime is critical: it enables preventive maintenance operations to be anticipated and reduces downtime in the event of a printhead extrusion component replacement.\u003c\/p\u003e\n\u003ch2\u003eKit contents\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe assembly includes two pre-assembled hotends with 0.4 mm brass nozzle (heater block, heating cartridge, thermistor), two heatsinks fitted with the load cell and filament sensor, and four fans (hotend and part-cooling). Also included are one heated build plate tile and its cables, two left and right lateral filament sensors with their wiring and accessories (ferrules, 45 mm PTFE tubes), multi-tool accessories (calibration peg, silicone strips for parking plate, cable clip plugs), two cable holders, two 1275 mm PTFE tubes, three Nextruder socks, associated hardware, Prusa lubricant, twenty cable ties, a cleaning needle, and an IPA pad.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eParts installation is carried out in accordance with the Prusa repair manuals available on the online knowledge base, to be selected according to the operation to be performed. Parts are available in the variants specified by the manufacturer; this kit corresponds to the XL multi-tool configuration and is not suitable for single-tool printers or other platforms in the range.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eSpare parts and maintenance kit\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget platform\u003c\/th\u003e\n\u003ctd\u003eOriginal Prusa XL multi-tool (2 or 5 tools)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHotends included\u003c\/th\u003e\n\u003ctd\u003e2 complete hotends with 0.4 mm brass nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeatsinks\u003c\/th\u003e\n\u003ctd\u003e2 assembled heatsinks (load cell + filament sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFans\u003c\/th\u003e\n\u003ctd\u003e2 hotend fans + 2 part-cooling fans\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeated build plate\u003c\/th\u003e\n\u003ctd\u003e1 tile + 2 tile cables\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLateral filament sensors\u003c\/th\u003e\n\u003ctd\u003e2 assembled units (left and right) + 2 cables\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSensor accessories\u003c\/th\u003e\n\u003ctd\u003e6 ferrules, 6 × 45 mm PTFE tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMulti-tool accessories\u003c\/th\u003e\n\u003ctd\u003eCalibration peg, 2 silicone strips, 2 cable clip plugs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePTFE tubes\u003c\/th\u003e\n\u003ctd\u003e2 × 1275 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNextruder socks\u003c\/th\u003e\n\u003ctd\u003e3 units\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConsumables\u003c\/th\u003e\n\u003ctd\u003ePrusa lubricant, 20 cable ties, cleaning needle, IPA pad\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardware\u003c\/th\u003e\n\u003ctd\u003eVarious screws and nuts included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa multi-tool printers equipped with the Nextruder system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL in dual-tool configuration\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL in five-tool configuration\u003c\/li\u003e\n  \u003cli\u003eNot compatible with single-tool Prusa XL, nor with MK4 \/ MK4S, MK3.9 \/ MK3.9S, MK3.5 \/ MK3.5S, MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MINI, MINI+, HT90, INDX, CORE One \/ CORE One+ \/ CORE One L, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893895344472,"sku":"IDF__13314_IDS__2005","price":315.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/SparePartsBundle_XLMulti-Tool.jpg?v=1779281358"},{"product_id":"nextruder-heaterblock","title":"Nextruder Heater Block","description":"\u003cp style=\"text-align: justify;\"\u003eThe Nextruder Heater Block is the aluminium heater block integrated into the hotend assembly of the Nextruder, the extrusion system developed by Prusa Research for its FDM printers equipped with this platform. It is the part that maintains the heating cartridge and thermistor in contact with the nozzle, ensuring the thermal regulation required for filament melting.\u003cbr\u003e\u003cbr\u003eThis spare part allows a worn, damaged, or material-residue-contaminated block to be replaced without having to change the entire hotend.\u003c\/p\u003e\n\u003ch2\u003eKit contents and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe kit includes one Nextruder heater block and three M3x4 Torx 6 locking screws required for mounting on the hotend. The operation requires partial disassembly of the extruder assembly. Prusa Research provides a detailed repair manual on its online knowledge base, to be selected according to the relevant printer model, to ensure correct reassembly of the part.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eHeater block for hotend assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eAluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIncluded hardware\u003c\/th\u003e\n\u003ctd\u003e3 × M3x4 locking screws (Torx 6)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\u003ctd\u003e1 heater block\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MINI, MINI+, MK3.5, MK3.5S, HT90, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893895770456,"sku":"IDF__13900_IDS__1572","price":12.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/nextruderheaterblock.jpg?v=1779270522"},{"product_id":"assembled-hotend-for-mk3-series","title":"Assembled Hotend (for MK3 Series)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Assembled Hotend for MK3 series is the complete pre-assembled hotend supplied as a spare part by Prusa Research, dedicated to the melt zone of Original Prusa FDM printers in the MK3 series (MK3, MK3S, MK3S+) and MK3.5 series (MK3.5, MK3.5S). Delivered ready to install, it groups together all the components required for filament melting and deposition: V6 nozzle, heater block, heat break, heatsink with its collet, PTFE tube, 24 V \/ 40 W heating cartridge with pre-wired Molex connector, and thermistor.\u003cbr\u003e\u003cbr\u003eThe pre-assembled unit allows a complete hotend to be replaced in a single operation, without recombining individual components. It is a proven solution for maintenance workshops wishing to reduce machine downtime during a post-incident replacement or preventive maintenance operation on a fleet of MK3 \/ MK3S \/ MK3S+ \/ MK3.5(S).\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out in the event of recurring clogging, filament leakage, thermal failure (cartridge or thermistor), PTFE degradation, or nozzle wear not recoverable by simple part replacement. The operation is performed with the printer switched off and the hotend cooled, following the Prusa installation manual dedicated to this kit (prusa.io\/mk3hotend) and the procedure published on help.prusa3d.com for the relevant printer model. After reassembly, perform a PID tune and an extrusion test to validate thermal regulation and consistent flow.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eComplete pre-assembled hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eV6 nozzle + heater block + heat break + heatsink + collet + PTFE tube + 24 V\/40 W heating cartridge with Molex connector + thermistor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCartridge voltage\u003c\/th\u003e\n\u003ctd\u003e24 V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCartridge power\u003c\/th\u003e\n\u003ctd\u003e40 W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\u003ctd\u003eDedicated installation manual (prusa.io\/mk3hotend) + help.prusa3d.com procedure by model\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ complete hotend maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa Research printers in the MK3 and MK3.5 series\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3S+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.5 and MK3.5S\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S, MK3.9 \/ MK3.9S, MK4 \/ MK4S, XL, MINI \/ MINI+, SL1 \/ SL1S, CW1 \/ CW1S, CORE One \/ CORE One+ \/ CORE One L, HT90, and INDX\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893897572696,"sku":"IDF__16993_IDS__3106","price":66.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/df643631-3b36-4ddf-8033-4673d3cebc1b.jpg?v=1779702402"},{"product_id":"smooth-rod-y-axis-mk4-mk3-s-mk2-5-s-mk2-s","title":"Smooth Rod Y-Axis (MK4, MK3\/S\/+, MK2.5\/S, MK2\/S)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Smooth Rod is a linear guide rod used on the movement axes of compatible FDM 3D printers. This mechanical component guides the moving carriages via linear bearings and directly contributes to the kinematic stability of movements during printing phases.\u003cbr\u003e\u003cbr\u003eMachined for direct integration into original assemblies, this replacement rod restores axis movement precision in the event of wear, surface scoring, or mechanical play observed during extended machine use.\u003c\/p\u003e \u003ch2\u003eLinear guidance and movement precision\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eSmooth rods contribute to maintaining axis alignment and the regularity of print system movements. Their surface condition directly influences the behaviour of linear bearings, mechanical vibrations, and the movement quality of mobile assemblies.\u003cbr\u003e\u003cbr\u003eReplacing a worn rod helps limit defects related to parasitic movements, dimensional variations, or irregularities visible on printed layers. This type of maintenance is commonly performed in FDM production environments operating at sustained throughput.\u003c\/p\u003e \u003ch2\u003eMaintenance and mechanical integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part is intended for direct replacement of original guidance components on compatible printers. It integrates into the mechanical assemblies specified by Prusa Research and can be used as part of preventive or corrective maintenance of linear axes.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eLinear guide smooth rod\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMechanical guidance of print axes\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMechanical compatibility\u003c\/th\u003e\n\u003ctd\u003ePrusa-compatible linear bearings\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDirect integration on compatible assemblies\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eLinear guide smooth rod\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Original Prusa FDM 3D printers\u003c\/li\u003e \u003cli\u003eCompatible with Prusa linear axes\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3S+\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893897605464,"sku":"IDF__2521_IDS__324","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/463.jpg?v=1779291412"},{"product_id":"buddy-control-board","title":"Buddy Control Board","description":"\u003cp style=\"text-align: justify;\"\u003eThe Buddy Control Board is the main electronic board used on several Original Prusa 3D printers. It manages the machine's essential functions: stepper motor drive, thermal control of heating elements, sensor management, communication with the user interface, and processing of FDM print operations.\u003cbr\u003e\u003cbr\u003eDeveloped for the Prusa ecosystem, this control board integrates the electronics required for the coordinated operation of the printer's mechanical and thermal subsystems. It can be used as part of a defective board replacement or an advanced maintenance operation.\u003c\/p\u003e \u003ch2\u003eElectronic architecture and machine management\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe Buddy Board centralises connections related to motor axes, fans, thermistors, heating elements, and detection devices present on compatible printers. Its architecture is designed to ensure stable communication between the firmware and the various machine components.\u003cbr\u003e\u003cbr\u003eIt contributes to maintaining movement precision, thermal control, and extrusion regularity during extended print cycles. Board replacement must be carried out in accordance with the technical procedures specified by the manufacturer.\u003c\/p\u003e \u003ch2\u003eMaintenance and integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis electronic board is supplied as an original spare part for compatible platforms equipped with the Buddy architecture. It integrates directly into the assemblies specified by Prusa Research and restores the printer's drive and control functions without structural modification of the system.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003e3D printer main board\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eControl and management of printer systems\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eArchitecture\u003c\/th\u003e\n\u003ctd\u003eBuddy system\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDirect integration on compatible printers\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eControl electronic board\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Original Prusa FDM 3D printers with Buddy architecture\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MINI\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MINI+\u003c\/li\u003e \u003cli\u003eCompatible with Prusa platforms equipped with a Buddy Control Board\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893897933144,"sku":"IDF__4789_IDS__798","price":36.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/BUDDYCONTROLBOARD.jpg?v=1779291099"},{"product_id":"prusa-hotend-fan-mk4-3-9-xl","title":"Prusa Hotend Fan MK4\/3.9\/XL","description":"\u003cp style=\"text-align: justify;\"\u003eThe Hotend Fan MK4\/3.9\/XL is a replacement fan dedicated to cooling the heatsink of Nextruder systems on compatible Original Prusa printers. This component ensures thermal dissipation around the hotend in order to limit heat creep and maintain stable filament feed during extended FDM prints.\u003cbr\u003e\u003cbr\u003eDesigned as an original manufacturer part, it integrates directly into existing assemblies without specific mechanical adaptation. Its replacement can be carried out as part of preventive or corrective maintenance on the extrusion systems of the relevant machines.\u003c\/p\u003e \u003ch2\u003eThermal management and maintenance\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe fan provides continuous cooling of the heatsink to maintain effective separation between the melt zone and the cold zone. This thermal control is particularly important when printing materials sensitive to premature softening in the filament path.\u003cbr\u003e\u003cbr\u003eReplacing the fan restores original cooling performance in the event of wear, mechanical noise, or rotation failure. Installation is carried out via the maintenance procedures documented by Prusa Research for each compatible platform.\u003c\/p\u003e \u003ch2\u003eIntegration on Prusa platforms\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part is compatible with several generations of Nextruder systems used on the MK4, MK3.9, XL, and CORE One platforms. It is supplied as a single spare part for replacement of the original hotend fan. Several references and component variants exist depending on machine generations and assembly configurations.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eReplacement hotend fan\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eHotend heatsink cooling\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtruder compatibility\u003c\/th\u003e\n\u003ctd\u003eNextruder system\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eHotend fan\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDirect replacement of original part\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and repair\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eOriginal Prusa FDM 3D printers equipped with the Nextruder system\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3.9\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3.9S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK4\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK4S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa XL\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa CORE One\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa CORE One L\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893898129752,"sku":"IDF__5517_IDS__1617","price":8.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/a63ed130-b85c-4257-a36c-a0a093459171.jpg?v=1779289596"},{"product_id":"prusa-print-fan-mk3-s-mini","title":"Prusa Print Fan (MK3\/S\/+, MINI\/+)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Print Fan MK3\/S\/+, MINI\/+ is the replacement part-cooling fan for Original Prusa i3 MK3, MK3S, MK3S+, and Original Prusa MINI and MINI+ FDM printers. It is a radial fan (blower) whose function is to blow an airflow onto the part being printed, immediately after filament deposition, to rapidly solidify the material and improve the quality of bridges, overhangs, and fine details.\u003cbr\u003e\u003cbr\u003eThis reference matches the mechanical and electrical specifications of the factory-installed fan, guaranteeing an airflow, connector, and thermal signature consistent with the calibration profile of Prusa firmwares.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe fan installs on the designated extruder cowling, connected to the corresponding connector on the electronic board. Replacement requires partial disassembly of the extrusion carriage; Prusa Research provides a detailed repair manual on its online knowledge base, to be selected according to the relevant printer model, to ensure compliant reassembly and preserve the SuperPINDA \/ contact sensor calibration as well as fan PWM regulation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003ePart-cooling fan (print fan \/ blower)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eCooling of freshly extruded filament\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\u003ctd\u003e1 fan\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa i3 MK3\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa i3 MK3S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa i3 MK3S+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MINI\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MINI+\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK4, MK4S, MK3.9, MK3.9S, MK3.5, MK3.5S, MK2.5S, MK2.5, MK2S, MK2, HT90, INDX, CORE One \/ CORE One+ \/ CORE One L, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899211096,"sku":"IDF__8079_IDS__167","price":6.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PRUSAPRINTFANMK3SMINI.jpg?v=1779286116"},{"product_id":"prusa_hepa_filter","title":"Prusa HEPA Filter","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa HEPA Filter is a combined HEPA and activated carbon filter cartridge, intended for Prusa enclosures (MK Enclosure, XL Enclosure, MINI Enclosure), Prusa CORE One, CORE One+, and CORE One L printers, as well as the HT90 model. The filter treats both the fine particles generated by FDM extrusion and the volatile organic compounds emitted by certain technical thermoplastics.\u003c\/p\u003e\n\u003ch2\u003eService life and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe manufacturer's estimated service life is at least 600 hours of use under normal printing conditions. Replacement is carried out when a reduction in filtration efficiency is observed, or as preventive maintenance, particularly during intensive use of emissive materials (ABS, ASA, polycarbonate, certain nylons). Installation is carried out according to the manual for the relevant enclosure or printer, available on the Prusa knowledge base. Compatibility must be verified before ordering: the filter is not intended for open Prusa printers (MK, MINI, XL, MK4\/4S, MK3.5\/3.9 series and their variants).\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\n  \n  \n  \n  \n  \u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCombined filter cartridge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFiltration stages\u003c\/th\u003e\n\u003ctd\u003eHEPA + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEstimated service life\u003c\/th\u003e\n\u003ctd\u003e≥ 600 hours of use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 × HEPA-carbon filter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eOriginal Prusa Research part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa MK Enclosure\u003c\/li\u003e\n  \u003cli\u003ePrusa XL Enclosure\u003c\/li\u003e\n  \u003cli\u003ePrusa MINI Enclosure\u003c\/li\u003e\n  \u003cli\u003ePrusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003ePrusa CORE One L\u003c\/li\u003e\n  \u003cli\u003ePrusa HT90\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899243864,"sku":"IDF__8764_IDS__1469","price":22.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/5419.jpg?v=1779204127"},{"product_id":"nextruder_v6_nozzle_adapter","title":"Nextruder V6 Nozzle Adapter","description":"\u003cp style=\"text-align: justify;\"\u003eThe Nextruder V6 Nozzle Adapter is an interface part designed by Prusa Research to make the Nextruder extrusion platform compatible with V6-standard nozzles. It opens the Nextruder ecosystem to the wide range of existing third-party nozzles in V6 format (brass, hardened steel, nickel-plated, ruby-tipped, diamond-tipped, in various diameters), without mechanical modification of the original hotend.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe adapter mounts on the Nextruder hotend in place of the standard Prusa nozzle interface. The V6 nozzle is then threaded onto the adapter following the standard V6 format procedure. The V6 nozzle is not included in the delivery and must be ordered separately.\u003cbr\u003e\u003cbr\u003ePrusa Research provides a detailed installation manual on its online knowledge base, to be consulted before any intervention to ensure compliant assembly and preserve the hotend's thermal regulation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eNozzle adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAccepted nozzle format\u003c\/th\u003e\n\u003ctd\u003eV6 (E3D V6 standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle included\u003c\/th\u003e\n\u003ctd\u003eNo (to be purchased separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\u003ctd\u003e1 adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eAccessory \/ compatibility extension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n  \u003cli\u003eCompatible with all V6-format nozzles (brass, hardened steel, plated, ruby-tipped, etc.)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899440472,"sku":"IDF__10801_IDS__1504","price":18.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF_10801_IDS_1504.jpg?v=1779280069"},{"product_id":"hotend-heatsink-xl-mk4","title":"Hotend Heatsink XL\/MK4","description":"\u003cp style=\"text-align: justify;\"\u003eThe Hotend Heatsink is an original Prusa spare part for the hotend assembly of the Nextruder system, fitted on Prusa MK4, MK4S, MK3.9, MK3.9S, XL, and CORE One range printers. The part ensures thermal dissipation from the upper part of the melt chamber and limits heat creep towards the cold zone of the filament tube, which prevents heat creep and clogging during printing.\u003c\/p\u003e\n\u003ch2\u003eContents and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe delivered assembly includes the hotend heatsink and the original Prusa load cell, a force sensor used by the Nextruder for automatic first-layer calibration and nozzle\/build plate contact detection. Replacement is typically performed in the event of repeated calibration failure, filament clogging due to abnormal heatsink heating, or as preventive maintenance after intensive production use. The part is not compatible with MK3, MK3S, MK3.5\/MK3.5S, MINI, HT90, or Prusa enclosure generations: verify the printer model before ordering.\u003cbr\u003e\u003cbr\u003eInstallation must follow the Prusa repair manual corresponding to the model, available on help.prusa3d.com.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eSpare part\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eHotend heatsink + force sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 × hotend heatsink + 1 × load cell\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eOriginal Prusa Research part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003ePrusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003ePrusa XL\u003c\/li\u003e\n  \u003cli\u003ePrusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003ePrusa CORE One L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899768152,"sku":"IDF__15348_IDS__1574","price":44.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PRUSAHOTENDHEATSINK.png?v=1779206001"},{"product_id":"prusament-petg-900g-refill-nfc-compatible","title":"Prusament PETG 900 g Refill (NFC Compatible)","description":"\u003ch1\u003ePrusament PETG\u003c\/h1\u003e\n\u003cp\u003ePrusament PETG is a 3D filament manufactured in-house by Prusa Research, the Czech 3D printer manufacturer that operates its own extrusion line. The Prusament brand is positioned in the professional and prosumer segment, with control of the chain from polymer granule to spooling. Each spool undergoes individual inspection (diameter, chromatic consistency, mechanical properties) and its manufacturing parameters are viewable online via a unique spool identifier. The stated diameter tolerance is ±0.02 mm, versus 0.05 mm for the usual market standard.\u003c\/p\u003e\n\u003cp\u003ePETG (polyethylene terephthalate glycol) is a thermoplastic valued for its toughness and ductility, superior to PLA whilst remaining simpler to print than ABS. It offers good interlayer adhesion, which suits it to functional parts subject to moderate mechanical stress: brackets, fixings, flanges, technical enclosures. The material's low thermal expansion limits warping, even on large parts printed without an enclosed chamber. PETG also provides acceptable sealing for both indoor and outdoor applications.\u003c\/p\u003e\n\u003cp\u003eFor printing, FFF\/FDM technology should be configured at 250 °C nozzle temperature and 70 to 90 °C on the heated build plate. A textured or satin steel sheet is recommended. Before each print, verify the cleanliness of the build plate surface. As PETG is hygroscopic, store the spool in an airtight container with desiccant after opening; in the event of moisture absorption (bubbles during extrusion, surface quality degradation), dry according to the manufacturer's procedure. Enable retraction to limit stringing, which is the main extrusion defect of this material.\u003c\/p\u003e\n\u003cp\u003eRecommended for the production of functional parts, workshop jigs, watertight prototypes, mechanical supports, parts intended for outdoor use, and large parts sensitive to warping. Not recommended for parts requiring a high level of fine detail (prefer PLA), for long bridges without support (poor bridging characteristics), for food-contact applications without additional certification, or for parts subject to high continuous-service temperatures.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG (polyethylene terephthalate glycol)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003eIn-house production, Czech Republic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFilament diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e70 to 90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended sheet\u003c\/th\u003e\n\u003ctd\u003eTextured or satin steel (powder coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code per spool, parameters viewable online\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e3D printers using FFF\/FDM technology with 1.75 mm filament\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa printers (MK3S+, MK4, MINI+, XL, CORE One)\u003c\/li\u003e\n  \u003cli\u003ePrusa textured and satin steel sheets (powder coating)\u003c\/li\u003e\n  \u003cli\u003eRefill packaging NFC-compatible with existing Prusament spool flanges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Anthracite Grey","offer_id":57202747343192,"sku":"IDF__17613_IDS__3546","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"Jet Black","offer_id":57202747375960,"sku":"IDF__17599_IDS__3542","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Urban Grey","offer_id":57202747408728,"sku":"IDF__17689_IDS__3544","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Clear","offer_id":57202747441496,"sku":"IDF__17615_IDS__3547","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"Signal White","offer_id":57202747474264,"sku":"IDF__17691_IDS__3543","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Black","offer_id":57272955240792,"sku":"IDF__17692_IDS__3545","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/61e65595-f5f6-467a-951a-882210fc0adb.jpg?v=1778574594"},{"product_id":"prusa-nozzle-obxidian","title":"Prusa ObXidian Nozzle","description":"\u003cp\u003eThe Prusa Nozzle ObXidian is a high-quality nozzle specifically designed for the Nextruder. It is manufactured from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suited to printing with abrasive materials such as carbon fibre, as they maintain their hardness even at higher temperatures, delivering excellent performance and extending nozzle service life.\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Acier trempé \/ Cuivre \/ 0.4 mm","offer_id":57272786288984,"sku":"IDF__9203_IDS__1797","price":48.25,"currency_code":"EUR","in_stock":true},{"title":"Acier trempé \/ Cuivre \/ 0.6 mm","offer_id":57272786321752,"sku":"IDF__9207_IDS__1798","price":48.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/cd9aa9e8-4f72-44c1-b3c0-636108475b54.avif?v=1778571502"},{"product_id":"prusament-pla-nfc","title":"Prusament PLA (NFC)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA is a filament manufactured in-house by Prusa Research at its factories in the Czech Republic and Delaware. It is available in a wide palette of colours, including solid matt to satin shades, multi-pigment blends, and glitter-effect variants. Each spool is inspected to meet a dimensional tolerance of ±0.02 mm, with continuous measurement of diameter and ovality along the entire length. Actual manufacturing data (diameter readings, ovality, weight) are recorded and provided per batch, enabling full spool traceability. Colour consistency is guaranteed by a documented spectroscopic recipe and per-batch inspection before despatch.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA extrudes at 215 °C on a heated build plate between 50 and 60 °C, without the need for an enclosed chamber. Its limited shrinkage allows the printing of large or multi-part assemblies without significant deformation, as well as the reproduction of fine geometries, bridges, and overhangs thanks to low-temperature melting combined with rapid cooling. For parts subject to mechanical stress or exposed to elevated temperatures, PETG, ASA, or a PC Blend remains preferable. The material is hard and difficult to sand.\u003c\/p\u003e\n\u003ch2\u003eSpool and NFC identification\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament is delivered on a redesigned spool incorporating a rewritable NFC tag to the open OpenPrintTag standard. This tag contains essential material information and can be read by the Prusa mobile app in offline mode, without dependency on a cloud service. The spool is produced under controlled tension winding and undergoes a final inspection before despatch.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available (solids, blends, glitter effect)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended print sheet\u003c\/th\u003e\n\u003ctd\u003eSmooth PEI, textured, or satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\u003ctd\u003e0.4 mm brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing origin\u003c\/th\u003e\n\u003ctd\u003eCzech Republic \/ Delaware (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n\u003cli\u003ePrint profiles supported for all Prusa FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eNFC tag reading via the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm \/ Anthracite Grey","offer_id":57387823563096,"sku":"IDF__18754_IDS__3443","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Pristine White","offer_id":57387823595864,"sku":"IDF__17752_IDS__3428","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Prusa Orange","offer_id":57387823628632,"sku":"IDF__17708_IDS__3416","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Jet Black","offer_id":57387823661400,"sku":"IDF__17704_IDS__3414","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Lipstick Red","offer_id":57387823726936,"sku":"IDF__17703_IDS__3404","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Azure Blue","offer_id":57387823759704,"sku":"IDF__17627_IDS__3405","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Gravity Grey","offer_id":57387823956312,"sku":"IDF__17736_IDS__3422","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Purple","offer_id":57454177354072,"sku":"IDF__17635_IDS__3413","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Black","offer_id":57454177386840,"sku":"IDF__17702_IDS__3402","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Opal Green","offer_id":57454177419608,"sku":"IDF__17711_IDS__3415","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Silver","offer_id":57454177452376,"sku":"IDF__17631_IDS__3403","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Green","offer_id":57454177485144,"sku":"IDF__17676_IDS__3427","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Marble Grey","offer_id":57454177517912,"sku":"IDF__17740_IDS__3426","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Mystic Green","offer_id":58443393532248,"sku":"3567","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Pristine White","offer_id":57387824316760,"sku":"IDF__17770_IDS__3435","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Prusa Orange","offer_id":57387824349528,"sku":"IDF__17775_IDS__3439","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Jet Black","offer_id":57387824382296,"sku":"IDF__17750_IDS__3438","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Lipstick Red","offer_id":57387824415064,"sku":"IDF__17754_IDS__3430","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Azure Blue","offer_id":57387824447832,"sku":"IDF__17678_IDS__3434","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Army Green","offer_id":57387824480600,"sku":"IDF__17681_IDS__3431","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Gravity Grey","offer_id":57387824513368,"sku":"IDF__17748_IDS__3437","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Galaxy Purple","offer_id":57454177550680,"sku":"IDF__17682_IDS__3432","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Galaxy Black","offer_id":57454177583448,"sku":"IDF__17744_IDS__3429","price":45.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF__18754_IDS__3443.jpg?v=1779971019"},{"product_id":"prusament-petg-carbon-fiber-black-nfc","title":"Prusament PETG Carbon Fibre Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG Carbon Fiber Black is a carbon-fibre-reinforced PETG filament manufactured in-house by Prusa Research in the Czech Republic. The carbon fibre fill improves dimensional stability, temperature resistance and elastic modulus compared with standard PETG, while also significantly reducing stringing.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.02 mm on diameter, monitored at the exit of the extrusion line. The incorporated carbon fibres originate from the recycling of industrial waste and end-of-life carbon composites.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG-CF extrudes at 265 °C on a heated build plate at 90 °C, with a textured or satin sheet recommended for adhesion. As the material is abrasive, a hardened nozzle is required to avoid premature wear of the extrusion tip.\u003cbr\u003e\u003cbr\u003ePrinting is virtually odourless and interlayer adhesion remains strong. The surface finish is matt black. Detail resolution is lower than PLA, and raw mechanical strength is slightly lower than unfilled PETG — the usual trade-off for a carbon-filled composite.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and packaging\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament spools incorporate a rewritable NFC tag compliant with the OpenPrintTag standard, designed to operate offline across different printer ecosystems. Material data is stored directly on the tag and readable via the Prusa mobile app. The redesigned, more compact spool features a locking mechanism that facilitates use in multi-material systems and filament drying.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-reinforced PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e265 °C (±10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e90 °C (±10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eTextured or satin sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003eHardened nozzle required (abrasive material)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eMatt black\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFibre origin\u003c\/th\u003e\n\u003ctd\u003eRecycling of industrial waste and end-of-life carbon composites\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable NFC tag (OpenPrintTag standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003ePrusa Research, Czech Republic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened nozzle\u003c\/li\u003e\n  \u003cli\u003eOptimised for Prusa Research printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-material and multicolour printing systems\u003c\/li\u003e\n  \u003cli\u003eNFC tag compatible with the OpenPrintTag standard (multi-brand reading)\u003c\/li\u003e\n  \u003cli\u003eTag reading via the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm","offer_id":57284898488664,"sku":"IDF__17601_IDS__3504","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusapetgcarbon.jpg?v=1778684059"},{"product_id":"prusament-petg-nfc","title":"Prusament PETG (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG is a professional filament manufactured in-house by Prusa Research in the Czech Republic, available in several opaque and transparent colours. Each spool meets a controlled dimensional tolerance of ±0.02 mm throughout production, guaranteeing consistent extrusion on 1.75 mm FDM printers.\u003cbr\u003e\u003cbr\u003ePETG (polyethylene terephthalate glycol) combines the mechanical strength and durability of a technical polyester with processing characteristics close to PLA: low shrinkage, low thermal deformation, and good interlayer adhesion. More flexible and less brittle than PLA, it offers a slight flex that is useful for parts subject to stress or moderate impact.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 250 ±10 °C on a heated build plate at 80 ±10 °C, without the need for an enclosed chamber. Its very low shrinkage allows the printing of large parts without risk of detachment or warping. The high interlayer adhesion makes it suited to functional parts subject to mechanical stress, technical supports, and applications requiring indoor or outdoor sealing.\u003cbr\u003e\u003cbr\u003ePETG exhibits a tendency to string: pre-drying the filament and appropriate retraction settings help limit this phenomenon. The reproduction of fine details remains inferior to PLA and long bridges are less well controlled. Conversely, the material sands more easily than PLA during post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSpools are fitted with a fully rewritable OpenPrintTag NFC tag, storing material data offline and usable by compatible printers or via the Prusa mobile app. A QR code on the spool gives access to production parameters for each batch (measured tolerance, batch number, manufacturing date) on prusament.com, for complete traceability in series production.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG (polyethylene terephthalate glycol)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e80 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eTextured or satin steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple shades, opaque and transparent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003eIn-house Prusa Research production (Czech Republic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Prusa Research range: MK3S+, MK4, MK4S, MINI+, XL, CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with multicolour and multi-material printing systems accepting the redesigned Prusament spool\u003c\/li\u003e\n  \u003cli\u003eNFC reading compatible with printers supporting the OpenPrintTag standard and the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530342232,"sku":"IDF__17633_IDS__3450","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549478744,"sku":"IDF__17632_IDS__3448","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616358232,"sku":"IDF__17558_IDS__3449","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Signal White \/ 1.75 mm","offer_id":57296716497240,"sku":"IDF__17640_IDS__3458","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Lipstick Red \/ 1.75 mm","offer_id":57296793600344,"sku":"IDF__17581_IDS__3467","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Matte Black \/ 1.75 mm","offer_id":57296819814744,"sku":"IDF__17598_IDS__3469","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Mango Yellow \/ 1.75 mm","offer_id":57297417601368,"sku":"IDF__17570_IDS__3463","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57544658452824,"sku":"IDF__17638_IDS__3455","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Clear \/ 1.75 mm","offer_id":57544839201112,"sku":"IDF__17563_IDS__3456","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange Transparent \/ 1.75 mm","offer_id":57544839299416,"sku":"IDF__17664_IDS__3468","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530375000,"sku":"IDF__17687_IDS__3472","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549511512,"sku":"IDF__17677_IDS__3470","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616391000,"sku":"IDF__17600_IDS__3471","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Anthracite Grey \/ 1.75 mm","offer_id":57299100598616,"sku":"IDF__17611_IDS__3475","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Signal White \/ 1.75 mm","offer_id":57296716530008,"sku":"IDF__17685_IDS__3473","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57544658583896,"sku":"IDF__25082_IDS__3945","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Clear \/ 1.75 mm","offer_id":57544839332184,"sku":"IDF__17591_IDS__3474","price":45.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_petg_urban_grey_1kg.jpg?v=1778828573"},{"product_id":"prusament-pla-refill-nfc-compatible","title":"Prusament PLA Refill (NFC Compatible)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PLA Refill 900g is a premium filament manufactured in-house by Prusa Research, packaged in a refill format without flanges or core. The format is designed to be installed on a previously emptied Prusament spool and is part of the manufacturer's eco-design approach by reducing the amount of packaging material per kilogram of filament delivered.\u003cbr\u003e\u003cbr\u003eThe entire manufacturing process is controlled in-house, with a controlled dimensional tolerance of ±0.02 mm for solid colours (±0.03 mm for blends), guaranteeing consistent extrusion in production. Each refill is NFC-compatible for automatic recognition by equipped printers, and the NFC refill version is not backwards-compatible with the 1 kg cardboard-core refills of the previous generation.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA prints at 215 °C at the nozzle, on a heated build plate at 50–60 °C. Its low thermal expansion allows large parts to be printed without significant warping, and its low melting temperature also makes it suited to small detailed parts. The material does not require an enclosed chamber and accepts smooth PEI, textured or satin steel sheets.\u003c\/p\u003e\n\u003ch2\u003eApplications and limitations\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA remains the easiest material to print, suited to rapid prototyping, concept models, detailed figurines and presentation parts. It has low heat resistance and brittle failure behaviour, which limits its use in functional parts exposed to high temperatures or subject to significant mechanical stress. For these applications, opt for a PETG, ABS or technical material. Each spool is traceable via a QR code giving access to production parameters online at prusament.com. The range is available in several colours.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm (±0.03 mm for blends)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g refill, without flanges or core, NFC-compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSheet compatibility\u003c\/th\u003e\n\u003ctd\u003eSmooth PEI, textured or satin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code per spool, parameters available at prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Original Prusa range (MK3S, MK4, MK4S, XL, CORE One)\u003c\/li\u003e\n  \u003cli\u003ePrinters equipped with an NFC reader for automatic filament recognition\u003c\/li\u003e\n  \u003cli\u003eInstallation on a previously emptied Prusament NFC spool\u003c\/li\u003e\n  \u003cli\u003eNot backwards-compatible with 1 kg cardboard-core refills of the previous generation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.9 kg \/ Azure Blue \/ 1.75 mm","offer_id":57321415639384,"sku":"IDF__17695_IDS__3554","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57321415672152,"sku":"IDF__17743_IDS__3549","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Silver \/ 1.75 mm","offer_id":57321415704920,"sku":"IDF__17690_IDS__3550","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Jet Black \/ 1.75 mm","offer_id":57321415737688,"sku":"IDF__17766_IDS__3551","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Vanilla White \/ 1.75 mm","offer_id":57321415770456,"sku":"IDF__17767_IDS__3552","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Pristine White \/ 1.75 mm","offer_id":57321415803224,"sku":"IDF__17772_IDS__3553","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_pla_azure_blue_refill_900.jpg?v=1779174487"},{"product_id":"prusament-pc-nfc","title":"Prusament PC Blend (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend is a premium polycarbonate filament manufactured in-house by Prusa Research, available in several colours. Its formulation is positioned as an engineering material for functional parts subject to high thermal and mechanical stresses, with a service temperature up to 113 °C and good cold-creep resistance.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.03 mm. A QR code gives access to detailed spool parameters (diameter, ovality, colour, mechanical properties) on prusament.com, for complete traceability in workshop and series production.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePC Blend prints at 275 ±10 °C on a heated build plate at 110 ±10 °C, with a satin steel sheet recommended by the manufacturer. An enclosed chamber or tall brim around the part is advised to limit shrinkage and warping, which are particularly pronounced on large parts despite improved dimensional stability compared with most polycarbonates on the market. The material has low moisture absorption, good electrical insulation properties, and contains no styrene (a non-toxic alternative to ASA). It is intended for advanced users; PLA or PETG is preferable for learning FDM printing.\u003c\/p\u003e\n\u003ch2\u003ePackaging and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eRecent spools are fitted with a fully rewritable OpenPrintTag NFC tag operating offline: the printer automatically recognises the spool and accesses essential material data without dependency on a cloud service or proprietary ecosystem. The redesigned spool incorporates a locking mechanism facilitating removal for use as a refill, and remains stable during filament drying at recommended temperatures. A filament length of approximately 330 m is obtained from a 900 g spool.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePC Blend (polycarbonate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.03 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature (nozzle)\u003c\/th\u003e\n\u003ctd\u003e275 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e110 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eSatin steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart service temperature\u003c\/th\u003e\n\u003ctd\u003eUp to 113 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMoisture absorption\u003c\/th\u003e\n\u003ctd\u003eVery low\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElectrical properties\u003c\/th\u003e\n\u003ctd\u003eGood insulation properties\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eStyrene-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUser level\u003c\/th\u003e\n\u003ctd\u003eAdvanced\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g spool (approx. 330 m of filament)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code with access to spool parameters on prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers accepting nozzle temperatures around 275 °C and bed temperatures around 110 °C\u003c\/li\u003e\n  \u003cli\u003eEnclosed chamber recommended for large parts\u003c\/li\u003e\n  \u003cli\u003ePrusa MK4, MK4S, MK3.9, MK3.9S, XL and CORE One printers\u003c\/li\u003e\n  \u003cli\u003eAutomatic spool recognition on any OpenPrintTag-compatible system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"2 lbs \/ Jet Black \/ 1.75 mm","offer_id":57332195361112,"sku":"IDF__17566_IDS__3495","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Urban Grey \/ 1.75 mm","offer_id":57332195393880,"sku":"IDF__17565_IDS__3496","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Nature \/ 1.75 mm","offer_id":57332195426648,"sku":"IDF__17564_IDS__3497","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Orange \/ 1.75 mm","offer_id":57332195459416,"sku":"IDF__17567_IDS__3498","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Pro Green \/ 1.75 mm","offer_id":57332195492184,"sku":"IDF__17607_IDS__3499","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57332195524952,"sku":"IDF__25072_IDS__3950","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_PC_JET_BLACK_900G.jpg?v=1779262254"},{"product_id":"prusament-pc-blend-carbon-fiber-black-nfc","title":"Prusament PC Blend Carbon Fibre Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend Carbon Fiber is a technical filament manufactured in-house by Prusa Research, based on polycarbonate reinforced with recycled carbon fibres from the production process. This formulation delivers increased rigidity, good dimensional stability and a high service temperature compared with unfilled PC Blend, while remaining easier to print.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.04 mm. Production parameters for each batch (measured diameter, ovality, colour) are accessible online via the QR code on the spool. The filament is available in several colours.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF prints at 285 °C with a heated build plate at 110 °C, without the need for an enclosed chamber thanks to limited shrinkage that allows large models to be printed. A satin or powder-coated TXT steel sheet gives good adhesion; on smooth PEI, apply a thin layer of glue stick to protect the surface.\u003cbr\u003e\u003cbr\u003eUse of a hardened steel nozzle is mandatory: carbon fibres are abrasive and quickly wear out a brass nozzle. The filament does not require pre-drying before printing.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF is intended for technical parts requiring mechanical strength, rigidity and a service temperature up to 114 °C, raised to 130 °C after annealing. It also offers good UV stability and resistance to common chemicals, with a matt surface finish. It is suited to functional components, supports, fixings, workshop tooling and jigs subject to moderate thermal stresses. Note that it remains slightly more brittle than unfilled PC Blend.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-filled PC Blend (PCCF)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e285 °C (range 275–295 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e110 °C (range 100–120 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate\u003c\/th\u003e\n\u003ctd\u003eSatin or powder-coated TXT steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRequired nozzle\u003c\/th\u003e\n\u003ctd\u003eHardened steel mandatory\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 114 °C (130 °C after annealing)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUV stability\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eCommon chemicals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePre-drying before printing\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEnclosed chamber\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e2 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eOpenPrintTag NFC tag (rewritable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened steel nozzle\u003c\/li\u003e\n  \u003cli\u003eOptimised for Prusa MK3S+, MK4, MK4S, XL and CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-material and multicolour systems via OpenPrintTag NFC tag\u003c\/li\u003e\n  \u003cli\u003eDedicated 2 kg spool holder required (not compatible with the standard spool holder)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57332761264472,"sku":"IDF__17588_IDS__3489","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm","offer_id":57332761297240,"sku":"IDF__17616_IDS__3946","price":112.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusament_pc_fiber_black_800.jpg?v=1779269592"},{"product_id":"nextruder-hotend-brass","title":"Nextruder Hotend Brass","description":"\u003cp style=\"text-align: justify;\"\u003eThe Nextruder Hotend brass 0.40 mm is a fully pre-assembled hotend assembly dedicated to the Nextruder extrusion system developed by Prusa Research. Supplied ready to fit, it brings together all the thermal components required for filament melting and deposition on FDM printers equipped with the Nextruder.\u003cbr\u003e\u003cbr\u003eThis spare part enables a complete hotend replacement in a single operation, without having to individually assemble the nozzle, heater block, heater cartridge and thermistor. Several nozzle diameters are available in the range; this reference corresponds to the brass 0.40 mm version.\u003c\/p\u003e\n\u003ch2\u003eComposition and installation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe assembly integrates a 0.40 mm Prusa brass nozzle, a Nextruder aluminium heater block, a 40 W heater cartridge (120 mm) and an NTC 100k thermistor (115 mm). The brass nozzle is suited to extrusion of non-abrasive filaments (PLA, PETG, ABS, ASA, PC). For fibre-filled (carbon, glass) or abrasive materials, a hardened steel nozzle should be used instead. Installation is carried out according to the Prusa repair manual for the relevant printer model, available on the manufacturer's online knowledge base.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eFully pre-assembled hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle material\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeater block\u003c\/th\u003e\n\u003ctd\u003eAluminium, Nextruder-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeater cartridge\u003c\/th\u003e\n\u003ctd\u003e40 W, length 120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermistor\u003c\/th\u003e\n\u003ctd\u003eNTC 100k, length 115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended filaments\u003c\/th\u003e\n\u003ctd\u003eNon-abrasive (PLA, PETG, ABS, ASA, PC, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MK3.9S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Laiton \/ 0.4 mm","offer_id":57332806877528,"sku":"IDF__14511_IDS__1592","price":45.75,"currency_code":"EUR","in_stock":true},{"title":"Laiton \/ 0.6 mm","offer_id":57332806910296,"sku":"IDF__14513_IDS__1594","price":45.75,"currency_code":"EUR","in_stock":true},{"title":"Laiton \/ 0.8 mm","offer_id":57335045357912,"sku":"IDF__14515_IDS__1595","price":45.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/NEXTRUDER_HOTEND_BRASS_04.jpg?v=1779278385"},{"product_id":"prusa-nozzle-brass-cht","title":"Prusa Nozzle Brass CHT","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Nozzle brass CHT 0.4 mm is a high-flow brass nozzle dedicated to the Nextruder extrusion system developed by Prusa Research. It incorporates CHT (Core Heating Technology), which splits the melt channel into several sub-channels to increase the thermal exchange surface with the filament and improve heating homogeneity.\u003cbr\u003e\u003cbr\u003eThis results in a higher volumetric throughput than a conventional brass nozzle of the same diameter, useful for high-speed printing or large parts without compromising extrusion quality.\u003c\/p\u003e\n\u003ch2\u003eDesign and installation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe nozzle is all-metal in design: it combines the nozzle and heat break into a single piece, eliminating any PTFE tube in the filament path within the Nextruder. This architecture improves long-term extrusion reliability and allows fast nozzle changes without fully disassembling the hotend. The brass material is suited to non-abrasive filaments (PLA, PETG, ABS, ASA, PC, etc.); for fibre-filled or abrasive materials, a hardened steel version should be used. Several diameters are available in the range.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eAll-metal high-flow nozzle (integrated nozzle + heat break)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eCHT (Core Heating Technology) – multi-channel heating\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFilament path\u003c\/th\u003e\n\u003ctd\u003eAll-metal, PTFE-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended filaments\u003c\/th\u003e\n\u003ctd\u003eNon-abrasive (PLA, PETG, ABS, ASA, PC, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\u003ctd\u003e1 nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ high-flow printing accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n  \u003cli\u003eCompatible with V6-format nozzles via the Nextruder V6 adapter (sold separately)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Laiton \/ 0.4 mm","offer_id":57335236002136,"sku":"IDF__14517_IDS__2329","price":23.25,"currency_code":"EUR","in_stock":true},{"title":"Laiton \/ 0.6 mm","offer_id":57335251403096,"sku":"IDF__14518_IDS__2330","price":23.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_Nozzle_brass_CHT_04.jpg?v=1779280397"},{"product_id":"prusa-nozzle-brass","title":"Prusa Nozzle Brass","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Nozzle brass is a high-precision brass nozzle designed by Prusa Research for the Nextruder extrusion system. It features an all-metal architecture integrating nozzle and heat break in a single piece, eliminating any PTFE tube in the filament path within the hotend.\u003cbr\u003e\u003cbr\u003eThis one-piece design improves long-term extrusion reliability and allows fast nozzle changes without fully disassembling the hotend, making it a suitable reference for series production or prototyping workshop use. Several diameters are available in the range to cover both surface quality and throughput requirements.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe brass nozzle is suited to common non-abrasive filaments (PLA, PETG, ABS, ASA, PC, etc.). For fibre-filled (carbon, glass) or abrasive materials, a hardened steel version should be used. Replacement is carried out according to the Prusa assembly manual for the relevant printer model, available on the manufacturer's online knowledge base. For users with V6-format nozzles, the dedicated Nextruder V6 adapter allows the existing stock to be retained.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eAll-metal nozzle (integrated nozzle + heat break)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBrass\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable diameters in the range\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFilament path\u003c\/th\u003e\n\u003ctd\u003eAll-metal, PTFE-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended filaments\u003c\/th\u003e\n\u003ctd\u003eNon-abrasive (PLA, PETG, ABS, ASA, PC, etc.)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\u003ctd\u003e1 nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ extrusion consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n  \u003cli\u003eCompatible with V6-format nozzles via the Nextruder V6 adapter (sold separately)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Laiton \/ 0.4 mm","offer_id":57335544283480,"sku":"IDF__10795_IDS__1526","price":18.33,"currency_code":"EUR","in_stock":true},{"title":"Laiton \/ 0.6 mm","offer_id":57335544316248,"sku":"IDF__10797_IDS__1527","price":18.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PRUSA_NOZZLE_BRASS_04.jpg?v=1779282592"},{"product_id":"buse-v6","title":"V6 Nozzle","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa V6 Nozzle is a replacement nozzle for E3D V6 hotend systems used on several compatible FDM 3D printers. Machined for stable material flow, it ensures regular deposition of standard and technical thermoplastics in prototyping, functional manufacturing and small-series production operations.\u003cbr\u003e\u003cbr\u003eThis type of nozzle is used to adjust the trade-off between detail level, print speed and extrusion throughput according to manufacturing requirements. Several variants and dimensions are available to adapt the print configuration to the materials and geometries produced.\u003c\/p\u003e\n\u003ch2\u003eExtrusion behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe internal geometry of the nozzle directly influences the stability of the molten polymer flow, extrusion pressure and the quality of deposited layers. V6-type nozzles are designed to work with E3D-compatible hotends and ensure homogeneous temperature rise in the melt zone.\u003cbr\u003e\u003cbr\u003eThey are suited to FDM use cases requiring simple maintenance and fast replacement of extrusion consumables. The choice of variant depends on the level of detail sought, print time and the behaviour of the material used.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and material compatibility\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePeriodic nozzle replacement limits the dimensional deviations associated with internal wear, particularly when using fibre-filled or abrasive filaments. A nozzle in good condition also helps preserve extrusion regularity and interlayer adhesion on long-duration prints.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eHotend nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eE3D V6 compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eExtrusion and deposition of thermoplastic filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDirect replacement on compatible hotend\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial compatibility\u003c\/th\u003e\n\u003ctd\u003eStandard and technical filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable variants\u003c\/th\u003e\n\u003ctd\u003eSeveral dimensions available for different printing applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM 3D printers equipped with an E3D V6 hotend\u003c\/li\u003e\n\u003cli\u003eCompatible with Prusa extrusion systems\u003c\/li\u003e\n\u003cli\u003eCompatible with Original Prusa MK2\u003c\/li\u003e\n\u003cli\u003eCompatible with Original Prusa MK3\u003c\/li\u003e\n\u003cli\u003eCompatible with Original Prusa MK3S\u003c\/li\u003e\n\u003cli\u003eCompatible with Original Prusa MK3S+\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Laiton \/ 0.25 mm","offer_id":57336378753368,"sku":"IDF__5430_IDS__916","price":4.91,"currency_code":"EUR","in_stock":true},{"title":"Laiton \/ 0.6 mm","offer_id":57336378786136,"sku":"IDF__5433_IDS__945","price":4.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_buse_v6_025.png?v=1779290178"},{"product_id":"prusa-uss-drybox","title":"Prusa Pro HT90 Drybox","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Pro HT90 Drybox is a storage and feeding station designed to maintain technical filaments in a low-humidity environment during FDM production phases. Developed for moisture-sensitive materials, it limits extrusion behaviour variations caused by water absorption, particularly for technical polymers used in industrial environments.\u003cbr\u003e\u003cbr\u003eThe system enables direct feeding of the printer from the sealed enclosure to preserve filament stability throughout the print cycle. The design is optimised for prototyping workshops, R\u0026amp;D environments and production applications requiring controlled extrusion regularity with technical materials.\u003c\/p\u003e\n\n\u003ch2\u003eHumidity management\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThe Drybox uses a passive humidity control system combined with a hermetic compartment for spool storage. This configuration reduces the risks of bubbling, surface defects and layer weakening caused by moisture absorbed by certain hygroscopic thermoplastics.\u003cbr\u003e\u003cbr\u003eIt is particularly suited to filled filaments, high-temperature polymers and materials requiring stable storage conditions between print cycles. Spool access remains compatible with continuous use in a production environment.\u003c\/p\u003e\n\n\u003ch2\u003eImplementation in a professional environment\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThe structure is designed for direct integration into a professional FDM additive manufacturing workflow. Filament feeding to the printer is performed without intermediate handling to minimise exposure to ambient air. The solution can be used both during prototyping and for small-series production requiring more stable material conditions.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eFDM filament drybox\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFilament storage and feeding under low humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eProfessional FDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial compatibility\u003c\/th\u003e\n\u003ctd\u003eHygroscopic filaments and technical materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStructure\u003c\/th\u003e\n\u003ctd\u003eSealed enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eAll FDM 3D printers using external spools\u003c\/li\u003e\n  \u003cli\u003eCompatible with moisture-sensitive technical filaments\u003c\/li\u003e\n  \u003cli\u003eCompatible with Prusa production environments\u003c\/li\u003e\n  \u003cli\u003eCompatible with prototyping workshops and professional additive manufacturing lines\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"With","offer_id":57367437115736,"sku":"IDF__987654321_IDS__3940","price":34.49,"currency_code":"EUR","in_stock":true},{"title":"Without","offer_id":57367437148504,"sku":"IDF__18027_IDS__3939","price":27.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/38328cc8dab3c74b027b52016cfb0352.jpg?v=1787299881"},{"product_id":"fire-suppression-system-for-original-prusa-mini-enclosure","title":"Fire Suppression System for Original Prusa MINI Enclosure","description":"\u003ch2\u003eThermal protection of FDM enclosures\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis fire suppression system is designed for 3D printing enclosures used with Original Prusa MINI printers. It relies on a pressurised heat-sensitive tube capable of detecting an abnormal rise in temperature and automatically releasing the extinguishing agent into the protected volume.\u003cbr\u003e\u003cbr\u003eThis approach adds an extra layer of safety in prototyping, continuous production or assisted manufacturing environments requiring prolonged operation of the heating elements.\u003c\/p\u003e \u003ch2\u003eIntegration and installation in a professional environment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe kit includes the items required for installation in a compatible enclosure: fixing system, fasteners, user documentation and signage elements. Its format is suited to closed cabinets dedicated to FDM printing and facilitates clean integration into workshops, R\u0026amp;D laboratories or technical manufacturing spaces.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eStandalone fire suppression system\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eEnclosure protection for 3D printer\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMain compatibility\u003c\/th\u003e\n\u003ctd\u003eOriginal Prusa MINI Enclosure\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTrigger\u003c\/th\u003e\n\u003ctd\u003ePressurised heat-sensitive tube\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eKit contents\u003c\/th\u003e\n\u003ctd\u003eFixing system, fasteners, user manual, signage elements\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eEnclosures for FDM 3D printers\u003c\/li\u003e \u003cli\u003eClosed printing cabinets for professional use\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MINI Enclosure\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57395976831320,"sku":"IDF__16215_IDS__3682","price":107.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/6056fad4-8825-4aea-b440-cedaabd17bec.jpg?v=1780068063"},{"product_id":"hotend-ptfe-tube-mk3s-mmu2s","title":"Hotend PTFE tube (MK3S+, MMU2S)","description":"\u003ch2\u003eFunction and use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe PTFE tube guides the filament inside the hotend, between the entry point and the melt zone. Polytetrafluoroethylene has a very low coefficient of friction, which reduces resistance to filament feed and promotes smooth extrusion.\u003cbr\u003e\u003cbr\u003eAs a wear part, it should be replaced periodically; a deformed or scored tube can cause extrusion defects. Installation follows the procedure in the Prusa repair manual for the relevant printer model.\u003c\/p\u003e\n\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe tube has a length of 42.3 mm (tolerance ± 0.2 mm), an inner diameter of 1.85 mm suited to filament passage, and an outer diameter of 4 mm. These dimensions are specific to the hotend of the MK3S+ and MK3S+ with MMU2S.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHotend PTFE tube (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePTFE (polytetrafluoroethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e42.3 mm (± 0.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInner diameter\u003c\/th\u003e\n\u003ctd\u003e1.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOuter diameter\u003c\/th\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa MK3S+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3S+ with MMU2S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518473740632,"sku":"IDF__5514_IDS__381","price":1.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/521.jpg?v=1781529285"},{"product_id":"filament-sensor-einsy-cable","title":"Filament sensor-Einsy cable","description":"\u003ch2\u003eFunction\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis cable connects the filament sensor to the printer's Einsy control board. It carries the sensor signal, used to detect the presence of filament and signal a spool run-out or jam, functions that allow the print to pause automatically.\u003cbr\u003e\u003cbr\u003eAs a spare part, it replaces a damaged or faulty cable causing filament detection errors.\u003c\/p\u003e\n\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out following the procedure in the Prusa repair manual for the relevant printer model, available in the manufacturer's knowledge base. The product includes one cable.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFilament sensor to Einsy cable (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eConnection between the filament sensor and the Einsy board\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa MK3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518520172888,"sku":"IDF__1503_IDS__349","price":3.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/487.jpg?v=1781530126"},{"product_id":"heatbed-thermistor-set-mk3-s-mini","title":"Heatbed thermistor set (MK3\/S\/+, MINI\/+)","description":"\u003ch2\u003eFunction and contents\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe thermistor measures the temperature of the heated bed and sends the information to the printer's control system, which maintains the set temperature during printing. A faulty thermistor causes temperature reading errors and print stoppages.\u003cbr\u003e\u003cbr\u003eThe kit includes the thermistor, a Kapton tape, and an aluminium tape for fitting it to the bed. The cable is fitted with a Molex 5057-9402 connector.\u003c\/p\u003e\n\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out following the procedure in the Prusa repair manual for the relevant printer model, available in the manufacturer's knowledge base. Fitting with the supplied tapes ensures good thermal contact with the bed.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHeated bed thermistor (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnector\u003c\/th\u003e\n\u003ctd\u003eMolex 5057-9402\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e650 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eKit contents\u003c\/th\u003e\n\u003ctd\u003e1 thermistor, 1 Kapton tape, 1 aluminium tape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa MK2 \/ MK2S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK2.5 \/ MK2.5S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3 \/ MK3S \/ MK3S+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MINI \/ MINI+\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518534164824,"sku":"IDF__3728_IDS__374","price":4.83,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/514.jpg?v=1781530659"},{"product_id":"heatbed-einsy-power-cable-screw-attached","title":"Heatbed-Einsy power cable (screw-attached)","description":"\u003ch2\u003eFunction\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis cable supplies power to the heated bed from the Einsy control board. It carries the current needed to bring the bed up to temperature and maintain it during printing.\u003cbr\u003e\u003cbr\u003eAs a spare part, it replaces a worn or damaged cable that can cause heating faults or power cuts. This version connects via screws and is intended for heated beds fitted with a removable power cable.\u003c\/p\u003e\n\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out following the procedure in the Prusa repair manual for the relevant printer model, available in the manufacturer's knowledge base. The product includes one cable.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHeated bed power cable to Einsy (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFitting\u003c\/th\u003e\n\u003ctd\u003eScrew-attached\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003ePower supply to the heated bed from the Einsy board\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa MK3\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3S+\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518557430104,"sku":"IDF__2015_IDS__354","price":4.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/492.jpg?v=1781531295"},{"product_id":"heatbed-wiring-red-wire","title":"Heatbed wiring (red wire)","description":"\u003ch2\u003eFunction\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis wire supplies power to the heated bed: the red conductor is used as the VCC line (positive pole). It carries the current needed to heat the bed during printing.\u003cbr\u003e\u003cbr\u003eFull assembly of the heated bed requires both wires, red and black; this product includes only the red wire. As a spare part, it replaces a worn or damaged conductor.\u003c\/p\u003e\n\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out following the procedure in the Prusa repair manual for the relevant printer model, available in the manufacturer's knowledge base. The product includes one red wire.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHeated bed wiring, red wire (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eVCC power conductor for the heated bed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 red wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa MK3.5 \/ MK3.5S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 \/ MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 \/ MK4S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518567457112,"sku":"IDF__7365_IDS__2091","price":1.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/834c924f-9fc3-4040-8ba1-2307f21a5e52.jpg?v=1781531572"},{"product_id":"heatbed-wiring-black-wire","title":"Heatbed wiring (black wire)","description":"\u003ch2\u003eFunction\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis wire provides the electrical return for the heated bed: the black conductor is used as the GND line (ground). Paired with the red VCC wire, it completes the power circuit needed to heat the bed during printing.\u003cbr\u003e\u003cbr\u003eFull assembly of the heated bed requires both wires, black and red; this product includes only the black wire. As a spare part, it replaces a worn or damaged conductor.\u003c\/p\u003e\n\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out following the procedure in the Prusa repair manual for the relevant printer model, available in the manufacturer's knowledge base. The product includes one black wire.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eHeated bed wiring, black wire (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eGround (GND) conductor for the heated bed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 black wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa MK3.5 \/ MK3.5S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 \/ MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 \/ MK4S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518633976152,"sku":"IDF__7364_IDS__2065","price":1.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/8d2f4bcc-f311-43eb-a6cd-a177d11eac20.jpg?v=1781532417"},{"product_id":"thermistor-ntc-100k-260-mm","title":"Thermistor NTC 100k-260 mm","description":"\u003ch2\u003eFunction\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe NTC 100k thermistor is a temperature sensor whose resistance decreases as temperature increases. Fitted at the heater block, it measures the nozzle temperature and sends the information to the control system, which maintains the set temperature during printing.\u003cbr\u003e\u003cbr\u003eA faulty thermistor causes temperature reading errors and the print to stop. As a spare part, it replaces a worn or failed sensor.\u003c\/p\u003e\n\n\u003ch2\u003eUse\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe 260 mm cable connects the thermistor to the printer's electronics. Replacement is carried out following the procedure in the Prusa repair manual for the relevant printer model, available in the manufacturer's knowledge base.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eNTC thermistor (spare part)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNominal resistance\u003c\/th\u003e\n\u003ctd\u003e100 kΩ (NTC)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e260 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 thermistor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa CORE One\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One+\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57518648820056,"sku":"IDF__15154_IDS__3120","price":10.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/3f5ec5b1-12f3-43ee-b8b6-dcb6cbfc9e13.jpg?v=1781683780"},{"product_id":"indx-4-8-tool-conversion-kit-for-core-one-l-l","title":"INDX 4\/8-Tool Conversion Kit for CORE One L\/L+","description":"\u003ch2\u003ePrincipe et capacités\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eL'INDX associe une tête active (Smart Head), équipée d'un chauffage par induction sans contact et d'une détection de température sans fil, à des outils passifs sans électronique embarquée, ce qui limite le coût d'ajout de nouveaux outils. Un capteur de force intégré à la buse mesure la position du plateau avant chaque impression, sans recalibrage nécessaire lors des changements d'outil ou de buse.\u003cbr\u003e\u003cbr\u003eCe système permet de combiner matériaux rigides et flexibles, d'utiliser des supports solubles ou faciles à retirer, de changer de taille de buse en cours d'impression et de réaliser des impressions multicolores avec un minimum de déchet de matière.\u003c\/p\u003e\n\u003ch2\u003eInstallation et compatibilité matériaux\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eCe kit de conversion s'installe sur une CORE One L\/L+ existante ; l'installation nécessite le démontage d'une partie de la machine et le remplacement de l'extrudeur, pour une durée estimée par les utilisateurs à 5-6 heures. Le volume d'impression obtenu après installation est de 298 × 275 × 330 mm.\u003cbr\u003e\u003cbr\u003eLes buses fournies (nitrurées, surface durcie) conviennent à la plupart des matériaux non abrasifs (PLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH) jusqu'à 300 °C ; elles ne sont pas conçues pour un usage prolongé avec des matériaux abrasifs.\u003c\/p\u003e\n\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eKit de conversion changeur d'outils (toolchanger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFabricant\u003c\/th\u003e\n\u003ctd\u003eBondtech (INDX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNombre de têtes\u003c\/th\u003e\n\u003ctd\u003e4 ou 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemps de changement d'outil\u003c\/th\u003e\n\u003ctd\u003eEnviron 12 secondes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDéchet par changement\u003c\/th\u003e\n\u003ctd\u003eEnviron 0,013 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTempérature maximale de buse\u003c\/th\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètre filament\u003c\/th\u003e\n\u003ctd\u003e1,75 mm, toute marque, sans puce de bobine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètres de buse compatibles\u003c\/th\u003e\n\u003ctd\u003e0,25 \/ 0,4 \/ 0,5 \/ 0,6 \/ 0,8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuses fournies\u003c\/th\u003e\n\u003ctd\u003e0,4 mm haut débit, acier nitruré à surface durcie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact sur le volume d'impression\u003c\/th\u003e\n\u003ctd\u003e-2 mm en X, -15 mm en Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVolume d'impression après installation\u003c\/th\u003e\n\u003ctd\u003e298 × 275 × 330 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePoids et dimensions (kit installé)\u003c\/th\u003e\n\u003ctd\u003e23,9 kg ; 600 × 530 × 770 mm (l × p × h)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibilité\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal Prusa CORE One L et CORE One L+\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"CORE One L \/ Conversion vers 8 têtes d'impression","offer_id":58292607385944,"sku":"IDF__987654321_IDS__4345","price":832.5,"currency_code":"EUR","in_stock":true},{"title":"CORE One L \/ Conversion vers 4 têtes d'impression","offer_id":58292607418712,"sku":"IDF__987654321_IDS__4346","price":626.58,"currency_code":"EUR","in_stock":true},{"title":"CORE One L+ \/ Conversion vers 8 têtes d'impression","offer_id":58292607451480,"sku":"IDF__28418_IDS__4344","price":815.83,"currency_code":"EUR","in_stock":true},{"title":"CORE One L+ \/ Conversion vers 4 têtes d'impression","offer_id":58292607484248,"sku":"IDF__28417_IDS__4343","price":607.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/98aa98d8-e329-4001-a912-135993bbac3d.jpg?v=1787843476"},{"product_id":"indx-4-8-tool-conversion-kit-for-core-one-core-one-gen2","title":"INDX 4\/8-Tool Conversion Kit for CORE One+ \/CORE One+ (Gen2)","description":"\u003ch2\u003ePrincipe et capacités\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eL'INDX associe une tête active (Smart Head), équipée d'un chauffage par induction sans contact et d'une détection de température sans fil, à des outils passifs sans électronique embarquée. Chaque changement d'outil purge environ 13 mg de plastique pour stabiliser la pression dans la buse, sans nécessiter de tour de nettoyage : la zone d'impression utilisable atteint ainsi 248 × 205 × 270 mm.\u003cbr\u003e\u003cbr\u003eLe grip d'entraînement s'ajuste automatiquement selon la souplesse du matériau, ce qui permet d'alterner entre TPU et filaments techniques rigides sans réglage manuel. Le système d'aération propre à la CORE One+ permet de conserver les portes de l'enceinte fermées même pour l'impression de PLA ou de PETG.\u003c\/p\u003e\n\u003ch2\u003eInstallation et compatibilité matériaux\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eCe kit de conversion s'installe sur une CORE One+ existante ; les plaques d'impression, la collection de filaments, les profils PrusaSlicer et la configuration Prusa Connect existants restent utilisables. Un système de calibration du décalage de tête, monté en permanence hors de la zone d'impression, calibre chaque tête en 15 secondes.\u003cbr\u003e\u003cbr\u003eLes buses fournies (haut débit CHT, acier nitrocarburé à surface durcie) conviennent à la plupart des matériaux non abrasifs (PLA, PETG, ASA, ABS, PC, PA, TPU, PVA, BVOH) jusqu'à 300 °C ; elles supportent jusqu'à 10 kg de PETG-CF, 5 kg de PC-CF ou 0,5 kg de Prusament Ultraglow avant d'affecter la qualité d'impression.\u003c\/p\u003e\n\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eKit de conversion changeur d'outils (toolchanger)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFabricant\u003c\/th\u003e\n\u003ctd\u003eBondtech (INDX)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNombre de têtes\u003c\/th\u003e\n\u003ctd\u003e4 ou 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTemps de changement d'outil\u003c\/th\u003e\n\u003ctd\u003eEnviron 12 secondes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDéchet par changement\u003c\/th\u003e\n\u003ctd\u003eEnviron 13 mg (0,013 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTempérature maximale de buse\u003c\/th\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètre filament\u003c\/th\u003e\n\u003ctd\u003e1,75 mm, toute marque\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètres de buse compatibles\u003c\/th\u003e\n\u003ctd\u003e0,25 \/ 0,4 \/ 0,5 \/ 0,6 \/ 0,8 \/ 1,0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuses fournies\u003c\/th\u003e\n\u003ctd\u003eHaut débit (CHT), acier nitrocarburé\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAccouplement d'outils\u003c\/th\u003e\n\u003ctd\u003eAccouplement mécanique Maxwell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact sur le volume d'impression\u003c\/th\u003e\n\u003ctd\u003e-2 mm en X, -15 mm en Y\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVolume d'impression après installation\u003c\/th\u003e\n\u003ctd\u003e248 × 205 × 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCalibration de tête\u003c\/th\u003e\n\u003ctd\u003e15 secondes par tête, système à double cible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibilité\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOriginal Prusa CORE One+ et CORE One+ (Gen 2)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"CORE One\/+ \/ Conversion vers 8 têtes d'impression","offer_id":58293323497816,"sku":"IDF__987654321_IDS__4249","price":790.83,"currency_code":"EUR","in_stock":true},{"title":"CORE One\/+ \/ Conversion vers 4 têtes d'impression","offer_id":58293323530584,"sku":"IDF__987654321_IDS__4248","price":599.17,"currency_code":"EUR","in_stock":true},{"title":"CORE One+ (Gen 2) \/ Conversion vers 8 têtes d'impression","offer_id":58293323563352,"sku":"IDF__26168_IDS__3954","price":749.17,"currency_code":"EUR","in_stock":true},{"title":"CORE One+ (Gen 2) \/ Conversion vers 4 têtes d'impression","offer_id":58293323596120,"sku":"IDF__26167_IDS__3944","price":557.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/572ff593-4905-4016-9621-ace5ce308af1.jpg?v=1787846856"},{"product_id":"original-prusa-xl-enclosure-to-enclosure-for-prusa-xl","title":"Original Prusa XL Enclosure to Enclosure for Prusa XL+","description":"\u003ch2\u003eFonction et température de chambre\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLes grandes pièces en ASA, ABS, PC et nylon rétrécissent en refroidissant ; un air ambiant froid et courant d'air peut soulever les angles et compromettre l'impression. Cette enceinte améliore l'étanchéité par rapport à la version XL standard, ce qui permet d'atteindre environ 50 °C dans la chambre grâce au seul plateau chauffant de la XL+, réduisant le risque de déformation sur les pièces en ASA, ABS, PC, nylon et PC-CF.\u003cbr\u003e\u003cbr\u003eUn module de chauffage externe à venir permettra de pousser la température jusqu'à environ 60 °C, une plage recommandée pour le polycarbonate et les grandes pièces en nylon. Un soufflet magnétique repliable ouvre la chambre pour une meilleure circulation d'air lors de l'impression de PLA ou de PETG, sans occuper d'espace au sol comme une porte battante.\u003c\/p\u003e\n\n\u003ch2\u003eFiltration et intégration\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLe système de filtration avancé aspire l'air de la chambre et le fait passer à travers un filtre HEPA à 99,9 % d'efficacité, ce qui réduit les odeurs et les particules ultrafines lors de l'impression d'ABS, d'ASA ou de PA. La filtration se pilote depuis l'écran de l'imprimante, y compris la durée de fonctionnement post-impression.\u003cbr\u003e\u003cbr\u003eL'enceinte se connecte à la carte mère de la XL+ : l'écran tactile permet de régler la performance de filtration, de vérifier la durée de vie du filtre HEPA, de piloter les bandeaux LED et de lire la température de la chambre. Livrée en kit complet avec cadre métallique, panneaux, aimants, joint d'étanchéité de porte et visserie, elle ne nécessite aucune pièce imprimée.\u003c\/p\u003e\n\n\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eEnceinte fermée avec filtration, accessoire\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions installées\u003c\/th\u003e\n\u003ctd\u003e700 × 900 × 720 mm (L × H × P)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eType de chauffage\u003c\/th\u003e\n\u003ctd\u003ePassif (via le plateau chauffant de la XL+), compatible avec un module de chauffage externe à venir\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de chambre\u003c\/th\u003e\n\u003ctd\u003eJusqu'à environ 50 °C (plateau seul), jusqu'à 60 °C avec module externe\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eSystème de filtration avancé, HEPA 99,9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids\u003c\/th\u003e\n\u003ctd\u003e15,7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutils requis\u003c\/th\u003e\n\u003ctd\u003eTorx T10, clés Allen 1,5 et 2,5 mm, pince à becs fins, clé universelle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibilité\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa XL+ uniquement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58293447197016,"sku":"IDF__28326_IDS__4185","price":190.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/8e677821-33c3-41dc-9887-39574938f9e9.jpg?v=1787849469"},{"product_id":"enclosure-for-prusa-xl","title":"Enclosure for Prusa XL+","description":"\u003ch2\u003eFonction et température de chambre\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLes grandes pièces en ASA, ABS, PC et nylon rétrécissent en refroidissant ; un air ambiant froid et courant d'air peut soulever les angles et compromettre l'impression. Cette enceinte, conçue spécifiquement pour la XL+, permet d'atteindre environ 50 °C dans la chambre grâce au seul plateau chauffant, réduisant le risque de déformation sur les pièces en ASA, ABS, PC, nylon et PC-CF.\u003cbr\u003e\u003cbr\u003eUn module de chauffage externe à venir permettra de pousser la température jusqu'à environ 60 °C, une plage recommandée pour le polycarbonate et les grandes pièces en nylon. Un soufflet magnétique repliable ouvre la chambre pour une meilleure circulation d'air lors de l'impression de PLA ou de PETG, sans occuper d'espace au sol comme une porte battante.\u003c\/p\u003e\n\n\u003ch2\u003eFiltration et intégration\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLe système de filtration avancé aspire l'air de la chambre et le fait passer à travers un filtre HEPA à 99,9 % d'efficacité, ce qui réduit les odeurs et les particules ultrafines lors de l'impression d'ABS, d'ASA ou de PA. La filtration se pilote depuis l'écran de l'imprimante, y compris la durée de fonctionnement post-impression.\u003cbr\u003e\u003cbr\u003eL'enceinte se connecte à la carte mère de la XL+ : l'écran tactile permet de régler la performance de filtration, de vérifier la durée de vie du filtre HEPA, de piloter les bandeaux LED et de lire la température de la chambre. Le cadre métallique intègre des points de fixation pour caméras et électronique, ainsi qu'un cheminement de câbles soigné ; elle réduit également le bruit de l'imprimante.\u003c\/p\u003e\n\n\u003ch2\u003eContenu et mise en œuvre\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLe kit comprend les pièces du cadre métallique, les panneaux latéraux transparents, les panneaux supérieur et avant, le soufflet magnétique, le capteur de température, le bandeau LED et son câblage, la visserie et le renfort de cadre imprimante, ainsi que le manuel de montage. Aucune imprimante 3D n'est incluse.\u003c\/p\u003e\n\n\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eEnceinte fermée avec filtration, accessoire complet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions installées\u003c\/th\u003e\n\u003ctd\u003e700 × 900 × 720 mm (L × H × P)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eType de chauffage\u003c\/th\u003e\n\u003ctd\u003ePassif (via le plateau chauffant de la XL+), compatible avec un module de chauffage externe à venir\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTempérature de chambre\u003c\/th\u003e\n\u003ctd\u003eJusqu'à environ 50 °C (plateau seul), jusqu'à 60 °C avec module externe\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eSystème de filtration avancé, HEPA 99,9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids\u003c\/th\u003e\n\u003ctd\u003e15,7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutils requis\u003c\/th\u003e\n\u003ctd\u003eTorx T10, clés Allen 1,5 et 2,5 mm, pince à becs fins, clé universelle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibilité\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa XL+ uniquement (non compatible avec la XL standard)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58293479342424,"sku":"IDF__28325_IDS__4183","price":649.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/dfb3faec-c3b3-4c53-ba6b-1e34d8e97522.jpg?v=1787849970"},{"product_id":"original-prusa-xl-enclosure","title":"Original Prusa XL Enclosure","description":"\u003ch2\u003eFonction et intégration\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eCette enceinte crée un environnement d'impression stable à température élevée, protégeant l'imprimante des courants d'air froid. Elle facilite l'impression de matériaux techniques exigeants, sujets à la déformation, tels que le PCCF, le nylon ou le PP, et réduit l'accumulation de poussière sur les pièces mobiles.\u003cbr\u003e\u003cbr\u003eDirectement connectée à la carte mère de l'imprimante, elle se configure depuis l'écran tactile de la XL : réglage de la performance de filtration et de sa durée après impression, pilotage des bandeaux LED et suivi de la durée de vie du filtre HEPA. Le chauffage est assuré uniquement par le plateau chauffant de l'imprimante (type passif).\u003c\/p\u003e\n\n\u003ch2\u003eFiltration et soufflet\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLe système de filtration avancé, particulièrement utile pour le PC Blend Carbon Fiber et les matériaux générant des particules, aspire l'air par le bas et le refoule à travers le filtre HEPA. Pour les matériaux moins odorants (PLA, PETG), la filtration automatique n'est pas activée par défaut afin de préserver la durée de vie du filtre, mais reste activable manuellement.\u003cbr\u003e\u003cbr\u003eUn soufflet magnétique en polyester et polyuréthane, repliable rapidement, améliore la circulation d'air pour les matériaux qui préfèrent un environnement plus frais comme le PLA, sans occuper d'espace au sol comme une porte battante.\u003c\/p\u003e\n\n\u003ch2\u003eContenu et mise en œuvre\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eLivrée démontée en kit, l'enceinte comprend les pièces du cadre, les panneaux latéraux transparents, les panneaux supérieur et inférieur, le soufflet magnétique, la visserie, le renfort de cadre imprimante, des pièces de remplacement en PCCF (plus résistantes à la chaleur) pour certains composants plastiques de l'imprimante (Nextruder, support de courroie), le capteur de température, le bandeau LED et la documentation.\u003c\/p\u003e\n\n\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eEnceinte fermée avec filtration, accessoire (kit à monter)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions installées\u003c\/th\u003e\n\u003ctd\u003e700 × 900 × 720 mm (L × H × P)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eType de chauffage\u003c\/th\u003e\n\u003ctd\u003ePassif (plateau chauffant de l'imprimante uniquement)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFiltration\u003c\/th\u003e\n\u003ctd\u003eSystème de filtration avancé, HEPA 99,9 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePoids\u003c\/th\u003e\n\u003ctd\u003e15,7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOutils requis\u003c\/th\u003e\n\u003ctd\u003eTorx T10, clés Allen 1,5 et 2,5 mm, pince à becs fins, clé universelle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibilité\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eOriginal Prusa XL uniquement (non compatible avec la XL+)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58293499887960,"sku":"IDF__13769_IDS__2043","price":607.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/e909a341-53fe-4310-aeb0-04142597fe26.jpg?v=1787850189"},{"product_id":"prusament-petg-v0-natural-nfc","title":"Prusament PETG V0 Natural (NFC)","description":"\u003ch2\u003eComportement à l'impression\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eLe Prusament PETG V0 est une variante ignifugée du PETG Prusament, formulée pour atteindre la classification UL94 V0. Il s'imprime dans des conditions proches du PETG standard, avec un plateau chauffé et une buse en laiton de 0,4 mm.\u003cbr\u003e\u003cbr\u003eComme tout PETG, il est sensible à l'humidité : un séchage préalable est recommandé en cas de stockage en environnement humide.\u003c\/p\u003e\u003ch2\u003ePropriétés et applications\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eLa classification V0 en fait un matériau adapté aux pièces devant répondre à des exigences de comportement au feu : boîtiers électriques, composants industriels, éléments intégrés à des équipements soumis à des normes de sécurité.\u003cbr\u003e\u003cbr\u003eLes propriétés mécaniques restent proches de celles d'un PETG standard.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMatière\u003c\/th\u003e\n\u003ctd\u003ePETG ignifugé\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClassification feu\u003c\/th\u003e\n\u003ctd\u003eUL94 V0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètre\u003c\/th\u003e\n\u003ctd\u003e1,75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColoris\u003c\/th\u003e\n\u003ctd\u003eNatural\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraçabilité\u003c\/th\u003e\n\u003ctd\u003eTag NFC OpenPrintTag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eToutes les imprimantes 3D FDM Prusa\u003c\/li\u003e\n\u003cli\u003eBuse laiton standard 0,4 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Nature \/ 1 kg \/ 1.75 mm","offer_id":58421600452952,"sku":"IDF__17666_IDS__3514","price":42.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_Prusament-PETG-V0_Natural.png?v=1788867648"},{"product_id":"prusament-asa-nfc","title":"Prusament ASA (NFC)","description":"\u003ch2\u003eComportement à l'impression\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eL'ASA demande une enceinte fermée et un plateau chauffé pour limiter le gauchissement. Il est plus exigeant à imprimer qu'un PLA ou un PETG, mais reste plus stable qu'un ABS classique.\u003cbr\u003e\u003cbr\u003eUne ventilation de la pièce est recommandée pendant l'impression, le matériau dégageant des émanations styréniques.\u003c\/p\u003e\n\u003ch2\u003ePropriétés et applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eL'ASA se distingue par sa résistance aux UV et aux intempéries : il conserve sa couleur et ses propriétés mécaniques en extérieur, là où l'ABS jaunit et se fragilise. Il supporte également des températures de service élevées.\u003cbr\u003e\u003cbr\u003eApplications typiques : pièces d'extérieur, supports de capteurs, boîtiers exposés, composants automobiles.\u003c\/p\u003e\n\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMatière\u003c\/th\u003e\n\u003ctd\u003eASA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètre\u003c\/th\u003e\n\u003ctd\u003e1,75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEnceinte fermée\u003c\/th\u003e\n\u003ctd\u003eRecommandée\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRésistance UV\u003c\/th\u003e\n\u003ctd\u003eÉlevée\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColoris\u003c\/th\u003e\n\u003ctd\u003eLipstick Red, Jet Black, Signal white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTraçabilité\u003c\/th\u003e\n\u003ctd\u003eTag NFC OpenPrintTag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibilité\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eToutes les imprimantes 3D FDM Prusa\u003c\/li\u003e\n\u003cli\u003eEnceinte fermée recommandée\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Jet Black \/ 1 kg \/ 1.75 mm","offer_id":58421600485720,"sku":"3480","price":25.83,"currency_code":"EUR","in_stock":true},{"title":"Lipstick Red \/ 1 kg \/ 1.75 mm","offer_id":58438335922520,"sku":"3485","price":25.83,"currency_code":"EUR","in_stock":true},{"title":"Signal White \/ 1 kg \/ 1.75 mm","offer_id":58443373707608,"sku":"3483","price":25.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_PrusamenASA.jpg?v=1788867692"},{"product_id":"plateau-acier-core-one-l-texture","title":"Plateau acier CORE One L","description":"\u003ch2\u003eMise en œuvre\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003ePlaque en acier à ressort double face pour imprimante Prusa CORE One L. Elle se pose sur le plateau magnétique chauffant, sans outillage, et se retire pour décoller les pièces par flexion une fois refroidie.\u003cbr\u003e\u003cbr\u003eDeux finitions sont proposées. Le revêtement texturé donne aux premières couches un aspect mat granuleux et facilite le décollement. La finition satinée offre un rendu lisse légèrement mat, intermédiaire entre le PEI lisse et le texturé.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType de pièce\u003c\/th\u003e\n\u003ctd\u003ePlaque acier à ressort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinitions disponibles\u003c\/th\u003e\n\u003ctd\u003eTexturé, Satiné\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eCORE One L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixation\u003c\/th\u003e\n\u003ctd\u003eMagnétique\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\u003cli\u003ePrusa CORE One L\u003c\/li\u003e\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Texturé","offer_id":58421600518488,"sku":"IDF__18045_IDS__3589","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Satiné","offer_id":58422042853720,"sku":"IDF__18046_IDS__3587","price":49.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_Plateau-acier-CORE-One-L_Texture.png?v=1788868027"},{"product_id":"plateau-acier-core-one-texture","title":"Plateau acier CORE One","description":"\u003ch2\u003eMise en œuvre\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003ePlaque en acier à ressort double face pour imprimante Prusa CORE One. Elle se pose sur le plateau magnétique chauffant, sans outillage, et se retire pour décoller les pièces par flexion une fois refroidie.\u003cbr\u003e\u003cbr\u003eTrois finitions sont proposées. Le revêtement texturé donne aux premières couches un aspect mat granuleux et facilite le décollement. Le PEI lisse donne un rendu brillant et uniforme, particulièrement adapté au PLA, et demande un nettoyage régulier à l'alcool isopropylique pour conserver son adhérence. La finition satinée se situe entre les deux.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType de pièce\u003c\/th\u003e\n\u003ctd\u003ePlaque acier à ressort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinitions disponibles\u003c\/th\u003e\n\u003ctd\u003eTexturé, PEI lisse, Satiné\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eCORE One\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFixation\u003c\/th\u003e\n\u003ctd\u003eMagnétique\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\u003cli\u003ePrusa CORE One\u003c\/li\u003e\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Texturé","offer_id":58421600584024,"sku":"IDF__11397_IDS__183","price":33.33,"currency_code":"EUR","in_stock":true},{"title":"PEI lisse","offer_id":58422042886488,"sku":"IDF__15296_IDS__3246","price":29.16,"currency_code":"EUR","in_stock":true},{"title":"Satiné","offer_id":58422042919256,"sku":"IDF__5360_IDS__212","price":41.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_Plateau-acier-CORE-One_Texture_8e46233f-3a98-418e-a5f5-66414f6fc828.png?v=1788868608"},{"product_id":"prusa-buddy-3d-camera","title":"Prusa Buddy 3D Camera","description":"\u003ch2\u003eFonctionnement\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eCaméra de supervision conçue par Prusa pour le suivi d'impression à distance. Elle se connecte à l'imprimante et permet de visualiser le déroulement d'un travail depuis Prusa Connect, sans installation logicielle tierce.\u003cbr\u003e\u003cbr\u003eL'installation ne nécessite pas de modification de l'imprimante.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType de pièce\u003c\/th\u003e\n\u003ctd\u003eCaméra de supervision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntégration\u003c\/th\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMarque\u003c\/th\u003e\n\u003ctd\u003ePrusa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eImprimantes Prusa compatibles Prusa Connect\u003c\/li\u003e\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58421600682328,"sku":"IDF__14644_IDS__2658","price":36.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_CameraBuddy.png?v=1788868791"},{"product_id":"prusa-upgrade-core-one-l","title":"Prusa Upgrade CORE One L+","description":"\u003ch2\u003eMise en œuvre\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eKit de mise à niveau destiné aux imprimantes Prusa CORE One L+. Il permet de faire évoluer une machine existante sans remplacement complet.\u003cbr\u003e\u003cbr\u003eSe référer à la documentation Prusa pour la procédure d'installation et les prérequis de version.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType de pièce\u003c\/th\u003e\n\u003ctd\u003eKit de mise à niveau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine concernée\u003c\/th\u003e\n\u003ctd\u003eCORE One L+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMarque\u003c\/th\u003e\n\u003ctd\u003ePrusa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\u003cli\u003ePrusa CORE One L+\u003c\/li\u003e\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58438341984600,"sku":"IDF__27692_IDS__4180","price":19.16,"currency_code":"EUR","in_stock":true}]},{"product_id":"prusa-core-one-upgrade","title":"Prusa CORE One+ Upgrade","description":"\u003ch2\u003eMise en œuvre\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eKit de mise à niveau destiné aux imprimantes Prusa CORE One+. Il permet de faire évoluer une machine existante sans remplacement complet.\u003cbr\u003e\u003cbr\u003eSe référer à la documentation Prusa pour la procédure d'installation et les prérequis de version.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType de pièce\u003c\/th\u003e\n\u003ctd\u003eKit de mise à niveau\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine concernée\u003c\/th\u003e\n\u003ctd\u003eCORE One+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMarque\u003c\/th\u003e\n\u003ctd\u003ePrusa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\u003cli\u003ePrusa CORE One+\u003c\/li\u003e\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58438342017368,"sku":"IDF__19631_IDS__3604","price":8.33,"currency_code":"EUR","in_stock":true}]},{"product_id":"buddy-camera-for-prusa-core-one","title":"Buddy Camera for Prusa CORE One","description":"\u003ch2\u003eFonctionnement\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eCaméra de supervision Prusa dédiée à la CORE One, pour le suivi d'impression à distance. Elle se connecte à l'imprimante et permet de visualiser le déroulement d'un travail depuis Prusa Connect, sans installation logicielle tierce.\u003cbr\u003e\u003cbr\u003eVersion spécifique à la CORE One, à distinguer de la Buddy 3D Camera destinée aux autres modèles.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eType de pièce\u003c\/th\u003e\n\u003ctd\u003eCaméra de supervision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine concernée\u003c\/th\u003e\n\u003ctd\u003eCORE One\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntégration\u003c\/th\u003e\n\u003ctd\u003ePrusa Connect\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMarque\u003c\/th\u003e\n\u003ctd\u003ePrusa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\u003cli\u003ePrusa CORE One\u003c\/li\u003e\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":58438342082904,"sku":"IDF__18514_IDS__2790","price":36.66,"currency_code":"EUR","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_prusa_header_collection.webp?v=1779373568","url":"https:\/\/3dprint.shop\/en\/collections\/prusa.oembed?page=3","provider":"3DPrint.shop","version":"1.0","type":"link"}