{"title":"Prusa","description":"\u003cp\u003eIn this collection, you'll find Prusament filaments manufactured in-house with a guaranteed diameter tolerance of ±0.02 mm and a measurement report viewable by spool number\u003c\/p\u003e","products":[{"product_id":"thermistor-ntc-100k-115-mm","title":"NTC Thermistor 100k - 115 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe NTC 100k Thermistor - 115 mm is the replacement thermal probe dedicated to Prusa Research FDM printers equipped with a Nextruder extruder (MK4, MK3.9, CORE One ranges). It provides real-time measurement of the heater block or heatsink temperature, fundamental data used by the firmware to regulate heating resistance and trigger the machine's thermal safety features.\u003cbr\u003e\u003cbr\u003eAs an NTC (negative temperature coefficient) type with a nominal resistance of 100 kΩ, this sensor conforms to the profile expected by Prusa firmware, ensuring controlled regulation without software recalibration upon reassembly. Depending on the printer model, this thermistor is also used for heatsink monitoring on the XL.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is necessary in case of inconsistent readings, thermal errors during printing, or physical sensor failure (wire breakage, insulation). The operation is performed with the printer off and the hotend cooled, following the procedure documented in the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product is delivered with its M3×4 locking screw ready to install. After reassembly, check reading consistency during cold start and run a PID tune to validate thermal regulation stability.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eThermal probe (NTC thermistor)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNominal Resistance\u003c\/th\u003e\n\n\u003ctd\u003e100 kΩ\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCable Length\u003c\/th\u003e\n\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSensor Type\u003c\/th\u003e\n\n\u003ctd\u003eNTC (negative temperature coefficient)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eContents of delivery\u003c\/th\u003e\n\n\u003ctd\u003e1 NTC 100k 115 mm thermistor + 1 M3×4 locking screw\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\n\u003ctd\u003eInstallation procedure at help.prusa3d.com (by printer model)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part \/ hotend or heatsink maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL (heatsink temperature measurement)\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with earlier generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with MK3.5, MK3.5S, HT90 or INDX models\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893893804376,"sku":"IDF__10601_IDS__1576","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9e4ee773-c070-4777-821c-dc3866a2a049.jpg?v=1779700115"},{"product_id":"heater-40-w-120-mm","title":"Heater 40 W - 120 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe Heater 40W - 120mm is the replacement heater cartridge designed for the Nextruder extruder used in the latest generation of Prusa Research FDM printers (MK4, MK3.9, CORE One ranges). Its function is to transfer electrical power to the hotend block to bring the melt zone to the target temperature set by the firmware, which is critical for consistent extrusion flow.\u003cbr\u003e\u003cbr\u003eRated at 40W at 24V, this cartridge conforms to the thermal profile expected by Prusa firmware, ensuring controlled heating behavior without software modification during reassembly. Its 120mm cable length matches the original wiring path on the Nextruder.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is performed in case of heating failure, thermal error during printing, loss of contact, or localized overheating. The operation is carried out with the printer turned off and the hotend cooled, following the procedure documented in the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product comes with the M3×4 locking screws required for assembly. After reassembly, perform a PID tune to validate the thermal regulation of the cartridge\/block combination and check the consistency of the temperature reading at cold start.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eHeater cartridge (resistive element)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eVoltage\u003c\/th\u003e\n\n\u003ctd\u003e24 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePower\u003c\/th\u003e\n\n\u003ctd\u003e40 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCable length\u003c\/th\u003e\n\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\n\u003ctd\u003e1x 40W \/ 120mm heater cartridge + 2x M3×4 locking screws\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\n\u003ctd\u003eInstallation procedure on help.prusa3d.com (per printer model)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ hotend maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with previous generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with MK3.5 \/ MK3.5S, HT90 models or enclosures (MKx Enclosure, XL Enclosure, MINI Enclosure)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894000984,"sku":"IDF__10923_IDS__1568","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/c73f9ccb-2960-40a6-b0d8-3d7130a7774c.jpg?v=1779700727"},{"product_id":"plaque-en-acier-poudree-texturee","title":"Textured powder-coated steel sheet","description":"\u003cp style=\"text-align: justify;\"\u003eThe Textured Powder-Coated Steel Sheet is the removable spring steel print surface developed by Prusa Research for its Original Prusa FDM printers of the MK and CORE One series. Made of spring steel coated with double-sided powder coating, it attaches magnetically to the MK52 heatbed and can be removed with a simple flex at the end of printing to facilitate part removal.\u003cbr\u003e\u003cbr\u003eThe powder coating applied directly to the metal provides a robust and damage-resistant finish: in the event of a hot nozzle crashing, the metal mass dissipates heat without major deterioration of the surface. The texture resulting from the powder coating transfers to the first layer of prints and hides most mechanical marks, making it a proven surface for series production (used by Prusa in its own print farm).\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe surface offers direct adhesion for PLA and PETG without the need for a glue stick, and allows for a more forgiving Live Adjust Z than a smooth sheet. Prints automatically detach after the sheet has fully cooled. The first layer may appear more squashed than on a smooth sheet; PLA parts with a small adhesion surface may require a brim, while PLA parts with a large contact surface may experience warping.\u003c\/p\u003e\n\u003ch2\u003eCare and Precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eNever clean this sheet with acetone: the solvent creates micro-cracks in the PEI texture and degrades the surface over time. Prefer isopropyl alcohol (IPA) on a cold bed for degreasing between prints. Note that PEI coatings are consumables designed to wear out over time: their wear is not covered by warranty, unless due to an original defect or material failure. If the workshop also uses a smooth PEI sheet, a new Live Adjust Z adjustment will be required when changing.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eRemovable spring steel print sheet (flexible)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePowder-coated spring steel, double-sided textured PEI coating\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAttachment\u003c\/th\u003e\n\n\u003ctd\u003eMagnetic on MK52 heatbed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFeatures\u003c\/th\u003e\n\n\u003ctd\u003eScratch-resistant, transfers its texture to prints, forgiving Live Adjust Z\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCleaning\u003c\/th\u003e\n\n\u003ctd\u003eIPA only (never acetone)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003ePrint surface \/ consumable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa Research MK and CORE One series printers equipped with the MK52 bed\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.5 and MK3.5S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3, MK3S, and MK3S+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK2.5 and MK2.5S\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MINI \/ MINI+, XL, CORE One \/ CORE One+ \/ CORE One L, SL1 \/ SL1S, CW1 \/ CW1S, MK2 \/ MK2S, HT90, INDX and enclosures (MKx Enclosure, XL Enclosure, MINI Enclosure)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894033752,"sku":"IDF__11397___IDS__183","price":33.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/a0a36052-c57b-40bf-85d6-8704fda240b0.jpg?v=1779700901"},{"product_id":"plaque-en-acier-poudree-satinee-de-la-xl","title":"Satin powder-coated steel plate for the XL","description":"\u003cp style=\"text-align: justify;\"\u003eThe XL Satin Powder-Coated Steel Sheet is the removable spring steel print surface developed by Prusa Research specifically for its large-format FDM printer, the Original Prusa XL. Made of spring steel with a satin finish (slightly textured matte powder coating), it magnetically attaches to the XL's segmented heated bed and can be easily removed with a simple flex at the end of a print to facilitate part removal.\u003cbr\u003e\u003cbr\u003eThe satin finish falls between the smooth and textured variants in the range: its slight texture provides controlled adhesion for PLA and PETG while supporting a wide range of filaments, including advanced materials (ABS, ASA, FlexFill 98A, polycarbonate, PC Blend). The vast majority of these filaments can be printed without a separation layer, making it a versatile sheet for workshops using multiple materials on the same machine.\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eDirect adhesion is suitable for PLA and PETG without a glue stick. ASA and PC Blend prints require a brim, skirt, or shield to manage thermal shrinkage. For regular polycarbonate prints, applying a thin layer of glue stick is recommended to preserve the PEI surface over time. The sheet should not be attacked with a sharp metal spatula: only use the spring flex to release parts once the sheet has cooled.\u003c\/p\u003e\n\u003ch2\u003eCare and Precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eNever clean this sheet with acetone: the solvent creates micro-cracks in the PEI texture and degrades the surface over time. Prefer isopropyl alcohol (IPA) on a cold print bed for degreasing between prints. Note that PEI coatings are consumables designed to wear out over time: their wear is not covered by the warranty, except in case of original defect or material failure.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eRemovable spring-effect (flexible) print sheet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePowder-coated spring steel, satin PEI coating\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFinish\u003c\/th\u003e\n\n\u003ctd\u003eSatin (slightly textured matte, intermediate position between smooth and textured)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSize\u003c\/th\u003e\n\n\u003ctd\u003eAdapted to the Original Prusa XL print volume\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAttachment\u003c\/th\u003e\n\n\u003ctd\u003eMagnetic on XL segmented heated bed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSupported Materials\u003c\/th\u003e\n\n\u003ctd\u003ePLA, PETG, ABS, ASA, FlexFill 98A, polycarbonate, PC Blend, etc.\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCleaning\u003c\/th\u003e\n\n\u003ctd\u003eIPA only (never acetone, no sharp metal spatula)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003ePrint surface \/ consumable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOriginal Prusa XL large-format FDM printer\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with other Prusa models (MK series, MINI, CORE One, SL1\/SL1S, CW1\/CW1S, HT90, INDX)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894426968,"sku":"IDF__12042_IDS__1529","price":70.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/5773.jpg?v=1779701595"},{"product_id":"prusa-nextruder-silicone-sock-set","title":"Prusa Nextruder Silicone sock - set","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Nextruder Silicone Sock Set is a pack of three silicone socks designed for the Nextruder extrusion system developed by Prusa Research. Each sock covers the heat block and nozzle to provide thermal insulation and protect against melted filament splashes.\u003cbr\u003e\u003cbr\u003eUsing these socks helps stabilize the temperature at the extrusion point, limits the accumulation of material residue on the heat block, and keeps the hotend clean during series production.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation should only be performed when cold, with the hotend removed or the printer switched off and cooled, to avoid any risk of burns: the sock is manually slipped around the heat block after pre-cleaning the nozzle and block. The placement must be adjusted so as not to obstruct the hotend fan or interfere with bed leveling. Prusa Research provides the assembly procedure on its online knowledge base, to be selected according to the printer model.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eHotend Insulation Sock\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion Platform\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eHigh-temperature silicone\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per set\u003c\/th\u003e\n\n\u003ctd\u003e3 socks\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eThermal insulation of the heat block and protection against splashes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eAccessory \/ maintenance consumable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893895311704,"sku":"IDF__12691_IDS__1566","price":5.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PrusaNextruderSiliconesock-set.jpg?v=1779281761"},{"product_id":"spare-parts-bundle-xl-multi-tool","title":"Spare Parts Bundle (XL Multi-Tool)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Spare Parts Bundle XL Multi-Tool is a complete kit of spare parts and workshop consumables for the Original Prusa XL FDM printer in a multi-head configuration (dual head or five heads). It includes the most frequently used components in continuous operation: complete hotends, heatsinks, fans, sensors, and associated screws.\u003cbr\u003e\u003cbr\u003eThe kit is intended for serial production workshops, fab labs, and industrial environments where printer availability is critical: it allows for anticipating preventive maintenance operations and reducing downtime in case of a component replacement in the extrusion head.\u003c\/p\u003e\n\u003ch2\u003eKit Contents\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe set includes two pre-assembled hotends with 0.4 mm brass nozzles (heater block, heating cartridge, thermistor), two heatsinks equipped with the force sensor and filament sensor, as well as four fans (hotend and part cooling). Also supplied are one heated bed tile and its cables, two left and right side filament sensors, their wiring and accessories (collets, 45 mm PTFE tubes), multi-tool accessories (calibration pin, silicone strips for parking plate, cable clip caps), two cable holders, two 1275 mm PTFE tubes, three Nextruder socks, associated screws, Prusa lubricant, twenty cable ties, a cleaning needle, and an IPA swab.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eParts are installed according to Prusa repair manuals available on the online knowledge base, to be selected based on the operation to be performed. The parts are available in the variants provided by the manufacturer; this kit corresponds to the XL multi-head configuration and is not suitable for single-head printers or other platforms in the range.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eSpare Parts and Maintenance Kit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTarget Platform\u003c\/th\u003e\n\n\u003ctd\u003eOriginal Prusa XL multi-head (2 or 5 heads)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eHotends Included\u003c\/th\u003e\n\n\u003ctd\u003e2 complete hotends with 0.4 mm brass nozzle\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eHeatsinks\u003c\/th\u003e\n\n\u003ctd\u003e2 assembled heatsinks (force sensor + filament sensor)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFans\u003c\/th\u003e\n\n\u003ctd\u003e2 hotend fans + 2 part cooling fans\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eHeated Bed\u003c\/th\u003e\n\n\u003ctd\u003e1 tile + 2 tile cables\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSide Filament Sensors\u003c\/th\u003e\n\n\u003ctd\u003e2 assembled units (left and right) + 2 cables\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSensor Accessories\u003c\/th\u003e\n\n\u003ctd\u003e6 collets, 6 45 mm PTFE tubes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMulti-tool Accessories\u003c\/th\u003e\n\n\u003ctd\u003eCalibration pin, 2 silicone strips, 2 clip caps\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePTFE Tubes\u003c\/th\u003e\n\n\u003ctd\u003e2 × 1275 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNextruder Socks\u003c\/th\u003e\n\n\u003ctd\u003e3 units\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eConsumables\u003c\/th\u003e\n\n\u003ctd\u003ePrusa lubricant, 20 cable ties, cleaning needle, IPA swab\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eScrews\u003c\/th\u003e\n\n\u003ctd\u003eVarious screws and nuts included\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa multi-head printers equipped with the Nextruder system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL in dual-head configuration\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL in five-head configuration\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with single-head Prusa XL, nor with MK4 \/ MK4S, MK3.9 \/ MK3.9S, MK3.5 \/ MK3.5S, MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MINI, MINI+, HT90, INDX, CORE One \/ CORE One+ \/ CORE One L, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893895344472,"sku":"IDF__13314_IDS__2005","price":315.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/SparePartsBundle_XLMulti-Tool.jpg?v=1779281358"},{"product_id":"nextruder-heaterblock","title":"Nextruder heater block","description":"\u003cp style=\"text-align: justify;\"\u003eThe Nextruder heaterblock is the aluminum heating block integrated into the Nextruder hotend assembly, the extrusion system developed by Prusa Research for its FDM printers equipped with this platform. It is the part that holds the heater cartridge and thermistor in contact with the nozzle, ensuring the thermal regulation necessary for filament melting.\u003cbr\u003e\u003cbr\u003eThis spare part allows you to replace a worn, damaged, or residue-contaminated block without having to change the entire hotend.\u003c\/p\u003e\n\u003ch2\u003eKit contents and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe kit includes a Nextruder heaterblock and three M3x4 Torx 6 locking screws required for mounting on the hotend. The operation requires partial disassembly of the extruder assembly. Prusa Research provides a detailed repair manual on its online knowledge base, to be selected according to the printer model concerned, to ensure correct reassembly of the part.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eHeaterblock for hotend assembly\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eScrews included\u003c\/th\u003e\n\n\u003ctd\u003e3x M3x4 locking screws (Torx 6 drive)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\n\u003ctd\u003e1 heaterblock\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MINI, MINI+, MK3.5, MK3.5S, HT90, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893895770456,"sku":"IDF__13900_IDS__1572","price":12.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/nextruderheaterblock.jpg?v=1779270522"},{"product_id":"assembled-hotend-for-mk3-series","title":"Assembled hotend (for MK3 series)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Assembled hotend for MK3 series is the complete pre-assembled hotend provided as a spare part by Prusa Research, dedicated to the melting zone of Original Prusa FDM printers of the MK3 series (MK3, MK3S, MK3S+) and MK3.5 (MK3.5, MK3.5S). Delivered ready to install, it includes all the components necessary for melting and depositing the filament: V6 nozzle, heater block, heatbreak, heatsink with its collet, PTFE tube, 24V \/ 40W heater cartridge with pre-wired Molex connector, and thermistor.\u003cbr\u003e\u003cbr\u003eThe pre-assembled unit allows replacing an entire hotend in a single operation, without re-combining individual components. It is a proven solution for maintenance workshops that want to reduce machine downtime during post-incident replacement or preventive maintenance operations on a fleet of MK3 \/ MK3S \/ MK3S+ \/ MK3.5(S).\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement occurs in cases of recurrent clogging, filament leakage, thermal failure (cartridge or thermistor), PTFE degradation, or nozzle wear not recoverable by a simple part change. The operation is performed with the printer off and the hotend cooled, according to the Prusa installation manual dedicated to this kit (prusa.io\/mk3hotend) and according to the procedure published on help.prusa3d.com for the printer model concerned. After reassembly, run a PID tune and an extrusion test to validate thermal regulation and flow consistency.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eComplete pre-assembled hotend unit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eComposition\u003c\/th\u003e\n\n\u003ctd\u003eV6 nozzle + heater block + heatbreak + heatsink + collet + PTFE tube + 24 V\/40 W heater cartridge with Molex connector + thermistor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCartridge voltage\u003c\/th\u003e\n\n\u003ctd\u003e24 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCartridge power\u003c\/th\u003e\n\n\u003ctd\u003e40 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\n\u003ctd\u003eDedicated installation manual (prusa.io\/mk3hotend) + procedure help.prusa3d.com per model\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ complete hotend maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa Research MK3 and MK3.5 series printers\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3S+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.5 and MK3.5S\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK2 \/ MK2S \/ MK2.5 \/ MK2.5S, MK3.9 \/ MK3.9S, MK4 \/ MK4S, XL, MINI \/ MINI+, SL1 \/ SL1S, CW1 \/ CW1S, CORE One \/ CORE One+ \/ CORE One L, HT90 and INDX\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893897572696,"sku":"IDF__16993_IDS__3106","price":66.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/df643631-3b36-4ddf-8033-4673d3cebc1b.jpg?v=1779702402"},{"product_id":"smooth-rod-y-axis-mk4-mk3-s-mk2-5-s-mk2-s","title":"Smooth rod Y-axis (MK4, MK3\/S\/+, MK2.5\/S, MK2\/S)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Smooth Rod is a linear guide rod used on the moving axes of compatible FDM 3D printers. This mechanical component ensures the guiding of mobile carriages via linear bearings and directly contributes to the kinematic stability of movements during printing phases.\u003cbr\u003e\u003cbr\u003eMachined for direct integration into original assemblies, this replacement rod helps restore the precision of axis movement in the event of wear, surface scratches, or mechanical play observed during prolonged use of the machine.\u003c\/p\u003e \u003ch2\u003eLinear Guidance and Movement Precision\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eSmooth rods are involved in maintaining axis alignment and the regularity of printing system movements. Their surface condition directly influences the behavior of linear bearings, mechanical vibrations, and the movement quality of mobile assemblies.\u003cbr\u003e\u003cbr\u003eReplacing a worn rod helps limit defects related to parasitic movements, dimensional variations, or visible irregularities on printed layers. This type of maintenance is commonly performed in high-volume FDM production environments.\u003c\/p\u003e \u003ch2\u003eMaintenance and Mechanical Integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part is designed for direct replacement of original guiding components on compatible printers. It integrates into the mechanical assemblies designed by Prusa Research and can be used as part of preventive or corrective maintenance of linear axes.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eLinear guide smooth rod\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eMechanical guidance of print axes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible Technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMechanical Compatibility\u003c\/th\u003e\n\n\u003ctd\u003ePrusa-compatible linear bearings\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eInstallation\u003c\/th\u003e\n\n\u003ctd\u003eDirect integration into compatible assemblies\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eContent\u003c\/th\u003e\n\n\u003ctd\u003eSmooth guide rod\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Original Prusa FDM 3D printers\u003c\/li\u003e \u003cli\u003eCompatible with Prusa linear axes\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3S+\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893897605464,"sku":"IDF__2521_IDS__324","price":9.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/463.jpg?v=1779291412"},{"product_id":"buddy-control-board","title":"Carte de contrôle Buddy","description":"\u003cp style=\"text-align: justify;\"\u003eThe Buddy Control Board is the main electronic board used on several Original Prusa 3D printers. It manages essential machine functions: stepper motor control, thermal control of heating elements, sensor management, communication with the user interface, and processing of FDM printing operations.\u003cbr\u003e\u003cbr\u003eDeveloped for the Prusa ecosystem, this control board integrates the electronics necessary for the coordinated operation of the printer's mechanical and thermal subsystems. It can be used as a replacement for a defective board or for advanced maintenance.\u003c\/p\u003e \u003ch2\u003eElectronic architecture and machine management\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe Buddy Board centralizes connections for motor axes, fans, thermistors, heating elements, and detection devices present on compatible printers. Its architecture is designed to ensure stable communication between the firmware and the machine's various components.\u003cbr\u003e\u003cbr\u003eIt helps maintain movement precision, thermal control, and extrusion consistency during prolonged printing cycles. Board replacement must be performed according to the technical procedures provided by the manufacturer.\u003c\/p\u003e \u003ch2\u003eMaintenance and integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis electronic board is supplied as an original spare part for compatible platforms equipped with the Buddy architecture. It integrates directly into the assemblies provided by Prusa Research and allows for restoring printer control and management functions without structural modification to the system.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003e3D Printer Motherboard\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrinter system control and management\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible Technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eArchitecture\u003c\/th\u003e\n\n\u003ctd\u003eBuddy System\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and Replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eInstallation\u003c\/th\u003e\n\n\u003ctd\u003eDirect integration on compatible printers\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eContent\u003c\/th\u003e\n\n\u003ctd\u003eElectronic control board\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eOriginal Prusa FDM 3D Printers compatible with Buddy architecture\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MINI\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MINI+\u003c\/li\u003e \u003cli\u003eCompatible with Prusa platforms equipped with a Buddy Control Board\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893897933144,"sku":"IDF__4789_IDS__798","price":36.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/BUDDYCONTROLBOARD.jpg?v=1779291099"},{"product_id":"prusa-hotend-fan-mk4-3-9-xl","title":"Prusa Hotend fan MK4\/3.9\/XL","description":"\u003cp style=\"text-align: justify;\"\u003eThe Hotend Fan MK4\/3.9\/XL is a replacement fan designed for cooling the heatsink of Nextruder systems in compatible Original Prusa printers. This component ensures heat dissipation around the hotend to limit heat creep phenomena and maintain stable filament feeding during prolonged FDM prints.\u003cbr\u003e\u003cbr\u003eDesigned as an original manufacturer part, it integrates directly into existing assemblies without special mechanical adaptation. Its replacement can be carried out as part of preventive or corrective maintenance on the extrusion systems of the machines concerned.\u003c\/p\u003e \u003ch2\u003eThermal Management and Maintenance\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe fan contributes to the permanent cooling of the heatsink block to maintain an effective separation between the melting zone and the cold zone. This thermal control is particularly important when printing materials sensitive to premature softening in the filament path.\u003cbr\u003e\u003cbr\u003eReplacing the fan restores original cooling performance in the event of wear, mechanical noise, or rotation failure. Installation is carried out via the maintenance procedures documented by Prusa Research for each compatible platform.\u003c\/p\u003e \u003ch2\u003eIntegration on Prusa Platforms\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part is compatible with several generations of Nextruder systems used on MK4, MK3.9, XL, and CORE One platforms. It is supplied as a single spare part for replacing the original hotend fan. Several references and component variants exist depending on machine generations and assembly configurations.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eReplacement hotend fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eHotend heatsink cooling\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible Technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eExtruder Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eNextruder system\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eContent\u003c\/th\u003e\n\n\u003ctd\u003eHotend fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eInstallation\u003c\/th\u003e\n\n\u003ctd\u003eDirect replacement of the original part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and repair\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eOriginal Prusa FDM 3D printers equipped with the Nextruder system\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3.9\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3.9S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK4\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK4S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa XL\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa CORE One\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa CORE One L\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893898129752,"sku":"IDF__5517_IDS__1617","price":8.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/a63ed130-b85c-4257-a36c-a0a093459171.jpg?v=1779289596"},{"product_id":"prusa-print-fan-mk3-s-mini","title":"Prusa Print fan (MK3\/S\/+, MINI\/+)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Print fan MK3\/S\/+, MINI\/+ is the replacement part cooling fan for the Original Prusa i3 MK3, MK3S, MK3S+ FDM printers, as well as for the Original Prusa MINI and MINI+. It is a radial (blower) fan whose function is to blow an airflow onto the part being printed, just after the filament is deposited, to quickly solidify the material and improve the quality of bridges, overhangs, and fine details.\u003cbr\u003e\u003cbr\u003eThis reference matches the mechanical and electrical specifications of the fan fitted at the factory, guaranteeing a flow rate, connector, and thermal signature consistent with the calibration profile of Prusa firmwares.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe fan is installed on the extruder shroud provided for this purpose, with connection to the corresponding connector on the electronic board. Replacement requires partial disassembly of the extrusion carriage; Prusa Research provides a detailed repair manual on its online knowledge base, to be selected according to the printer model concerned, to ensure proper reassembly and preserve the SuperPINDA \/ contact sensor's calibration and the fan's PWM regulation.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003ePart cooling fan (print fan \/ blower)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eCooling of freshly extruded filament\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\n\u003ctd\u003e1 fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part \/ maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOriginal Prusa i3 MK3\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa i3 MK3S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa i3 MK3S+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MINI\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MINI+\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK4, MK4S, MK3.9, MK3.9S, MK3.5, MK3.5S, MK2.5S, MK2.5, MK2S, MK2, HT90, INDX, CORE One \/ CORE One+ \/ CORE One L, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899211096,"sku":"IDF__8079_IDS__167","price":6.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PRUSAPRINTFANMK3SMINI.jpg?v=1779286116"},{"product_id":"prusa_hepa_filter","title":"Prusa HEPA filter","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa HEPA filter is a combined HEPA and activated carbon filter cartridge, designed for Prusa enclosures (MK Enclosure, XL Enclosure, MINI Enclosure), Prusa CORE One, CORE One+, and CORE One L printers, as well as the HT90 model. The filter processes both fine particles generated by FDM extrusion and volatile organic compounds released by certain engineering thermoplastics.\u003c\/p\u003e\n\u003ch2\u003eLifespan and Replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe manufacturer estimates a lifespan of at least 600 hours of use under normal printing conditions. Replacement occurs when there is a decrease in filtration efficiency or as part of preventive maintenance, especially when frequently using emissive materials (ABS, ASA, polycarbonate, certain nylons). Installation is carried out according to the manual for the relevant enclosure or printer, available in the Prusa knowledge base. Compatibility must be checked before ordering: the filter is not intended for open Prusa printers (MK, MINI, XL series, MK4\/4S, MK3.5\/3.9 and their variants).\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n  \n  \n  \n  \n  \u003ctable\u003e\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eCombined filter cartridge\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eFiltration stages\u003c\/th\u003e\n\n\u003ctd\u003eHEPA + activated carbon\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eEstimated lifespan\u003c\/th\u003e\n\n\u003ctd\u003e≥ 600 h of use\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\n\u003ctd\u003e1 × HEPA-carbon filter\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eOrigin\u003c\/th\u003e\n\n\u003ctd\u003eGenuine Prusa Research part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa MK Enclosure\u003c\/li\u003e\n\n  \u003cli\u003ePrusa XL Enclosure\u003c\/li\u003e\n\n  \u003cli\u003ePrusa MINI Enclosure\u003c\/li\u003e\n\n  \u003cli\u003ePrusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003ePrusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003ePrusa HT90\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899243864,"sku":"IDF__8764_IDS__1469","price":22.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/5419.jpg?v=1779204127"},{"product_id":"nextruder_v6_nozzle_adapter","title":"Nextruder V6 Nozzle Adapter","description":"\u003cp style=\"text-align: justify;\"\u003eThe Nextruder V6 Nozzle Adapter is an interface part designed by Prusa Research to make the Nextruder extrusion platform compatible with V6 standard nozzles. It allows the Nextruder ecosystem to be opened up to the wide range of existing third-party V6 format nozzles (brass, hardened steel, nickel-plated, ruby-tipped, diamond-tipped, in different diameters), without mechanical modification of the original hotend.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe adapter mounts on the Nextruder hotend in place of the standard Prusa nozzle interface. The V6 nozzle then screws onto the adapter according to the usual V6 format procedure. The V6 nozzle is not included in the delivery and must be ordered separately.\u003cbr\u003e\u003cbr\u003ePrusa Research provides a detailed installation manual on its online knowledge base, which should be consulted before intervention to ensure proper assembly and preserve the thermal regulation of the hotend.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eNozzle adapter\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAccepted nozzle format\u003c\/th\u003e\n\n\u003ctd\u003eV6 (E3D V6 standard)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle included\u003c\/th\u003e\n\n\u003ctd\u003eNo (to be acquired separately)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\n\u003ctd\u003e1 adapter\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eAccessory \/ compatibility extension\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with all V6 format nozzles (brass, hardened steel, plated, ruby tip, etc.)\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, INDX, MMUs (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899440472,"sku":"IDF_10801_IDS_1504","price":18.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF_10801_IDS_1504.jpg?v=1779280069"},{"product_id":"hotend-heatsink-xl-mk4","title":"Hotend HeatSink XL\/MK4","description":"\u003cp style=\"text-align: justify;\"\u003eThe Hotend heatsink is an original Prusa spare part for the Nextruder hotend assembly, equipping Prusa MK4, MK4S, MK3.9, MK3.9S, XL printers, as well as CORE One series printers. The part ensures thermal dissipation from the upper part of the melt chamber and limits heat transfer to the cold zone of the filament tube, which prevents heat creep and clogging during printing.\u003c\/p\u003e\n\u003ch2\u003eContents and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe delivered assembly includes the hotend heatsink and the original Prusa load cell, a force sensor used by the Nextruder for automatic first-layer calibration and nozzle\/bed contact detection. Replacement is typically performed in case of repeated calibration failures, filament jamming due to abnormal heatsink heating, or as preventive maintenance after intensive production use. The part is not compatible with MK3, MK3S, MK3.5\/MK3.5S, MINI generations, nor with HT90 and Prusa enclosures: check the printer model before ordering.\u003cbr\u003e\u003cbr\u003eInstallation should follow the corresponding Prusa repair manual for the model, available at help.prusa3d.com.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eSpare part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eHotend heatsink + force sensor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSystem\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\n\u003ctd\u003e1 × hotend heatsink + 1 × load cell\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eOrigin\u003c\/th\u003e\n\n\u003ctd\u003eOriginal Prusa Research part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003ePrusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003ePrusa XL\u003c\/li\u003e\n\n  \u003cli\u003ePrusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003ePrusa CORE One L\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893899768152,"sku":"IDF_15348_IDS_1574","price":44.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PRUSAHOTENDHEATSINK.png?v=1779206001"},{"product_id":"prusament-petg-900g-refill-nfc-compatible","title":"Prusament PETG 900g Refill (NFC Compatible)","description":"\u003ch1\u003ePrusament PETG\u003c\/h1\u003e\n\u003cp\u003ePrusament PETG is a 3D filament manufactured in-house by Prusa Research, a Czech 3D printer manufacturer and operator of its own extrusion line. The Prusament brand targets the professional and prosumer segment, with control over the entire chain from polymer pellets to spooling. Each spool undergoes individual quality control (diameter, chromatic uniformity, mechanical properties), and its manufacturing parameters can be viewed online via a unique spool ID. The announced diametrical precision is ±0.02 mm, compared to 0.05 mm for the usual market standard.\u003c\/p\u003e\n\u003cp\u003ePETG (polyethylene terephthalate glycolized) is a thermoplastic valued for its robustness and toughness, which are superior to PLA while remaining easier to print than ABS. It offers good inter-layer adhesion, making it suitable for functional parts subjected to moderate mechanical stress: supports, fasteners, brackets, technical casings. The material's low thermal expansion limits warping, even on large parts printed without an enclosed chamber. PETG also exhibits good watertightness for both indoor and outdoor use.\u003c\/p\u003e\n\u003cp\u003eFor printing, FFF\/FDM technology should be set at 250 °C for the nozzle and 70 to 90 °C for the heated bed. A textured or satin steel sheet is recommended. Before each print, check the cleanliness of the bed surface. Since PETG is hygroscopic, store the spool in an airtight container with desiccant after opening; in case of moisture (bubbles during extrusion, surface finish degradation), proceed with drying according to the manufacturer's procedure. Enable retraction to limit stringing, which is the main extrusion defect of this material.\u003c\/p\u003e\n\u003cp\u003eRecommended for the production of functional parts, workshop jigs, watertight prototypes, mechanical supports, parts intended for outdoor use, and large parts sensitive to warping. Not recommended for parts requiring fine detail (prefer PLA), for long bridges without supports (poor bridging characteristics), for food contact applications without additional certification, and for parts subjected to continuously high service temperatures.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePETG (polyethylene terephthalate glycolized)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\n\u003ctd\u003eIn-house production, Czech Republic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFilament diameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter tolerance\u003c\/th\u003e\n\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\n\u003ctd\u003e250 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e70 to 90 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended plate\u003c\/th\u003e\n\n\u003ctd\u003eTextured or satin steel (powder-coated)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTraceability\u003c\/th\u003e\n\n\u003ctd\u003eQR code per spool, parameters viewable online\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003e3D printers using FFF\/FDM technology with 1.75 mm filament\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa printers (MK3S+, MK4, MINI+, XL, CORE One)\u003c\/li\u003e\n\n  \u003cli\u003ePrusa textured and satin steel sheets (powder-coated)\u003c\/li\u003e\n\n  \u003cli\u003eNFC-compatible Refill packaging with existing Prusament spool flanges\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Anthracite Grey","offer_id":57202747343192,"sku":"IDF__17613_IDS__3546","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"Jet Black","offer_id":57202747375960,"sku":"IDF__17599_IDS__3542","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Urban Grey","offer_id":57202747408728,"sku":"IDF__17689_IDS__3544","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Clear","offer_id":57202747441496,"sku":"IDF__17615_IDS__3547","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"Signal White","offer_id":57202747474264,"sku":"IDF__17691_IDS__3543","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Black","offer_id":57272955240792,"sku":"IDF__17692_IDS__3545","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/61e65595-f5f6-467a-951a-882210fc0adb.jpg?v=1778574594"},{"product_id":"prusa-nozzle-obxidian","title":"Prusa ObXidian Nozzle","description":"\u003cp\u003eThe Prusa Nozzle ObXidian is a high-quality nozzle specifically designed for the Nextruder. It is made from hardened steel with a corrosion-resistant coating, ensuring exceptional durability and longevity. These nozzles are particularly suitable for printing with abrasive materials such as carbon fiber, as they retain their hardness even at higher temperatures, providing excellent performance and extending the life of your nozzle.\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"0.4 mm","offer_id":57272786288984,"sku":"IDF__9203_IDS__1797","price":48.25,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":57272786321752,"sku":"IDF__9207_IDS__1798","price":48.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/cd9aa9e8-4f72-44c1-b3c0-636108475b54.avif?v=1778571502"},{"product_id":"prusament-pla-nfc","title":"Prusament PLA (NFC)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA is a filament manufactured in-house by Prusa Research in its factories in the Czech Republic and Delaware. It is available in a wide range of colors, including solid matte to satin shades, multi-pigment blends, and glitter-effect variants. Each spool is checked to meet a dimensional tolerance of ±0.02 mm, with continuous measurement of diameter and ovality along its entire length. Actual manufacturing data (diameter readings, ovality, weight) are recorded and provided by batch, allowing for complete traceability of the spool. Color consistency is guaranteed by a documented spectroscopic recipe and control of each batch before shipment.\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA extrudes at 215 °C on a heated bed between 50 and 60 °C, without the need for an enclosed chamber. Its limited shrinkage allows for printing of large or multi-component parts without significant deformation, as well as the reproduction of fine geometries, bridges, and overhangs thanks to low-temperature melting combined with rapid cooling. For parts subject to mechanical stress or exposed to high temperatures, PETG, ASA, or a PC Blend remains preferable. The material is hard and difficult to sand.\u003c\/p\u003e\n\u003ch2\u003eSpool and NFC Identification\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament has been shipped on a redesigned spool integrating a re-writable NFC tag based on the open OpenPrintTag standard. This tag contains essential material information and can be read by the Prusa mobile application in offline mode, without reliance on a cloud service. The spool is produced with controlled tension winding and undergoes a final inspection before shipment.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePLA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eColors\u003c\/th\u003e\n\n\u003ctd\u003eSeveral colors available (solids, blends, glitter effect)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\n\u003ctd\u003eSmooth PEI, textured, or satin\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\n\u003ctd\u003e0.4 mm Brass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eManufacturing origin\u003c\/th\u003e\n\n\u003ctd\u003eCzech Republic \/ Delaware (USA)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n\n\u003cli\u003ePrint profiles supported for all Prusa FDM 3D printers\u003c\/li\u003e\n\n\u003cli\u003eNFC tag reading via the Prusa mobile application\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm \/ Anthracite Grey","offer_id":57387823563096,"sku":"IDF__18754_IDS__3443","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Pristine White","offer_id":57387823595864,"sku":"IDF__17752_IDS__3428","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Prusa Orange","offer_id":57387823628632,"sku":"IDF__17708_IDS__3416","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Jet Black","offer_id":57387823661400,"sku":"IDF__17704_IDS__3414","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Pineapple Yellow","offer_id":57387823694168,"sku":"IDF__17712_IDS__3417","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Lipstick Red","offer_id":57387823726936,"sku":"IDF__17703_IDS__3404","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Azure Blue","offer_id":57387823759704,"sku":"IDF__17627_IDS__3405","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Red","offer_id":57387823792472,"sku":"IDF__17693_IDS__3433","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Pearl Mouse","offer_id":57387823825240,"sku":"IDF__17705_IDS__3407","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Vanilla White","offer_id":57387823858008,"sku":"IDF__17707_IDS__3408","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Gentleman's Grey","offer_id":57387823890776,"sku":"IDF__17710_IDS__3411","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Army Green","offer_id":57387823923544,"sku":"IDF__17628_IDS__3412","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Gravity Grey","offer_id":57387823956312,"sku":"IDF__17736_IDS__3422","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Simply Green","offer_id":57387823989080,"sku":"IDF__17738_IDS__3423","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Nature","offer_id":57387824021848,"sku":"IDF__17773_IDS__3436","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Prusa Pro Green","offer_id":57387824054616,"sku":"IDF__17779_IDS__3440","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blood Red","offer_id":57387824087384,"sku":"IDF__19486_IDS__3444","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Pistachio Green","offer_id":57387824120152,"sku":"IDF__18753_IDS__3441","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Chalky Blue","offer_id":57387824152920,"sku":"IDF__18751_IDS__3442","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Noctua Beige","offer_id":57387824185688,"sku":"IDF__19589_IDS__3629","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Noctua Brown","offer_id":57387824218456,"sku":"IDF__19591_IDS__3630","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Electric Green","offer_id":57387824251224,"sku":"IDF__19676_IDS__3789","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Emerald Green","offer_id":57387824283992,"sku":"IDF__19673_IDS__3790","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Purple","offer_id":57454177354072,"sku":"IDF__17635_IDS__3413","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Black","offer_id":57454177386840,"sku":"IDF__17702_IDS__3402","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Opal Green","offer_id":57454177419608,"sku":"IDF__17711_IDS__3415","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Silver","offer_id":57454177452376,"sku":"IDF__17631_IDS__3403","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Green","offer_id":57454177485144,"sku":"IDF__17676_IDS__3427","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Marble Grey","offer_id":57454177517912,"sku":"IDF__17740_IDS__3426","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Pristine White","offer_id":57387824316760,"sku":"IDF__17770_IDS__3435","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Prusa Orange","offer_id":57387824349528,"sku":"IDF__17775_IDS__3439","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Jet Black","offer_id":57387824382296,"sku":"IDF__17750_IDS__3438","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Lipstick Red","offer_id":57387824415064,"sku":"IDF__17754_IDS__3430","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Azure Blue","offer_id":57387824447832,"sku":"IDF__17678_IDS__3434","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Army Green","offer_id":57387824480600,"sku":"IDF__17681_IDS__3431","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Gravity Grey","offer_id":57387824513368,"sku":"IDF__17748_IDS__3437","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Galaxy Purple","offer_id":57454177550680,"sku":"IDF__17682_IDS__3432","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Galaxy Black","offer_id":57454177583448,"sku":"IDF__17744_IDS__3429","price":45.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF__18754_IDS__3443.jpg?v=1779971019"},{"product_id":"prusament-petg-transparent-nfc","title":"Prusament PETG Transparent (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG is a professional filament manufactured in-house by Prusa Research in the Czech Republic, available in several opaque and transparent colors. Each spool maintains a controlled dimensional tolerance of ±0.02 mm across the entire production, ensuring consistent extrusion on 1.75 mm FDM printers.\u003cbr\u003e\u003cbr\u003ePETG (polyethylene terephthalate glycolized) combines the mechanical strength and durability of an engineering polyester with processing characteristics similar to PLA: low shrinkage, low thermal deformation, and good layer adhesion. More flexible and less brittle than PLA, it offers a slight flex useful for parts subjected to stress or moderate impacts.\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 250 ±10 °C on a heated bed at 80 ±10 °C, without the need for an enclosed chamber. Its very low shrinkage allows for the printing of large parts without the risk of detachment or warping. High inter-layer adhesion makes it suitable for functional parts subjected to mechanical stress, technical supports, and applications requiring internal or external watertightness.\u003cbr\u003e\u003cbr\u003ePETG tends to string: pre-drying the filament and appropriate retraction settings can limit this phenomenon. The rendering of fine details remains inferior to that of PLA, and long bridges are less well controlled. Conversely, the material sands more easily than PLA during post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eNFC Identification and Traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe spools are equipped with a fully rewritable OpenPrintTag NFC tag, storing material data offline and usable by compatible printers or via the Prusa mobile application. A QR code on the spool provides access to the production parameters of each batch (measured tolerance, lot number, manufacturing date) on prusament.com, for complete traceability in series production.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePETG (polyethylene terephthalate glycolized)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\n\u003ctd\u003e250 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e80 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\n\u003ctd\u003eTextured or satin steel sheet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAvailable colors\u003c\/th\u003e\n\n\u003ctd\u003eSeveral shades, opaque and transparent\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\n\u003ctd\u003eIn-house production by Prusa Research (Czech Republic)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n\n  \u003cli\u003eOptimized for the Prusa Research range: MK3S+, MK4, MK4S, MINI+, XL, CORE One\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with multi-color and multi-material printing systems accepting the redesigned Prusament spool\u003c\/li\u003e\n\n  \u003cli\u003eNFC reading compatible with printers supporting the OpenPrintTag standard and with the Prusa mobile application\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ Clear \/ 1.75 mm","offer_id":57284499603800,"sku":"IDF__17563_IDS__3456","price":39.59,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Neon Green \/ 1.75 mm","offer_id":57284513890648,"sku":"IDF__17634_IDS__3451","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Ultramarine Blue \/ 1.75 mm","offer_id":57284519067992,"sku":"IDF__17637_IDS__3453","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange Transparent \/ 1.75 mm","offer_id":57284529389912,"sku":"IDF__17664_IDS__3468","price":39.59,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Clear \/ 1.75 mm","offer_id":57284499636568,"sku":"IDF__17591_IDS__3474","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Neon Green \/ 1.75 mm","offer_id":57284513923416,"sku":null,"price":32.99,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Ultramarine Blue \/ 1.75 mm","offer_id":57284519100760,"sku":null,"price":32.99,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Orange Transparent \/ 1.75 mm","offer_id":57284529422680,"sku":null,"price":32.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/petg_clear.jpg?v=1778676967"},{"product_id":"prusament-petg-glitter-nfc","title":"Prusament PETG Glitter (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG is a professional filament manufactured in-house by Prusa Research in the Czech Republic, available in several opaque and transparent colors. Each spool maintains a controlled dimensional tolerance of ±0.02 mm across the entire production, ensuring consistent extrusion on 1.75 mm FDM printers.\u003cbr\u003e\u003cbr\u003ePETG (polyethylene terephthalate glycolized) combines the mechanical strength and durability of an engineering polyester with processing similar to PLA: low shrinkage, low thermal deformation, and good inter-layer adhesion. More flexible and less brittle than PLA, it offers slight flex, useful for parts subjected to stress or moderate impact.\u003c\/p\u003e\n\u003ch2\u003ePrinting behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 250 ±10 °C on a heated bed at 80 ±10 °C, without the need for an enclosed chamber. Its very low shrinkage allows for printing large parts without the risk of warping or detachment. The high inter-layer adhesion makes it suitable for functional parts subjected to mechanical stress, technical supports, and applications requiring internal or external sealing.\u003cbr\u003e\u003cbr\u003ePETG tends to string: prior drying of the filament and appropriate retraction settings can limit this phenomenon. Fine detail rendering remains inferior to that of PLA, and long bridges are less controlled. Conversely, the material sands more easily than PLA during post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe spools are equipped with a fully rewritable OpenPrintTag NFC tag, storing material data offline and usable by compatible printers or via the Prusa mobile application. A QR code on the spool provides access to the production parameters of each batch (measured tolerance, lot number, manufacturing date) on prusament.com, for complete traceability in series production.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePETG (polyethylene terephthalate glycolized)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\n\u003ctd\u003e250 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e80 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\n\u003ctd\u003eTextured or satin steel sheet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eAvailable colors\u003c\/th\u003e\n\n\u003ctd\u003eSeveral shades, opaque and transparent\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\n\u003ctd\u003eIn-house production by Prusa Research (Czech Republic)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n\u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n\n\u003cli\u003eOptimized for the Prusa Research range: MK3S+, MK4, MK4S, MINI+, XL, CORE One\u003c\/li\u003e\n\n\u003cli\u003eCompatible with multi-color and multi-material printing systems accepting the redesigned Prusament spool\u003c\/li\u003e\n\n\u003cli\u003eNFC reading compatible with printers supporting the OpenPrintTag standard and with the Prusa mobile application\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57298144133464,"sku":"IDF__17638_IDS__3455","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Shimmering Violet \/ 1.75 mm","offer_id":57298144166232,"sku":"IDF__17700_IDS__3477","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Carmine Red \/ 1.75 mm","offer_id":57298144199000,"sku":"IDF__17559_IDS__3452","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Yellow Gold \/ 1.75 mm","offer_id":57298144231768,"sku":"IDF__17636_IDS__3454","price":32.99,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57298144264536,"sku":"IDF__25082_IDS__3945","price":0.0,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Shimmering Violet \/ 1.75 mm","offer_id":57298144297304,"sku":"IDF__17638_IDS__3460","price":0.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Carmine Red \/ 1.75 mm","offer_id":57298144330072,"sku":"IDF__17638_IDS__3461","price":0.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Yellow Gold \/ 1.75 mm","offer_id":57298144362840,"sku":"IDF__17638_IDS__3462","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_petg_galaxy_black.jpg?v=1778680168"},{"product_id":"prusament-petg-carbon-fiber-black-nfc","title":"Prusament PETG Carbon Fiber Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG Carbon Fiber Black is a carbon fiber-reinforced PETG filament, manufactured in-house by Prusa Research in the Czech Republic. The carbon filler improves dimensional stability, temperature resistance, and elastic modulus compared to standard PETG, while greatly reducing stringing.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.02 mm on the diameter, checked at the exit of the extrusion line. The incorporated carbon fibers come from the recycling of industrial waste and end-of-life carbon composites.\u003c\/p\u003e\n\u003ch2\u003ePrinting behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG-CF extrudes at 265 °C on a heated bed at 90 °C, with a textured or satin sheet recommended for adhesion. As the material is abrasive, the use of a hardened nozzle is required to avoid premature wear of the extrusion tip.\u003cbr\u003e\u003cbr\u003ePrinting is almost odorless and inter-layer adhesion remains strong. The surface finish is matte black. Detail fineness is less than that of PLA, and raw mechanical strength is slightly lower than that of unreinforced PETG, usual trade-offs of a carbon-filled composite.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and packaging\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament spools include a rewritable NFC tag compliant with the OpenPrintTag standard, designed to work offline with different printer ecosystems. Material data is stored directly on the tag and readable via the Prusa mobile app. The redesigned, more compact spool features a locking mechanism that facilitates its use in multi-material systems as well as filament drying.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eCarbon fiber reinforced PETG\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\n\u003ctd\u003e265 °C (±10 °C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e90 °C (±10 °C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended print sheet\u003c\/th\u003e\n\n\u003ctd\u003eTextured or satin\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle\u003c\/th\u003e\n\n\u003ctd\u003eHardened required (abrasive material)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eColor\u003c\/th\u003e\n\n\u003ctd\u003eMatte black\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFiber origin\u003c\/th\u003e\n\n\u003ctd\u003eRecycling of industrial waste and end-of-life carbon composites\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eRewritable NFC tag (OpenPrintTag standard)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacture\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research, Czech Republic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened nozzle\u003c\/li\u003e\n\n  \u003cli\u003eOptimized for Prusa Research printers\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with multi-material and multi-color printing systems\u003c\/li\u003e\n\n  \u003cli\u003eNFC tag compatible with the OpenPrintTag standard (multi-brand reading)\u003c\/li\u003e\n\n  \u003cli\u003eTag reading via the Prusa mobile app\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm","offer_id":57284898488664,"sku":"IDF__17601_IDS__3504","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusapetgcarbon.jpg?v=1778684059"},{"product_id":"prusament-petg-nfc","title":"Prusament PETG (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG is a professional filament manufactured in-house by Prusa Research in the Czech Republic, available in several opaque and transparent colors. Each spool complies with a controlled dimensional tolerance of ±0.02 mm across the entire production, ensuring consistent extrusion on 1.75 mm FDM printers.\u003cbr\u003e\u003cbr\u003ePETG (polyethylene terephthalate glycolized) combines the mechanical strength and durability of an engineering polyester with processing characteristics similar to PLA: low shrinkage, low heat distortion, and good interlayer adhesion. More flexible and less brittle than PLA, it offers slight flex, useful for parts subjected to stress or moderate impacts.\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 250 ±10 °C on a heated bed at 80 ±10 °C, without the need for an enclosed chamber. Its very low shrinkage allows for the printing of large parts without the risk of warping or detachment. The high interlayer adhesion makes it suitable for functional parts subjected to mechanical stress, technical supports, and applications requiring internal or external sealing.\u003cbr\u003e\u003cbr\u003ePETG tends to string: pre-drying the filament and appropriate retraction settings can limit this phenomenon. The rendering of fine details remains inferior to PLA, and long bridges are less controlled. Conversely, the material sands more easily than PLA during post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eNFC Identification and Traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe spools are equipped with a fully rewritable OpenPrintTag NFC tag, storing offline material data and usable by compatible printers or via the Prusa mobile app. A QR code on the spool provides access to the production parameters of each batch (measured tolerance, lot number, manufacturing date) on prusament.com, for complete traceability in serial production.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePETG (polyethylene terephthalate glycolized)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\n\u003ctd\u003e250 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e80 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\n\u003ctd\u003eTextured or satin steel sheet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAvailable colors\u003c\/th\u003e\n\n\u003ctd\u003eSeveral shades, opaque and transparent\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacture\u003c\/th\u003e\n\n\u003ctd\u003eIn-house production by Prusa Research (Czech Republic)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n\n  \u003cli\u003eOptimized for the Prusa Research range: MK3S+, MK4, MK4S, MINI+, XL, CORE One\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with multi-color and multi-material printing systems that accept the redesigned Prusament spool\u003c\/li\u003e\n\n  \u003cli\u003eNFC reading compatible with printers supporting the OpenPrintTag standard and with the Prusa mobile app\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530342232,"sku":"IDF__17633_IDS__3450","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549478744,"sku":"IDF__17632_IDS__3448","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616358232,"sku":"IDF__17558_IDS__3449","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Anthracite Grey \/ 1.75 mm","offer_id":57299100565848,"sku":"IDF__17571_IDS__3464","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Signal White \/ 1.75 mm","offer_id":57296716497240,"sku":"IDF__17640_IDS_3458","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Pistachio Green \/ 1.75 mm","offer_id":57296725410136,"sku":"IDF__17641_IDS__3460","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Chalky Blue \/ 1.75 mm","offer_id":57296747790680,"sku":"IDF__17568_IDS__3462","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Terracotta Light \/ 1.75 mm","offer_id":57296750215512,"sku":"IDF__17642_IDS__3461","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Ocean Blue \/ 1.75 mm","offer_id":57296764338520,"sku":"IDF__17643_IDS__3465","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Jungle Green \/ 1.75 mm","offer_id":57296791601496,"sku":"IDF__17579_IDS__3466","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Lipstick Red \/ 1.75 mm","offer_id":57296793600344,"sku":"IDF__17581_IDS__3467","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Matte Black \/ 1.75 mm","offer_id":57296819814744,"sku":"IDF__17598_IDS__3469","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Prusa Pro Green \/ 1.75 mm","offer_id":57296837935448,"sku":"IDF__17697_IDS__3476","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Sky Blue \/ 1.75 mm","offer_id":57296879452504,"sku":"IDF__19481_IDS__3586","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Electric Green \/ 1.75 mm","offer_id":57296905699672,"sku":"IDF__24041_IDS__3791","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Emerald Green \/ 1.75 mm","offer_id":57296906355032,"sku":"IDF__24043_IDS__3792","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Mango Yellow \/ 1.75 mm","offer_id":57297417601368,"sku":"IDF__17570_IDS__3463","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530375000,"sku":"IDF__17687_IDS__3472","price":73.32,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549511512,"sku":"IDF__17677_IDS_3470","price":73.32,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616391000,"sku":"IDF__17600_IDS__3471","price":73.32,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Anthracite Grey \/ 1.75 mm","offer_id":57299100598616,"sku":"IDF__17611_IDS__3475","price":73.32,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Signal White \/ 1.75 mm","offer_id":57296716530008,"sku":"IDF__17685_IDS_3473","price":73.32,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Pistachio Green \/ 1.75 mm","offer_id":57296725442904,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Chalky Blue \/ 1.75 mm","offer_id":57296747823448,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Terracotta Light \/ 1.75 mm","offer_id":57296750248280,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Ocean Blue \/ 1.75 mm","offer_id":57296764371288,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Jungle Green \/ 1.75 mm","offer_id":57296791634264,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Lipstick Red \/ 1.75 mm","offer_id":57296793633112,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Matte Black \/ 1.75 mm","offer_id":57296819847512,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Prusa Pro Green \/ 1.75 mm","offer_id":57296837968216,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Sky Blue \/ 1.75 mm","offer_id":57296879485272,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Electric Green \/ 1.75 mm","offer_id":57296905732440,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Emerald Green \/ 1.75 mm","offer_id":57296906387800,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg \/ Mango Yellow \/ 1.75 mm","offer_id":57297417634136,"sku":null,"price":55.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_petg_urban_grey_1kg.jpg?v=1778828573"},{"product_id":"prusament-pla-refill-nfc-compatible","title":"Prusament PLA Refill (NFC Compatible)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusament PLA Refill 900g is a premium filament manufactured in-house by Prusa Research, packaged as a refill without flanges or a spool core. The format is designed to be installed on an existing, emptied Prusament spool and aligns with the manufacturer's eco-design approach by reducing the amount of packaging material per kilogram of filament delivered.\u003cbr\u003e\u003cbr\u003eThe manufacturing process is entirely controlled in-house, with a precisely controlled dimensional tolerance of ±0.02 mm for solid colors (±0.03 mm for blends), ensuring consistent extrusion in production. Each refill is NFC-compatible for automatic recognition by equipped printers, and the NFC refill version is not backward compatible with the previous generation's 1 kg cardboard core refills.\u003c\/p\u003e\n\u003ch2\u003ePrinting behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA prints at 215 °C at the nozzle, on a heated bed between 50 and 60 °C. Its low thermal expansion allows for printing large parts without significant warping, and its low melting temperature also makes it suitable for small, detailed parts. The material does not require an enclosed chamber and works with smooth, textured, or satin PEI steel sheets.\u003c\/p\u003e\n\u003ch2\u003eApplications and Limitations\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA remains the easiest material to print, suitable for rapid prototyping, conceptual models, detailed figurines, and display parts. It exhibits low heat resistance and brittle fracture behavior, which limits its use for functional parts exposed to high temperatures or subjected to significant mechanical stress. For these applications, a PETG, ABS, or engineering material should be preferred. Each spool is traceable via a QR code that provides access to online production parameters on prusament.com. The range is available in several colors.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePLA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDimensional Tolerance\u003c\/th\u003e\n\n\u003ctd\u003e±0.02 mm (±0.03 mm for blends)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e900 g refill, without flanges or core, NFC compatible\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion Temperature\u003c\/th\u003e\n\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed Temperature\u003c\/th\u003e\n\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePlate Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSmooth, textured, or satin PEI\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTraceability\u003c\/th\u003e\n\n\u003ctd\u003eQR code per spool, parameters viewable on prusament.com\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eColors\u003c\/th\u003e\n\n\u003ctd\u003eSeveral colors available\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n\n  \u003cli\u003eOptimized for the Original Prusa range (MK3S, MK4, MK4S, XL, CORE One)\u003c\/li\u003e\n\n  \u003cli\u003ePrinters equipped with an NFC reader for automatic filament recognition\u003c\/li\u003e\n\n  \u003cli\u003eInstallation on an existing, emptied Prusament NFC spool\u003c\/li\u003e\n\n  \u003cli\u003eNot backward compatible with the previous generation's 1 kg cardboard core refills\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.9 kg \/ Azure Blue \/ 1.75 mm","offer_id":57321415639384,"sku":"IDF__17695_DS___3554","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57321415672152,"sku":"IDF__17743_IDS__3549","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Silver \/ 1.75 mm","offer_id":57321415704920,"sku":"IDF__17690_IDS__3550","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Jet Black \/ 1.75 mm","offer_id":57321415737688,"sku":"IDF__17766_IDS__3551","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Vanilla White \/ 1.75 mm","offer_id":57321415770456,"sku":"IDF__17767_IDS__3552","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Pristine White \/ 1.75 mm","offer_id":57321415803224,"sku":"IDF__17772_DS___3553","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_pla_azure_blue_refill_900.jpg?v=1779174487"},{"product_id":"prusament-pc-nfc","title":"Prusament PC (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend is a premium polycarbonate filament manufactured in-house by Prusa Research, available in various colors. Its formulation is positioned as an engineering material for functional parts subjected to high thermal and mechanical stresses, with a temperature resistance of up to 113 °C and good resistance to cold creep.\u003cbr\u003e\u003cbr\u003eEach spool maintains a controlled dimensional tolerance of ±0.03 mm. A QR code provides access to detailed spool parameters (diameter, ovality, color, mechanical properties) on prusament.com, ensuring full traceability in both workshop and serial production.\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePC Blend prints at 275 ±10 °C on a heated bed at 110 ±10 °C, with a satin steel sheet recommended by the manufacturer. A closed enclosure or a high skirt around the object is advisable to limit shrinkage and warping, which are particularly noticeable on large parts despite improved dimensional stability compared to most polycarbonates on the market. The material exhibits low moisture absorption, good electrical insulation properties, and contains no styrene (a non-toxic alternative to ASA). It is intended for advanced users; PLA or PETG is preferable for beginners in FDM printing.\u003c\/p\u003e\n\u003ch2\u003ePackaging and Traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eRecent spools are equipped with a re-writable OpenPrintTag NFC tag that works offline: the printer automatically recognizes the spool and accesses essential material data without reliance on a cloud service or a proprietary ecosystem. The redesigned spool integrates a locking mechanism that facilitates disassembly for refill use and remains stable during filament drying at recommended temperatures. A filament length of approximately 330 m is obtained for a 900 g spool.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePC Blend (polycarbonate)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAppearance\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several colors\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm (±0.03 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion Temperature (nozzle)\u003c\/th\u003e\n\n\u003ctd\u003e275 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed Temperature\u003c\/th\u003e\n\n\u003ctd\u003e110 ±10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended Print Surface\u003c\/th\u003e\n\n\u003ctd\u003eSatin steel sheet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Temperature Resistance\u003c\/th\u003e\n\n\u003ctd\u003eUp to 113 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMoisture Absorption\u003c\/th\u003e\n\n\u003ctd\u003eVery low\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eElectrical Properties\u003c\/th\u003e\n\n\u003ctd\u003eGood insulation properties\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eComposition\u003c\/th\u003e\n\n\u003ctd\u003eStyrene-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUser Level\u003c\/th\u003e\n\n\u003ctd\u003eAdvanced\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e900 g spool (≈ 330 m of filament)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTraceability\u003c\/th\u003e\n\n\u003ctd\u003eQR code with access to spool parameters on prusament.com\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAll 1.75 mm FDM printers accepting nozzle temperatures around 275 °C and bed temperatures around 110 °C\u003c\/li\u003e\n\n  \u003cli\u003eClosed enclosure recommended for large parts\u003c\/li\u003e\n\n  \u003cli\u003ePrusa MK4, MK4S, MK3.9, MK3.9S, XL and CORE One printers\u003c\/li\u003e\n\n  \u003cli\u003eAutomatic spool reading on any OpenPrintTag compatible system\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"2 lbs \/ Jet Black \/ 1.75 mm","offer_id":57332195361112,"sku":"IDF__17566_IDS__3495","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Urban Grey \/ 1.75 mm","offer_id":57332195393880,"sku":"IDF__17565_IDS__3496","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Nature \/ 1.75 mm","offer_id":57332195426648,"sku":"IDF__17564_IDS__3497","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Orange \/ 1.75 mm","offer_id":57332195459416,"sku":"IDF__17567_IDS__3498","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Pro Green \/ 1.75 mm","offer_id":57332195492184,"sku":"IDF__17607_IDS__3499","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57332195524952,"sku":"IDF__25072_IDS__3950","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_PC_JET_BLACK_900G.jpg?v=1779262254"},{"product_id":"prusament-pc-blend-carbon-fiber-black-nfc","title":"Prusament PC Blend Carbon Fiber Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend Carbon Fiber is a technical filament manufactured in-house by Prusa Research, based on polycarbonate reinforced with recycled carbon fibers from the production process. This formulation provides increased rigidity, good dimensional stability, and high-temperature resistance compared to unreinforced PC Blend, while remaining easier to print.\u003cbr\u003e\u003cbr\u003eEach spool adheres to a controlled dimensional tolerance of ±0.04 mm. The production parameters for each batch (measured diameter, ovality, color) can be viewed online via the QR code on the spool. The filament is available in several colors.\u003c\/p\u003e\n\u003ch2\u003ePrinting Behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF prints at 285 °C with a heated bed regulated at 110 °C, without the need for an enclosed chamber due to limited shrinkage, which allows for printing large models. A satin or textured TXT powder-coated steel sheet offers good adhesion; on smooth PEI, apply a thin layer of glue stick to protect the surface.\u003cbr\u003e\u003cbr\u003eThe use of a hardened steel nozzle is imperative: carbon fibers are abrasive and quickly deteriorate a brass nozzle. The filament does not require pre-drying before printing.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF is intended for technical parts requiring mechanical resistance, rigidity, and temperature resistance up to 114 °C, extended to 130 °C after annealing. It also offers good UV stability and resistance to common chemicals, with a matte surface finish. It is suitable for functional components, supports, fasteners, workshop tools, and jigs subjected to moderate thermal stress. It should be noted that it remains slightly more brittle than unreinforced PC Blend.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePC Blend carbon fiber filled (PCCF)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDimensional Tolerance\u003c\/th\u003e\n\n\u003ctd\u003e±0.04 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion Temperature\u003c\/th\u003e\n\n\u003ctd\u003e285 °C (range 275–295 °C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed Temperature\u003c\/th\u003e\n\n\u003ctd\u003e110 °C (range 100–120 °C)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended Bed\u003c\/th\u003e\n\n\u003ctd\u003eSatin or textured TXT powder-coated steel sheet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle Required\u003c\/th\u003e\n\n\u003ctd\u003eHardened steel mandatory\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eHeat Resistance\u003c\/th\u003e\n\n\u003ctd\u003eUp to 114 °C (130 °C after annealing)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUV Stability\u003c\/th\u003e\n\n\u003ctd\u003eGood\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eChemical Resistance\u003c\/th\u003e\n\n\u003ctd\u003eCommon chemicals\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDrying Before Printing\u003c\/th\u003e\n\n\u003ctd\u003eNot required\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eEnclosed Chamber\u003c\/th\u003e\n\n\u003ctd\u003eNot necessary\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e2 kg on spool\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIdentification\u003c\/th\u003e\n\n\u003ctd\u003eNFC OpenPrintTag (rewritable)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened steel nozzle\u003c\/li\u003e\n\n  \u003cli\u003eOptimized for Prusa MK3S+, MK4, MK4S, XL, and CORE One\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with multi-material and multi-color systems via NFC OpenPrintTag\u003c\/li\u003e\n\n  \u003cli\u003eDedicated 2 kg spool holder required (not compatible with standard spool holder)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57332761264472,"sku":"IDF__17588_IDS__3489","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm","offer_id":57332761297240,"sku":"IDF__17616_IDS__3946","price":112.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusament_pc_fiber_black_800.jpg?v=1779269592"},{"product_id":"nextruder-hotend-brass","title":"Nextruder Hotend brass","description":"\u003cp style=\"text-align: justify;\"\u003eThe Nextruder Hotend brass 0.40 mm is a fully pre-assembled hotend, dedicated to the Nextruder extrusion system developed by Prusa Research. Delivered ready to install, it includes all the thermal components necessary for melting and depositing filament on FDM printers equipped with the Nextruder.\u003cbr\u003e\u003cbr\u003eThis spare part allows for a complete hotend replacement in a single operation, without having to individually assemble the nozzle, heater block, heating cartridge, and thermistor. Several nozzle diameters are available in the range; this reference corresponds to the 0.40 mm brass version.\u003c\/p\u003e\n\u003ch2\u003eComposition and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe assembly includes a 0.40 mm Prusa brass nozzle, an aluminum Nextruder heater block, a 40 W 120 mm heating cartridge, and a 100k NTC 115 mm thermistor. The brass nozzle is suitable for extruding non-abrasive filaments (PLA, PETG, ABS, ASA, PC). For fiber-filled (carbon, glass) or abrasive materials, a hardened steel nozzle should be used. Installation is carried out in accordance with the Prusa repair manual corresponding to the printer model, available on the manufacturer's online knowledge base.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eComplete pre-assembled hotend\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion platform\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\n\u003ctd\u003e0.40 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle material\u003c\/th\u003e\n\n\u003ctd\u003eBrass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eHeater block\u003c\/th\u003e\n\n\u003ctd\u003eAluminum, Nextruder specific\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eHeating cartridge\u003c\/th\u003e\n\n\u003ctd\u003e40 W, 120 mm length\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eThermistor\u003c\/th\u003e\n\n\u003ctd\u003eNTC 100k, 115 mm length\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended filaments\u003c\/th\u003e\n\n\u003ctd\u003eNon-abrasive (PLA, PETG, ABS, ASA, PC, etc.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MK3.9S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.4 mm","offer_id":57332806877528,"sku":"IDF__14511_IDS__1592","price":45.75,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":57332806910296,"sku":"IDF__14513_IDS__1594","price":45.75,"currency_code":"EUR","in_stock":true},{"title":"0.8 mm","offer_id":57335045357912,"sku":"IDF__14515_IDS__1595","price":45.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/NEXTRUDER_HOTEND_BRASS_04.jpg?v=1779278385"},{"product_id":"prusa-nozzle-brass-cht","title":"Prusa Nozzle brass CHT","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Nozzle brass CHT 0.4 mm is a high-flow brass nozzle designed for the Nextruder extrusion system developed by Prusa Research. It integrates CHT (Core Heating Technology), which splits the melt channel into multiple sub-channels to increase the heat exchange surface with the filament and improve heating uniformity.\u003cbr\u003e\u003cbr\u003eThis results in a higher volumetric flow rate than a conventional brass nozzle of the same diameter, useful for high-speed printing or large parts without compromising extrusion quality.\u003c\/p\u003e\n\u003ch2\u003eDesign and Implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe nozzle features an all-metal design: it combines the nozzle and the heat break into a single piece, eliminating any PTFE tube in the filament path within the Nextruder. This architecture improves extrusion reliability over time and allows for quick nozzle changes without complete disassembly of the hotend. Brass material is suitable for non-abrasive filaments (PLA, PETG, ABS, ASA, PC, etc.); for fiber-filled or abrasive materials, a hardened steel version should be used. Several diameters are available in the range.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eAll-metal high-flow nozzle (integrated nozzle + heat break)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion Platform\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle Diameter\u003c\/th\u003e\n\n\u003ctd\u003e0.4 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eBrass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTechnology\u003c\/th\u003e\n\n\u003ctd\u003eCHT (Core Heating Technology) – multi-channel heating\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFilament Guide\u003c\/th\u003e\n\n\u003ctd\u003eAll-metal, no PTFE\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended Filaments\u003c\/th\u003e\n\n\u003ctd\u003eNon-abrasive (PLA, PETG, ABS, ASA, PC, etc.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per Kit\u003c\/th\u003e\n\n\u003ctd\u003e1 nozzle\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ high-flow printing accessory\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with V6-format nozzles via the Nextruder V6 adapter (sold separately)\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, MMUs (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S, and MKx, XL, and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.4 mm","offer_id":57335236002136,"sku":"IDF__14517_IDS__2329","price":23.25,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":57335251403096,"sku":"IDF__14518_IDS__2330","price":23.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_Nozzle_brass_CHT_04.jpg?v=1779280397"},{"product_id":"prusa-nozzle-brass","title":"Prusa Nozzle brass","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Brass Nozzle is a high-precision brass nozzle designed by Prusa Research for the Nextruder extrusion system. It features an all-metal architecture that integrates the nozzle and heat break into a single piece, eliminating any PTFE tubing in the filament path within the hotend.\u003cbr\u003e\u003cbr\u003eThis unibody design improves extrusion reliability over time and allows for quick nozzle changes without a complete hotend disassembly, making it a suitable reference for serial production or prototyping workshops. Several diameters are available in the range to cover both surface quality and productivity needs.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe brass nozzle is suitable for common non-abrasive filaments (PLA, PETG, ABS, ASA, PC, etc.). For fiber-filled (carbon, glass) or abrasive materials, a hardened steel version should be used. Replacement is carried out according to the Prusa assembly manual corresponding to the printer model, available on the manufacturer's online knowledge base. For users with V6 format nozzles, the dedicated Nextruder V6 adapter allows them to keep their existing stock.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eAll-metal nozzle (integrated nozzle + heat break)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eExtrusion Platform\u003c\/th\u003e\n\n\u003ctd\u003eNextruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eBrass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAvailable Diameters in the Range\u003c\/th\u003e\n\n\u003ctd\u003eSeveral diameters offered\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFilament Guide\u003c\/th\u003e\n\n\u003ctd\u003eAll-metal, PTFE-free\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended Filaments\u003c\/th\u003e\n\n\u003ctd\u003eNon-abrasive (PLA, PETG, ABS, ASA, PC, etc.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per Kit\u003c\/th\u003e\n\n\u003ctd\u003e1 nozzle\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part \/ extrusion consumable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa printers equipped with the Nextruder extrusion system\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One and CORE One+\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with V6 format nozzles via the Nextruder V6 adapter (sold separately)\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with MK3S+, MK3S, MK3, MK2.5S, MK2.5, MK2S, MK2, MK3.5, MK3.5S, MINI, MINI+, HT90, INDX, MMU (1, 2, 2S, 3), SL1 \/ SL1S, CW1 \/ CW1S and MKx, XL and MINI enclosures\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.4 mm","offer_id":57335544283480,"sku":"IDF__10795_IDS__1526","price":18.33,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":57335544316248,"sku":"IDF__10797_IDS__1527","price":18.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PRUSA_NOZZLE_BRASS_04.jpg?v=1779282592"},{"product_id":"buse-v6","title":"V6 nozzle","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa V6 nozzle is a replacement nozzle for E3D V6 extrusion systems used on several compatible FDM 3D printers. Machined to ensure a stable material flow, it allows for the consistent deposition of standard and technical thermoplastics in prototyping, functional manufacturing, or small-batch production operations.\u003cbr\u003e\u003cbr\u003eThis type of nozzle is used to adjust the compromise between detail level, print speed, and extrusion flow rate according to manufacturing constraints. Several variants and dimensions exist to adapt the printing configuration to the materials and geometries produced.\u003c\/p\u003e \u003ch2\u003eExtrusion behavior\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe internal geometry of the nozzle directly influences the stability of the molten polymer flow, the extrusion pressure, and the quality of the deposited layers. V6 type nozzles are designed to work with compatible E3D hotends and ensure homogeneous temperature rise in the melting zone.\u003cbr\u003e\u003cbr\u003eThey are suitable for FDM applications requiring simple maintenance and quick replacement of extrusion consumables. The choice of variant depends on the desired level of detail, print time, and the behavior of the material used.\u003c\/p\u003e \u003ch2\u003eMaintenance and material compatibility\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePeriodic nozzle replacement helps limit dimensional deviations due to internal wear, especially when using filaments loaded with fibers or abrasive particles. A good condition nozzle also contributes to maintaining extrusion consistency and inter-layer adhesion during long-duration prints.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eHotend nozzle\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFormat\u003c\/th\u003e\n\n\u003ctd\u003eE3D V6 compatible\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eExtrusion and deposition of thermoplastic filament\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eInstallation\u003c\/th\u003e\n\n\u003ctd\u003eDirect replacement on compatible hotend\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMaterial compatibility\u003c\/th\u003e\n\n\u003ctd\u003eStandard and technical filaments\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eAvailable variants\u003c\/th\u003e\n\n\u003ctd\u003eSeveral dimensions available depending on printing uses\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers equipped with an E3D V6 hotend\u003c\/li\u003e \u003cli\u003eCompatible with Prusa extrusion systems\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK2\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3S\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MK3S+\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.25 mm","offer_id":57336378753368,"sku":"IDF__5430_IDS__916","price":4.91,"currency_code":"EUR","in_stock":true},{"title":"0.6 mm","offer_id":57336378786136,"sku":"IDF__5433_IDS__945","price":4.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_buse_v6_025.png?v=1779290178"},{"product_id":"prusa-uss-drybox","title":"Prusa USS Drybox","description":"\u003cp style=\"text-align: justify;\"\u003eThe Prusa Pro HT90 Drybox is a storage and feeding station designed to maintain technical filaments in a low-humidity environment during FDM production phases. Developed for moisture-sensitive materials, it limits variations in extrusion behavior linked to water absorption, particularly for technical polymers used in industrial settings.\u003cbr\u003e\u003cbr\u003eThe system allows direct feeding of the printer from the sealed enclosure to preserve filament stability throughout the printing cycle. The design is optimized for prototyping workshops, R\u0026amp;D environments, and productions requiring consistent extrusion control for technical materials.\u003c\/p\u003e\n\n\u003ch2\u003eHumidity Management\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThe Drybox uses a passive humidity control system combined with an airtight compartment for spool storage. This configuration reduces the risk of bubbling, surface defects, and layer embrittlement linked to moisture absorbed by certain hygroscopic thermoplastics.\u003cbr\u003e\u003cbr\u003eIt is particularly suitable for filled filaments, high-temperature polymers, and materials requiring stable storage conditions between two printing cycles. Access to the spools remains compatible with continuous use in a production environment.\u003c\/p\u003e\n\n\u003ch2\u003eImplementation in a Professional Environment\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThe structure is designed for direct integration into a professional FDM additive manufacturing workflow. The filament passes to the printer without intermediate handling to limit exposure to ambient air. The solution can be used both in the prototyping phase and in small-batch manufacturing requiring more stable control of material conditions.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eFDM filament Drybox\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eLow-humidity filament storage and feeding\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eProfessional FDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eHygroscopic filaments and technical materials\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eStructure\u003c\/th\u003e\n\n\u003ctd\u003eSealed enclosure\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n\n  \u003cli\u003eAll FDM 3D printers using external spools\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with moisture-sensitive technical filaments\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with Prusa production environments\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with prototyping workshops and professional additive manufacturing lines\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n","brand":"Prusa","offers":[{"title":"With","offer_id":57367437115736,"sku":"IDF___987654321_IDS___3940","price":34.49,"currency_code":"EUR","in_stock":true},{"title":"Without","offer_id":57367437148504,"sku":"IDF___18027_IDS___3939","price":27.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9de2f27b-b690-4a14-b967-a641a9f0a8cb.jpg?v=1779722043"},{"product_id":"prusament-rpla-nfc","title":"Prusament rPLA (NFC)","description":"\u003ch2\u003ePrinting behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003erPLA prints at a nozzle temperature of 205 ± 10 °C on a heated bed at 50 ± 10 °C, without an enclosed chamber, on a smooth, textured, or satin PEI sheet. It exhibits low warping and is very easy to print, comparable to standard PLA.\u003cbr\u003e\u003cbr\u003eIts mechanical properties are close to classic PLA, with a slightly more brittle and more hygroscopic material. The coloring comes from treated organic waste (e.g., red algae), so the shade is unique to each batch, and the organic additives release a perceptible but non-toxic odor during printing. rPLA is not recommended for parts exposed to high temperatures or high mechanical stress.\u003c\/p\u003e\n\u003ch2\u003eTraceability and Storage\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eEach spool includes a rewritable NFC tag compliant with the OpenPrintTag standard (offline operation, multi-brand) and a QR code providing access to the batch manufacturing parameters on prusament.com. As PLA is slightly hygroscopic, keep the spool dry with desiccant after opening; drying according to the Prusa procedure is recommended in case of moisture absorption.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eRecycled PLA (rPLA), organic natural pigments\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDiameter\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm (±0.03 mm)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003e1 kg on spool, OpenPrintTag NFC tag\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAvailable colors\u003c\/th\u003e\n\n\u003ctd\u003eSeveral natural shades offered in the range\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\n\u003ctd\u003e205 ± 10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e50 ± 10 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRecommended sheets\u003c\/th\u003e\n\n\u003ctd\u003eSmooth, textured or satin PEI\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFeatures\u003c\/th\u003e\n\n\u003ctd\u003eEasy to print, low warping, unique shade per batch, recycled, bio-based\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eLimitations\u003c\/th\u003e\n\n\u003ctd\u003eSlightly brittle, hygroscopic, poor high-temperature resistance, perceptible odor (non-toxic)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTraceability\u003c\/th\u003e\n\n\u003ctd\u003eQR code + batch data on prusament.com\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research – Prusament\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n\n  \u003cli\u003eOptimized for Original Prusa MK4\/MK4S, MK3.9, MK3S+, MINI, XL, CORE One\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with Bambu Lab, Creality, Voron, Anycubic and other FDM printers\u003c\/li\u003e\n\n  \u003cli\u003eNFC tag compatible with OpenPrintTag standard compliant ecosystems\u003c\/li\u003e\n\n  \u003cli\u003eApplications: aesthetic models, visual prototypes, interior decoration, parts with reduced environmental footprint\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"2.2 lbs \/ 1.75 mm \/ Corn Pigment","offer_id":57384993096024,"sku":"IDF__17758_IDS__3531","price":29.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/7d344aba-b88a-4276-915e-f332c4916efd.jpg?v=1779954997"},{"product_id":"prusament-pla-silk-nfc","title":"Prusament PLA Silk (NFC)","description":"\u003ch2\u003ePrinting behavior\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePrusament PLA Blend NFC is a PLA material for FDM printing that requires good surface quality and simple implementation. Its low thermal expansion limits warping on large parts and facilitates printing without an enclosed chamber.\u003cbr\u003e\u003cbr\u003eThis formulation is suitable for visual prototypes, models, figurines, aesthetic validation parts, and presentation models. Like other PLAs, it remains unsuitable for environments subject to high temperatures or significant mechanical stress.\u003c\/p\u003e \u003ch2\u003eMaterial management and production environment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eEach spool includes an OpenPrintTag-compatible NFC chip for identifying and managing material information in compatible production environments. The filament benefits from documented dimensional control by the manufacturer to maintain stable extrusion and regular feeding on professional FDM and multi-material systems.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eTechnology\u003c\/th\u003e\n\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePLA Blend\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\n\u003ctd\u003e50 to 60 °C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eShrinkage\u003c\/th\u003e\n\n\u003ctd\u003eLow\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\n\u003ctd\u003e±0.03 mm for Blend versions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eRecommended support\u003c\/th\u003e\n\n\u003ctd\u003eSmooth, textured, or satin PEI\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003eSpool with OpenPrintTag NFC chip\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eAvailable variants\u003c\/th\u003e\n\n\u003ctd\u003eMultiple colors and diameters depending on the references\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eAll FDM \/ FFF 3D printers compatible with PLA\u003c\/li\u003e \u003cli\u003eMulti-material systems compatible with OpenPrintTag NFC spools\u003c\/li\u003e \u003cli\u003eCompatible with Prusa MK4S, XL, Core One, HT90\u003c\/li\u003e \u003cli\u003eCompatible with Bambu Lab AMS and multi-spool feeding systems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm \/ Blend Royal Blue","offer_id":57385717629272,"sku":"IDF__17630_IDS__3418","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blend Viva La Bronze","offer_id":57385717662040,"sku":"IDF__17645_IDS__3421","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blend My Silverness","offer_id":57385717694808,"sku":"IDF__17669_IDS__3425","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blend Ms. Pink","offer_id":57385717727576,"sku":"IDF__17626_IDS__3406","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blend Oh My Gold","offer_id":57385717760344,"sku":"IDF__17644_IDS__3420","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blend Pearl White","offer_id":57385717793112,"sku":"IDF__17625_IDS__3424","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Blend Lime Green","offer_id":57385717825880,"sku":"IDF__17629_IDS__3419","price":27.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF__17630_IDS__3418.jpg?v=1779960930"},{"product_id":"fire-suppression-system-for-original-prusa-mini-enclosure","title":"Fire Suppression System for Original Prusa MINI Enclosure","description":"\u003ch2\u003eThermal Protection for FDM Enclosures\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis fire suppression system is designed for 3D printer enclosures used with Original Prusa MINI printers. It relies on a pressurized heat-sensitive tube capable of detecting an abnormal temperature increase and automatically releasing the extinguishing agent into the protected volume.\u003cbr\u003e\u003cbr\u003eThis approach adds an extra layer of safety in prototyping, continuous production, or assisted manufacturing environments that require prolonged operation of heating elements.\u003c\/p\u003e \u003ch2\u003eIntegration and Installation in a Professional Environment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe kit includes the necessary components for installation in a compatible enclosure: mounting system, screws, user documentation, and signage elements. Its format is suitable for enclosed FDM printing cabinets and facilitates a clean integration into workshops, R\u0026amp;D laboratories, or technical manufacturing spaces.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eSelf-contained fire suppression system\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003e3D Printer Enclosure Protection\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible Technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMain Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eOriginal Prusa MINI Enclosure\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eActivation\u003c\/th\u003e\n\n\u003ctd\u003ePressurized heat-sensitive tube\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eKit Contents\u003c\/th\u003e\n\n\u003ctd\u003eMounting system, screws, user manual, signage elements\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eEnclosures for FDM 3D printers\u003c\/li\u003e \u003cli\u003eEnclosed printing cabinets for professional use\u003c\/li\u003e \u003cli\u003eCompatible with Original Prusa MINI Enclosure\u003c\/li\u003e \u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":57395976831320,"sku":"IDF__16215_IDS__3682","price":107.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/6056fad4-8825-4aea-b440-cedaabd17bec.jpg?v=1780068063"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_prusa_header_collection.webp?v=1779373568","url":"https:\/\/3dprint.shop\/en\/collections\/prusa.oembed","provider":"3dPrint.Shop","version":"1.0","type":"link"}