{"title":"Spare parts","description":"\u003cp\u003eFind here all technical consumables and wear parts: complete hotends and elements (heatbreaks, heating blocks, nozzles, thermistors, heating cartridges), extruders and drive rollers, fans, GT2 belts, bearings, shafts and threaded rods, motherboards and drivers, screens, endstop and level sensors, FEP and nFEP films for resin, tanks, build plates, as well as periodic maintenance kits recommended by manufacturers.\u003c\/p\u003e","products":[{"product_id":"filtre-abek-v2-pour-capot-stream-ultra-mk3-sc-sc2-sh65-exo42","title":"ABEK v2 filter for STREAM ULTRA\/MK3\/SC\/SC2\/SH65\/EXO42 hood","description":"ABEK v2 filter compatible with STREAM ULTRA\/MK3\/SC\/SC2\/SH65\/EXO42 covers\u003cbr\u003e\n\u003cbr\u003e\n - Lifespan: ~1000 hours of printing","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831089410392,"sku":"ACC1138","price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_727-Filtre-ABEK-pour-capot-STREAM-ULTRA-v2.jpg?v=1775217390"},{"product_id":"plateau-magnetique-ultem-texture-sh65","title":"ULTEM textured magnetic board SH65","description":"Steel sheet tray with textured PEI coating on both sides.\u003cbr\u003e\n Note: May require shorter Z-endstop blades.","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831090098520,"sku":"ACC6050","price":116.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-pei-magnetique-ultem-texture-sh65-3.jpg?v=1779305391"},{"product_id":"capteur-de-chauffe-ultra-sc-mk3-sc2-sh65-exo42","title":"Heater sensor ULTRA\/SC\/MK3\/SC2\/SH65\/EXO42\/EXO65","description":"\u003cp style=\"text-align: justify;\"\u003eThe heating sensor (reference PID1051) is a genuine Volumic spare part designed to measure the temperature of the print head on a large part of the Stream, SH, and EXO ranges. The sensor continuously transmits the temperature of the hot zone to the printer's regulation system, which controls the heating element in a closed loop (PID) to maintain the set temperature during extrusion.\u003c\/p\u003e\n\u003ch2\u003eFunction and Replacement\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement typically occurs in cases of an incorrect temperature displayed by the printer, drift in thermal regulation, a discrepancy between the setpoint and the measured temperature, or a sudden interruption of printing due to a loss of sensor signal. It is a normal wear part in a production environment, and regular inspection is recommended for preventive maintenance.\u003cbr\u003e\u003cbr\u003eCompatibility covers the STANDARD and PLUS versions of the models concerned, as well as the STREAM30 SC2 Performance. Other Performance versions are not compatible with this reference: please refer to the part dedicated to the Performance series for these printers.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003ePID1051\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCategory\u003c\/th\u003e\n\n\u003ctd\u003eSpare part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrint head temperature measurement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCovered versions\u003c\/th\u003e\n\n\u003ctd\u003eStandard and Plus (+ STREAM30 SC2 Performance)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eOrigin\u003c\/th\u003e\n\n\u003ctd\u003eGenuine Volumic part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic STREAM30 ULTRA\u003c\/li\u003e\n\n  \u003cli\u003eVolumic STREAM30 SC and STREAM30 SC2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic STREAM30 SC2 Performance\u003c\/li\u003e\n\n  \u003cli\u003eVolumic STREAM30 PRO MK3\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n\n  \u003cli\u003eVolumic EXO42 and EXO65\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831090655576,"sku":"PID1051","price":19.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_capteur-de-chauffe-ultrascmk3sc2sh65exo42.jpg?v=1775217409"},{"product_id":"double-entrainement-inox-sc-sc2-mk3-sh65-exo42","title":"Double drive INOX SC\/SC2\/MK3\/SH65\/EXO42","description":"\u003cp style=\"text-align: justify;\"\u003eThe INOX dual drive is an extruder sub-assembly designed for Volumic 3D printers in the Stream range. Engineered to push filament between two synchronized gears, it ensures bilateral contact with the consumable and reduces the risk of slipping compared to a single drive.\u003cbr\u003e\u003cbr\u003eThe entire assembly is machined from stainless steel to withstand mechanical wear and corrosion over time, both in a prototyping workshop setting and in series production.\u003c\/p\u003e \u003ch2\u003eComposition and operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe part comes complete with its central shaft and two pre-installed needle cages, allowing for direct replacement without the need for third-party components.\u003cbr\u003e\u003cbr\u003eThe free rotation of the gears on their needle bearings maintains a regular drive torque and limits the stress on the stepper motor. Symmetrical contact with the filament improves force transmission and reduces the risk of slipping during printing with technical consumables.\u003c\/p\u003e \u003ch2\u003eCompatibility and precautions\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part is compatible with Volumic Stream SC, SC2, MK3, SH65, EXO42, and EXO65 printers, including their IDRE and Performance variations. It is not compatible with the Stream ULTRA range, which uses a specific drive system. Verifying the exact machine model is recommended before ordering.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eDual drive system\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eStainless steel (INOX)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachining\u003c\/th\u003e\n\n\u003ctd\u003ePrecision machined part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eIncluded elements\u003c\/th\u003e\n\n\u003ctd\u003eDrive gears, central shaft, 2 needle cages\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eFilament drive in the extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003ePID1670\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic Stream range 3D printers (excluding Stream ULTRA)\u003c\/li\u003e \u003cli\u003eStream30 SC, Stream30 SC2, Stream30 SC2 Performance\u003c\/li\u003e \u003cli\u003eStream30 Pro MK3\u003c\/li\u003e \u003cli\u003eSH65, SH65 IDRE, SH65 Performance\u003c\/li\u003e \u003cli\u003eEXO42, EXO42 IDRE, EXO42 Performance\u003c\/li\u003e \u003cli\u003eEXO65, EXO65 IDRE, EXO65 Performance\u003c\/li\u003e \u003cli\u003eNot compatible with Volumic Stream ULTRA\u003c\/li\u003e \u003c\/ul\u003e\n","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831090753880,"sku":"PID1670","price":49.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_entrainement-double-inox-pour-ultra-sc.jpg?v=1775217426"},{"product_id":"plateau-vitroceramique-magnetique-sh65","title":"Magnetic ceramic hob SH65","description":"\u003cp style=\"text-align: justify;\"\u003eThe SH65 magnetic ceramic glass print bed is a spare part for Volumic SH65 3D printers and their IDRE and Performance variations. It is made of a ceramic glass material that combines the flatness of a glass surface with the thermal resistance of technical ceramic.\u003cbr\u003e\u003cbr\u003eIts magnetic attachment allows for direct installation and removal from the printer's cradle, without screws or special tools, which simplifies maintenance in a production environment.\u003c\/p\u003e\n\u003ch2\u003ePrinting behavior\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe ceramic glass surface offers controlled flatness across the entire printing area, a necessary condition for the regularity of the first layer in FDM.\u003cbr\u003e\u003cbr\u003eThe material withstands repeated temperature cycles and maintains its geometry over time, making it a proven solution for repeated print runs in prototyping workshops as well as in production.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation is done by simply placing the bed on the machine's magnetic cradle. No additional mechanical fastening system is required: the hold is ensured by integrated magnets. This design allows for quick replacement in case of wear and tear and allows for flat cleaning of the print bed off the machine if necessary.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eRigid replacement print bed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eCeramic glass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAttachment\u003c\/th\u003e\n\n\u003ctd\u003eMagnetic, without screws or tools\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFormat\u003c\/th\u003e\n\n\u003ctd\u003eSpecific to SH65 print volume\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003ePID4295\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic SH65 series 3D printers\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65 IDRE\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65 Performance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831091048792,"sku":"PID4295","price":179.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_plateau-vitroceramique-magnetique-sh65.jpg?v=1775242581"},{"product_id":"conduit-de-ventilation-extrudeur-sh65-exo42-blowerduct","title":"SH65\/EXO42 Extruder Ventilation Duct (Blowerduct)","description":"\u003cp style=\"text-align: justify;\"\u003eThe SH65\/EXO42 extruder ventilation duct, also known as a blowerduct, is a spare part that channels the airflow from the cooling fan towards the part being printed. Installed on the Volumic print head, it directs the air exiting the blower as close as possible to the nozzle to ensure controlled cooling of the freshly deposited layer.\u003c\/p\u003e\n\u003ch2\u003eRole in print quality\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe quality of the layer cooling at the nozzle exit directly affects the rendering of bridges, overhangs, and fine details in FDM printing.\u003cbr\u003e\u003cbr\u003eA duct with geometry degraded by heat, cracked, or poorly positioned leads to air dispersion and visible defects on the finished part. Replacing it with the original part restores the flow geometry intended by the manufacturer and the regularity of the cooling.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe duct is mounted in the dedicated slot on the print head, at the outlet of the radial fan. The operation does not require major disassembly of the machine and is part of a preventive maintenance logic for printers in intensive workshop or production use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eExtruder ventilation duct (blowerduct)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eChanneling airflow from the radial fan to the printing area\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePosition\u003c\/th\u003e\n\n\u003ctd\u003ePrint head, at the blower outlet\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eType of intervention\u003c\/th\u003e\n\n\u003ctd\u003eSpare part, preventive or corrective maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003ePID4467\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic SH65 3D printers\u003c\/li\u003e\n\n  \u003cli\u003eVolumic EXO42 3D printers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831091343704,"sku":"PID4467","price":19.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_conduit-de-ventilation-extrudeur-sh65exo42-blowerduct-2-1.jpg?v=1775242578"},{"product_id":"moteur-x-et-y-pour-ultra-sc-mk3-sc2-sh65-exo42","title":"Engine X and Y for ULTRA\/SC\/MK3\/SC2\/SH65\/EXO42","description":"\u003cp style=\"text-align: justify;\"\u003eThe X and Y motor is a replacement stepper motor designed to drive the horizontal axes of Volumic 3D printers. Identical for both axes, it ensures the movement of the print head in the XY plane via the machine's belt transmission system.\u003cbr\u003e\u003cbr\u003eA single reference covers the entire Stream and EXO range in their recent versions, simplifying the management of spare parts inventory in multi-machine parks.\u003c\/p\u003e\n\u003ch2\u003eIdentification and compatibility precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe part has a distinctive notch on the motor body, which allows it to be identified compared to previous generations. This notch is the indicator to check before any replacement.\u003cbr\u003e\u003cbr\u003eMotors from the first MK1 and MK2 series without this notch are not compatible with this model. In case of doubt about the installed version, or for replacement on a v1 motor without a notch, prior contact with a Volumic advisor is required.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eStepper Motor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003eX and Y Axis Drive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIdentification Mark\u003c\/th\u003e\n\n\u003ctd\u003eNotch on the motor body\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003ePRO1501\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream and EXO range 3D printers (revisions equipped with the identification notch)\u003c\/li\u003e\n\n  \u003cli\u003eStream30 Ultra\u003c\/li\u003e\n\n  \u003cli\u003eStream30 Pro MK3\u003c\/li\u003e\n\n  \u003cli\u003eStream30 SC, Stream30 SC2, Stream30 SC2 Performance\u003c\/li\u003e\n\n  \u003cli\u003eStream20 and Stream30 Pro MK2 (latest generations only, with notch present)\u003c\/li\u003e\n\n  \u003cli\u003eSH65, SH65 IDRE, SH65 Performance\u003c\/li\u003e\n\n  \u003cli\u003eEXO42, EXO42 IDRE, EXO42 Performance\u003c\/li\u003e\n\n  \u003cli\u003eEXO65, EXO65 IDRE, EXO65 Performance\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with v1 motors without a notch (MK1 and early MK2 series)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56831091507544,"sku":"PRO1501","price":37.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_moteur-x-et-y-pour-ultrascmk3sc2sh65exo42.jpg?v=1775231797"},{"product_id":"filtre-particule-pour-capot-stream-ultra-v2","title":"STREAM ULTRA v2 bonnet particulate filter","description":"\u003cp\u003e Particulate filter for STREAM ULTRA v2\u003c\/p\u003e\n\u003cp\u003e Compatible only with STREAM ULTRA ABEK v2 covers\u003c\/p\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893862674776,"sku":"ACC1815","price":12.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_732-Filtre-particule-pour-capot-STREAM-ULTRA-v2.jpg?v=1775210205"},{"product_id":"devidoir-central-complet","title":"Complete central reel","description":"\u003cp style=\"text-align: justify;\"\u003eThe complete small central spool holder is a filament spool support designed for Volumic 3D printers. Designed for spools weighing less than 1.5 kg, it is installed in a central position on the machine and offers a direct path for the filament to the print head.\u003cbr\u003e\u003cbr\u003eThe assembly is delivered ready to mount, with all the mechanical elements necessary for its immediate use in a prototyping or production workshop.\u003c\/p\u003e\n\u003ch2\u003eKit composition\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe kit includes the central shaft, the clamping nut, the drive rotors, the filament guide tubes, and the side stop.\u003cbr\u003e\u003cbr\u003eThe rotors ensure free rotation of the spool under the traction exerted by the extruder, without excessive mechanical stress on the filament. The stop maintains the axial positioning of the spool and prevents any wobbling during printing.\u003c\/p\u003e\n\u003ch2\u003eSetup and use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eMounting is carried out on the machine's designated central location. The filament path goes through the included guide tubes, which protect the consumable from friction and limit the risk of snagging during printing. The compact format is suitable for small volume spools used in material testing, settings validation, or short-run production.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eType\u003c\/th\u003e\n\n\u003ctd\u003eCentral filament spool holder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFormat\u003c\/th\u003e\n\n\u003ctd\u003eSmall model\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCompatible spools\u003c\/th\u003e\n\n\u003ctd\u003eWeight under 1.5 kg\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMounting position\u003c\/th\u003e\n\n\u003ctd\u003eCentral on the machine\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eIncluded elements\u003c\/th\u003e\n\n\u003ctd\u003eShaft, nut, rotors, filament guide tubes, stop\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eACC4474\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic 3D printers equipped with a central spool holder slot\u003c\/li\u003e\n\n  \u003cli\u003eFilament spools weighing less than 1.5 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863035224,"sku":"ACC4474","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/devidoir-central-complet-petit-3.jpg?v=1779311440"},{"product_id":"plateau-pei-magnetique-ultem-texture-exo42","title":"EXO42 Textured Magnetic PEI (ULTEM) Deck","description":"Steel sheet tray with textured PEI coating on both sides.\u003cbr\u003e\n Note: May require shorter Z-endstop blades.\u003cbr\u003e\n\u003cbr\u003e\n The advantages of the platform:\u003cbr\u003e\n - Quick installation\u003cbr\u003e\n - An ultra-resistant tray\u003cbr\u003e\n - A textured surface\u003cbr\u003e\n - Excellent adhesion\u003cbr\u003e\n - Simplified coin removal\u003cbr\u003e\r \n- A reversible tray\u003cbr\u003e\n - A very simple interview\u003cbr\u003e\n - A flexible tray\u003cbr\u003e\n\u003cbr\u003e\n Compatible with Volumic 3D printers that have a magnetic build plate","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863821656,"sku":"ACC6049","price":108.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-pei-magnetique-ultem-texture-exo42-3.jpg?v=1779314569"},{"product_id":"plateau-pei-magnetique-ultem-texture-vs30-sc2-mk3","title":"Textured magnetic PEI (ULTEM) playfield VS30 (SC2\/MK3)","description":"Steel sheet tray with textured PEI coating on both sides.\u003cbr\u003e\n Note: May require shorter Z-endstop blades.\u003cbr\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n Compatible with Volumic 3D printers that have a magnetic build plate","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863887192,"sku":"ACC6071","price":67.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-pei-magnetique-ultem-texture-vs30-sc2mk3-3.jpg?v=1779284247"},{"product_id":"filtre-a-particules-pour-capot-stream","title":"STREAM bonnet particulate filter","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM Hood Particle Filter is a replacement HEPA filter specifically designed for the hoods of Volumic FDM printers in the Stream series. It is installed in the filtration system integrated into the hood and retains fine particles generated during printing (molten filament microparticles, dust, and suspended residue in the heated enclosure).\u003cbr\u003e\u003cbr\u003eIts periodic replacement ensures the quality of the air discharged from the enclosure and maintains the performance of the filtration system: it is part of a preventive maintenance approach suited to professional environments where emission control is an installation criterion (design offices, workshops, laboratories, professional fab labs).\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement frequency depends on printer usage, the type of filaments used, and the observed clogging of the existing filter. The operation is performed with the hood open, the machine turned off and cooled, by accessing the filtration housing provided on the Stream hood. The used filter must be handled with appropriate PPE (gloves, mask) and disposed of in accordance with the rules applicable to industrial waste containing fine particles.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eReplacement HEPA Particle Filter\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacturer Reference\u003c\/th\u003e\n\n\u003ctd\u003eACC896\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTarget Equipment\u003c\/th\u003e\n\n\u003ctd\u003eVolumic Stream FDM Printer Hood\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFiltration Technology\u003c\/th\u003e\n\n\u003ctd\u003eHEPA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eRetention of fine particles emitted during printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ Maintenance consumable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series printer hoods\u003c\/li\u003e\n\n  \u003cli\u003eCompatible with Stream VS20, VS30, MK1 and MK2 hoods\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893863952728,"sku":"ACC896","price":81.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/filtre-a-particules-pour-capot-stream-3.jpg?v=1779347852"},{"product_id":"capteur-de-chauffe-mk2-v2-cartouche","title":"MK2 v2 heating sensor (cartridge)","description":"Heat sensor v2 for STREAM series. (cartridge version)\u003cbr\u003e\n\u003cbr\u003e\n - 1 sensor\u003cbr\u003e\n\u003cbr\u003e\n - 1 cable","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893865361752,"sku":"PID815","price":9.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_capteur-de-chauffe-mk2-v2-cartouche.jpg?v=1775217405"},{"product_id":"microswitch-de-butee-x-y-z-endstop","title":"X\/Y\/Z endstop microswitch","description":"\u003cp style=\"text-align: justify;\"\u003eThe X\/Y\/Z Endstop Microswitch is a replacement mechanical limit switch for Volumic Stream series FDM printers. It is used on the X, Y and Z axes and is the reference part used by the machine for its machine origin (homing) at the start of each print: the mechanical contact of the microswitch signals the control board the zero position of the corresponding axis.\u003cbr\u003e\u003cbr\u003eThis spare part allows you to replace a faulty endstop, one that triggers inadvertently, has a loose connection or a position return defect, without having to intervene on the entire machine harness.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe microswitch is supplied bare, for soldering: its integration requires the dismantling of the faulty component, the desoldering of its connections and the resoldering of the new component onto the same tracks. The operation must be carried out with the machine switched off, by an operator with fine electronic soldering skills. A homing test on all three axes must be carried out after reassembly to validate the correct triggering of the sensor and the consistency of the zero position with the machine's software references.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eLimit switch microswitch (mechanical endstop)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacturer Reference\u003c\/th\u003e\n\n\u003ctd\u003ePID1019\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAffected Axes\u003c\/th\u003e\n\n\u003ctd\u003eX, Y and Z\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eConnection Type\u003c\/th\u003e\n\n\u003ctd\u003eTo be soldered (bare component)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eZero position detection for axis homing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series printers\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 Pro MK1 and Stream 20 Pro MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 Pro MK1 and Stream 30 Pro MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 Dual MK1 and Stream 20 Dual MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 Dual MK1 and Stream 30 Dual MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 Ultra\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 SC\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874372952,"sku":"PID1019","price":5.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_microswitch-de-butee-xyz-endstop-1_d1b08804-5864-400f-a22b-6d35425e7c47.jpg?v=1775220970"},{"product_id":"blower-stream-series","title":"Blower STREAM Series","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM Series Blower is the radial cooling fan spare part dedicated to Volumic FDM printers. Its function is to blow an oriented airflow onto the part being printed, immediately after filament deposition, to quickly solidify the material and improve the quality of bridges, overhangs and fine details.\u003cbr\u003e\u003cbr\u003eThis reference meets the mechanical and electrical specifications of the blower installed ex-factory on all Stream, SH and EXO series, as well as on the IDRE and Performance variants, ensuring a flow rate, connector, and thermal signature compliant with the calibration profile of Volumic firmwares.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eInstallation is done on the extruder shroud designed for this purpose, with connection to the corresponding connector on the machine's electronic board. Replacement requires partial disassembly of the extrusion carriage; Volumic provides online technical support, to be consulted according to the printer model, to ensure correct reassembly and preserve the fan's PWM regulation as well as the correct positioning of the airflow relative to the nozzle.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eRadial cooling fan part (blower)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eManufacturer Reference\u003c\/th\u003e\n\n\u003ctd\u003ePID1020\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eCooling of freshly extruded filament\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\n\u003ctd\u003e1 fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream, SH and EXO series printers (Standard and Plus versions)\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 Pro MK1, MK2 and Stream 30 Pro MK1, MK2, MK3\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 Dual MK1, MK2 and Stream 30 Dual MK1, MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 Ultra\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 SC and Stream 30 SC2 (Standard and Performance versions)\u003c\/li\u003e\n\n  \u003cli\u003eSH65 and SH65 IDRE\u003c\/li\u003e\n\n  \u003cli\u003eEXO42 and EXO42 IDRE\u003c\/li\u003e\n\n  \u003cli\u003eEXO65 and EXO65 IDRE\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874438488,"sku":"PID1020","price":35.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_blower-stream-series-2.jpg?v=1775231776"},{"product_id":"bloc-de-chauffe-complet-stream-mk2","title":"STREAM MK2 complete heating block","description":"\u003cp style=\"text-align: justify;\"\u003eThe complete STREAM MK2 heating block is a replacement part for Volumic STREAM MK2 series FDM 3D printers. The assembly includes the heating cartridge, the thermal sensor, and a cable with a quick-change connector to facilitate maintenance operations on the print head.\u003cbr\u003e\u003cbr\u003eDelivered without a nozzle or thermal barrier, this block allows only the heating part to be replaced while retaining the compatible components already present on the printer. Its interchangeable design facilitates interventions in production or prototyping environments requiring quick resumption of service.\u003c\/p\u003e \u003ch2\u003eMaintenance and Implementation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eReplacing the heating block requires careful handling of the thermal barrier and heating cables to avoid any deformation or breakage related to high thermal cycles. After intervention, a PID recalibration of the print head is recommended to maintain stable thermal regulation and limit the risks of under-extrusion or temperature variations.\u003cbr\u003e\u003cbr\u003eThis component is designed for the high-temperature extrusion systems of STREAM MK2 machines, compatible with many technical thermoplastics used in professional additive manufacturing.\u003c\/p\u003e \u003ch2\u003eMachine Compatibility\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe heating block is designed for Volumic STREAM MK2 interchangeable print heads. It integrates with compatible single or dual extrusion configurations of the range, with the original quick connection system. The use of suitable and correctly assembled components helps to preserve the extrusion quality and thermal stability of the entire hotend.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eComplete heating block\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eItems included\u003c\/th\u003e\n\n\u003ctd\u003eHeating cartridge, thermal sensor, cable with quick connector\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eItems not included\u003c\/th\u003e\n\n\u003ctd\u003eNozzle, thermal barrier\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eConnection system\u003c\/th\u003e\n\n\u003ctd\u003eQuick-change connector\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMounting\u003c\/th\u003e\n\n\u003ctd\u003eSTREAM MK2 interchangeable head\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eExtrusion compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSingle and dual extrusion depending on machine\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003ePID1025\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic STREAM MK2 FDM 3D printers\u003c\/li\u003e \u003cli\u003eCompatible with Volumic STREAM 20 PRO MK2\u003c\/li\u003e \u003cli\u003eCompatible with Volumic STREAM 30 PRO MK2\u003c\/li\u003e \u003cli\u003eCompatible with Volumic STREAM 20 DUAL MK2\u003c\/li\u003e \u003cli\u003eCompatible with Volumic STREAM 30 DUAL MK2\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874504024,"sku":"PID1025","price":96.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/bloc-de-chauffe-complet-stream-mk2-3.jpg?v=1779366775"},{"product_id":"plateau-vitroceramique-stream30-ultra-sc","title":"Ceramic hob STREAM30 ULTRA\/SC","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM 30 UltraSC ceramic glass plate is a print bed designed for Volumic STREAM 30 series FDM 3D printers. Its ceramic glass surface ensures homogeneous heat distribution across the entire print area to limit temperature variations during manufacturing cycles.\u003cbr\u003e\u003cbr\u003eDesigned for professional and intensive use, this plate helps improve first layer adhesion while facilitating part removal after cooling. It integrates as an original replacement part on compatible STREAM series systems.\u003c\/p\u003e \u003ch2\u003eThermal behavior\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe ceramic glass surface exhibits good dimensional stability during the heated bed's temperature increases. This characteristic allows maintaining a flatness suitable for prints requiring a regular first layer, especially with materials sensitive to shrinkage or warping.\u003cbr\u003e\u003cbr\u003eThe plate can be used with different adhesion supports depending on the polymers used and production constraints. Regular cleaning of the surface is recommended to preserve adhesion performance and print repeatability.\u003c\/p\u003e \u003ch2\u003eMaintenance and integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis spare part is intended to replace the original plate on compatible STREAM 30 UltraSC printers. Installation must be carried out on a machine that is switched off, with verification of the plate's leveling and parallelism after installation to ensure homogeneous extrusion across the entire print surface.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eCeramic glass plate\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eCeramic glass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrint surface for heated bed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eVolumic STREAM 30 UltraSC\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eSTREAM 30 series compatible\u003c\/li\u003e \u003cli\u003eVolumic STREAM 30 UltraSC compatible\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874733400,"sku":"PID1036","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_plateau-vitroceramique-stream30-ultrasc.jpg?v=1775210191"},{"product_id":"barriere-thermique-ultra-sc-mk3","title":"Gen4 Thermal Barrier (ULTRA\/SC\/SC2\/MK3\/SH\/EXO)","description":"\u003cp style=\"text-align: justify;\"\u003eThis Gen4 titanium heat break is a spare part for the printheads of Volumic's STREAM ULTRA, SC, SC2, MK3, SH65, and EXO42 ranges. Designed to limit heat transfer between the hotend block and the extrusion system, it contributes to temperature stability during long or high-flow prints.\u003cbr\u003e\u003cbr\u003eIts titanium design reduces thermal transfer in the cold zone of the printhead, limiting the risk of premature filament softening and clogging phenomena related to heat creep.\u003c\/p\u003e \u003ch2\u003eIntegration and maintenance\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part integrates into compatible extrusion assemblies from the Volumic Gen4 range. It is suitable for preventive maintenance or replacement operations on professional FDM printers used for prototyping, small batch production, or continuous manufacturing.\u003cbr\u003e\u003cbr\u003eAlso compatible with certain older generations of MK2 machines, this heat break is suitable for environments requiring controlled thermal regularity and stable extrusion continuity with technical materials.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eHeat break\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eGeneration\u003c\/th\u003e\n\n\u003ctd\u003eGen4\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eTitanium\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrinthead thermal insulation\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSTREAM ULTRA, SC, SC2, MK3, SH65, EXO42\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eAdditional compatibility\u003c\/th\u003e\n\n\u003ctd\u003eAlso compatible with MK2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement of FDM printheads\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D printers equipped with a Gen4 compatible head\u003c\/li\u003e \u003cli\u003eSTREAM30 ULTRA compatible\u003c\/li\u003e \u003cli\u003eSTREAM30 ULTRA SUPERCHARGED compatible\u003c\/li\u003e \u003cli\u003eSTREAM30 ULTRA SUPERCHARGED 2 compatible\u003c\/li\u003e \u003cli\u003eSTREAM20 \u0026amp; 30 PRO MK1 compatible\u003c\/li\u003e \u003cli\u003eSTREAM20 \u0026amp; 30 PRO MK2 compatible\u003c\/li\u003e \u003cli\u003eSTREAM30 PRO MK3 compatible\u003c\/li\u003e \u003cli\u003eSH65 compatible\u003c\/li\u003e \u003cli\u003eEXO42 compatible\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874766168,"sku":"PID1049","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_barriere-thermique-ultrascmk3-2.jpg?v=1775213793"},{"product_id":"courroie-remplacement-x-ou-y-ultra-sc-mk3-sc2-100cm","title":"Replacement belt X or Y ULTRA\/SC\/MK3\/SC2 (100cm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis replacement belt for X or Y axes is designed for Volumic 3D printers from the ULTRA, SC, MK3, and SC2 series. Used in the axis movement system, it contributes to transmitting motion between the stepper motors and the mechanical guidance assemblies to ensure precision of movements during FDM printing.\u003cbr\u003e\u003cbr\u003eIts GT2 profile is suitable for kinematics requiring regular synchronization of movements and stable tension over time, particularly for extended printing cycles or high movement speeds.\u003c\/p\u003e \u003ch2\u003eMaintenance and Replacement\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis spare part is designed for preventive or corrective maintenance operations on compatible Volumic range printers. Replacing a worn belt helps limit dimensional precision losses, axis offsets, or tension variations that can affect the surface quality of printed parts.\u003cbr\u003e\u003cbr\u003eIt is suitable for professional prototyping, additive manufacturing, and intensive use environments requiring reliable drive mechanics and controlled movement repeatability.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eReplacement belt\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eBelt type\u003c\/th\u003e\n\n\u003ctd\u003eGT2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eX or Y axis motion transmission\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eLength\u003c\/th\u003e\n\n\u003ctd\u003e100 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eULTRA, SC, MK3, SC2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and mechanical replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D printers compatible with GT2\u003c\/li\u003e \u003cli\u003eCompatible with STREAM ULTRA\u003c\/li\u003e \u003cli\u003eCompatible with STREAM SC\u003c\/li\u003e \u003cli\u003eCompatible with STREAM30 PRO MK3\u003c\/li\u003e \u003cli\u003eCompatible with STREAM SC2\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874798936,"sku":"PID1053","price":13.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_courroie-remplacement-x-ou-y-ultra-gt2-9-1m.jpg?v=1775217424"},{"product_id":"entrainement-inox-mk2-ultra","title":"INOX MK2\/ULTRA Training","description":"\u003cp style=\"text-align: justify;\"\u003eThis stainless steel drive is a spare part for the extrusion systems of Volumic MK2 and ULTRA 3D printers. Integrated into the filament feeding mechanism, it ensures the transmission of the drive force between the extrusion motor and the consumable to maintain consistent extrusion during FDM printing.\u003cbr\u003e\u003cbr\u003eIts stainless steel construction provides good wear resistance in production or intensive use environments, particularly with technical or filled materials requiring higher extrusion pressure.\u003c\/p\u003e \u003ch2\u003eExtrusion Operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part directly affects the consistency of filament feed towards the heating zone. A drive in good condition helps limit adhesion losses on the filament, flow variations, or under-extrusion that can affect the dimensional quality and surface finish of printed parts.\u003cbr\u003e\u003cbr\u003eIt is suitable for preventive maintenance or replacement operations on compatible print heads from the Volumic range, in contexts of prototyping, additive manufacturing, and continuous production.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eExtrusion drive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eStainless steel\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eFilament drive\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement of extrusion system\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eMK2 and ULTRA\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eCompatible with STREAM MK2\u003c\/li\u003e \u003cli\u003eCompatible with STREAM ULTRA\u003c\/li\u003e \u003cli\u003eCompatible with relevant Volumic extrusion systems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874831704,"sku":"PID1055","price":16.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/entrainement-inox-mk2ultra-3.jpg?v=1779369638"},{"product_id":"ventilateur-tete-ultra-2x-30x10mm","title":"Dual Head Fan (ULTRA) (2x 30x10mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis dual hotend fan is designed for Volumic ULTRA 3D printers. Integrated into the print head cooling system, it ensures thermal dissipation around the heatsink and extrusion area to maintain stable operating conditions during FDM printing.\u003cbr\u003e\u003cbr\u003eControlled head cooling helps limit heat creep phenomena and variations in filament behavior in the cold zone, especially during long prints or when using technical materials sensitive to thermal variations.\u003c\/p\u003e \u003ch2\u003eThermal Management in Printing\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe dual fan system allows for continuous airflow around the print head components to maintain material flow stability and extrusion consistency. This part also contributes to maintaining the mechanical and thermal performance of the extrusion system in intensive production or prototyping environments.\u003cbr\u003e\u003cbr\u003eDesigned for maintenance or replacement operations, this assembly is compatible with ULTRA printer head configurations requiring permanent active cooling.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eDual hotend fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrint head cooling\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eULTRA range\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eSTREAM ULTRA compatible\u003c\/li\u003e \u003cli\u003eCompatible with ULTRA print head systems\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874864472,"sku":"PID1057","price":23.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/double-ventilateur-tete-ultra-3.jpg?v=1779370194"},{"product_id":"roulement-compresseur-mk2-ultra-624","title":"MK2\/ULTRA compressor bearing (624)","description":"\u003cp style=\"text-align: justify;\"\u003eThe 624ZZ bearing is a mechanical part used in various moving assemblies of FDM 3D printers, particularly for guiding, tensioning or drive systems. Equipped with metal shields on both sides, it limits the intrusion of dust and particles from the printing environment to preserve smooth rotation over time.\u003cbr\u003e\u003cbr\u003eThis type of bearing is suitable for repeated movements and mechanical stresses encountered in prototyping, additive manufacturing and continuous use on professional machines.\u003c\/p\u003e \u003ch2\u003eMechanical operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe bearing helps reduce friction on shafts and moving components to ensure regular movements and stable kinematics. A bearing in good condition helps limit mechanical play, parasitic vibrations and loss of precision that can affect the dimensional quality of printed parts.\u003cbr\u003e\u003cbr\u003eThis part is suitable for preventive maintenance or replacement operations on compatible mechanical systems requiring smooth rotation and controlled operation over extended cycles.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eMechanical bearing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003e624ZZ\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eProtection type\u003c\/th\u003e\n\n\u003ctd\u003eDouble metal shield\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eMechanical guiding and rotation\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers using 624ZZ bearings\u003c\/li\u003e \u003cli\u003eCompatible with mechanical guiding and drive systems\u003c\/li\u003e \u003cli\u003eCompatible with tensioning and axis movement assemblies\u003c\/li\u003e \u003cli\u003eCompatible with relevant Volumic equipment\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874962776,"sku":"PID1233","price":3.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_roulement-compresseur-mk2ultra-624.jpg?v=1775220978"},{"product_id":"cache-tete-stream-ultra-sc","title":"STREAM ULTRA SC Head Cover","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM ULTRA SC head cover is the replacement fairing dedicated to the extrusion head of Volumic FDM printers from the Stream Ultra SC range. It encloses the entire hotend and the head's mechanics, ensuring both the protection of internal components (electrical harness, ventilation, sensors) and the channeling of the airflow generated by the part cooling fan.\u003cbr\u003e\u003cbr\u003eThis spare part allows you to replace a damaged, cracked, or marked cover due to filament splashes, without interfering with the hotend's thermal components. The fairing also contributes to the machine's finished appearance in a series production workshop.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe cover mounts directly onto the extrusion head, with the machine turned off and the hotend cooled, according to the procedure documented by Volumic in its online technical support. The operation does not require disassembling the heating block or modifying the wiring: it is a purely mechanical replacement, within the reach of a level 1 maintenance operator. A visual inspection of the correct positioning and free airflow must be performed after reassembly.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eExtrusion head cover \/ fairing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eProtection of head components and channeling of cooling airflow\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ aesthetic and functional maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream Ultra SC series printers\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 SC\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893874995544,"sku":"PID1686","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_753-Cache-tete-STREAM-ULTRA-v2.jpg?v=1775228207"},{"product_id":"ventilateur-tete-ultra-sc-mk3-sc2-s","title":"ULTRA SC\/MK3\/SC2\/S Fan Head","description":"\u003cp style=\"text-align: justify;\"\u003eThis hotend fan is designed for Volumic 3D printers from the SC, MK3, SC2, SH65, and EXO42 ranges. Integrated into the printhead's cooling system, it ensures the necessary heat dissipation to maintain a stable cold zone during FDM printing cycles.\u003cbr\u003e\u003cbr\u003eContinuous cooling of the hotend helps limit heat creep phenomena in the extrusion conduit, which can cause flow variations, clogs, or inconsistencies when printing technical materials.\u003c\/p\u003e \u003ch2\u003eThermal Management and Maintenance\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis part contributes to maintaining the performance of the extrusion system by ensuring constant airflow around the heat sink. A functional fan helps preserve the stability of extrusion and the behavior of the filament in additive manufacturing, prototyping, and intensive use environments.\u003cbr\u003e\u003cbr\u003eDesigned for preventive maintenance or replacement operations, this fan is compatible with several generations of Volumic hotends used on the brand's professional platforms.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eHotend Fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrinthead Cooling\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and Replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSC, MK3, SC2, SH65, EXO42\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible Technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D Printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D Printers\u003c\/li\u003e \u003cli\u003eCompatible with STREAM SC\u003c\/li\u003e \u003cli\u003eCompatible with STREAM30 PRO MK3\u003c\/li\u003e \u003cli\u003eCompatible with STREAM SC2\u003c\/li\u003e \u003cli\u003eCompatible with SH65\u003c\/li\u003e \u003cli\u003eCompatible with EXO42\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875028312,"sku":"PID1699","price":11.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_ventilateur-tete-ultra-scmk3sc2sh65exo42-gauchedroite-2.jpg?v=1775235398"},{"product_id":"ventilateur-tete-ultra-sc-droit-5cm","title":"ULTRA SC right-angle fan head (5cm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis 5 cm right print head fan is a spare part designed for Volumic Ultra SC 3D printers. It ensures the cooling of the extrusion head to maintain a stable temperature at the heatsink and limit the risk of overheating during long or high-temperature printing phases.\u003cbr\u003e\u003cbr\u003eMaintaining a constant airflow also contributes to the regularity of extrusion for technical materials sensitive to thermal creep or cold zone clogging. This part is designed to replace a worn, damaged, or underperforming original fan.\u003c\/p\u003e \u003ch2\u003ePrint head cooling\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eHead cooling plays an essential role in the operation of high-temperature FDM systems. A defective fan can cause thermal variations, filament jams, or safety errors related to extruder overheating.\u003cbr\u003e\u003cbr\u003eThis model is suitable for preventive or corrective maintenance on compatible Volumic machines. Its compact format facilitates integration into the head assembly without modifying the original cooling system.\u003c\/p\u003e \u003ch2\u003eMaintenance and replacement\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe fan replacement must be carried out with the machine powered off, checking the condition of the wiring and the absence of dust or polymer residue accumulation in the ventilation area. Controlled air circulation helps preserve the thermal performance of the print head and the stability of prints over extended cycles.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003ePrint head fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMounting\u003c\/th\u003e\n\n\u003ctd\u003eRight\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSize\u003c\/th\u003e\n\n\u003ctd\u003e5 cm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eExtrusion head cooling\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eManufacturer compatibility\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D Printers\u003c\/li\u003e \u003cli\u003eCompatible with Volumic Ultra SC series\u003c\/li\u003e \u003cli\u003eCompatible with Volumic print heads with 5 cm right fan\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875093848,"sku":"PID1700","price":11.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ventilateur-tete-ultra-sc-droit-5cm-3.jpg?v=1779371581"},{"product_id":"kit-pieces-plastiques-extrudeur-ultra-v2","title":"ULTRA v2 extruder plastic parts kit","description":"\u003cp style=\"text-align: justify;\"\u003eThis plastic parts kit for the Ultra V2 extruder is intended for the replacement or refurbishment of the structural elements of the extruder on compatible Volumic 3D printers. It includes the polymer components that ensure mechanical support, guiding, and stability of the filament drive assembly within the FDM extrusion system.\u003cbr\u003e\u003cbr\u003eThese parts are used as part of preventive or corrective maintenance to restore original assembly tolerances and ensure stable extrusion operation over extended cycles.\u003c\/p\u003e \u003ch2\u003eRole in the extrusion system\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe extruder is a critical component in the filament feeding chain. The plastic parts of the kit contribute to filament alignment, bearing support, and overall assembly rigidity. Wear or deformation can lead to flow variations, underextrusion, or loss of inter-layer adhesion.\u003cbr\u003e\u003cbr\u003eReplacing these elements allows for restoration of operation in accordance with the mechanical tolerances specified by the manufacturer for professional printing environments.\u003c\/p\u003e \u003ch2\u003eMaintenance and refurbishment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe kit is intended for maintenance operations on Ultra V2 extruders. Its use generally occurs during a complete disassembly of the drive assembly, in cases of mechanical wear, cracking, or loss of rigidity of the polymer parts.\u003cbr\u003e\u003cbr\u003eRegular inspection of the extruder helps maintain stable filament feeding, especially for long prints or technical materials requiring constant extrusion force.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003ePlastic parts kit for extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSystem concerned\u003c\/th\u003e\n\n\u003ctd\u003eUltra V2 Extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eMechanical support and filament guiding\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eAvailable materials\u003c\/th\u003e\n\n\u003ctd\u003eTechnical polymers (depending on version)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eVariants\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several colors and diameters depending on configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eSystems equipped with Ultra V2 extruder\u003c\/li\u003e \u003cli\u003eVolumic machines of Ultra compatible generation\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875224920,"sku":"PID3298","price":79.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/kit-pieces-plastiques-extrudeur-ultra-v2-3.jpg?v=1779371902"},{"product_id":"ventilateur-tete-mk2-30x10mm","title":"MK2 Head Fan (30x10mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThis 30×10 mm MK2 head fan is a replacement part for Volumic 3D printing systems equipped with a compatible extrusion head. It ensures cooling of the hot zone and the heat sink to stabilize filament behavior during FDM extrusion.\u003cbr\u003e\u003cbr\u003eEfficient head cooling helps limit heat creep phenomena in the heatbreak and contributes to consistent material flow, especially during long prints or with technical materials sensitive to temperature variations.\u003c\/p\u003e \u003ch2\u003eThermal Management of the Extrusion Head\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe head fan plays a central role in the thermal stability of the extruder. Insufficient or irregular airflow can lead to feeding defects, partial clogging, or variations in polymer viscosity in the solid\/liquid transition zone.\u003cbr\u003e\u003cbr\u003eThis type of component is used for preventive or corrective maintenance to maintain constant thermal conditions and preserve print quality during repetitive production cycles.\u003c\/p\u003e \u003ch2\u003eMaintenance and Replacement\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eFan replacement must be carried out with the power off, checking for any obstruction of the air ducts and the condition of the mechanical fasteners. An accumulation of dust or polymer residues can significantly reduce cooling efficiency.\u003cbr\u003e\u003cbr\u003eRegular maintenance of the ventilation system helps to extend the life of the print head and maintain stable extrusion across different types of materials.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eExtrusion head fan\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSize\u003c\/th\u003e\n\n\u003ctd\u003e30 × 10 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003ePrint head cooling\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eTechnology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eVariants\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several colors and diameters depending on configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D printers\u003c\/li\u003e \u003cli\u003ePrint heads equipped with MK2 fan\u003c\/li\u003e \u003cli\u003eVolumic systems compatible with MK2 generation\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893875257688,"sku":"PID3305","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ventilateur-tete-mk2-30x10mm-3_78c77413-0905-445d-b1d9-0c52ab76733a.jpg?v=1779372310"},{"product_id":"pate-thermique","title":"Thermal paste","description":"\u003cp style=\"text-align: justify;\"\u003eThermal paste is an interface material designed to improve heat transfer between two imperfectly contacting solid surfaces, typically between a heating element and a heat sink. In the context of professional 3D printing, it is used on hotend assemblies, heating blocks, sensors, or electronic components to reduce thermal resistance and ensure more homogeneous heat dissipation. Its formulation is optimized to guarantee good thermal conductivity while maintaining stable application in a thin layer.\u003c\/p\u003e \u003ch2\u003eImplementation and Applications\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe application is carried out in a very thin layer on clean and degreased surfaces, before mechanical assembly of the elements. A limited amount is sufficient to avoid any excess that could disrupt thermal contact. This type of paste is commonly used on FDM 3D printer extrusion assemblies, but also on embedded electronic systems or heat sinks requiring controlled thermal evacuation. Several packaging options, colors, and formats may exist depending on the series and industrial uses.\u003c\/p\u003e \u003ch2\u003eStorage and Precautions\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe product must be stored in its original packaging, sealed after use, to prevent any contamination by dust or drying out. Storage at room temperature, away from direct heat and extreme variations, helps preserve its application properties. When handling, contact with optical surfaces or areas not concerned with heat dissipation should be avoided.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eThermal paste (thermal conductive interface)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003eThermal interfaces for electronic components and 3D printing systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003eVariable depending on version (not specified)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eColor\u003c\/th\u003e\n\n\u003ctd\u003eMay vary depending on references\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers of all brands\u003c\/li\u003e \u003cli\u003eHotend assemblies and heating blocks\u003c\/li\u003e \u003cli\u003eHeat sinks for industrial electronics\u003c\/li\u003e \u003cli\u003eElectronic boards and power modules\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877715288,"sku":"PID3546","price":4.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_11_pate-thermique_ad47902f-697d-469e-9bb2-49701d68c111.jpg?v=1775242603"},{"product_id":"kit-maintenance-extrudeur-ultra","title":"ULTRA Extruder maintenance kit","description":"\u003cp style=\"text-align: justify;\"\u003eThe Ultra extruder maintenance kit is a set of parts designed for the maintenance and refurbishment of extrusion systems used in FDM 3D printing. It brings together the wear and adjustment elements necessary to maintain the mechanical and thermal performance of the extruder, particularly in a context of intensive use in a professional environment. This type of kit is used to restore material feeding conditions, limit extrusion irregularities, and ensure production continuity on machines used in workshops or for series production.\u003cbr\u003e\u003cbr\u003eIts design is oriented towards rapid intervention on critical areas of the extruder, in order to reduce machine downtime during preventive or corrective maintenance operations. It helps maintain stable operation of the filament drive and guide system, by limiting phenomena of under-extrusion or blockage linked to the wear of internal components.\u003c\/p\u003e \u003ch2\u003eExtrusion Maintenance and Refurbishment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis kit is part of a maintenance approach for Ultra-type extruders, replacing elements subject to friction or thermal stress. The intervention restores extrusion conditions in accordance with the machine's original specifications, particularly on continuously used FDM systems. It is intended for planned maintenance operations as well as corrective interventions in the event of material flow deviation or degradation of feeding regularity.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003e3D Extruder Maintenance Kit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and refurbishment of FDM extrusion systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSystem Concerned\u003c\/th\u003e\n\n\u003ctd\u003eUltra Extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003ePreventive and corrective maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eContents\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance elements (composition variable depending on version)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProfessional FDM 3D printers\u003c\/li\u003e \u003cli\u003eUltra-type extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic 3D production machines equipped with an Ultra extruder\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877748056,"sku":"PID3557","price":82.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_03_kit-maintenance-extrudeur-ultra.jpg?v=1775228178"},{"product_id":"kit-maintenance-extrudeur-mk2","title":"MK2 Extruder Maintenance Kit","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK2 Extruder Maintenance Kit is a set of parts designed for the maintenance and replacement of wear components in the extrusion system of FDM 3D printers equipped with an MK2 generation extruder. It helps restore the mechanical and thermal conditions necessary for stable filament feeding, limiting material flow variations related to the wear of internal components. This type of kit is used in professional environments to maintain production continuity and reduce extrusion drifts on machines subjected to intensive use.\u003cbr\u003e\u003cbr\u003eDesigned for structured maintenance, it facilitates the replacement of critical extruder parts without modifying the overall system. The objective is to restore operation to the original tolerances of the drive assembly, ensuring a regular filament feed and better repeatability of prints over long cycles.\u003c\/p\u003e \u003ch2\u003eExtrusion Maintenance and Restoration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis kit is part of a preventive or corrective maintenance approach for MK2 extruders used on professional 3D printing platforms. It is intended for the replacement of elements subjected to friction and thermal stresses, helping to limit underextrusion, slipping, or material flow variation phenomena. The assembly stabilizes the behavior of the filament feeding system and extends the service life of the extruder in a continuous production context.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003e3D Extruder Maintenance Kit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and restoration of FDM extrusion systems\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSystem Concerned\u003c\/th\u003e\n\n\u003ctd\u003eMK2 Extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003ePreventive and corrective maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eContents\u003c\/th\u003e\n\n\u003ctd\u003eReplacement elements for extruder (composition varies by version)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eVariants\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several configurations, colors, and diameters depending on references\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProfessional FDM 3D printers\u003c\/li\u003e \u003cli\u003eMK2 type extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic 3D printing equipment compatible with MK2 extruder\u003c\/li\u003e \u003cli\u003ePrototyping and production platforms in technical workshops\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877780824,"sku":"PID3558","price":57.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_10_kit-maintenance-extrudeur-mk2-1.jpg?v=1775224569"},{"product_id":"kit-maintenance-extrudeur-pour-tete-compatibilite","title":"Extruder maintenance kit for compatible head","description":"\u003cp style=\"text-align: justify;\"\u003eThe StandardPlus printhead extruder maintenance kit includes a set of parts for the preventive and corrective maintenance of the extruder on Volumic 3D printing systems equipped with this architecture. It allows for the replacement of wear parts to maintain stable extrusion and limit flow deviations, under-extrusions, or material feeding defects. Designed for use in a professional environment, it is integrated into the regular maintenance operations of FDM machines, in a logic of production continuity and reduction of machine downtime.\u003c\/p\u003e \u003ch2\u003eFunction and implementation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThis kit is used during maintenance operations of the StandardPlus extrusion head to restore the original performance of the feeding system. The intervention generally consists of replacing components subject to mechanical or thermal wear, then checking the proper functioning of the extrusion after reassembly. A flow calibration may be necessary depending on the initial state of the head and its usage history.\u003c\/p\u003e \u003ch2\u003eMaintenance and production continuity\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eIn a production context, anticipating the replacement of extrusion elements helps limit unplanned machine shutdowns and stabilize the quality of produced parts. The kit is part of a managed maintenance approach for professional 3D printing equipment. Depending on machine configurations, consumables associated with the printing ecosystem may be available in several diameters and colors, without impacting the compatibility of the StandardPlus head.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eExtruder maintenance kit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eReplacement of wear parts of the extrusion head\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003ePreventive and corrective maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\n\u003ctd\u003eVolumic StandardPlus head\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003eSpare parts kit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProfessional FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic machines equipped with StandardPlus extrusion head\u003c\/li\u003e \u003cli\u003eIndustrial 3D printing systems from the Volumic ecosystem\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877813592,"sku":"PID3559","price":109.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_03_kit-maintenance-extrudeur-pour-tete-compatibilite.jpg?v=1775224586"},{"product_id":"plateau-vitroceramique-stream20","title":"STREAM20 ceramic hob","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM Vitroceramic Plate is the replacement print surface for first and second generation (MK1 and MK2) Volumic FDM printers from the Stream series, in both Pro and Dual configurations. Made of vitroceramic, it combines high flatness, low expansion coefficient, and mechanical resistance to heat, three sought-after characteristics for the adhesion zone of an industrial FDM printer.\u003cbr\u003e\u003cbr\u003eVitroceramic offers a stable surface over time: it maintains its reference geometry (probing homogeneity, first layer flatness) even after numerous thermal cycles, a necessary condition for reproducibility in series production.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe plate mounts on the machine's original heated bed, following the procedure documented by Volumic in its online technical support. Once in place, it directly accommodates FDM filaments compatible with deposition on vitroceramic: an additional adhesive such as 3DLac spray can be applied to adjust adhesion depending on the material being printed. Routine maintenance is carried out with IPA, when the plate is cold, to degrease the surface between two prints and restore first layer adhesion.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003ePrint bed (surface)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eVitroceramic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSizes available in the range\u003c\/th\u003e\n\n\u003ctd\u003eSeveral formats offered depending on the printer model\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFeatures\u003c\/th\u003e\n\n\u003ctd\u003eHigh flatness, low expansion coefficient, good resistance to thermal cycles\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ print surface\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series first and second generation printers\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 PRO MK1 and Stream 20 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 PRO MK1 and Stream 30 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 DUAL MK1 and Stream 20 DUAL MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 DUAL MK1 and Stream 30 DUAL MK2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877911896,"sku":"PID375","price":36.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_plateau-vitroceramique-stream20-2.jpg?v=1775210181"},{"product_id":"plateau-vitroceramique-stream30","title":"STREAM30 Ceramic hob","description":"\u003cp style=\"text-align: justify;\"\u003eThe STREAM glass-ceramic build plate is the dedicated replacement print surface for first and second generation Volumic Stream 30 FDM printers (MK1 and MK2), in both Pro and Dual configurations. Made of glass-ceramic, it combines controlled flatness, a low coefficient of expansion, and good mechanical heat resistance, three characteristics sought after for the adhesion zone of an FDM printer in series production.\u003cbr\u003e\u003cbr\u003eCompared to the Stream 20 version, this plate covers a wider usable surface, adapted to the increased print volumes of the Stream 30. The glass-ceramic maintains its reference geometry (probing homogeneity, first layer flatness) after numerous thermal cycles, a necessary condition for the reproducibility of a prototyping or small-series industrial chain.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe plate mounts on the machine's original heated bed, following the procedure documented by Volumic in its online technical support. Once in place, it directly accepts FDM filaments compatible with deposition on glass-ceramic: an adhesive additive such as 3DLac spray can be applied to adjust adhesion according to the printed material and the geometry of the part. Routine maintenance is performed with IPA, on a cold plate, to degrease the surface between two prints and restore first layer adhesion.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003ePrint bed (surface)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFormat\u003c\/th\u003e\n\n\u003ctd\u003eAdapted to Stream 30 print volume\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFeatures\u003c\/th\u003e\n\n\u003ctd\u003eControlled flatness, low coefficient of expansion, good resistance to thermal cycles\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part \/ print surface\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream 30 first and second generation printers\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 PRO MK1 and Stream 30 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 DUAL MK1 and Stream 30 DUAL MK2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893877944664,"sku":"PID376","price":43.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_03_plateau-vitroceramique-stream30.jpg?v=1775210188"},{"product_id":"tube-ptfe-extrudeur-externe-80mm","title":"PTFE Extruder Tube (80mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThe External Extruder PTFE Tube is the replacement filament guide part for Volumic FDM printers of the Stream series. The PTFE (Polytetrafluoroethylene) tube ensures the passage of the filament between the extruder outlet and the hotend inlet, externally to the extrusion carriage.\u003cbr\u003e\u003cbr\u003ePTFE is chosen for its very low friction coefficient, good chemical resistance, and high-temperature resistance: these characteristics ensure a smooth and consistent filament feed without extrusion jerks or material accumulation, a critical point for machines operating in series production or with flexible materials sensitive to pushing forces.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe tube is installed in its quick connector (push-fit) according to the procedure documented by Volumic in its online technical support, with the machine off and the hotend cooled. Its replacement is recommended in case of clogging, internal marking by a loaded filament, or during a preventive maintenance operation on the extruder. Several lengths are available in the range depending on the printer model and the position of the tube in the guide chain (external or internal part).\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eFilament guide tube (push-fit)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003ePTFE (Polytetrafluoroethylene)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePosition\u003c\/th\u003e\n\n\u003ctd\u003eExtruder, external part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eLengths available in the range\u003c\/th\u003e\n\n\u003ctd\u003eSeveral lengths offered depending on the application\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\n\u003ctd\u003eLow coefficient of friction, good thermal and chemical resistance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ maintenance consumable\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series printers\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 PRO MK1 and Stream 20 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 PRO MK1 and Stream 30 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 20 DUAL MK1 and Stream 20 DUAL MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 DUAL MK1 and Stream 30 DUAL MK2\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 Ultra\u003c\/li\u003e\n\n  \u003cli\u003eStream 30 SC\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878174040,"sku":"PID378","price":3.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_tube-ptfe-extrudeur-externe-80mm-2.jpg?v=1775220984"},{"product_id":"plateau-vitroceramique-magnetique-mk3-sc2","title":"Magnetic glass-ceramic hob MK3\/SC2","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK3\/SC2 Magnetic Glass Ceramic Build Plate is the replacement printing surface for Volumic Stream 30 PRO MK3 and Stream 30 SC2 FDM printers. It combines a glass-ceramic plate with a magnetic attachment system, simplifying the placement and removal of the plate during series production operations.\u003cbr\u003e\u003cbr\u003eThe glass-ceramic provides controlled flatness, a low coefficient of thermal expansion, and good mechanical resistance to thermal cycles, ensuring consistent probing and first layer adhesion over time. The magnetic attachment allows for quick surface changes (for example, between a plate dedicated to production and a plate dedicated to prototyping), without the need for tools.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe build plate is positioned directly on the machine's magnetic heated bed, following the procedure documented by Volumic in its online technical support. Once in place, it receives FDM filaments compatible with deposition on glass-ceramic: an adhesive additive like 3DLac spray can be applied to adjust adhesion according to the material and geometry of the part. Routine maintenance is performed with IPA, on a cold build plate, to degrease the surface between two prints and restore first-layer adhesion.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eMagnetic Print Bed (Surface)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eGlass-ceramic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eAttachment\u003c\/th\u003e\n\n\u003ctd\u003eMagnetic, on original heated bed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFeatures\u003c\/th\u003e\n\n\u003ctd\u003eControlled flatness, low coefficient of thermal expansion, good resistance to thermal cycles\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part \/ printing surface\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series printers equipped with a magnetic heated bed\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 SC2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878206808,"sku":"PID4298","price":67.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_11_plateau-vitroceramique-magnetique-mk3sc2-1.jpg?v=1775228199"},{"product_id":"chaussette-bloc-de-chauffe-v2-gen3","title":"Heater block sock v2 \u0026 Gen3","description":"\u003cp style=\"text-align: justify;\"\u003eThe STANDARD\/PLUS heater block sock is a maintenance part intended for compatible Volumic print heads. Installed around the heater block, it helps to limit thermal variations in the extrusion zone and contributes to temperature stability during FDM printing cycles.\u003cbr\u003e\u003cbr\u003eThis silicone protection also reduces the adherence of melted filament residues to the heater block, which facilitates routine head maintenance and limits material accumulation during long or repeated prints.\u003c\/p\u003e \u003ch2\u003eUse in a production environment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eDesigned for Volumic's STANDARD\/PLUS heads, this sock is integrated into the preventive maintenance operations of extrusion systems. Its position around the heater block helps to maintain more homogeneous thermal diffusion and limit direct exposure to cooling airflow.\u003cbr\u003e\u003cbr\u003eIt can be replaced quickly during cleaning operations or heating element changes. Its use is particularly relevant in printing environments requiring controlled thermal regularity and reduced downtime.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eHeater block sock\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eThermal protection of the heater block\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eHead compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSTANDARD\/PLUS heads\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMounting\u003c\/th\u003e\n\n\u003ctd\u003eDirect installation on compatible heater block\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eSTANDARD\/PLUS print heads\u003c\/li\u003e \u003cli\u003eVolumic STREAM30 ULTRA\u003c\/li\u003e \u003cli\u003eVolumic STREAM30 ULTRA SUPERCHARGED\u003c\/li\u003e \u003cli\u003eVolumic STREAM30 PRO MK3\u003c\/li\u003e \u003cli\u003eVolumic EXO42\u003c\/li\u003e \u003cli\u003eVolumic SH65\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878239576,"sku":"PID4368","price":5.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_chaussette-bloc-de-chauffe-v2-gen3.jpg?v=1775231793"},{"product_id":"barriere-thermique-tete-gen3","title":"Gen3 cylinder head thermal barrier","description":"\u003cp style=\"text-align: justify;\"\u003eThe Gen3 Hotend thermal barrier is a spare part for Volumic extrusion systems equipped with Gen3 hotends. Positioned between the heatsink and the heater block, it ensures the thermal separation necessary for the proper functioning of the filament melting zone during FDM printing.\u003cbr\u003e\u003cbr\u003eThis part contributes to the stability of the material flow by limiting heat transfer to the cold part of the extruder. Controlled thermal management helps reduce the risk of premature filament softening and clogging during long or repeated prints.\u003c\/p\u003e \u003ch2\u003eIntegration into the extrusion system\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eDesigned for Volumic Gen3 hotends, this thermal barrier is integrated into maintenance operations or the replacement of components subject to thermal wear. Its role is particularly important when using technical materials requiring high extrusion temperatures or prolonged printing cycles.\u003cbr\u003e\u003cbr\u003eReplacing a damaged or fouled thermal barrier helps preserve the performance of the entire hotend and maintain consistent extrusion. This part is intended for use on compatible equipment from the manufacturer.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eThermal barrier\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eHotend thermal separation\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eHead compatibility\u003c\/th\u003e\n\n\u003ctd\u003eGen3 hotend\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic Gen3 extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic Gen3 print heads\u003c\/li\u003e \u003cli\u003eVolumic machines compatible with Gen3 hotend\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878272344,"sku":"PID4373","price":53.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_11_barriere-thermique-tete-gen3-2.jpg?v=1775246168"},{"product_id":"bloc-de-chauffe-complet-performance","title":"Complete performance heater block","description":"\u003cp style=\"text-align: justify;\"\u003eThe complete STANDARD\/PLUS HD heating block is a replacement assembly for compatible Volumic extrusion systems. Pre-assembled for quick integration on the printheads concerned, it includes the elements necessary to maintain the filament's melting temperature for professional FDM use.\u003cbr\u003e\u003cbr\u003eThis complete configuration facilitates maintenance operations and helps limit production interruptions when replacing a worn or damaged heating block. Its architecture is adapted to the thermal constraints encountered during repeated or long-duration printing.\u003c\/p\u003e \u003ch2\u003eThermal management and extrusion\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe heating block ensures thermal transfer between the heating cartridge and the nozzle to guarantee homogeneous melting of the material before extrusion. Stable thermal diffusion helps maintain regular extrusion and limit flow variations during printing.\u003cbr\u003e\u003cbr\u003eCompatible with STANDARD\/PLUS HD heads from the Volumic range, this assembly is intended for replacement operations on FDM equipment requiring preventive or corrective maintenance. It can be used in prototyping, series production, or technical manufacturing environments.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eComplete heating block\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eHead compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSTANDARD\/PLUS HD\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eFilament melting and thermal maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\n\u003ctd\u003eComplete pre-assembled unit\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUse\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and hotend replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eSTANDARD\/PLUS HD printheads\u003c\/li\u003e \u003cli\u003eVolumic HD extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic machines compatible with STANDARD\/PLUS HD hotend\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878436184,"sku":"PID4484","price":131.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_11_bloc-de-chauffe-complet-performance.png?v=1775231790"},{"product_id":"barriere-thermique-ceramique-tete-gen3","title":"Gen3 ceramic thermal barrier head","description":"\u003cp style=\"text-align: justify;\"\u003eThe Gen3 ceramic thermal barrier is a spare part dedicated to Volumic Performance (Gen3) extruder heads used in SH, EXO, and Stream series FDM printers. Its function is to create a thermal break between the heating block and the cooling body, a critical point for stabilizing the filament melting zone and preventing heat from rising into the cold part of the hotend.\u003cbr\u003e\u003cbr\u003eThis version combines a copper body, chosen for its high thermal conductivity, with an internal ceramic conduit. The ceramic provides increased hardness of the filament channel and improved cooling, which are particularly sought after when printing highly abrasive or heavily filled materials.\u003c\/p\u003e\n\u003ch2\u003eApplications and Implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe part is particularly intended for demanding use profiles: intensive printing of fiber-filled filaments (carbon, glass), metal composites, highly filled technical polymers. The ceramic conduit limits wear of the extrusion channel which, on a standard thermal barrier, degrades over time and leads to flow defects. Installation is carried out according to the procedure documented by Volumic in its online technical support, with the machine off and the head cooled; an extrusion test and E-step calibration should be performed after reassembly to validate the regularity of the flow.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eHotend thermal barrier (thermal break)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eGeneration\u003c\/th\u003e\n\n\u003ctd\u003eGen3, dedicated to Performance heads\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBody Material\u003c\/th\u003e\n\n\u003ctd\u003eCopper\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eInternal Conduit Material\u003c\/th\u003e\n\n\u003ctd\u003eCeramic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFeatures\u003c\/th\u003e\n\n\u003ctd\u003eReinforced channel hardness, improved cooling\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eTarget Filaments\u003c\/th\u003e\n\n\u003ctd\u003eHighly abrasive filled materials (carbon fibers, glass fibers, composites)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ accessory for printing technical materials\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Performance (Gen3) extruder heads\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 SC2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n\n  \u003cli\u003eVolumic EXO42 and EXO65\u003c\/li\u003e\n\n  \u003cli\u003eNot intended for Standard and Plus series heads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878501720,"sku":"PID4511","price":58.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/barriere-thermique-ceramique-tete-gen3-3.jpg?v=1779435427"},{"product_id":"barriere-thermique-pro-1-75mm","title":"Thermal barrier PRO 1.75mm","description":"\u003cp style=\"text-align: justify;\"\u003eThis thermal barrier is a spare part for compatible Volumic extrusion systems. Positioned between the heating block and the heatsink, it helps limit heat transfer within the print head to maintain a stable melt zone for the filament during FDM printing.\u003cbr\u003e\u003cbr\u003eIts design is adapted for extrusion configurations using 1.75 mm filament and helps preserve hotend operation during maintenance or replacement of wear parts.\u003c\/p\u003e \u003ch2\u003eIntegration into extrusion system\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe thermal barrier directly contributes to the thermal separation between the hot and cold zones of the extruder. Controlled heat dissipation helps limit clogging issues caused by excessive heat rising into the filament, especially during long prints or at high temperatures.\u003cbr\u003e\u003cbr\u003eThis part is designed for compatible Volumic STREAM PRO series 3D printers and is integrated into preventive maintenance operations for professional extrusion assemblies.\u003c\/p\u003e \u003ch2\u003eMaintenance and replacement\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eReplacing a thermal barrier may be necessary in case of mechanical wear, thread damage, or after several intensive thermal cycles. Regular inspection of the hotend's condition helps maintain stable extrusion and consistent deposition for technical prints.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003eThermal barrier\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part for FDM print head\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFilament compatibility\u003c\/th\u003e\n\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eManufacturer reference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable according to compatible versions\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eSTREAM 20 PRO MK1, STREAM 30 PRO MK1, STREAM 20 PRO MK2, STREAM 30 PRO MK2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eCompatible with STREAM PRO MK1\u003c\/li\u003e \u003cli\u003eCompatible with STREAM PRO MK2\u003c\/li\u003e \u003cli\u003eCompatible with 1.75 mm filament extrusion systems of the relevant ranges\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878534488,"sku":"PID465","price":22.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2021_09_barriere-thermique-pro-1.75mm-2-4_6e65414b-ff70-4e45-998d-e10f441b1aac.jpg?v=1775213789"},{"product_id":"tube-tete-interne-pro-65mm","title":"PRO Internal Head Tube (65mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThe PRO internal head tube is a replacement part for compatible Volumic extrusion systems. Integrated within the print head, it guides the filament between the different zones of the hotend to ensure a steady supply to the melt chamber during FDM printing.\u003cbr\u003e\u003cbr\u003eThis part helps maintain the continuity of the material flow and limits internal friction that could affect extrusion quality. Its replacement may be necessary as part of preventive maintenance or after wear due to the use of filled or abrasive materials.\u003c\/p\u003e \u003ch2\u003eOperation in the extrusion chain\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe internal tube provides the mechanical and thermal connection between the various components of the print head. An adapted geometry helps preserve the filament path while limiting the risk of blockages or deformation during repeated thermal cycles.\u003cbr\u003e\u003cbr\u003eCompatible with the relevant Volumic PRO heads, this part is integrated into the maintenance operations of FDM systems used in prototyping, technical production, or continuous manufacturing. Its integration helps maintain stable extrusion behavior on compatible equipment.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct type\u003c\/th\u003e\n\n\u003ctd\u003ePrint head internal tube\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eFilament guide in the hotend\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eHead compatibility\u003c\/th\u003e\n\n\u003ctd\u003ePRO head\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\n\u003ctd\u003eFDM 3D printing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eMaintenance and replacement\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several references depending on machine configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic PRO print heads\u003c\/li\u003e \u003cli\u003eCompatible Volumic extrusion systems\u003c\/li\u003e \u003cli\u003eVolumic professional machines using a PRO hotend\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878600024,"sku":"PID483","price":3.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2020_07_tube-tete-interne-pro-65mm-2.jpg?v=1775220993"},{"product_id":"barriere-thermique-dual-1-75mm","title":"Thermal Barrier DUAL 1.75mm","description":"\u003cp style=\"text-align: justify;\"\u003eThis Dual thermal barrier is a spare part designed for Volumic extrusion systems equipped with a dual extrusion configuration. Installed between the heat sink and the heater block, it provides the thermal insulation necessary to maintain a stable melting zone for the filament during FDM printing.\u003cbr\u003e\u003cbr\u003eDesigned for professional printing assemblies, this part contributes to extrusion consistency and limits heat creep into the hotend, especially during long prints or when using technical materials.\u003c\/p\u003e \u003ch2\u003eDual Extrusion Operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eIn a Dual architecture, the thermal barrier contributes to the proper thermal balance of each extrusion path to maintain filament fluidity in the melt zone while limiting the risk of clogging in the cold end. Its replacement may be necessary in case of mechanical wear, thread deterioration, or after several intensive thermal cycles.\u003cbr\u003e\u003cbr\u003eThis part is suitable for preventive maintenance operations on compatible Volumic 3D printers equipped with a dual extrusion system.\u003c\/p\u003e \u003ch2\u003eMaintenance and Integration\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe thermal barrier integrates into the hotend assembly of the printers concerned and must be mounted carefully to ensure proper thermal contact between the different heating and cooling elements. Regular maintenance of the extrusion system helps maintain stable printing conditions for technical productions and extended series.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\n\u003ctd\u003eDual Thermal Barrier\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part for FDM extrusion system\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\n\u003ctd\u003eDual extrusion\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eFilament Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eCompatible with multiple diameters depending on machine configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eCompatible Volumic Dual 3D Printers\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eAvailable References\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several references depending on extrusion configuration\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCompatible Volumic FDM 3D printers\u003c\/li\u003e \u003cli\u003eDual extrusion printing configurations\u003c\/li\u003e \u003cli\u003eCompatible with Volumic Dual ranges\u003c\/li\u003e \u003cli\u003eCompatible with Volumic professional hotend assemblies\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878632792,"sku":"PID484","price":21.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/barriere-thermique-dual-1.75mm-3.jpg?v=1779463617"},{"product_id":"tube-tete-interne-dual-x2-66mm","title":"Internal Head Tube DUAL (x2 - 66mm)","description":"\u003cp style=\"text-align: justify;\"\u003eThe DUAL internal head tube is a guide part designed for Volumic DUAL type print heads. Positioned within the head assembly, it ensures the passage of the filament between the drive system and the melting zone to maintain a consistent feed during FDM extrusion cycles.\u003cbr\u003e\u003cbr\u003eThis maintenance consumable contributes to the stability of the filament path and the smooth operation of multi-material or dual-extrusion prints. Its replacement may be necessary in case of internal wear, clogging, or degradation related to repeated thermal and mechanical stresses.\u003c\/p\u003e \u003ch2\u003eMaintenance and Implementation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eReplacing the internal tube allows for the restoration of controlled extrusion conditions on compatible heads and limits the risks of excessive friction, under-extrusion, or filament blockage. This part is suitable for preventive maintenance operations in professional environments or production workshops.\u003cbr\u003e\u003cbr\u003eThe packaging includes two internal tubes, 66 mm long, designed for Volumic compatible DUAL systems. Installation must be carried out on a cooled and disassembled head in accordance with the manufacturer's maintenance procedures.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eInternal head tube\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSystem Compatibility\u003c\/th\u003e\n\n\u003ctd\u003eDUAL head\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eLength\u003c\/th\u003e\n\n\u003ctd\u003e66 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003ePackaging\u003c\/th\u003e\n\n\u003ctd\u003ePack of 2 tubes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eFilament guide for FDM extrusion\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several references depending on compatible configurations\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic FDM 3D Printers\u003c\/li\u003e \u003cli\u003eVolumic DUAL Print Heads\u003c\/li\u003e \u003cli\u003eCompatible STREAM20 \u0026amp; 30 DUAL MK1\u003c\/li\u003e \u003cli\u003eCompatible STREAM20 \u0026amp; 30 DUAL MK2\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878665560,"sku":"PID486","price":5.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/tube-tete-interne-dual-x2-66mm-3.jpg?v=1779464533"},{"product_id":"plateau-vitroceramique-magnetique-exo42","title":"EXO42 magnetic ceramic hob","description":"\u003cp style=\"text-align: justify;\"\u003eThe magnetic ceramic glass plate for EXO42 is a printing surface element designed for Volumic large-format FDM systems. It combines a ceramic glass base with a magnetic interface, allowing for quick attachment and removal of the plate while ensuring a flat surface suitable for professional printing cycles.\u003cbr\u003e\u003cbr\u003eThis type of plate is used as an adhesion support for printed parts and contributes to dimensional stability during the initial layers. Its design is geared towards production use, prototyping, and manufacturing technical parts requiring good flatness and a homogeneous contact surface.\u003c\/p\u003e \u003ch2\u003ePrinting Behavior\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe ceramic glass surface provides a rigid and stable base, limiting deformations related to thermal variations of the heated bed. The magnetic interface facilitates maintenance operations and replacement of the support without heavy mechanical intervention on the machine.\u003cbr\u003e\u003cbr\u003eThis type of plate is suitable for FDM materials commonly used in professional environments, with controlled adhesion on the first layer and easier release after cooling, reducing the risk of part deformation during detachment.\u003c\/p\u003e \u003ch2\u003eMaintenance and Operation\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe magnetic ceramic glass plate is designed for repeated use cycles in workshops or continuous production. Cleaning should be performed on a cold surface to preserve adhesion properties and surface flatness.\u003cbr\u003e\u003cbr\u003eThe magnetic system allows for quick plate replacement in case of wear or changes in production configuration, limiting machine downtime and facilitating the management of 3D printer fleets.\u003c\/p\u003e \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003ePrint bed\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eTechnology\u003c\/th\u003e\n\n\u003ctd\u003eFDM\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eSurface\u003c\/th\u003e\n\n\u003ctd\u003eCeramic glass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eAttachment system\u003c\/th\u003e\n\n\u003ctd\u003eMagnetic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eAdditive manufacturing support\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eMachine compatibility\u003c\/th\u003e\n\n\u003ctd\u003eEXO42 platform\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003ctr\u003e\n\n\u003cth\u003eReference\u003c\/th\u003e\n\n\u003ctd\u003eAvailable in several configurations depending on compatible models\u003c\/td\u003e\n\n\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eVolumic large-format FDM 3D printers\u003c\/li\u003e \u003cli\u003eVolumic EXO42 platform\u003c\/li\u003e \u003cli\u003ePrinting systems equipped with an interchangeable magnetic bed\u003c\/li\u003e \u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893878763864,"sku":"PID5376","price":179.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/plateau-vitroceramique-magnetique-exo42-6.jpg?v=1779464850"},{"product_id":"roulements-pour-double-entrainement-sc-sc2-mk3-sh-exo","title":"Bearings for double drive (SC\/SC2\/MK3\/SH\/EXO)","description":"\u003cp style=\"text-align: justify;\"\u003eThe Double-Drive Bearing Kit is a spare part dedicated to the filament drive shaft of double-drive extruders found on Volumic FDM printers from the Stream 30, SH, and EXO series, in their Standard, Plus, IDRE, and Performance versions. The kit includes two stainless steel ball bearings, to be mounted on the extruder's drive shaft.\u003cbr\u003e\u003cbr\u003eOn a double-drive system, two synchronous knurled wheels grip the filament to ensure positive, slip-free feeding. The bearings support the radial and axial forces generated by the filament tension and the stepper motor's torque. Their periodic replacement is part of the preventive maintenance for extruders in series production.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is necessary when the bearings show play, a hard spot, or roughness in movement, or in case of extrusion irregularities not attributable to the hotend or filament. The operation is performed with the printer off and the extruder removed from the carriage, following the procedure documented by Volumic in its online technical support. A check after reassembly is required: the shaft must turn freely without any hard spots, and the double-drive tension must be recalibrated to ensure consistent feeding without filament deformation.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eBall bearings for double-drive filament drive shaft\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eStainless steel (INOX)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity per kit\u003c\/th\u003e\n\n\u003ctd\u003e2 bearings\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003eDouble-drive extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ preventive maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic double-drive extruders from Stream 30, SH, and EXO series\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 SC and Stream 30 SC2 (Standard and Performance versions)\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65 (Standard, IDRE, and Performance versions)\u003c\/li\u003e\n\n  \u003cli\u003eVolumic EXO42 (Standard, IDRE, and Performance versions)\u003c\/li\u003e\n\n  \u003cli\u003eVolumic EXO65 (Standard, IDRE, and Performance versions)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879091544,"sku":"PID5932","price":9.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/roulements-pour-double-entrainement-scsc2mk3shexo-3.jpg?v=1779696204"},{"product_id":"moteur-extrudeur-mk1-mk2-ultra","title":"MK1\/MK2\/ULTRA Extruder Motor","description":"\u003cp style=\"text-align: justify;\"\u003eThe MK1\/MK2\/ULTRA Extruder Motor is a replacement stepper motor dedicated to the extruders of first and second generation Volumic FDM Stream printers, as well as the Stream 30 Ultra. Its function is to drive the filament through the hotend at the flow rate imposed by the firmware, a critical operation for extrusion regularity and the dimensional quality of the produced parts.\u003cbr\u003e\u003cbr\u003eThis part is also used for the X-axis of the Stream MK1 and MK2 range, making it a versatile maintenance part to keep in stock in workshops operating a multi-machine fleet of these generations.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is necessary when the motor exhibits skipped steps, abnormal heating, insufficient torque, or unusual mechanical noises, or in cases of extrusion irregularities not attributable to the hotend, mechanical extruder, or filament. The operation is performed with the printer turned off, following the procedure documented by Volumic in its online technical support. After reassembly, an extrusion test and E-step calibration must be performed to validate flow regularity; for use on the X-axis, check belt tension and the absence of play at the end of the stroke.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eStepper motor (extruder \/ X-axis)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMain function\u003c\/th\u003e\n\n\u003ctd\u003eFilament drive on Stream MK1\/MK2\/Ultra extruder\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSecondary function\u003c\/th\u003e\n\n\u003ctd\u003eX-axis motor on Stream MK1 and MK2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eQuantity\u003c\/th\u003e\n\n\u003ctd\u003e1 motor\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement \/ maintenance part\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series printers first and second generation, and Stream Ultra\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 PRO MK1 and Stream 30 PRO MK1\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 DUAL MK1 and Stream 30 DUAL MK1\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 PRO MK2 and Stream 30 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 DUAL MK2 and Stream 30 DUAL MK2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 Ultra\u003c\/li\u003e\n\n  \u003cli\u003eCan be used as an X-axis motor on Stream MK1 and MK2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879222616,"sku":"PID834","price":29.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/moteur-extrudeur-mk1mk2ultra-3.jpg?v=1779696994"},{"product_id":"cache-tete-v2-stream-pro","title":"Stream PRO headguard v2","description":"\u003cp style=\"text-align: justify;\"\u003eThe v2 STREAM PRO Head Cover is the replacement fairing part dedicated to the extrusion head of Volumic Stream 20 PRO MK2 and Stream 30 PRO MK2 FDM printers. It encloses the entire hotend and the head's mechanics, ensuring both the protection of internal components (electrical harness, ventilation, sensors) and the channeling of the airflow generated by the part cooling fan.\u003cbr\u003e\u003cbr\u003eThis spare part allows for replacing a damaged, cracked, or filament-stained cover without interfering with the hotend's thermal components. The fairing also contributes to the machine's finished appearance in a series production workshop.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe cover mounts directly onto the extrusion head, with the machine off and the hotend cooled, following the procedure documented by Volumic in its online technical support. The operation does not require disassembling the heating block or modifying the wiring: it is a purely mechanical replacement, achievable by a Level 1 maintenance operator. A visual inspection of proper positioning and free airflow must be performed after reassembly.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eExtrusion head cover \/ fairing (v2 version)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eFunction\u003c\/th\u003e\n\n\u003ctd\u003eProtection of head components and channeling of cooling airflow\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eGeneration\u003c\/th\u003e\n\n\u003ctd\u003eStream MK2 (second generation)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ aesthetic and functional maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic Stream series second-generation (MK2) printers – PRO versions\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 PRO MK2\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879648600,"sku":"PID897","price":9.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/cache-tete-v2-stream-pro-3.jpg?v=1779698821"},{"product_id":"bloc-de-chauffe-ultra-sc-mk3-v2","title":"STANDARD\/PLUS Heating Block (NON HD)","description":"\u003cp style=\"text-align: justify;\"\u003eThe STANDARD\/PLUS (NON HD) Heater Block is the spare part dedicated to the melting zone of Volumic Stream Ultra and Stream SC extrusion heads in version 2, mounted on all the brand's Standard and Plus FDM printers. Made of high-temperature (HT) nickel-plated copper, it ensures the heating and temperature maintenance of the filament in the immediate vicinity of the nozzle, a critical point for consistent extrusion flow.\u003cbr\u003e\u003cbr\u003eThe copper + nickel coating combination offers high thermal conductivity coupled with good resistance to corrosion and wear: the block gains in thermal performance and longevity compared to a standard aluminum block, a direct benefit for machines in series production operating across extended temperature ranges. However, this reference is not compatible with high-flow (HD) heads, which use a dedicated heater block.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement occurs in the event of thermal degradation (deformation, un-cleanable deposits), filament leakage around the nozzle, or during a preventive maintenance operation on the hotend. The operation is performed with the printer off and the head cooled, following the procedure documented by Volumic in its online technical support; disassembly involves removing the nozzle, heater cartridge, and thermistor, which must be reassembled with controlled torque and positioning. After reassembly, a PID tune and an extrusion test must be performed to validate thermal regulation and flow consistency.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart type\u003c\/th\u003e\n\n\u003ctd\u003eHotend heater block (v2 version, NON HD)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eMaterial\u003c\/th\u003e\n\n\u003ctd\u003eHigh-temperature (HT) nickel-plated copper\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eApplication\u003c\/th\u003e\n\n\u003ctd\u003eStream Ultra and Stream SC heads in version 2\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\n\u003ctd\u003eIncreased thermal performance, good longevity\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eRestriction\u003c\/th\u003e\n\n\u003ctd\u003eNot compatible with high-flow (HD) heads\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ hotend maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003eVolumic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eVolumic printers in Standard and Plus versions (non-HD heads, v2)\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 PRO MK1 and Stream 30 PRO MK1\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 DUAL MK1 and Stream 30 DUAL MK1\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 PRO MK2 and Stream 30 PRO MK2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 20 DUAL MK2 and Stream 30 DUAL MK2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 PRO MK3\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 SC and Stream 30 SC2\u003c\/li\u003e\n\n  \u003cli\u003eVolumic Stream 30 Ultra\u003c\/li\u003e\n\n  \u003cli\u003eVolumic SH65\u003c\/li\u003e\n\n  \u003cli\u003eVolumic EXO42 and EXO65\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with heads in high-flow (HD) configuration\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Default Title","offer_id":56893879746904,"sku":"PID980","price":38.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/bloc-de-chauffe-standardplus-non-hd-3.jpg?v=1779699120"},{"product_id":"thermistor-ntc-100k-115-mm","title":"NTC Thermistor 100k - 115 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe NTC 100k Thermistor - 115 mm is the replacement thermal probe dedicated to Prusa Research FDM printers equipped with a Nextruder extruder (MK4, MK3.9, CORE One ranges). It provides real-time measurement of the heater block or heatsink temperature, fundamental data used by the firmware to regulate heating resistance and trigger the machine's thermal safety features.\u003cbr\u003e\u003cbr\u003eAs an NTC (negative temperature coefficient) type with a nominal resistance of 100 kΩ, this sensor conforms to the profile expected by Prusa firmware, ensuring controlled regulation without software recalibration upon reassembly. Depending on the printer model, this thermistor is also used for heatsink monitoring on the XL.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is necessary in case of inconsistent readings, thermal errors during printing, or physical sensor failure (wire breakage, insulation). The operation is performed with the printer off and the hotend cooled, following the procedure documented in the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product is delivered with its M3×4 locking screw ready to install. After reassembly, check reading consistency during cold start and run a PID tune to validate thermal regulation stability.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eThermal probe (NTC thermistor)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eNominal Resistance\u003c\/th\u003e\n\n\u003ctd\u003e100 kΩ\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCable Length\u003c\/th\u003e\n\n\u003ctd\u003e115 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eSensor Type\u003c\/th\u003e\n\n\u003ctd\u003eNTC (negative temperature coefficient)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eContents of delivery\u003c\/th\u003e\n\n\u003ctd\u003e1 NTC 100k 115 mm thermistor + 1 M3×4 locking screw\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\n\u003ctd\u003eInstallation procedure at help.prusa3d.com (by printer model)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eReplacement part \/ hotend or heatsink maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL (heatsink temperature measurement)\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with earlier generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with MK3.5, MK3.5S, HT90 or INDX models\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893893804376,"sku":"IDF__10601_IDS__1576","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9e4ee773-c070-4777-821c-dc3866a2a049.jpg?v=1779700115"},{"product_id":"heater-40-w-120-mm","title":"Heater 40 W - 120 mm","description":"\u003cp style=\"text-align: justify;\"\u003eThe Heater 40W - 120mm is the replacement heater cartridge designed for the Nextruder extruder used in the latest generation of Prusa Research FDM printers (MK4, MK3.9, CORE One ranges). Its function is to transfer electrical power to the hotend block to bring the melt zone to the target temperature set by the firmware, which is critical for consistent extrusion flow.\u003cbr\u003e\u003cbr\u003eRated at 40W at 24V, this cartridge conforms to the thermal profile expected by Prusa firmware, ensuring controlled heating behavior without software modification during reassembly. Its 120mm cable length matches the original wiring path on the Nextruder.\u003c\/p\u003e\n\u003ch2\u003eImplementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eReplacement is performed in case of heating failure, thermal error during printing, loss of contact, or localized overheating. The operation is carried out with the printer turned off and the hotend cooled, following the procedure documented in the Prusa knowledge base (help.prusa3d.com), by selecting the relevant printer model and following the corresponding repair manual. The product comes with the M3×4 locking screws required for assembly. After reassembly, perform a PID tune to validate the thermal regulation of the cartridge\/block combination and check the consistency of the temperature reading at cold start.\u003c\/p\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePart Type\u003c\/th\u003e\n\n\u003ctd\u003eHeater cartridge (resistive element)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eVoltage\u003c\/th\u003e\n\n\u003ctd\u003e24 V\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePower\u003c\/th\u003e\n\n\u003ctd\u003e40 W\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eCable length\u003c\/th\u003e\n\n\u003ctd\u003e120 mm\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\n\u003ctd\u003e1x 40W \/ 120mm heater cartridge + 2x M3×4 locking screws\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eDocumentation\u003c\/th\u003e\n\n\u003ctd\u003eInstallation procedure on help.prusa3d.com (per printer model)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eUsage\u003c\/th\u003e\n\n\u003ctd\u003eSpare part \/ hotend maintenance\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n  \u003ctr\u003e\n\n\u003cth\u003eBrand\u003c\/th\u003e\n\n\u003ctd\u003ePrusa Research\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePrusa Research printers equipped with a Nextruder extruder\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK4 and MK4S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa MK3.9 and MK3.9S\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa XL\u003c\/li\u003e\n\n  \u003cli\u003eOriginal Prusa CORE One, CORE One+ and CORE One L\u003c\/li\u003e\n\n  \u003cli\u003eNot compatible with previous generations (MK3S, MK3, MK2.5S, MK2.5, MINI, MINI+, SL1, SL1S, CW1, CW1S) and with MK3.5 \/ MK3.5S, HT90 models or enclosures (MKx Enclosure, XL Enclosure, MINI Enclosure)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":56893894000984,"sku":"IDF__10923_IDS__1568","price":10.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/c73f9ccb-2960-40a6-b0d8-3d7130a7774c.jpg?v=1779700727"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_parts_header_collection.webp?v=1779363599","url":"https:\/\/3dprint.shop\/en\/collections\/pieces-detachees.oembed?page=2","provider":"3dPrint.Shop","version":"1.0","type":"link"}