{"title":"Spare parts","description":"\u003cp\u003eHere you will find all the technical consumables and wear parts: complete hotends and components (heat breaks, heater blocks, nozzles, thermistors, heater cartridges), extruders and drive gears, fans, GT2 belts, bearings, axes and threaded rods, mainboards and drivers, screens, end-stop and levelling sensors, FEP and nFEP films for resin, tanks, build plates, as well as the periodic maintenance kits recommended by the manufacturers.\u003c\/p\u003e","products":[{"product_id":"filtre-abek-v2-pour-capot-stream-ultra-mk3-sc-sc2-sh65-exo42","title":"ABEK v2 Filter for STREAM ULTRA\/MK3\/SC\/SC2\/SH65\/EXO42 Hood","description":"\u003cp style=\"text-align: justify;\"\u003eThe ABEK v2 filter is a filtration cartridge developed for the closed enclosures of Volumic 3D printers. Manufactured by 3M, a recognised industry reference for respiratory protection, it installs directly into the dedicated slot in the enclosure and captures the volatile compounds emitted during extrusion of technical filaments such as ABS, ASA, nylon, or polycarbonate.\u003cbr\u003e\u003cbr\u003eThis filtration system maintains a working environment in compliance with the requirements of a prototyping workshop, design office, or serial production zone, by limiting the spread of printing fumes within the premises.\u003c\/p\u003e\n\u003ch2\u003eFiltration function\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe ABEK designation corresponds to a standardised combination of four filtration families: A for organic gases and vapours with a boiling point above 65 °C, B for inorganic gases and vapours, E for acid vapours, and K for ammonia and its derivatives.\u003cbr\u003e\u003cbr\u003eThis versatility covers the majority of emissions generated by FDM printing of technical polymers and allows a single cartridge to be used for most workshop consumables, without requiring a change of medium depending on the material being printed.\u003c\/p\u003e\n\u003ch2\u003eInstallation and service life\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filter mounts directly onto the designated housing of the compatible Volumic enclosure, with no special tools required. Its service life is estimated at approximately 1,000 hours of printing under normal operating conditions.\u003cbr\u003e\u003cbr\u003eReplacement should be planned based on production volume, the type of filaments used, and room ventilation levels. Tracking cumulative print hours facilitates cartridge replacement planning in production environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eABEK v2 filtration cartridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003e3M\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eACC1138\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFiltered families\u003c\/th\u003e\n\u003ctd\u003eOrganic gases and vapours (A), inorganic (B), acid (E), ammonia and derivatives (K)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eAir filtration for closed FDM 3D printer enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEstimated service life\u003c\/th\u003e\n\u003ctd\u003eapprox. 1,000 hours of printing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDedicated housing on compatible Volumic enclosure, no tools required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eClosed enclosures for Volumic 3D printers\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream Ultra\u003c\/li\u003e\n  \u003cli\u003eVolumic MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic SC and SC2\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831089410392,"sku":"ACC1138","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_727-Filtre-ABEK-pour-capot-STREAM-ULTRA-v2.jpg?v=1775217390"},{"product_id":"plateau-magnetique-ultem-texture-sh65","title":"Textured ULTEM Magnetic Build Plate SH65","description":"\u003cp style=\"text-align: justify;\"\u003eThe SH65 textured magnetic PEI build plate is a flexible print surface designed for Volumic 3D printers equipped with a magnetic plate system. It consists of a spring steel sheet coated on both sides with a textured PEI (ULTEM) finish.\u003cbr\u003e\u003cbr\u003eThe dual coating makes the plate reversible: the sheet can be flipped over when one side wears out, or to have a second print surface immediately available without full reinstallation.\u003c\/p\u003e\n\u003ch2\u003eAdhesion and part release\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe textured PEI coating provides strong grip for the main FDM filaments while facilitating part release once the plate has cooled.\u003cbr\u003e\u003cbr\u003eManual flexion of the steel sheet is generally sufficient to release the part, without tools or risk of surface damage. The texture imprints its own micro-structure on the first layer, giving a characteristic matt finish on the face in contact with the plate.\u003c\/p\u003e\n\u003ch2\u003eInstallation and maintenance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe plate is positioned directly on the machine's magnetic system, with no screwing or mechanical fixing required. Depending on the printer's initial configuration, the additional thickness of the sheet may require replacing the Z end-stop blades with shorter models.\u003cbr\u003e\u003cbr\u003eMaintenance is limited to regular cleaning with isopropyl alcohol between prints, to preserve the PEI adhesion properties over time.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFlexible magnetic build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSubstrate\u003c\/th\u003e\n\u003ctd\u003eSpring steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003ctd\u003eTextured PEI (ULTEM)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCoated faces\u003c\/th\u003e\n\u003ctd\u003e2 (reversible plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic, no screws\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eSpecific to SH65 print volume\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInstallation note\u003c\/th\u003e\n\u003ctd\u003eMay require shorter Z end-stop blades\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaintenance\u003c\/th\u003e\n\u003ctd\u003eClean with isopropyl alcohol\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eACC6050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic 3D printers with magnetic plate system\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831090098520,"sku":"ACC6050","price":116.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-pei-magnetique-ultem-texture-sh65-3.jpg?v=1779305391"},{"product_id":"capteur-de-chauffe-ultra-sc-mk3-sc2-sh65-exo42","title":"Heater Sensor ULTRA\/SC\/MK3\/SC2\/SH65\/EXO42\/EXO65","description":"\u003cp style=\"text-align: justify;\"\u003eThe heater sensor (reference PID1051) is a genuine Volumic spare part for printhead temperature measurement across a wide range of Stream, SH, and EXO printers. The sensor continuously transmits the hot-zone temperature to the printer's control system, which drives the heater cartridge in a closed loop (PID) to maintain the target temperature during extrusion.\u003c\/p\u003e\n\u003ch2\u003eFunction and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is typically required in the event of a temperature error displayed by the printer, thermal regulation drift, a discrepancy between the target and measured temperature, or a sudden print interruption caused by loss of sensor signal. This is a normal consumable part in production environments; regular inspection is recommended as part of preventive maintenance.\u003cbr\u003e\u003cbr\u003eCompatibility covers the STANDARD and PLUS variants of the affected models, as well as the STREAM30 SC2 Performance. Other Performance variants are not compatible with this reference: refer to the dedicated part for the Performance series for those printers.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePID1051\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eSpare part\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003ePrinthead temperature measurement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCovered variants\u003c\/th\u003e\n\u003ctd\u003eStandard and Plus (+ STREAM30 SC2 Performance)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eGenuine Volumic part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic STREAM30 ULTRA\u003c\/li\u003e\n  \u003cli\u003eVolumic STREAM30 SC and STREAM30 SC2\u003c\/li\u003e\n  \u003cli\u003eVolumic STREAM30 SC2 Performance\u003c\/li\u003e\n  \u003cli\u003eVolumic STREAM30 PRO MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42 and EXO65\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831090655576,"sku":"PID1051","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/capteur-de-chauffe-ultrascmk3sc2sh65exo42exo65-3.jpg?v=1784724461"},{"product_id":"double-entrainement-inox-sc-sc2-mk3-sh65-exo42","title":"Stainless Steel Double Drive SC\/SC2\/MK3\/SH65\/EXO42","description":"\u003cp style=\"text-align: justify;\"\u003eThe stainless steel double drive is an extruder sub-assembly for Volumic Stream series 3D printers. Designed to push filament between two synchronised toothed wheels, it ensures bilateral contact with the consumable and reduces the risk of slipping compared to a single drive.\u003cbr\u003e\u003cbr\u003eThe assembly is machined in stainless steel to withstand mechanical wear and corrosion over time, in both prototyping workshop and serial production environments.\u003c\/p\u003e \u003ch2\u003eComposition and operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe part is supplied complete with its central shaft and two needle-roller cages pre-installed, allowing direct replacement without third-party components.\u003cbr\u003e\u003cbr\u003eFree rotation of the wheels on their needle bearings maintains consistent drive torque and reduces the load on the stepper motor. Symmetrical contact with the filament improves force transmission and reduces the risk of slipping during printing of technical consumables.\u003c\/p\u003e \u003ch2\u003eCompatibility and precautions\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part fits Volumic Stream SC, SC2, MK3, SH65, EXO42, and EXO65 printers, including their IDRE and Performance variants. It is not compatible with the Stream ULTRA range, which uses a specific drive system. Verify the exact machine model before ordering.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eDual drive system\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel (INOX)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMachining\u003c\/th\u003e\n\u003ctd\u003ePrecision-machined part\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eIncluded items\u003c\/th\u003e\n\u003ctd\u003eDrive wheels, central shaft, 2 needle-roller cages\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFilament drive in the extruder\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePID1670\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic 3D printers – Stream range (excluding Stream ULTRA)\u003c\/li\u003e \u003cli\u003eStream30 SC, Stream30 SC2, Stream30 SC2 Performance\u003c\/li\u003e \u003cli\u003eStream30 Pro MK3\u003c\/li\u003e \u003cli\u003eSH65, SH65 IDRE, SH65 Performance\u003c\/li\u003e \u003cli\u003eEXO42, EXO42 IDRE, EXO42 Performance\u003c\/li\u003e \u003cli\u003eEXO65, EXO65 IDRE, EXO65 Performance\u003c\/li\u003e \u003cli\u003eNot compatible with Volumic Stream ULTRA\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831090753880,"sku":"PID1670","price":49.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_entrainement-double-inox-pour-ultra-sc.jpg?v=1775217426"},{"product_id":"plateau-vitroceramique-magnetique-sh65","title":"SH65 Magnetic Glass-Ceramic Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe SH65 magnetic glass-ceramic build plate is a replacement part for Volumic SH65 3D printers and their IDRE and Performance variants. It is made from a glass-ceramic material combining the flatness of a glass surface with the thermal resistance of a technical ceramic.\u003cbr\u003e\u003cbr\u003eIts magnetic fixing allows direct installation and removal from the printer cradle, with no screwing or special tools required, simplifying maintenance in production environments.\u003c\/p\u003e\n\u003ch2\u003ePrint behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe glass-ceramic surface provides controlled flatness across the entire print area, a prerequisite for consistent first-layer quality in FDM.\u003cbr\u003e\u003cbr\u003eThe material withstands repeated heating and cooling cycles and retains its geometry over time, making it a proven solution for repeated print runs in prototyping workshops and production environments.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation is carried out by simply placing the plate on the machine's magnetic cradle. No additional mechanical fixing is required: the integrated magnets provide the hold. This design allows quick swapping in the event of wear and enables off-machine flat cleaning of the plate if needed.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eRigid replacement build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic, no screws or tools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eSpecific to SH65 print volume\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePID4295\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic SH65 series 3D printers\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65 IDRE\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65 Performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831091048792,"sku":"PID4295","price":179.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_plateau-vitroceramique-magnetique-sh65.jpg?v=1775242581"},{"product_id":"conduit-de-ventilation-extrudeur-sh65-exo42-blowerduct","title":"SH65\/EXO42 Extruder Blower Duct","description":"\u003cp style=\"text-align: justify;\"\u003eThe SH65\/EXO42 extruder blower duct, also known as the blowerduct, is a replacement part that channels the cooling fan airflow towards the part being printed. Installed on the Volumic printhead, it directs the air from the blower close to the nozzle to provide controlled cooling of the freshly deposited layer.\u003c\/p\u003e\n\u003ch2\u003eRole in print quality\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe quality of layer cooling at the nozzle exit directly determines the rendering of bridges, overhangs, and fine details in FDM printing.\u003cbr\u003e\u003cbr\u003eA duct whose geometry has been degraded by heat, cracked, or poorly positioned will disperse the airflow and cause visible defects on the finished part. Replacement with the genuine part restores the manufacturer-designed airflow geometry and consistent cooling.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe duct mounts in the dedicated position on the printhead, at the radial fan outlet. The operation requires no major disassembly of the machine and forms part of preventive maintenance logic for printers in intensive workshop or production use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eExtruder blower duct\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eChannels radial fan airflow towards the print zone\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003ePrinthead, at blower outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIntervention type\u003c\/th\u003e\n\u003ctd\u003eReplacement part, preventive or corrective maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePID4467\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic SH65 3D printers\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42 3D printers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831091343704,"sku":"PID4467","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_conduit-de-ventilation-extrudeur-sh65exo42-blowerduct-2-1.jpg?v=1775242578"},{"product_id":"moteur-x-et-y-pour-ultra-sc-mk3-sc2-sh65-exo42","title":"X and Y Motor for ULTRA\/SC\/MK3\/SC2\/SH65\/EXO42","description":"\u003cp style=\"text-align: justify;\"\u003eThe X and Y motor is a replacement stepper motor for driving the horizontal axes of Volumic 3D printers. Identical for both axes, it drives the printhead in the XY plane via the machine's belt transmission system.\u003cbr\u003e\u003cbr\u003eA single reference covers the entire Stream and EXO range in their recent versions, simplifying spare parts stock management in multi-machine fleets.\u003c\/p\u003e\n\u003ch2\u003eIdentification and compatibility precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe part features a distinctive notch on the motor body that allows it to be identified relative to earlier generations. This notch is the indicator to check before any replacement.\u003cbr\u003e\u003cbr\u003eEarly MK1 and MK2 motors without this notch are not compatible with this model. If in doubt about the installed version, or for replacement on a v1 motor without a notch, prior contact with a Volumic advisor is required.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eStepper motor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eX and Y axis drive\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification marker\u003c\/th\u003e\n\u003ctd\u003eNotch on motor body\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePRO1501\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic 3D printers – Stream and EXO ranges (revisions fitted with the identification notch)\u003c\/li\u003e\n  \u003cli\u003eStream30 Ultra\u003c\/li\u003e\n  \u003cli\u003eStream30 Pro MK3\u003c\/li\u003e\n  \u003cli\u003eStream30 SC, Stream30 SC2, Stream30 SC2 Performance\u003c\/li\u003e\n  \u003cli\u003eStream20 and Stream30 Pro MK2 (latest generations only, notch present)\u003c\/li\u003e\n  \u003cli\u003eSH65, SH65 IDRE, SH65 Performance\u003c\/li\u003e\n  \u003cli\u003eEXO42, EXO42 IDRE, EXO42 Performance\u003c\/li\u003e\n  \u003cli\u003eEXO65, EXO65 IDRE, EXO65 Performance\u003c\/li\u003e\n  \u003cli\u003eNot compatible with v1 motors without notch (MK1 and early MK2 series)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831091507544,"sku":"PRO1501","price":37.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_moteur-x-et-y-pour-ultrascmk3sc2sh65exo42.jpg?v=1775231797"},{"product_id":"filtre-particule-pour-capot-stream-ultra-v2","title":"Particulate Filter v2 for STREAM ULTRA\/MK3\/SC\/SC2\/SH65\/EXO42 Hood","description":"\u003cp style=\"text-align: justify;\"\u003eThe v2 particulate filter is a mechanical filtration cartridge for the enclosures of Volumic FDM 3D printers. Manufactured by 3M, a recognised industry reference for respiratory protection, it captures solid particles, fine dust, and aerosols emitted inside the closed enclosure during FDM printing.\u003cbr\u003e\u003cbr\u003eIt mounts in the dedicated housing on the enclosure and complements the action of the ABEK chemical filter by providing upstream mechanical capture, thereby extending the service life of the chemical cartridge in intensive workshop use.\u003c\/p\u003e\n\u003ch2\u003eRole and complementarity with the ABEK filter\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eParticulate filtration is a separate stage from gas filtration: it treats suspended solid compounds (extrusion residues, polymer microparticles, workshop dust), while the ABEK cartridge captures gases and vapours.\u003cbr\u003e\u003cbr\u003eBoth filters work in series within the same enclosure. Regular replacement of the particulate filter reduces the load on the chemical filter and maintains the overall filtration quality of the system.\u003c\/p\u003e\n\u003ch2\u003eService life and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filter service life is between 300 and 400 hours of printing, depending on the type of materials used, production volume, and room ventilation. Tracking cumulative print hours facilitates cartridge replacement planning in serial production or intensive prototyping environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003ev2 particulate filter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMechanical filtration of particles, dust, and aerosols\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePosition in system\u003c\/th\u003e\n\u003ctd\u003eComplementary stage to the ABEK chemical cartridge\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEstimated service life\u003c\/th\u003e\n\u003ctd\u003e300 to 400 hours of printing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eClosed enclosure for Volumic FDM 3D printer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003e3M\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eACC1815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eClosed enclosures for Volumic 3D printers\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream Ultra\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream30 SC and SC2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream30 Pro MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893862674776,"sku":"ACC1815","price":12.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_732-Filtre-particule-pour-capot-STREAM-ULTRA-v2.jpg?v=1775210205"},{"product_id":"devidoir-central-complet","title":"Complete Central Spool Holder (small)","description":"\u003cp style=\"text-align: justify;\"\u003eThe complete central spool holder (small model) is a filament spool support for Volumic 3D printers. Designed for spools weighing less than 1.5 kg, it installs in the central position on the machine and provides direct filament routing to the printhead.\u003cbr\u003e\u003cbr\u003eThe assembly is supplied ready to mount, with all the mechanical components needed for immediate use in a prototyping or production workshop.\u003c\/p\u003e\n\u003ch2\u003eAssembly composition\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe kit includes the central shaft, locking nut, drive rotors, filament guide tubes, and lateral stop.\u003cbr\u003e\u003cbr\u003eThe rotors allow free rotation of the spool under the pulling force of the extruder, without excessive mechanical stress on the filament. The stop maintains the axial positioning of the spool and prevents any lateral play during printing.\u003c\/p\u003e\n\u003ch2\u003eInstallation and use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eMounting is carried out in the machine's dedicated central position. The filament path runs through the included guide tubes, which protect the consumable from friction and reduce the risk of snagging during printing. The compact format is suited to small-volume spools used for material testing, settings validation, or short-run production.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eCentral filament spool holder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eSmall model\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible spools\u003c\/th\u003e\n\u003ctd\u003eWeight less than 1.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMounting position\u003c\/th\u003e\n\u003ctd\u003eCentral on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIncluded items\u003c\/th\u003e\n\u003ctd\u003eShaft, nut, rotors, filament guide tubes, stop\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eACC4474\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic 3D printers with central spool holder position\u003c\/li\u003e\n  \u003cli\u003eFilament spools weighing less than 1.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863035224,"sku":"ACC4474","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/devidoir-central-complet-petit-3.jpg?v=1779311440"},{"product_id":"plateau-pei-magnetique-ultem-texture-exo42","title":"EXO42 Textured Magnetic PEI (ULTEM) Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe EXO42 textured magnetic PEI build plate is a flexible print surface for the Volumic EXO42 3D printer and other Volumic models with a magnetic plate system. It consists of a spring steel sheet coated on both sides with a textured PEI (ULTEM) finish.\u003cbr\u003e\u003cbr\u003eThe dual coating makes the plate reversible: the sheet can be flipped over when one side wears out, or to have a second print surface immediately available without full reinstallation.\u003c\/p\u003e\n\u003ch2\u003eAdhesion and part release\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe textured PEI coating provides strong grip for the main FDM filaments while facilitating part release once the plate has cooled.\u003cbr\u003e\u003cbr\u003eManual flexion of the steel sheet is generally sufficient to release the part, without tools or risk of surface damage. The texture imprints its own micro-structure on the first layer, giving a characteristic matt finish on the face in contact with the plate.\u003c\/p\u003e\n\u003ch2\u003eInstallation and maintenance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe plate is positioned directly on the machine's magnetic system, with no screwing or mechanical fixing required. Depending on the printer's initial configuration, the additional thickness of the sheet may require replacing the Z end-stop blades with shorter models.\u003cbr\u003e\u003cbr\u003eMaintenance is limited to regular cleaning with isopropyl alcohol between prints, to preserve the PEI adhesion properties over time.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eFlexible magnetic build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSubstrate\u003c\/th\u003e\n\u003ctd\u003eSpring steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003ctd\u003eTextured PEI (ULTEM)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCoated faces\u003c\/th\u003e\n\u003ctd\u003e2 (reversible plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e442 × 442 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic, no screws\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInstallation note\u003c\/th\u003e\n\u003ctd\u003eMay require shorter Z end-stop blades\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaintenance\u003c\/th\u003e\n\u003ctd\u003eClean with isopropyl alcohol\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eACC6049\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic 3D printers with magnetic plate system\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863821656,"sku":"ACC6049","price":108.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-pei-magnetique-ultem-texture-exo42-3.jpg?v=1779314569"},{"product_id":"plateau-pei-magnetique-ultem-texture-vs30-sc2-mk3","title":"VS30 (SC2\/MK3) Textured Magnetic PEI (ULTEM) Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe VS30 textured magnetic PEI (ULTEM) build plate is a flexible print surface made from a spring steel sheet coated on both sides with textured PEI (polyetherimide, commercial name ULTEM). It installs on the original magnetic support of the relevant Volumic Stream printers and replaces or supplements the plate supplied with the machine.\u003cbr\u003e\u003cbr\u003eThe PEI coating provides proven adhesion for common FDM filaments during printing, while releasing the part once the plate has cooled and been flexed by hand, simplifying part removal without a scraper.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe plate is positioned directly on the machine's magnetic bed, without tools. Its reversible design allows switching to the second face in the event of wear or contamination of the first, doubling the useful life before replacement. Routine maintenance is carried out with IPA to degrease the surface between prints. Note: depending on the printer's original configuration, installation may require shortening the Z end-stop blades to maintain correct bed levelling.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe textured surface produces a matt, granular finish on the first layer, suited to functional parts, industrial prototypes, and technical objects where a non-mirror finish is desired on the plate face. The flexible nature of the steel sheet facilitates release of large or wide-footprint parts, avoiding mechanical stress on the printer's components.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eFlexible magnetic build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSubstrate\u003c\/th\u003e\n\u003ctd\u003eSpring steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCoating\u003c\/th\u003e\n\u003ctd\u003eTextured PEI (ULTEM)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCoated faces\u003c\/th\u003e\n\u003ctd\u003eTwo faces (reversible plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic (on original magnetic support)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\u003ctd\u003eACC6071 – VS30 (SC2\/MK3)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInstallation precaution\u003c\/th\u003e\n\u003ctd\u003eShorter Z end-stop blades may be required depending on configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic printers with magnetic plate system\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream SC2 series (VS30 variant)\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream MK3 series (VS30 variant)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863887192,"sku":"ACC6071","price":67.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-pei-magnetique-ultem-texture-vs30-sc2mk3-3.jpg?v=1779284247"},{"product_id":"filtre-a-particules-pour-capot-stream","title":"Particulate Filter for STREAM Hood","description":"\u003cp style=\"text-align: justify;\"\u003eThe particulate filter for STREAM hood is a replacement HEPA filter for the enclosures of Volumic FDM Stream series 3D printers. It mounts on the filtration system integrated into the enclosure and retains fine particles generated during printing (molten filament microparticles, dust, and suspended residues inside the heated enclosure).\u003cbr\u003e\u003cbr\u003ePeriodic replacement is required to maintain the air quality expelled by the enclosure and the performance of the filtration system: it forms part of preventive maintenance suited to professional environments where emission control is an installation requirement (design offices, workshops, laboratories, professional fab labs).\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out according to printer usage frequency, the type of filaments used, and the observed contamination of the installed filter. The procedure is performed with the enclosure open, machine switched off and cooled, by accessing the filtration housing on the Stream enclosure. The used filter must be handled with appropriate PPE (gloves, mask) and disposed of in accordance with the rules applicable to industrial waste containing fine particles.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eReplacement HEPA particulate filter\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\u003ctd\u003eACC896\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget equipment\u003c\/th\u003e\n\u003ctd\u003eVolumic Stream FDM printer enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFiltration technology\u003c\/th\u003e\n\u003ctd\u003eHEPA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eRetention of fine particles emitted during printing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eReplacement part \/ maintenance consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream series printer enclosures\u003c\/li\u003e\n  \u003cli\u003eCompatible with Stream VS20, VS30, MK1, and MK2 enclosures\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863952728,"sku":"ACC896","price":81.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/filtre-a-particules-pour-capot-stream-3.jpg?v=1779347852"},{"product_id":"capteur-de-chauffe-mk2-v2-cartouche","title":"MK2 v2 Heater Sensor (cartridge)","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK2 v2 heater sensor (cartridge) is a replacement temperature probe dedicated to the extrusion printheads of Volumic FDM Stream series 3D printers, in cartridge format. It continuously measures the temperature of the heater block (hotend) and transmits the reading to the control board for PID regulation of extrusion.\u003cbr\u003e\u003cbr\u003eThis spare part allows a faulty or drifting sensor to be replaced (erratic readings, temperature errors during printing, thermal safety trigger) without having to replace the entire printhead. The kit includes one sensor and its pre-assembled cable.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation is carried out with the printhead cooled and the machine switched off, by partially dismantling the hotend according to the procedure documented by Volumic in its online technical support. The sensor is seated in its dedicated housing on the heater block, and the cable is connected to the corresponding connector on the control board. A heating test and PID verification must be carried out after reassembly to validate thermal regulation and ensure the reproducibility of extrusion parameters.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eHotend temperature sensor (cartridge version)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\u003ctd\u003ePID815\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVersion\u003c\/th\u003e\n\u003ctd\u003ev2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eKit contents\u003c\/th\u003e\n\u003ctd\u003e1 sensor + 1 cable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eHeater block temperature measurement and regulation\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream series printers fitted with a cartridge-sensor hotend\u003c\/li\u003e\n  \u003cli\u003eStream 20 Pro MK1 and Stream 20 Pro MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Pro MK1 and Stream 30 Pro MK2\u003c\/li\u003e\n  \u003cli\u003eStream 20 Dual MK1 and Stream 20 Dual MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Dual MK1 and Stream 30 Dual MK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893865361752,"sku":"PID815","price":9.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_capteur-de-chauffe-mk2-v2-cartouche.jpg?v=1775217405"},{"product_id":"microswitch-de-butee-x-y-z-endstop","title":"X\/Y\/Z Endstop Microswitch","description":"\u003cp style=\"text-align: justify;\"\u003eThe X\/Y\/Z end-stop microswitch is a replacement mechanical limit switch dedicated to Volumic Stream series FDM printers. It is fitted to the X, Y, and Z axes and is the reference component used by the machine for its home position (homing) at the start of each print job: the mechanical contact of the microswitch signals the zero position of the corresponding axis to the control board.\u003cbr\u003e\u003cbr\u003eThis spare part allows a faulty endstop to be replaced — one that triggers spuriously, exhibits a false contact, or fails to return position — without having to work on the entire machine wiring loom.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe microswitch is supplied bare, for soldering: its integration requires removing the faulty component, desoldering its connections, and re-soldering the new component onto the same pads. The operation is carried out with the machine switched off, by an operator with fine electronic soldering skills. A homing test on all three axes must be carried out after reassembly to validate correct sensor triggering and the consistency of the zero position with the machine's software references.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eLimit switch microswitch (mechanical endstop)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\u003ctd\u003ePID1019\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAxes concerned\u003c\/th\u003e\n\u003ctd\u003eX, Y, and Z\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eConnection type\u003c\/th\u003e\n\u003ctd\u003eTo be soldered (bare component)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eZero-position detection for axis homing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream series printers\u003c\/li\u003e\n  \u003cli\u003eStream 20 Pro MK1 and Stream 20 Pro MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Pro MK1 and Stream 30 Pro MK2\u003c\/li\u003e\n  \u003cli\u003eStream 20 Dual MK1 and Stream 20 Dual MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Dual MK1 and Stream 30 Dual MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Ultra\u003c\/li\u003e\n  \u003cli\u003eStream 30 SC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874372952,"sku":"PID1019","price":5.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_microswitch-de-butee-xyz-endstop-1_d1b08804-5864-400f-a22b-6d35425e7c47.jpg?v=1775220970"},{"product_id":"blower-stream-series","title":"STREAM Series Blower Fan","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM Series Blower is the replacement radial part-cooling fan dedicated to Volumic FDM printers. Its function is to blow a directed airflow onto the part being printed, immediately after filament deposition, to rapidly solidify the material and improve the quality of bridges, overhangs, and fine details.\u003cbr\u003e\u003cbr\u003eThis part meets the mechanical and electrical specifications of the blower fitted as standard to all Stream, SH, and EXO series, as well as the IDRE and Performance variants, ensuring a flow rate, connector, and thermal signature consistent with the calibration profiles of Volumic firmwares.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation is carried out on the dedicated extruder carriage housing, with connection to the corresponding connector on the machine's electronics board. Replacement requires partial dismantling of the extrusion carriage; Volumic provides online technical support, to be consulted according to the printer model, to ensure correct reassembly and preserve the fan's PWM regulation as well as the correct positioning of the airflow relative to the nozzle.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eRadial part-cooling fan (blower)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\u003ctd\u003ePID1020\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eCooling of freshly extruded filament\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\u003ctd\u003e1 fan\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream, SH, and EXO series printers (Standard and Plus versions)\u003c\/li\u003e\n  \u003cli\u003eStream 20 Pro MK1, MK2 and Stream 30 Pro MK1, MK2, MK3\u003c\/li\u003e\n  \u003cli\u003eStream 20 Dual MK1, MK2 and Stream 30 Dual MK1, MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Ultra\u003c\/li\u003e\n  \u003cli\u003eStream 30 SC and Stream 30 SC2 (standard and Performance versions)\u003c\/li\u003e\n  \u003cli\u003eSH65 and SH65 IDRE\u003c\/li\u003e\n  \u003cli\u003eEXO42 and EXO42 IDRE\u003c\/li\u003e\n  \u003cli\u003eEXO65 and EXO65 IDRE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874438488,"sku":"PID1020","price":35.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_blower-stream-series-2.jpg?v=1775231776"},{"product_id":"bloc-de-chauffe-complet-stream-mk2","title":"STREAM MK2 Complete Heater Block","description":"\u003cp style=\"text-align: justify;\"\u003eThe complete STREAM MK2 heater block is a replacement component for Volumic STREAM MK2 FDM 3D printers. The assembly integrates the heating cartridge, the thermal sensor, and a cable with quick-change connector to facilitate maintenance operations on the printhead.\u003cbr\u003e\u003cbr\u003eSupplied without nozzle or heat break, this block allows replacement of the heating section only whilst retaining compatible components already present on the printer. Its interchangeable design facilitates servicing in production or prototyping environments that require rapid recommissioning.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement of the heater block requires careful handling of the heat break and heating cables to avoid any deformation or fracture caused by high thermal cycling. After the intervention, a PID recalibration of the printhead is recommended to maintain stable thermal regulation and limit the risks of under-extrusion or temperature variation.\u003cbr\u003e\u003cbr\u003eThis component is designed for the high-temperature extrusion systems of STREAM MK2 machines, compatible with a wide range of technical thermoplastics used in professional additive manufacturing.\u003c\/p\u003e\n\u003ch2\u003eMachine compatibility\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe heater block is designed for Volumic STREAM MK2 interchangeable printheads. It fits single or dual extrusion configurations compatible with the range, with the original quick-connect system. The use of correctly fitted, compatible components helps preserve extrusion quality and the thermal stability of the complete hotend.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eComplete heater block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded items\u003c\/th\u003e\n\u003ctd\u003eHeating cartridge, thermal sensor, cable with quick-change connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExcluded items\u003c\/th\u003e\n\u003ctd\u003eNozzle, heat break\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnection system\u003c\/th\u003e\n\u003ctd\u003eQuick-change connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eSTREAM MK2 interchangeable printhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtrusion compatibility\u003c\/th\u003e\n\u003ctd\u003eSingle and dual extrusion depending on machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePID1025\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolumic STREAM MK2 FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic STREAM 20 PRO MK2\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic STREAM 30 PRO MK2\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic STREAM 20 DUAL MK2\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic STREAM 30 DUAL MK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874504024,"sku":"PID1025","price":96.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/bloc-de-chauffe-complet-stream-mk2-3.jpg?v=1779366775"},{"product_id":"plateau-vitroceramique-stream30-ultra-sc","title":"STREAM30 ULTRA\/SC Glass-Ceramic Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM 30 UltraSC glass-ceramic build plate is a print surface for Volumic STREAM 30 series FDM 3D printers. Its glass-ceramic surface ensures homogeneous heat distribution across the entire print area to minimise thermal variations during production cycles.\u003cbr\u003e\u003cbr\u003eDesigned for professional and intensive use, this build plate helps improve first-layer adhesion whilst facilitating part release after cooling. It fits as an original replacement part on compatible STREAM series systems.\u003c\/p\u003e\n\u003ch2\u003eThermal behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe glass-ceramic surface exhibits good dimensional stability during heated bed warm-up cycles. This characteristic helps maintain the flatness required for prints needing a consistent first layer, particularly with materials sensitive to shrinkage or warping.\u003cbr\u003e\u003cbr\u003eThe build plate can be used with various adhesion aids depending on the polymers employed and production constraints. Regular cleaning of the surface is recommended to preserve adhesion performance and print repeatability.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and integration\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis spare part is designed for replacement of the original build plate on compatible STREAM 30 UltraSC printers. Installation must be carried out on a machine that is switched off, with levelling and build plate parallelism checked after fitting to ensure homogeneous extrusion across the entire print surface.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003ePrint surface for heated bed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eReplacement part\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eVolumic STREAM 30 UltraSC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM 30 range\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic STREAM 30 UltraSC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874733400,"sku":"PID1036","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_plateau-vitroceramique-stream30-ultrasc.jpg?v=1775210191"},{"product_id":"barriere-thermique-ultra-sc-mk3","title":"Gen4 Heat Break (ULTRA\/SC\/SC2\/MK3\/SH\/EXO)","description":"\u003cp style=\"text-align: justify;\"\u003eThis Gen4 titanium heat break is a spare part for the printheads of Volumic STREAM ULTRA, SC, SC2, MK3, SH65, and EXO42 ranges. Designed to limit thermal creep between the heater block and the extrusion system, it contributes to temperature stability during long prints or at high flow rates.\u003cbr\u003e\u003cbr\u003eIts titanium construction reduces heat transfer in the cold zone of the printhead, to limit the risks of premature filament softening and blockage phenomena caused by heat creep.\u003c\/p\u003e\n\u003ch2\u003eIntegration and maintenance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis part integrates into the compatible extrusion assemblies of the Volumic Gen4 range. It is suited to preventive maintenance or replacement operations on professional FDM printers used in prototyping, small-batch production, or continuous manufacturing.\u003cbr\u003e\u003cbr\u003eAlso compatible with certain earlier MK2 machine generations, this heat break is adapted to environments requiring controlled thermal consistency and stable, continuous extrusion of technical materials.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eHeat break\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003ctd\u003eGen4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eThermal isolation of the printhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eSTREAM ULTRA, SC, SC2, MK3, SH65, EXO42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAdditional compatibility\u003c\/th\u003e\n\u003ctd\u003eAlso compatible with MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eFDM printhead maintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolumic FDM 3D printers fitted with a Gen4-compatible printhead\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM30 ULTRA\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM30 ULTRA SUPERCHARGED\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM30 ULTRA SUPERCHARGED 2\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM20 \u0026amp; 30 PRO MK1\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM20 \u0026amp; 30 PRO MK2\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM30 PRO MK3\u003c\/li\u003e\n\u003cli\u003eCompatible SH65\u003c\/li\u003e\n\u003cli\u003eCompatible EXO42\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874766168,"sku":"PID1049","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_barriere-thermique-ultrascmk3-2.jpg?v=1775213793"},{"product_id":"courroie-remplacement-x-ou-y-ultra-sc-mk3-sc2-100cm","title":"X or Y Replacement Belt ULTRA\/SC\/MK3\/SC2 (100 cm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis replacement X or Y axis belt is designed for Volumic ULTRA, SC, MK3, and SC2 series FDM 3D printers. Used in the axis movement system, it transmits motion between the stepper motors and the mechanical guidance assemblies to ensure positional accuracy during FDM printing.\u003cbr\u003e\u003cbr\u003eIts GT2 profile is suited to kinematics requiring regular movement synchronisation and stable long-term tension, particularly during extended print cycles or at high travel speeds.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis spare part is designed for preventive or corrective maintenance operations on compatible Volumic range printers. Replacing a worn belt limits dimensional accuracy losses, axis offset, or tension variations that can affect the surface quality of printed parts.\u003cbr\u003e\u003cbr\u003eIt is suited to professional prototyping, additive production, and intensive-use environments that require reliable drive mechanics and controlled movement repeatability.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eReplacement belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBelt type\u003c\/th\u003e\n\u003ctd\u003eGT2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMotion transmission on X or Y axis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e100 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eULTRA, SC, MK3, SC2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMechanical maintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGT2-compatible Volumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM ULTRA\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM SC\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM30 PRO MK3\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM SC2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874798936,"sku":"PID1053","price":13.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_courroie-remplacement-x-ou-y-ultra-gt2-9-1m.jpg?v=1775217424"},{"product_id":"entrainement-inox-mk2-ultra","title":"Stainless Steel Drive MK2\/ULTRA","description":"\u003cp style=\"text-align: justify;\"\u003eThis stainless steel drive is a spare part for the extrusion systems of Volumic MK2 and ULTRA FDM 3D printers. Integrated into the filament feed mechanism, it transmits the drive force between the extrusion motor and the consumable to maintain consistent extrusion during FDM printing.\u003cbr\u003e\u003cbr\u003eIts stainless steel construction provides good wear resistance in production or intensive-use environments, particularly with technical or filled materials that require higher extrusion pressure.\u003c\/p\u003e\n\u003ch2\u003eOperation in extrusion\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis part directly influences the regularity of filament advance towards the heat zone. A drive in good condition helps limit grip losses on the filament, flow variations, or under-extrusion that can affect the dimensional quality and surface finish of printed parts.\u003cbr\u003e\u003cbr\u003eIt is suited to preventive or corrective maintenance operations on the compatible printheads of the Volumic range, in prototyping, additive manufacturing, and continuous production contexts.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eExtrusion drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFilament drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eExtrusion system maintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eMK2 and ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM MK2\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM ULTRA\u003c\/li\u003e\n\u003cli\u003eCompatible relevant Volumic extrusion systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874831704,"sku":"PID1055","price":16.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/entrainement-inox-mk2ultra-3.jpg?v=1779369638"},{"product_id":"ventilateur-tete-ultra-2x-30x10mm","title":"Dual Printhead Fan (ULTRA) (2× 30×10 mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis double printhead fan is designed for Volumic ULTRA FDM 3D printers. Integrated into the printhead cooling system, it provides the thermal dissipation around the heat sink and extrusion zone needed to maintain stable operating conditions during FDM printing.\u003cbr\u003e\u003cbr\u003eControlled printhead cooling helps limit heat creep phenomena and filament behaviour variations in the cold zone, particularly during long prints or when using technical materials sensitive to thermal variation.\u003c\/p\u003e\n\u003ch2\u003eThermal management in printing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe dual-fan system provides continuous air circulation around the printhead components to preserve material flow stability and extrusion consistency. This part also contributes to maintaining the mechanical and thermal performance of the extrusion system in production or intensive prototyping environments.\u003cbr\u003e\u003cbr\u003eDesigned for maintenance or replacement operations, this assembly is compatible with ULTRA printhead configurations requiring permanent active cooling.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eDouble printhead fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003ePrinthead cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eULTRA range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM ULTRA\u003c\/li\u003e\n\u003cli\u003eCompatible ULTRA printhead systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874864472,"sku":"PID1057","price":23.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/double-ventilateur-tete-ultra-3.jpg?v=1779370194"},{"product_id":"roulement-compresseur-mk2-ultra-624","title":"MK2\/ULTRA Compressor Bearing (624)","description":"\u003cp style=\"text-align: justify;\"\u003eThe 624ZZ bearing is a mechanical component used in various moving assemblies of FDM 3D printers, notably for guidance, tensioning, or drive systems. Fitted with metal shields on both sides, it limits the ingress of dust and particles from the printing environment to preserve rotational smoothness over time.\u003cbr\u003e\u003cbr\u003eThis type of bearing is suited to repeated movements and the mechanical stresses encountered in prototyping, additive production, and continuous-use environments on professional machines.\u003c\/p\u003e\n\u003ch2\u003eMechanical operation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe bearing reduces friction on axes and moving components to ensure smooth movement and stable kinematics. A bearing in good condition helps limit mechanical play, parasitic vibrations, and accuracy losses that can affect the dimensional quality of printed parts.\u003cbr\u003e\u003cbr\u003eThis part is suited to preventive or corrective maintenance operations on compatible mechanical systems requiring smooth rotation and controlled operation over extended cycles.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eMechanical bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003e624ZZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection type\u003c\/th\u003e\n\u003ctd\u003eDouble metal shields\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMechanical guidance and rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM 3D printers using 624ZZ bearings\u003c\/li\u003e\n\u003cli\u003eCompatible guidance and mechanical drive systems\u003c\/li\u003e\n\u003cli\u003eCompatible tensioning and axis movement assemblies\u003c\/li\u003e\n\u003cli\u003eCompatible relevant Volumic equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874962776,"sku":"PID1233","price":3.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_roulement-compresseur-mk2ultra-624.jpg?v=1775220978"},{"product_id":"cache-tete-stream-ultra-sc","title":"STREAM ULTRA SC Printhead Cover","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM ULTRA SC printhead cover is the replacement shroud dedicated to the extrusion printhead of Volumic Stream Ultra SC FDM printers. It wraps around the hotend assembly and printhead mechanics, providing both protection for internal components (wiring loom, cooling, sensors) and channelling of the airflow generated by the part-cooling fan.\u003cbr\u003e\u003cbr\u003eThis spare part allows a damaged, cracked, or filament-splattered cover to be replaced without working on the thermal components of the hotend. The shroud also contributes to the finished appearance of the machine in a serial production workshop.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe cover mounts directly onto the extrusion printhead, with the machine switched off and the hotend cooled, following the procedure documented by Volumic in its online technical support. The operation requires no disassembly of the heater block or modification of the wiring: it is a purely mechanical replacement, within the capability of a level 1 maintenance operator. A visual check of correct positioning and unobstructed airflow must be carried out after reassembly.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eExtrusion printhead cover \/ shroud\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eProtection of printhead components and channelling of cooling airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ aesthetic and functional maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream Ultra SC series printers\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 SC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874995544,"sku":"PID1686","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_753-Cache-tete-STREAM-ULTRA-v2.jpg?v=1775228207"},{"product_id":"ventilateur-tete-ultra-sc-mk3-sc2-s","title":"ULTRA SC\/MK3\/SC2\/S Printhead Fan","description":"\u003cp style=\"text-align: justify;\"\u003eThis printhead fan is designed for Volumic SC, MK3, SC2, SH65, and EXO42 FDM 3D printers. Integrated into the printhead cooling system, it provides the thermal dissipation needed to maintain a stable cold zone during FDM print cycles.\u003cbr\u003e\u003cbr\u003eContinuous printhead cooling helps limit heat creep in the extrusion duct, which can cause flow variations, blockages, or consistency losses when printing technical materials.\u003c\/p\u003e\n\u003ch2\u003eThermal management and maintenance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis part contributes to maintaining extrusion system performance by ensuring continuous airflow around the heat sink. A functional fan helps preserve extrusion stability and filament behaviour in additive production, prototyping, and intensive-use environments.\u003cbr\u003e\u003cbr\u003eDesigned for preventive or corrective maintenance operations, this fan is compatible with several generations of Volumic printheads used on the brand's professional platforms.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003ePrinthead fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003ePrinthead cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eSC, MK3, SC2, SH65, EXO42\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM SC\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM30 PRO MK3\u003c\/li\u003e\n\u003cli\u003eCompatible STREAM SC2\u003c\/li\u003e\n\u003cli\u003eCompatible SH65\u003c\/li\u003e\n\u003cli\u003eCompatible EXO42\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875028312,"sku":"PID1699","price":11.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_ventilateur-tete-ultra-scmk3sc2sh65exo42-gauchedroite-2.jpg?v=1775235398"},{"product_id":"ventilateur-tete-ultra-sc-droit-5cm","title":"ULTRA SC Right-Angle Printhead Fan (5 cm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis 5 cm straight printhead fan is a spare part for Volumic Ultra SC FDM 3D printers. It provides cooling of the extrusion printhead to maintain a stable temperature at the heat sink level and limit the risk of overheating during long or high-temperature print phases.\u003cbr\u003e\u003cbr\u003eMaintaining a constant airflow also contributes to extrusion consistency for technical materials sensitive to heat creep or cold zone blockage. This part is designed to replace a worn, damaged, or underperforming original fan.\u003c\/p\u003e\n\u003ch2\u003ePrinthead cooling\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrinthead cooling plays an essential role in the operation of high-temperature FDM systems. A faulty fan can cause thermal variations, filament jams, or safety errors related to extruder overheating.\u003cbr\u003e\u003cbr\u003eThis model is suited to preventive or corrective maintenance on compatible Volumic machines. Its compact format facilitates integration into the printhead assembly without modifying the original cooling system.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFan replacement must be carried out with the machine switched off, checking the wiring condition and the absence of dust or polymer residue accumulation in the ventilation zone. Controlled airflow helps preserve the thermal performance of the printhead and the stability of prints over extended cycles.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003ePrinthead fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting\u003c\/th\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eExtrusion printhead cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer compatibility\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic Ultra SC series\u003c\/li\u003e\n\u003cli\u003eCompatible Volumic printheads with straight 5 cm fan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875093848,"sku":"PID1700","price":11.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ventilateur-tete-ultra-sc-droit-5cm-3.jpg?v=1779371581"},{"product_id":"kit-pieces-plastiques-extrudeur-ultra-v2","title":"ULTRA v2 Extruder Plastic Parts Kit","description":"\u003cp style=\"text-align: justify;\"\u003eThis plastic parts kit for the Ultra V2 extruder is designed for the replacement or reconditioning of structural components of the extruder on compatible Volumic FDM 3D printers. It groups the polymer components providing mechanical support, guidance, and stability for the filament drive assembly within the FDM extrusion system.\u003cbr\u003e\u003cbr\u003eThese parts are used during preventive or corrective maintenance operations to restore original assembly tolerances and ensure stable extrusion operation over extended cycles.\u003c\/p\u003e\n\u003ch2\u003eRole in the extrusion system\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe extruder is a critical element in the filament feed chain. The plastic parts in the kit contribute to filament alignment, bearing retention, and the overall rigidity of the assembly. Wear or deformation can cause flow variations, under-extrusion, or inter-layer adhesion losses.\u003cbr\u003e\u003cbr\u003eReplacing these elements restores operation in line with the mechanical tolerances specified by the manufacturer for professional printing environments.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and reconditioning\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe kit is designed for maintenance operations on Ultra V2 extruders. Its use typically occurs during a complete disassembly of the drive assembly, in cases of mechanical wear, cracking, or loss of rigidity in the polymer parts.\u003cbr\u003e\u003cbr\u003eRegular inspection of the extruder contributes to stable filament feed, particularly during long prints or with technical materials requiring constant extrusion pressure.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003ePlastic parts kit for extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem concerned\u003c\/th\u003e\n\u003ctd\u003eUltra V2 extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eMechanical support and filament guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable materials\u003c\/th\u003e\n\u003ctd\u003eTechnical polymers (depending on version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours and diameters depending on configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eSystems fitted with Ultra V2 extruder\u003c\/li\u003e\n\u003cli\u003eVolumic machines of compatible Ultra generation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875224920,"sku":"PID3298","price":79.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/kit-pieces-plastiques-extrudeur-ultra-v2-3.jpg?v=1779371902"},{"product_id":"ventilateur-tete-mk2-30x10mm","title":"MK2 Printhead Fan (30×10 mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis MK2 printhead fan in 30 × 10 mm format is a replacement component for Volumic FDM printing systems fitted with a compatible extrusion printhead. It cools the hot zone and heat sink to stabilise filament behaviour during FDM extrusion.\u003cbr\u003e\u003cbr\u003eEffective printhead cooling limits heat creep in the heat break and contributes to consistent material flow, particularly during long prints or with technical materials sensitive to temperature variations.\u003c\/p\u003e\n\u003ch2\u003ePrinthead thermal management\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe printhead fan plays a central role in extruder thermal stability. Insufficient or irregular airflow can cause feed defects, partial blockages, or viscosity variations of the polymer in the solid\/liquid transition zone.\u003cbr\u003e\u003cbr\u003eThis type of component is used for preventive or corrective maintenance to maintain constant thermal conditions and preserve print quality over repetitive production cycles.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFan replacement must be carried out with the machine switched off, checking for absence of obstruction in the air ducts and the condition of mechanical fixings. Accumulation of dust or polymer residues can significantly reduce cooling efficiency.\u003cbr\u003e\u003cbr\u003eRegular maintenance of the ventilation system contributes to extending printhead service life and maintaining stable extrusion across different material types.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eExtrusion printhead fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003e30 × 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003ePrinthead cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours and diameters depending on configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003ePrintheads fitted with MK2 fan\u003c\/li\u003e\n\u003cli\u003eVolumic systems of compatible MK2 generation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875257688,"sku":"PID3305","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ventilateur-tete-mk2-30x10mm-3_78c77413-0905-445d-b1d9-0c52ab76733a.jpg?v=1779372310"},{"product_id":"pate-thermique","title":"Thermal Paste","description":"\u003cp style=\"text-align: justify;\"\u003eThermal paste is an interface material designed to improve heat transfer between two solid surfaces in imperfect contact, typically between a heating element and a heat sink. In the context of professional 3D printing, it is used on hotend assemblies, heater blocks, sensors, or electronic components to reduce thermal resistance and ensure more homogeneous heat dissipation. Its formulation is optimised to provide good thermal conductivity whilst maintaining stable application in a thin layer.\u003c\/p\u003e\n\u003ch2\u003eApplication and uses\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eApplication is made in a very thin layer on clean, degreased surfaces, before mechanical assembly of the components. A small amount is sufficient to avoid any excess that could interfere with thermal contact. This type of paste is commonly used on FDM 3D printer extrusion assemblies, as well as on embedded electronic systems or heat sinks requiring controlled thermal dissipation. Multiple packaging formats, colours, and sizes may exist depending on the series and industrial applications.\u003c\/p\u003e\n\u003ch2\u003eStorage and precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe product must be stored in its original packaging, sealed after use, to prevent contamination by dust or drying out. Storage at ambient temperature, away from direct heat and extreme temperature variations, preserves its application properties. During handling, avoid contact with optical surfaces or areas not involved in thermal dissipation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eThermal paste (thermal conduction interface)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eThermal interfaces for electronic components and 3D printing systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eVariable depending on version (not specified)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eMay vary depending on reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM 3D printers of all brands\u003c\/li\u003e\n\u003cli\u003eHotend assemblies and heater blocks\u003c\/li\u003e\n\u003cli\u003eHeat sinks for industrial electronics\u003c\/li\u003e\n\u003cli\u003eElectronic boards and power modules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877715288,"sku":"PID3546","price":4.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_11_pate-thermique_ad47902f-697d-469e-9bb2-49701d68c111.jpg?v=1775242603"},{"product_id":"kit-maintenance-extrudeur-ultra","title":"ULTRA Extruder Maintenance Kit","description":"\u003cp style=\"text-align: justify;\"\u003eThe Ultra extruder maintenance kit is a set of parts designed for the servicing and reconditioning of extrusion systems used in FDM 3D printing. It groups the wear components and adjustment elements needed to maintain the mechanical and thermal performance of the extruder, particularly in a context of intensive professional use. This type of kit is used to restore material feed conditions, limit extrusion irregularities, and ensure production continuity on machines operated intensively in workshop or serial production environments.\u003cbr\u003e\u003cbr\u003eIts design is oriented towards rapid intervention on the extruder's critical zones, to reduce machine downtime during preventive or corrective maintenance operations. It allows the drive and filament guidance system to continue operating stably, limiting under-extrusion or blockage phenomena caused by wear of internal components.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and extrusion reconditioning\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis kit integrates into a maintenance approach for Ultra-type extruders, replacing components subject to friction or thermal stress. The intervention restores extrusion conditions in line with the machine's original specifications, particularly on FDM systems used continuously. It is intended for planned maintenance operations as well as corrective interventions in cases of material flow drift or degradation of feed regularity.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eMaintenance kit for 3D extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eServicing and reconditioning of FDM extrusion systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem concerned\u003c\/th\u003e\n\u003ctd\u003eUltra extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003ePreventive and corrective maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eMaintenance components (composition variable depending on version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eUltra-type extrusion systems\u003c\/li\u003e\n\u003cli\u003eVolumic 3D production machines fitted with Ultra extruder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877748056,"sku":"PID3557","price":82.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_03_kit-maintenance-extrudeur-ultra.jpg?v=1775228178"},{"product_id":"kit-maintenance-extrudeur-mk2","title":"MK2 Extruder Maintenance Kit","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK2 extruder maintenance kit is a set of parts designed for the servicing and replacement of wear components in the extrusion system of FDM 3D printers fitted with an MK2-generation extruder. It allows mechanical and thermal conditions necessary for stable filament feed to be restored, limiting material flow variations caused by wear of internal components. This type of kit is used in professional environments to maintain production continuity and reduce extrusion drift on machines operating in intensive use.\u003cbr\u003e\u003cbr\u003eDesigned for structured maintenance intervention, it facilitates replacement of the extruder's critical parts without modifying the overall system. The objective is to restore operation in line with the original tolerances of the drive assembly, ensuring regular filament feed and improved print repeatability over long cycles.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and extrusion restoration\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis kit integrates into a preventive or corrective maintenance approach for MK2 extruders used on professional 3D printing platforms. It is designed for the replacement of components subject to friction and thermal stress, helping to limit under-extrusion, slipping, or material flow variation phenomena. The assembly stabilises the behaviour of the filament feed system and extends the service life of the extruder in a continuous production context.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eMaintenance kit for 3D extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eServicing and restoration of FDM extrusion systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem concerned\u003c\/th\u003e\n\u003ctd\u003eMK2 extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003ePreventive and corrective maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003eReplacement components for extruder (composition variable depending on version)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVariants\u003c\/th\u003e\n\u003ctd\u003eAvailable in several configurations, colours, and diameters depending on references\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eMK2-type extrusion systems\u003c\/li\u003e\n\u003cli\u003eVolumic FDM printing equipment compatible with MK2 extruder\u003c\/li\u003e\n\u003cli\u003ePrototyping and production platforms in technical workshops\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877780824,"sku":"PID3558","price":57.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_10_kit-maintenance-extrudeur-mk2-1.jpg?v=1775224569"},{"product_id":"kit-maintenance-extrudeur-pour-tete-compatibilite","title":"Extruder Maintenance Kit for Compatible Printhead","description":"\u003cp style=\"text-align: justify;\"\u003eThe StandardPlus printhead extruder maintenance kit groups a set of parts designed for preventive and corrective maintenance of the extruder on Volumic FDM printing systems fitted with this architecture. It allows replacement of wear components to maintain stable extrusion and limit flow drift, under-extrusion, or material feed defects. Designed for professional use, it integrates into the regular maintenance operations of FDM machines, within a logic of production continuity and reduction of machine downtime.\u003c\/p\u003e\n\u003ch2\u003eFunction and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis kit is used during maintenance operations on the StandardPlus extrusion printhead to restore the original performance of the feed system. The intervention generally involves replacing components subject to mechanical or thermal wear, then verifying correct extrusion operation after reassembly. Flow calibration may be required depending on the initial condition of the printhead and its usage history.\u003c\/p\u003e\n\u003ch2\u003eMaintenance and production continuity\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eIn a production context, anticipating the replacement of extrusion components helps limit unplanned machine downtime and stabilise the quality of produced parts. The kit fits within a controlled maintenance approach for professional FDM printing equipment. Depending on machine configurations, consumables associated with the printing ecosystem may be available in several diameters and colours, without affecting StandardPlus printhead compatibility.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eExtruder maintenance kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eReplacement of extrusion printhead wear components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003ePreventive and corrective maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eVolumic StandardPlus printhead\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eKit of spare parts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eVolumic machines fitted with StandardPlus extrusion printhead\u003c\/li\u003e\n\u003cli\u003eVolumic ecosystem industrial 3D printing systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877813592,"sku":"PID3559","price":109.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_03_kit-maintenance-extrudeur-pour-tete-compatibilite.jpg?v=1775224586"},{"product_id":"plateau-vitroceramique-stream20","title":"STREAM20 Glass-Ceramic Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM glass-ceramic build plate is the replacement print surface for Volumic Stream first and second-generation FDM printers (MK1 and MK2), in Pro and Dual configurations. Made from glass-ceramic, it combines high flatness, low thermal expansion coefficient, and mechanical heat resistance — three characteristics sought in the adhesion zone of an industrial FDM printer.\u003cbr\u003e\u003cbr\u003eGlass-ceramic provides a surface that remains stable over time: it retains its reference geometry (levelling homogeneity, first-layer flatness) even after numerous thermal cycles, a necessary condition for reproducibility in serial production.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe build plate mounts on the machine's original heated carriage, following the procedure documented by Volumic in its online technical support. Once in place, it accepts FDM filaments compatible with direct deposition on glass-ceramic: an adhesive supplement such as 3DLac lacquer may be applied to adjust adhesion depending on the material being printed. Routine maintenance is carried out with IPA on a cold plate, to degrease the surface between prints and restore first-layer adhesion.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eBuild plate (print surface)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable sizes in the range\u003c\/th\u003e\n\u003ctd\u003eMultiple formats available depending on printer model\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eHigh flatness, low thermal expansion coefficient, good resistance to thermal cycling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ print surface\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream first and second-generation series printers\u003c\/li\u003e\n  \u003cli\u003eStream 20 PRO MK1 and Stream 20 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 PRO MK1 and Stream 30 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eStream 20 DUAL MK1 and Stream 20 DUAL MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 DUAL MK1 and Stream 30 DUAL MK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877911896,"sku":"PID375","price":36.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_plateau-vitroceramique-stream20-2.jpg?v=1775210181"},{"product_id":"plateau-vitroceramique-stream30","title":"STREAM30 Glass-Ceramic Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM glass-ceramic build plate is the replacement print surface dedicated to Volumic Stream 30 first and second-generation FDM printers (MK1 and MK2), in Pro and Dual configurations. Made from glass-ceramic, it combines controlled flatness, a low thermal expansion coefficient, and good mechanical heat resistance — three characteristics sought in the adhesion zone of an FDM printer in serial production.\u003cbr\u003e\u003cbr\u003eCompared to the Stream 20 version, this build plate covers a larger useful surface, suited to the increased print volumes of the Stream 30. The glass-ceramic retains its reference geometry (levelling homogeneity, first-layer flatness) after numerous thermal cycles, a necessary condition for the reproducibility of a prototyping or small industrial batch production line.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe build plate mounts on the machine's original heated carriage, following the procedure documented by Volumic in its online technical support. Once in place, it accepts FDM filaments compatible with direct deposition on glass-ceramic: an adhesive supplement such as 3DLac lacquer may be applied to adjust adhesion depending on the material and part geometry. Routine maintenance is carried out with IPA on a cold plate, to degrease the surface between prints and restore first-layer adhesion.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eBuild plate (print surface)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eSuited to Stream 30 print volume\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eControlled flatness, low thermal expansion coefficient, good resistance to thermal cycling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ print surface\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream 30 first and second-generation printers\u003c\/li\u003e\n  \u003cli\u003eStream 30 PRO MK1 and Stream 30 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 DUAL MK1 and Stream 30 DUAL MK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877944664,"sku":"PID376","price":43.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_03_plateau-vitroceramique-stream30.jpg?v=1775210188"},{"product_id":"tube-ptfe-extrudeur-externe-80mm","title":"External PTFE Extruder Tube (80 mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThe External Extruder PTFE Tube is the replacement filament guide component dedicated to Volumic Stream series FDM printers. The PTFE (polytetrafluoroethylene) tube guides the filament from the extruder output to the hotend inlet, in the section external to the extrusion carriage.\u003cbr\u003e\u003cbr\u003ePTFE is chosen for its very low friction coefficient, good chemical resistance, and resistance to high temperatures: these characteristics ensure consistent filament feed without extrusion jolts or material accumulation, which is critical on machines operating in serial production or with flexible materials sensitive to feed stress.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe tube is fitted into its push-fit connector following the procedure documented by Volumic in its online technical support, with the machine switched off and the hotend cooled. Replacement is recommended in cases of blockage, internal marking by a filled filament, or during a preventive maintenance operation on the extruder. Multiple lengths are available in the range depending on the printer model and the tube position in the guidance chain (external or internal section).\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eFilament guide tube (push-fit)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePTFE (polytetrafluoroethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePosition\u003c\/th\u003e\n\u003ctd\u003eExtruder, external section\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable lengths in range\u003c\/th\u003e\n\u003ctd\u003eMultiple lengths available depending on application\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eLow friction coefficient, good thermal and chemical resistance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance consumable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream series printers\u003c\/li\u003e\n  \u003cli\u003eStream 20 PRO MK1 and Stream 20 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 PRO MK1 and Stream 30 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eStream 20 DUAL MK1 and Stream 20 DUAL MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 DUAL MK1 and Stream 30 DUAL MK2\u003c\/li\u003e\n  \u003cli\u003eStream 30 Ultra\u003c\/li\u003e\n  \u003cli\u003eStream 30 SC\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878174040,"sku":"PID378","price":3.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_tube-ptfe-extrudeur-externe-80mm-2.jpg?v=1775220984"},{"product_id":"plateau-vitroceramique-magnetique-mk3-sc2","title":"MK3\/SC2 Magnetic Glass-Ceramic Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK3\/SC2 magnetic glass-ceramic build plate is the replacement print surface for Volumic Stream 30 PRO MK3 and Stream 30 SC2 FDM printers. It combines a glass-ceramic plate with a magnetic fixing system, simplifying build plate installation and removal during serial production operations.\u003cbr\u003e\u003cbr\u003eThe glass-ceramic provides controlled flatness, a low thermal expansion coefficient, and good mechanical resistance to thermal cycling, ensuring levelling homogeneity and consistent first layers over time. The magnetic fixing system enables rapid surface changeover (for example between a production-dedicated plate and a prototyping-dedicated plate), without tools.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe build plate is positioned directly on the machine's magnetic heated carriage, following the procedure documented by Volumic in its online technical support. Once in place, it accepts FDM filaments compatible with direct deposition on glass-ceramic: an adhesive supplement such as 3DLac lacquer may be applied to adjust adhesion depending on the material and part geometry. Routine maintenance is carried out with IPA on a cold plate, to degrease the surface between prints and restore first-layer adhesion.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eMagnetic build plate (print surface)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFixing\u003c\/th\u003e\n\u003ctd\u003eMagnetic, on original heated carriage\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eControlled flatness, low thermal expansion coefficient, good resistance to thermal cycling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ print surface\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream printers fitted with a magnetic heated carriage\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 SC2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878206808,"sku":"PID4298","price":67.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_11_plateau-vitroceramique-magnetique-mk3sc2-1.jpg?v=1775228199"},{"product_id":"chaussette-bloc-de-chauffe-v2-gen3","title":"Heater Block Sock v2 \u0026 Gen3","description":"\u003cp style=\"text-align: justify;\"\u003eThe STANDARD\/PLUS heater block silicone sock is a maintenance component for compatible Volumic printheads. Fitted around the heater block, it helps limit thermal variations in the extrusion zone and contributes to temperature stability during FDM print cycles.\u003cbr\u003e\u003cbr\u003eThis silicone protection also reduces the adhesion of molten filament residues on the heater block, making routine printhead maintenance easier and limiting material accumulation during long or repeated prints.\u003c\/p\u003e\n\u003ch2\u003eUse in production environments\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eDesigned for STANDARD\/PLUS heads in the Volumic range, this sock integrates into preventive maintenance operations on extrusion systems. Its fitting around the heater block helps preserve more homogeneous thermal distribution and limits direct exposure to cooling airflow.\u003cbr\u003e\u003cbr\u003eIt can be replaced rapidly during cleaning or heating element change operations. Its use is particularly relevant in printing environments requiring controlled thermal regularity and reduced downtime.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eHeater block silicone sock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eThermal protection of the heater block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinthead compatibility\u003c\/th\u003e\n\u003ctd\u003eSTANDARD\/PLUS printheads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDirect fitting on compatible heater block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eSTANDARD\/PLUS printheads\u003c\/li\u003e\n\u003cli\u003eVolumic STREAM30 ULTRA\u003c\/li\u003e\n\u003cli\u003eVolumic STREAM30 ULTRA SUPERCHARGED\u003c\/li\u003e\n\u003cli\u003eVolumic STREAM30 PRO MK3\u003c\/li\u003e\n\u003cli\u003eVolumic EXO42\u003c\/li\u003e\n\u003cli\u003eVolumic SH65\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878239576,"sku":"PID4368","price":5.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_chaussette-bloc-de-chauffe-v2-gen3.jpg?v=1775231793"},{"product_id":"barriere-thermique-tete-gen3","title":"Gen3 Printhead Heat Break","description":"\u003cp style=\"text-align: justify;\"\u003eThe Gen3 Printhead Heat Break is a replacement part for Volumic extrusion systems equipped with Gen3-generation printheads. Positioned between the heatsink and the heater block, it provides the thermal separation required for proper operation of the filament melt zone during FDM printing.\u003cbr\u003e\u003cbr\u003eThis part contributes to material flow stability by limiting heat creep towards the cold side of the extruder. Controlled thermal management helps reduce the risk of premature filament softening and clogging during long or repeated print runs.\u003c\/p\u003e \u003ch2\u003eIntegration into the extrusion system\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eDesigned for Volumic Gen3 printheads, this heat break is used in maintenance operations or replacement of components subject to thermal wear. Its role is particularly important when printing technical materials requiring high extrusion temperatures or extended print cycles.\u003cbr\u003e\u003cbr\u003eReplacing a damaged or fouled heat break preserves hotend performance and maintains consistent extrusion. This part is intended for use on compatible equipment from the manufacturer.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eHeat break\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eHotend thermal separation\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinthead compatibility\u003c\/th\u003e\n\u003ctd\u003eGen3 Printhead\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic Gen3 extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic Gen3 printheads\u003c\/li\u003e \u003cli\u003eVolumic machines compatible with Gen3 hotend\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878272344,"sku":"PID4373","price":53.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/barriere-thermique-tete-gen3-3.jpg?v=1785070028"},{"product_id":"bloc-de-chauffe-complet-performance","title":"Complete Performance Heater Block","description":"\u003cp style=\"text-align: justify;\"\u003eThe complete STANDARD\/PLUS HD Heater Block is a replacement assembly for compatible Volumic extrusion systems. Pre-assembled for rapid integration on the relevant printheads, it includes the elements required to maintain filament melt temperature in professional FDM use.\u003cbr\u003e\u003cbr\u003eThis complete configuration simplifies maintenance operations and reduces production downtime when replacing a worn or damaged heater block. Its design is suited to the thermal demands encountered during repeated or extended print runs.\u003c\/p\u003e \u003ch2\u003eThermal management and extrusion\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe heater block transfers heat from the heating cartridge to the nozzle to ensure homogeneous material melting before extrusion. Stable thermal distribution helps maintain consistent extrusion and limit flow variations during printing.\u003cbr\u003e\u003cbr\u003eCompatible with STANDARD\/PLUS HD printheads in the Volumic range, this assembly is intended for replacement operations on FDM equipment requiring preventive or corrective maintenance. It can be used in prototyping, series production, or technical manufacturing environments.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eComplete heater block\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinthead compatibility\u003c\/th\u003e\n\u003ctd\u003eSTANDARD\/PLUS HD\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFilament melting and thermal maintenance\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003ePre-assembled complete assembly\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eHotend maintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eSTANDARD\/PLUS HD printheads\u003c\/li\u003e \u003cli\u003eVolumic HD extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic machines compatible with STANDARD\/PLUS HD hotend\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878436184,"sku":"PID4484","price":131.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_bloc-de-chauffe-complet-performance.png?v=1775231790"},{"product_id":"barriere-thermique-ceramique-tete-gen3","title":"Gen3 Ceramic Heat Break","description":"\u003cp style=\"text-align: justify;\"\u003eThe Gen3 Performance Printhead Ceramic Heat Break is a replacement part dedicated to Volumic extrusion printheads in the Performance (Gen3) version, fitted on the FDM printers of the SH, EXO, and Stream series. Its function is to establish the thermal break between the heater block and the cooling body — a critical point for stabilising the filament melt zone and preventing heat creep into the cold side of the hotend.\u003cbr\u003e\u003cbr\u003eThis version combines a copper body, chosen for its high thermal conductivity, and a ceramic internal duct. The ceramic provides enhanced hardness of the filament channel and improved cooling, particularly sought after when printing highly abrasive or heavily filled materials.\u003c\/p\u003e\n\u003ch2\u003eApplications and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis part is particularly suited to demanding usage profiles: intensive printing of fibre-filled filaments (carbon, glass), metal composites, and heavily filled technical polymers. The ceramic duct limits wear of the extrusion channel which, on a standard heat break, degrades over time and leads to flow defects. Installation follows the procedure documented by Volumic in its online technical support, with the machine switched off and the printhead cooled; an extrusion test and E-step calibration are required after reassembly to validate consistent flow.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eHotend heat break (thermal separation)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003ctd\u003eGen3, dedicated to Performance printheads\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBody material\u003c\/th\u003e\n\u003ctd\u003eCopper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eInternal duct material\u003c\/th\u003e\n\u003ctd\u003eCeramic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eEnhanced channel hardness, improved cooling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTarget filaments\u003c\/th\u003e\n\u003ctd\u003eHighly abrasive filled materials (carbon fibre, glass fibre, composites)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ accessory for technical material printing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic extrusion printheads in Performance (Gen3) version\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 SC2\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42 and EXO65\u003c\/li\u003e\n  \u003cli\u003eNot intended for Standard and Plus series printheads\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878501720,"sku":"PID4511","price":58.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/barriere-thermique-ceramique-tete-gen3-3.jpg?v=1779435427"},{"product_id":"barriere-thermique-pro-1-75mm","title":"PRO Heat Break 1.75 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThis heat break is a replacement part for compatible Volumic extrusion systems. Positioned between the heater block and the heatsink, it limits heat transfer in the printhead to maintain a stable filament melt zone during FDM printing.\u003cbr\u003e\u003cbr\u003eIts design is suited to extrusion configurations using 1.75 mm filament and preserves hotend operation during maintenance or wear-part replacement operations.\u003c\/p\u003e \u003ch2\u003eIntegration into the extrusion system\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe heat break acts directly in the thermal separation between the hot zone and the cold zone of the extruder. Controlled heat dissipation helps limit clogging caused by excessive heat creep into the filament, particularly during long or high-temperature print runs.\u003cbr\u003e\u003cbr\u003eThis part is intended for compatible Volumic STREAM PRO series 3D printers and forms part of preventive maintenance operations on professional extrusion assemblies.\u003c\/p\u003e \u003ch2\u003eMaintenance and replacement\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eHeat break replacement may be required in the event of mechanical wear, thread degradation, or after several intensive thermal cycles. Regular inspection of hotend condition maintains stable extrusion and consistent deposition on technical prints.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eHeat break\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part for FDM printhead\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFilament compatibility\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\u003ctd\u003eAvailable according to compatible versions\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eSTREAM 20 PRO MK1, STREAM 30 PRO MK1, STREAM 20 PRO MK2, STREAM 30 PRO MK2\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eCompatible with STREAM PRO MK1\u003c\/li\u003e \u003cli\u003eCompatible with STREAM PRO MK2\u003c\/li\u003e \u003cli\u003eCompatible with 1.75 mm filament extrusion systems of the relevant ranges\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878534488,"sku":"PID465","price":22.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_barriere-thermique-pro-1.75mm-2-4_6e65414b-ff70-4e45-998d-e10f441b1aac.jpg?v=1775213789"},{"product_id":"tube-tete-interne-pro-65mm","title":"PRO Internal Printhead Tube (65 mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThe PRO Internal Printhead Tube is a replacement part for compatible Volumic extrusion systems. Integrated within the printhead, it guides the filament between the various zones of the hotend to ensure a consistent feed to the melt chamber during FDM printing.\u003cbr\u003e\u003cbr\u003eThis part maintains material flow continuity and limits internal friction that could affect extrusion quality. Replacement may be required as part of preventive maintenance or following wear from abrasive or filled materials.\u003c\/p\u003e \u003ch2\u003eOperation within the extrusion chain\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe internal tube provides the mechanical and thermal link between the various components of the printhead. Its adapted geometry preserves the filament channel whilst limiting the risk of blockage or deformation during repeated thermal cycles.\u003cbr\u003e\u003cbr\u003eCompatible with the relevant Volumic PRO printheads, this part is used in maintenance operations on FDM systems used in prototyping, technical production, or continuous manufacturing. Its installation contributes to maintaining stable extrusion behaviour on compatible equipment.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003ePrinthead internal tube\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eFilament guidance within the hotend\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinthead compatibility\u003c\/th\u003e\n\u003ctd\u003ePRO Printhead\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic PRO printheads\u003c\/li\u003e \u003cli\u003eCompatible Volumic extrusion systems\u003c\/li\u003e \u003cli\u003eProfessional Volumic machines using a PRO hotend\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878600024,"sku":"PID483","price":3.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_tube-tete-interne-pro-65mm-2.jpg?v=1775220993"},{"product_id":"barriere-thermique-dual-1-75mm","title":"DUAL Heat Break 1.75 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThis Dual Heat Break is a spare part for Volumic extrusion systems equipped with a dual-extrusion configuration. Installed between the heatsink and the heater block, it provides the thermal insulation required to maintain a stable filament melt zone during FDM printing.\u003cbr\u003e\u003cbr\u003eDesigned for professional print assemblies, this part contributes to consistent extrusion and limits heat creep into the heating body, particularly during long print runs or when using technical materials.\u003c\/p\u003e \u003ch2\u003eOperation in dual extrusion\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eIn a Dual architecture, the heat break contributes to the correct thermal balance of each extrusion path in order to preserve filament fluidity in the melt zone whilst limiting the risk of clogging in the cold section. Replacement may be required in the event of mechanical wear, thread deterioration, or after several intensive thermal cycles.\u003cbr\u003e\u003cbr\u003eThis part is suitable for preventive maintenance on compatible Volumic 3D printers equipped with a dual extrusion system.\u003c\/p\u003e \u003ch2\u003eMaintenance and integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe heat break integrates into the hotend assembly of the relevant printers and must be fitted carefully to ensure correct thermal contact between the heating and cooling elements. Regular maintenance of the extrusion system maintains stable printing conditions for technical production runs and extended series.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eDual Heat Break\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part for FDM extrusion system\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003ctd\u003eDual extrusion\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFilament compatibility\u003c\/th\u003e\n\u003ctd\u003eCompatible with multiple diameters depending on machine configuration\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eCompatible Volumic Dual 3D printers\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable references\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references depending on extrusion configuration\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eDual extrusion print configurations\u003c\/li\u003e \u003cli\u003eCompatible with Volumic Dual ranges\u003c\/li\u003e \u003cli\u003eCompatible with professional Volumic hotend assemblies\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878632792,"sku":"PID484","price":21.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/barriere-thermique-dual-1.75mm-3.jpg?v=1779463617"},{"product_id":"tube-tete-interne-dual-x2-66mm","title":"DUAL Internal Printhead Tube (×2 – 66 mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThe DUAL Internal Printhead Tube is a guidance part for Volumic DUAL-type printheads. Positioned within the printhead assembly, it routes the filament between the drive system and the melt zone to maintain a consistent feed during FDM extrusion cycles.\u003cbr\u003e\u003cbr\u003eThis maintenance consumable contributes to filament path stability and correct operation of multi-material or dual-extrusion prints. Replacement may be required in the event of internal wear, fouling, or degradation due to repeated thermal and mechanical stress.\u003c\/p\u003e \u003ch2\u003eMaintenance and implementation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eReplacing the internal tube restores controlled extrusion conditions on compatible printheads and limits the risk of excessive friction, under-extrusion, or filament blockage. This part is suited to preventive maintenance in professional environments or production workshops.\u003cbr\u003e\u003cbr\u003eThe pack includes two internal tubes, each 66 mm in length, designed for compatible Volumic DUAL systems. Installation must be carried out on a cooled and disassembled printhead, in accordance with the manufacturer's maintenance procedures.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eInternal printhead tube\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eSystem compatibility\u003c\/th\u003e\n\u003ctd\u003eDUAL Printhead\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eLength\u003c\/th\u003e\n\u003ctd\u003e66 mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003ePack of 2 tubes\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eFilament guidance for FDM extrusion\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references depending on compatible configurations\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic DUAL printheads\u003c\/li\u003e \u003cli\u003eCompatible STREAM20 \u0026amp; 30 DUAL MK1\u003c\/li\u003e \u003cli\u003eCompatible STREAM20 \u0026amp; 30 DUAL MK2\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878665560,"sku":"PID486","price":5.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/tube-tete-interne-dual-x2-66mm-3.jpg?v=1779464533"},{"product_id":"plateau-vitroceramique-magnetique-exo42","title":"EXO42 Magnetic Glass-Ceramic Build Plate","description":"\u003cp style=\"text-align: justify;\"\u003eThe Magnetic Glass-Ceramic Build Plate for EXO42 is a print surface component for Volumic large-format FDM systems. It combines a glass-ceramic base with a magnetic interface allowing quick attachment and removal of the build plate, whilst providing a flat surface suited to professional print cycles.\u003cbr\u003e\u003cbr\u003eThis type of build plate is used as an adhesion surface for printed parts and contributes to dimensional stability during first layers. Its design is oriented towards production, prototyping, and technical part manufacturing requiring good flatness and a homogeneous contact surface.\u003c\/p\u003e \u003ch2\u003ePrinting behaviour\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe glass-ceramic surface provides a rigid, stable base limiting deformation caused by thermal variations in the heated build plate. The magnetic interface simplifies maintenance operations and build plate replacement without requiring heavy mechanical intervention on the machine.\u003cbr\u003e\u003cbr\u003eThis type of build plate is suited to FDM materials commonly used in professional environments, with controlled first-layer adhesion and easy release after cooling, reducing the risk of part deformation during removal.\u003c\/p\u003e \u003ch2\u003eMaintenance and operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe magnetic glass-ceramic build plate is designed for repeated use in workshops or continuous production. Cleaning must be carried out on a cold surface to preserve adhesion properties and flatness quality.\u003cbr\u003e\u003cbr\u003eThe magnetic system allows quick build plate replacement in the event of wear or production configuration changes, minimising machine downtime and facilitating management of a 3D printer fleet.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eBuild plate\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFixing system\u003c\/th\u003e\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eAdditive manufacturing support\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\u003ctd\u003eEXO42 platform\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003eAvailable in several configurations depending on compatible models\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic large-format FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic EXO42 platform\u003c\/li\u003e \u003cli\u003ePrinting systems equipped with an interchangeable magnetic build plate\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878763864,"sku":"PID5376","price":179.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-vitroceramique-magnetique-exo42-6.jpg?v=1779464850"},{"product_id":"roulements-pour-double-entrainement-sc-sc2-mk3-sh-exo","title":"Bearings for Double Drive (SC\/SC2\/MK3\/SH\/EXO)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Double-Drive Bearings Pack is a replacement part dedicated to the filament drive axis of double-drive extruders fitted on Volumic FDM printers of the Stream 30, SH, and EXO series, in their Standard, Plus, IDRE, and Performance variants. The pack includes two stainless steel ball bearings to mount on the extruder drive axis.\u003cbr\u003e\u003cbr\u003eOn a double-drive system, two synchronised knurled wheels grip the filament to provide positive, slip-free drive. The bearings support the radial and axial loads generated by filament traction and the stepper motor torque. Periodic replacement is part of preventive maintenance for extruders in series production.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out when the bearings show play, stiffness, or rough movement, or in the event of extrusion irregularities not attributable to the hotend or filament. The operation is performed with the printer switched off and the extruder removed from the carriage, following the procedure documented by Volumic in its online technical support. A post-reassembly check is required: the axis must turn freely without stiffness, and the double-drive tension must be recalibrated to ensure consistent drive without filament deformation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eBall bearings for double-drive filament drive axis\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e2 bearings\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eDouble-drive extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ preventive maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic double-drive extruders of the Stream 30, SH, and EXO series\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 SC and Stream 30 SC2 (Standard and Performance versions)\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65 (Standard, IDRE, and Performance versions)\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42 (Standard, IDRE, and Performance versions)\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO65 (Standard, IDRE, and Performance versions)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879091544,"sku":"PID5932","price":9.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/roulements-pour-double-entrainement-scsc2mk3shexo-3.jpg?v=1779696204"},{"product_id":"moteur-extrudeur-mk1-mk2-ultra","title":"MK1\/MK2\/ULTRA Extruder Motor","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK1\/MK2\/ULTRA Extruder Motor is a replacement stepper motor dedicated to the extruders of Volumic FDM printers in the first and second-generation Stream range, as well as the Stream 30 Ultra. Its function is to drive the filament through the heater block at the flow rate imposed by the firmware, a critical operation for extrusion consistency and the dimensional quality of produced parts.\u003cbr\u003e\u003cbr\u003eThis reference is also used for the X-axis of the Stream MK1 and MK2 range, making it a versatile maintenance part to keep in stock in workshops operating a multi-machine fleet of these generations.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out when the motor exhibits missed steps, abnormal heating, insufficient torque, or unusual mechanical noise, or in the event of extrusion irregularities not attributable to the hotend, mechanical extruder, or filament. The operation is performed with the printer switched off, following the procedure documented by Volumic in its online technical support. After reassembly, an extrusion test and E-step calibration are required to validate consistent flow; for X-axis use, check belt tension and the absence of play at end stops.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eStepper motor (extruder \/ X-axis)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMain function\u003c\/th\u003e\n\u003ctd\u003eFilament drive on Stream MK1\/MK2\/Ultra extruder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSecondary function\u003c\/th\u003e\n\u003ctd\u003eX-axis motor on Stream MK1 and MK2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e1 motor\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream series first and second generation printers, and Stream Ultra\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 PRO MK1 and Stream 30 PRO MK1\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 DUAL MK1 and Stream 30 DUAL MK1\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 PRO MK2 and Stream 30 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 DUAL MK2 and Stream 30 DUAL MK2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 Ultra\u003c\/li\u003e\n  \u003cli\u003eUsable as X-axis motor on Stream MK1 and MK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879222616,"sku":"PID834","price":29.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/moteur-extrudeur-mk1mk2ultra-3.jpg?v=1779696994"},{"product_id":"cache-tete-v2-stream-pro","title":"STREAM PRO Printhead Cover v2","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM PRO v2 Printhead Cover is the replacement cowling part for the extrusion printhead of Volumic Stream 20 PRO MK2 and Stream 30 PRO MK2 FDM printers. It encloses the hotend assembly and printhead mechanics, providing both protection of internal components (wiring harness, ventilation, sensors) and channelling of the airflow generated by the part-cooling fan.\u003cbr\u003e\u003cbr\u003eThis replacement part makes it possible to replace a damaged, cracked, or filament-stained cover without any intervention on the thermal components of the hotend. The cowling also contributes to the finished appearance of the machine in series production workshops.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe cover mounts directly onto the extrusion printhead with the machine switched off and the hotend cooled, following the procedure documented by Volumic in its online technical support. The operation does not require disassembly of the heater block or modification of the wiring: it is a purely mechanical replacement, within reach of a level-1 maintenance operator. A visual check of correct positioning and free airflow must be carried out after reassembly.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003ePrinthead cover \/ cowling (v2 version)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFunction\u003c\/th\u003e\n\u003ctd\u003eProtection of printhead components and channelling of cooling airflow\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003ctd\u003eStream MK2 (second generation)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ aesthetic and functional maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic Stream second-generation series (MK2) — PRO versions\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 PRO MK2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879648600,"sku":"PID897","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/cache-tete-v2-stream-pro-3.jpg?v=1779698821"},{"product_id":"bloc-de-chauffe-ultra-sc-mk3-v2","title":"STANDARD\/PLUS Heater Block (NON HD)","description":"\u003cp style=\"text-align: justify;\"\u003eThe STANDARD\/PLUS Heater Block (NON HD) is the replacement part dedicated to the melt zone of the Volumic Stream Ultra and Stream SC v2 extrusion printheads, fitted on all Standard and Plus FDM printers from the brand. Made from high-temperature (HT) nickel-plated copper, it maintains the filament at the correct melt temperature immediately upstream of the nozzle, a critical point for consistent extrusion flow.\u003cbr\u003e\u003cbr\u003eThe copper and nickel-plating combination offers high thermal conductivity combined with good corrosion and wear resistance: the block delivers improved thermal performance and greater longevity compared to a standard aluminium block, a direct advantage on series production machines operating across extended temperature ranges. This reference is however not compatible with high-flow (HD) printheads, which use a dedicated heater block.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is required in the event of thermal degradation (deformation, non-cleanable deposits), filament leakage around the nozzle, or during a preventive maintenance operation on the hotend. The operation is performed with the printer switched off and the printhead cooled, following the procedure documented by Volumic in its online technical support; disassembly involves removing the nozzle, heating cartridge, and thermistor, which must be reinstalled with controlled torque and positioning. After reassembly, a PID tune and extrusion test are required to validate thermal regulation and consistent flow.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eHotend heater block (v2 version, NON HD)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHigh-temperature (HT) nickel-plated copper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eStream Ultra and Stream SC v2 printheads\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eImproved thermal performance, good longevity\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRestriction\u003c\/th\u003e\n\u003ctd\u003eNot compatible with high-flow (HD) printheads\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ hotend maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVolumic printers in Standard and Plus versions (non-HD printheads, v2)\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 PRO MK1 and Stream 30 PRO MK1\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 DUAL MK1 and Stream 30 DUAL MK1\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 PRO MK2 and Stream 30 PRO MK2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 20 DUAL MK2 and Stream 30 DUAL MK2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 SC and Stream 30 SC2\u003c\/li\u003e\n  \u003cli\u003eVolumic Stream 30 Ultra\u003c\/li\u003e\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n  \u003cli\u003eVolumic EXO42 and EXO65\u003c\/li\u003e\n  \u003cli\u003eNot compatible with printheads in high-flow (HD) configuration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879746904,"sku":"PID980","price":38.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/bloc-de-chauffe-standardplus-non-hd-3.jpg?v=1779699120"},{"product_id":"thermistor-ntc-100k-115-mm","title":"NTC Thermistor 100 k – 115 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe NTC 100k - 115 mm Thermistor is the replacement thermal sensor for Prusa Research FDM printers equipped with a Nextruder extruder (MK4, MK3.9, CORE One ranges). It provides real-time measurement of the heater block or heatsink temperature, a fundamental value used by the firmware to regulate the heating element and trigger the machine's thermal safety mechanisms.\u003cbr\u003e\u003cbr\u003eOf NTC type (negative temperature coefficient), with a nominal resistance of 100 kΩ, this sensor conforms to the profile expected by Prusa firmwares, ensuring controlled regulation without software recalibration on reassembly. Depending on the printer model, this thermistor is also used to monitor the heatsink temperature on the XL.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is carried out in the event of an inconsistent reading, a thermal error during printing, or physical sensor failure (wire break, loss of insulation). The operation is performed with the printer switched off and the hotend cooled, following the procedure documented on the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product is supplied with its M3×4 locking screw ready to install. After reassembly, verify the consistency of the cold-start reading and perform a PID tune to validate the stability of thermal regulation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart type\u003c\/th\u003e\n\u003ctd\u003eThermal sensor (NTC thermistor)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNominal resistance\u003c\/th\u003e\n\u003ctd\u003e100 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCable length\u003c\/th\u003e\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSensor type\u003c\/th\u003e\n\u003ctd\u003eNTC (negative temperature coefficient)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 × NTC 100k 115 mm thermistor + 1 × M3×4 locking screw\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\u003ctd\u003eInstallation procedure on help.prusa3d.com (by printer model)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eSpare part \/ hotend or heatsink maintenance\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa XL (heatsink temperature monitoring)\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n  \u003cli\u003eNot compatible with earlier generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with the MK3.5, MK3.5S, HT90, or INDX models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893893804376,"sku":"IDF__10601_IDS__1576","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9e4ee773-c070-4777-821c-dc3866a2a049.jpg?v=1779700115"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_parts_header_collection.webp?v=1779363599","url":"https:\/\/3dprint.shop\/en\/collections\/pieces-detachees.oembed?page=6","provider":"3DPrint.shop","version":"1.0","type":"link"}