{"title":"Francofil","description":"\u003cp\u003eRetrouvez dans cette collection les filaments Francofil extrudés en Normandie, du PLA standard aux PLA chargés en coproduits français (coquillages, blé, marc de café) et aux matières techniques PETG, ABS, ASA et TPU.\u003c\/p\u003e","products":[{"product_id":"filament-pla","title":"PLA Filament","description":"\u003cp style=\"text-align: justify;\"\u003eFrancofil PLA is a bioplastic made from the polymerisation of corn starch, guaranteed by the manufacturer free of endocrine disruptors. Its high pigmentation rate gives deeper colours on printed parts.\u003cbr\u003e\u003cbr\u003eSupplied on 1 kg spools in 1.75 and 2.85 mm diameters, it prints on most FDM printers accepting non-proprietary filament.\u003c\/p\u003e\n\u003ch2\u003eProcessing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFrancofil recommends an extrusion temperature of 190 to 230 °C, a bed between 40 and 60 °C, a speed of 30 to 100 mm\/s and a brass nozzle. The mechanical properties in the table are measured on specimens printed at 205 °C and 50 mm\/s, with 0,1 mm layers, 100 % infill and a 0,4 mm nozzle.\u003cbr\u003e\u003cbr\u003eThe glass transition, measured at 57,5 °C, sets the temperature above which a part loses its rigidity.\u003c\/p\u003e\n\u003ch2\u003eStorage and precautions\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe safety data sheet recommends storage below 40 °C, away from UV, moisture, chemicals and food. Keeping the molten polymer above 230 °C for extended periods causes it to degrade. The material is recyclable and biodegradable in industrial composting conditions.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eFrancofil\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003ePLA\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003ctd\u003e1.75 and 2.85 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePackaging\u003c\/th\u003e\u003ctd\u003e1 kg spool\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eSpool dimensions\u003c\/th\u003e\u003ctd\u003eØ 200 mm, width 67 mm, bore 52 mm, tare 246 g\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eNozzle temperature\u003c\/th\u003e\u003ctd\u003e190 to 230 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eBed temperature\u003c\/th\u003e\u003ctd\u003e40 to 60 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePrinting speed\u003c\/th\u003e\u003ctd\u003e30 to 100 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eNozzle\u003c\/th\u003e\u003ctd\u003eBrass\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDensity\u003c\/th\u003e\u003ctd\u003e1,24 g\/cm³ (ASTM D1505)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eMelt flow rate\u003c\/th\u003e\u003ctd\u003e7,2 g\/10 min (ISO 1133, 190 °C, 1,8 kg)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eGlass transition\u003c\/th\u003e\u003ctd\u003e57,5 °C (ISO 11357)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eMelting temperature\u003c\/th\u003e\u003ctd\u003e139 °C (ISO 11357)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eTensile modulus\u003c\/th\u003e\u003ctd\u003e2612 MPa (ISO 527)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eTensile yield strength\u003c\/th\u003e\u003ctd\u003e53 MPa (ISO 527)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eTensile strength at break\u003c\/th\u003e\u003ctd\u003e51 MPa (ISO 527)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eElongation at yield\u003c\/th\u003e\u003ctd\u003e2,1 % (ISO 527)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eElongation at break\u003c\/th\u003e\u003ctd\u003e2,5 % (ISO 527)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eFlexural strength at 23 °C\u003c\/th\u003e\u003ctd\u003e100 MPa (ISO 178)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eFlexural modulus\u003c\/th\u003e\u003ctd\u003e4960 MPa (ISO 178)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCharpy impact strength, notched, at 23 °C\u003c\/th\u003e\u003ctd\u003e2,6 kJ\/m² (ISO 179-1)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eCertifications\u003c\/th\u003e\u003ctd\u003eRoHS, Règlement UE n°10\/2011, FDA, REACH\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM printers using non-proprietary filament, in 1.75 or 2.85 mm\u003c\/li\u003e\n\u003cli\u003eBrass nozzle\u003c\/li\u003e\n\u003cli\u003eBed between 40 and 60 °C\u003c\/li\u003e\n\u003cli\u003eSpool holder suited to a Ø of 200 mm, a width of 67 mm and a bore of 52 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Francofil","offers":[{"title":"Noir \/ 1 kg \/ 2.85 mm","offer_id":58528687685976,"sku":"0128500010100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Blanc \/ 1 kg \/ 2.85 mm","offer_id":58528690110808,"sku":"0128500020100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Noir \/ 1 kg \/ 1.75 mm","offer_id":58543010054488,"sku":"0117500010100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Rouge RAL 3020 \/ 1 kg \/ 1.75 mm","offer_id":58620268511576,"sku":"0117530200100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Orange RAL 2003 \/ 1 kg \/ 1.75 mm","offer_id":58620268544344,"sku":"0117520030100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Bleu RAL 5015 \/ 1 kg \/ 1.75 mm","offer_id":58620268577112,"sku":"0117550150100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Jaune RAL 1018 \/ 1 kg \/ 1.75 mm","offer_id":58620268609880,"sku":"0117510180100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Blanc \/ 1 kg \/ 1.75 mm","offer_id":58620268642648,"sku":"0117500020100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Vert RAL 6018 \/ 1 kg \/ 1.75 mm","offer_id":58620268675416,"sku":"0117560180100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Phosphorescent Vert \/ 1 kg \/ 1.75 mm","offer_id":58621081583960,"sku":"0117500050100","price":33.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/24.jpg?v=1790957382"},{"product_id":"filament-petg","title":"PETG Filament","description":"\u003cp style=\"text-align: justify;\"\u003eFrancofil PETG targets functional parts exposed to impact and moisture, with a chemical resistance that PLA does not offer. It prints without noticeable odour and without an enclosure, which makes it simpler to bring into a workshop than ABS.\u003cbr\u003e\u003cbr\u003eThe 1 kg spool in 2.85 mm feeds large diameter machines, on which this material serves both functional prototyping and short production runs.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eExtrusion runs between 235 and 260 °C, on a bed held between 60 and 90 °C, at a documented speed of up to 100 mm\/s. Interlayer adhesion is strong and the mechanical properties exceed those of PLA, which points the material towards loaded parts rather than presentation volumes.\u003c\/p\u003e\n\u003ch2\u003eOutdoor use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eMoisture resistance and chemical resistance allow certain outdoor uses. Without a specific additive, the material remains sensitive to ultraviolet light, which limits prolonged sun exposure unless a surface protection is applied.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eFrancofil\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003ePETG\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003ctd\u003e2.85 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePackaging\u003c\/th\u003e\u003ctd\u003e1 kg spool\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eNozzle temperature\u003c\/th\u003e\u003ctd\u003e235 to 260 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eBed temperature\u003c\/th\u003e\u003ctd\u003e60 to 90 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePrinting speed\u003c\/th\u003e\u003ctd\u003e30 to 100 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eHeated bed\u003c\/th\u003e\u003ctd\u003eRequired\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM printers accepting 2.85 mm filament\u003c\/li\u003e\n\u003cli\u003eHeated bed required\u003c\/li\u003e\n\u003cli\u003eBrass or steel nozzles\u003c\/li\u003e\n\u003cli\u003eNo closed enclosure or filtration system required\u003c\/li\u003e\n\u003cli\u003eRange also listed in 1.75 mm and on 3 kg spools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Francofil","offers":[{"title":"Noir \/ 1 kg \/ 2.85 mm","offer_id":58528687751512,"sku":"0328500010100","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"Blanc \/ 1 kg \/ 2.85 mm","offer_id":58528690209112,"sku":"0328500020100","price":24.96,"currency_code":"EUR","in_stock":true}]},{"product_id":"filament-petg-esd","title":"PETG ESD Filament","description":"\u003cp style=\"text-align: justify;\"\u003eFrancofil PETG ESD builds on the brand's PETG base with dissipative behaviour, intended for parts handled in contact with components sensitive to electrostatic discharge. The virgin colour corresponds to unpigmented material.\u003cbr\u003e\u003cbr\u003eIts extrusion range of 270 to 290 °C sits above that of a standard PETG and calls for a nozzle able to hold those temperatures continuously.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe bed is set between 80 and 85 °C, a high value that limits first layer lifting on wide parts. Like any PETG, the material picks up moisture in open air and is stored in a dry box between prints.\u003c\/p\u003e\n\u003ch2\u003eField of use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament is used for fixtures, jigs and housings in contact with electronics, where charge build-up on a plastic part becomes a problem. It is extruded in France by Francofil, which places it in the technical range alongside its materials intended for constrained environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eFrancofil\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003ePETG ESD\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePackaging\u003c\/th\u003e\u003ctd\u003e1 kg spool\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eNozzle temperature\u003c\/th\u003e\u003ctd\u003e270 to 290 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eBed temperature\u003c\/th\u003e\u003ctd\u003e80 to 85 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM printers accepting 1.75 mm filament\u003c\/li\u003e\n\u003cli\u003eNozzle holding 290 °C continuously\u003c\/li\u003e\n\u003cli\u003eHeated bed set from 80 to 85 °C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Francofil","offers":[{"title":"Nature \/ 1 kg \/ 1.75 mm","offer_id":58543009956184,"sku":"3417500000100","price":91.63,"currency_code":"EUR","in_stock":true}]},{"product_id":"filament-petg-ptfe","title":"PETG-PTFE filament","description":"\u003cp style=\"text-align: justify;\"\u003ePETG filament filled with 10% PTFE, manufactured by Francofil in France. The PTFE gives the PETG anti-friction properties, so printed parts slide more freely and wear significantly less than standard PETG, while keeping good layer adhesion and a clean surface finish.\u003c\/p\u003e\u003ch2\u003eMoving and sliding parts\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eThis filament is aimed at parts subject to sliding or repeated movement: slides, gears, guides, bushings and other moving elements. It withstands impacts and abrasion better than standard PETG, and limits wear on the components it is in contact with.\u003cbr\u003e\u003cbr\u003eIts printing parameters remain close to those of PETG, making it usable on most FDM printers without settings specific to technical materials.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctr\u003e\u003cth\u003eBrand\u003c\/th\u003e\u003ctd\u003eFrancofil\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eReference\u003c\/th\u003e\u003ctd\u003eFRF146700\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003ePETG filled with 10% PTFE\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eWeight\u003c\/th\u003e\u003ctd\u003e1 kg\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eWhite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eOrigin\u003c\/th\u003e\u003ctd\u003eFrance\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eNozzle temperature\u003c\/th\u003e\u003ctd\u003e230-245 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBed temperature\u003c\/th\u003e\u003ctd\u003e60-90 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePrint speed\u003c\/th\u003e\u003ctd\u003e60 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eFDM printers accepting 1.75 mm filament\u003c\/li\u003e\u003c\/ul\u003e","brand":"Francofil","offers":[{"title":"1 kg \/ Blanc \/ 1.75 mm","offer_id":58696225849688,"sku":"FRF146700","price":49.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Plan-de-travail-124-copie-20.png?v=1791453074"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_francofil_header.png?v=1790669333","url":"https:\/\/3dprint.shop\/en\/collections\/francofil.oembed","provider":"3DPrint.shop","version":"1.0","type":"link"}