{"title":"Filaments","description":"\u003cp\u003e3D printing filaments designed and produced in Europe for reproducible results, in prototyping as well as production. Our catalogue covers the standards (PLA, PETG, ABS, ASA) as well as high-performance technical materials (PC, PA, PEEK, PPSU, TPU) and carbon- or glass-fibre filled composites.\u003c\/p\u003e\n\u003cp\u003eA reference designed for design offices, production workshops and print service providers looking for a reliable, traceable European supplier that is always in stock. Professional pack sizes and volume pricing available.\u003c\/p\u003e","products":[{"product_id":"filament-carbonio-cf15-treed-noir","title":"TreeD Carbonio CF15","description":"\u003cp style=\"text-align: justify;\"\u003eCarbonio CF15 is a polyamide filament filled with long carbon fibres. This formulation gives it high stiffness and mechanical strength, with low shrinkage on cooling.\u003cbr\u003e\u003cbr\u003eIts moisture uptake is markedly lower than that of common nylons, which reduces the drying usually required for this family of materials before printing.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eIts low water absorption (below 0.3 % per ISO 62) reduces defects linked to residual moisture, a sensitive point on standard polyamides. Since carbon fibres are abrasive, a hardened steel nozzle (Widia type) or a nozzle with a wear-resistant surface is recommended; a PTFE-coated nozzle should be avoided.\u003cbr\u003e\u003cbr\u003eThe filament can remain in the nozzle for up to 20 minutes without extruding. Beyond that, if the temperature drops below 210 °C, it is best to switch off the heater rather than resume printing directly.\u003c\/p\u003e\n\u003ch2\u003eDrying and processing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePre-drying for 2 hours at 70 °C is recommended for optimal processing, extended for spools over 1 kg. Extrusion is set between 230 and 250 °C, on a heated bed between 90 and 110 °C.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.25 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.3 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ISO 527)\u003c\/th\u003e\n\u003ctd\u003e170 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ISO 527)\u003c\/th\u003e\n\u003ctd\u003e15 GPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eImpact strength (ISO 179 1eU)\u003c\/th\u003e\n\u003ctd\u003e47 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ISO 527)\u003c\/th\u003e\n\u003ctd\u003e1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat deflection temperature, HDT A\u003c\/th\u003e\n\u003ctd\u003e200 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eContinuous service temperature\u003c\/th\u003e\n\u003ctd\u003e150 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended extrusion temperature\u003c\/th\u003e\n\u003ctd\u003e230-250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e90-110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMinimum nozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDesktop FDM\/FFF printers with a heated bed\u003c\/li\u003e\n  \u003cli\u003eHardened steel nozzle, Widia type, or wear-resistant surface (PTFE nozzle not recommended)\u003c\/li\u003e\n  \u003cli\u003eMinimum nozzle diameter of 0.5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"TreeD","offers":[{"title":"Noir \/ 0.75 kg \/ 1.75 mm","offer_id":56893910843736,"sku":"CARB7509005","price":80.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2024_05_noir-pet-carbone_2c6acba0-2fa8-493a-b824-195395aeee38.jpg?v=1775256972"},{"product_id":"treed-pps-cf15-750g","title":"TreeD PPS CF15 750 g","description":"\u003cp\u003ePPS CF. Same base as natural PPS, with 15% carbon fibre. Resistant to chemical attack. Lightweight and rigid, it offers excellent performance. ISO-compliant.\u003c\/p\u003e","brand":"TreeD","offers":[{"title":"Default Title","offer_id":56893910942040,"sku":"PPSCF-9011-750-175","price":158.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/pps-cf-o-175-mm-750g-treed-filaments.jpg?v=1791992771"},{"product_id":"petgforce-1-75mm-1kg-noir-charges-speciaux","title":"PETG Carbon","description":"\u003cp style=\"text-align: justify;\"\u003ePETG Carbon is a composite filament with a PETG matrix filled with 20 % short carbon fibres, formulated and extruded in Morocco by TAGin3D. The fibres increase the stiffness and dimensional stability of PETG and greatly reduce part warping, while retaining its heat resistance stated up to 80 °C and its good chemical resistance.\u003cbr\u003e\u003cbr\u003eIt is intended for light and rigid structural parts in hot or chemical environments: brackets and fasteners, housings and extraction ducts, jigs and production tooling, sensor mounts, drone frames. These applications remain within reach without moving to materials that are more demanding to print, such as nylon or PC.\u003c\/p\u003e\n\u003ch2\u003eNozzle and surface finish\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eCarbon fibres are abrasive: a hardened steel nozzle is the minimum requirement, a brass nozzle wears out within a few tens of grams. The manufacturer recommends a 0.6 or 0.8 mm diameter, and a tungsten carbide nozzle for series production.\u003cbr\u003e\u003cbr\u003eParts come out with a matte, textured finish resulting from the fibre filler. As PETG is slightly hygroscopic, the spool should be stored in a dry place, in a closed container with desiccant bags.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003ePETG filled with short carbon fibres (20 %)\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eColour\u003c\/th\u003e\u003ctd\u003eBlack\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003ePackaging\u003c\/th\u003e\u003ctd\u003e1 kg\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eHeat resistance\u003c\/th\u003e\u003ctd\u003eUp to 80 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\u003ctd\u003e245 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\u003ctd\u003e65 °C\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eFinish\u003c\/th\u003e\u003ctd\u003eMatte textured\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eNozzle\u003c\/th\u003e\u003ctd\u003eHardened steel minimum, 0.6 or 0.8 mm\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eStorage\u003c\/th\u003e\u003ctd\u003eDry, closed container with desiccant\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003cth\u003eManufacturing\u003c\/th\u003e\u003ctd\u003eMorocco\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFDM 3D printers using 1.75 mm filament\u003c\/li\u003e\n\u003cli\u003eHardened steel, ruby or tungsten carbide nozzle required, brass nozzle excluded\u003c\/li\u003e\n\u003cli\u003ePrusa, Volumic 3D printers fitted with a steel nozzle\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tag 3D","offers":[{"title":"Noir \/ 2.2 lbs \/ 1.75 mm","offer_id":57385026093400,"sku":"TAFT3070","price":79.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/image_1920.webp?v=1790156602"},{"product_id":"filament-petg-fast-forward-treed-noir","title":"TreeD PETG Fast Forward Filament","description":"\u003ch2\u003eProperties and applications\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003ePETG Fast Forward is a PETG formulated for fast printing, keeping the ease of use of PETG while supporting high deposition speeds. It offers a good balance between mechanical strength, chemical resistance and printing simplicity.\u003cbr\u003e\u003cbr\u003eTypical applications: functional prototyping, workshop jigs, short production runs.\u003c\/p\u003e\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eLike any PETG, it is moisture sensitive and requires dry storage. A heated bed is required.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g and 1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eBlack, White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eTreeD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eFDM 3D printers with a heated bed\u003c\/li\u003e\u003c\/ul\u003e","brand":"TreeD","offers":[{"title":"Noir \/ 1 kg \/ 1.75 mm","offer_id":56893918806360,"sku":"PETGFF-9005-1000-175","price":24.0,"currency_code":"EUR","in_stock":true},{"title":"Blanc \/ 1 kg \/ 1.75 mm","offer_id":58537476161880,"sku":"PETGFF-9003-1000-175","price":24.0,"currency_code":"EUR","in_stock":true},{"title":"Transparent Clear \/ 1 kg \/ 1.75 mm","offer_id":58598034080088,"sku":"PETGFF-0190-1000-175","price":24.0,"currency_code":"EUR","in_stock":true},{"title":"Noir \/ 5 kg \/ 1.75 mm","offer_id":58685723050328,"sku":"GPET-9005-5000-175","price":120.0,"currency_code":"EUR","in_stock":true},{"title":"Bleu \/ 1 kg \/ 1.75 mm","offer_id":58685803790680,"sku":"GPET-5002-1000-175","price":24.0,"currency_code":"EUR","in_stock":true},{"title":"Rouge \/ 1 kg \/ 1.75 mm","offer_id":58685803823448,"sku":"GPET-3003-1000-175","price":24.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2024_05_treed-3.jpg?v=1775256978"},{"product_id":"filament-pps-gf-25-treed-noir","title":"TreeD PPS GF 25 Filament Black","description":"\u003ch2\u003ePropriétés et applications\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eLe PPS GF 25 est un polysulfure de phénylène chargé à 25 % de fibres de verre. Le renfort verre apporte rigidité et stabilité dimensionnelle, tandis que la matrice PPS assure une tenue en température élevée et une excellente résistance chimique.\u003cbr\u003e\u003cbr\u003eApplications typiques : pièces industrielles exposées aux solvants, supports techniques, outillage sous contrainte thermique.\u003c\/p\u003e\u003ch2\u003eComportement à l'impression\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eLe PPS demande une buse haute température et une enceinte chauffée. Le renfort verre étant abrasif, une buse durcie est indispensable.\u003c\/p\u003e\u003ch2\u003eSpécifications techniques\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMatière\u003c\/th\u003e\n\u003ctd\u003ePPS chargé fibre de verre 25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiamètre\u003c\/th\u003e\n\u003ctd\u003e1,75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConditionnement\u003c\/th\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColoris\u003c\/th\u003e\n\u003ctd\u003eNoir\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMarque\u003c\/th\u003e\n\u003ctd\u003eTreeD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eCompatibilité\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eImprimantes FDM haute température avec enceinte chauffée\u003c\/li\u003e\n\u003cli\u003eBuse durcie obligatoire\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TreeD","offers":[{"title":"Default Title","offer_id":56893924049240,"sku":"PPSGF-9005-750-175","price":142.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2024_05_treed-3_f1e6f23e-c867-440e-b533-6b867d37f611.jpg?v=1775256968"},{"product_id":"silk-ultra-1kg-aluminium","title":"SILK Ultra","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA SILK Ultra prints at 210 °C on a lacquered build plate heated to 50 °C, without an enclosed chamber. Rated \"easy\" in terms of difficulty, it accepts any nozzle type and exhibits strong adhesion on lacquered build plates, simplifying first-layer initiation and limiting warping defects.\u003cbr\u003e\u003cbr\u003eUnlike the standard PLA Ultra range, the SILK formulation does not support post-treatment by annealing: parts retain the mechanical properties of a standard PLA. For parts requiring high thermal resistance, a recurable Ultra reference from the range should be preferred.\u003c\/p\u003e\n\u003ch2\u003eApplications and surface finish\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe SILK formulation produces a bright metallic effect with anisotropic highlights, particularly suited to decorative parts, architectural models, communication prototypes, commercial presentations, design objects, and interior furnishing elements. The surface finish, described as excellent by the manufacturer, partially masks layer lines when lighting plays on the orientation of layers, and remains consistent across the entire spool for large-format prints.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA (polylactic acid) with metallic effect\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003ctd\u003ePLA Ultra SILK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate type\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty level\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent, brushed metallic effect\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnnealing\u003c\/th\u003e\n\u003ctd\u003eNot recommended for the SILK range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting PLA\u003c\/li\u003e\n  \u003cli\u003eCompatible with any nozzle type (brass, hardened steel, hardened)\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream printers on lacquered build plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ 1.75 mm \/ Aluminium","offer_id":57383979614552,"sku":"SPEC5399","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/silk-ultra-1kg-aluminium-3.jpg?v=1779919587"},{"product_id":"hardflex-ultra-750g-noir","title":"HARDFLEX Ultra","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHARDFLEX Ultra prints at 235 °C on a build plate heated to 95 °C. Its Shore 83D hardness places it in the category of rigid TPUs, closer to a technical thermoplastic than a soft elastomer: extrusion is more stable than with Shore A TPUs, which simplifies passage through the melt chamber and allows use on a broader range of extruders.\u003cbr\u003e\u003cbr\u003eThe requirement for a heavily heated build plate does however mean the machine must be equipped with a high-temperature heated bed and, preferably, a stabilised enclosure to limit thermal differentials during printing of large parts.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eA proven production-oriented formulation, this rigid TPU combines mechanical strength and thermal resistance for functional parts subject to repeated constraints: hard damping elements, technical stops, wear parts, structural supports, jigs, and industrial components requiring a combination of impact resistance and rigidity. It complements a range of Shore A flexible materials by providing significantly greater hardness, intermediate between standard TPUs and engineering thermoplastics.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPU (thermoplastic polyurethane), rigid variant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 83D\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeated build plate\u003c\/th\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM printers accepting extrusion at 235 °C\u003c\/li\u003e\n  \u003cli\u003eHeated build plate capable of reaching 95 °C\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream printers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Noir \/ 0.75 kg \/ 1.75 mm","offer_id":57383972372824,"sku":"SPEC3623","price":41.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/hardflex-ultra-750g-noir-3.jpg?v=1779919237"},{"product_id":"volumic-universal-ultra","title":"UNIVERSAL Ultra PLC – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eUNIVERSAL ULTRA is a composite filament based on polylactic acid compound (PLC – Polylactic Acid Compound) developed by Volumic, positioned as a versatile material covering most workshop requirements in a single consumable. It combines the ease of processing of traditional PLA with a significantly higher level of mechanical and thermal performance: sustained mechanical strength, high rigidity, thermal resistance up to 160 °C peak and 115 °C continuous.\u003cbr\u003e\u003cbr\u003eThe material is also FDA-approved for food contact (to be validated according to the intended application) and remains biodegradable, two advantages directly exploitable in container prototyping, laboratory equipment, and short-life functional parts. Multiple colours are available in the range.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUNIVERSAL ULTRA prints at a recommended nozzle temperature of 225 °C on a heated build plate at 60 °C, and is compatible with all nozzle materials (brass, copper\/nickel, steel). Its build plate adhesion is rated ultra-strong, to be used on a very lightly lacquered build plate to preserve ease of removal at the end of printing. The processing difficulty is rated \"very easy\" by the manufacturer, making it a suitable consumable even for beginner operators or multi-machine production lines requiring a robust consumable without complex parameter configuration.\u003c\/p\u003e\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with desiccant after opening, to preserve extrusion properties. Technical data sheet and safety data sheet (MSDS \/ SDS) available from the distributor for integration into HSE procedures and workshop documentation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLC – Polylactic Acid Compound (technical PLA composite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg or 2.3 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 160 °C peak \/ 115 °C continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll (brass, copper\/nickel, steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eUltra-strong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eVery lightly lacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eVery easy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial characteristics\u003c\/th\u003e\n\u003ctd\u003eHigh mechanical strength, high rigidity, biodegradable, FDA food-contact approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable documentation\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS \/ SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n\u003cli\u003eOptimised for Volumic Stream, SH, and EXO printers\u003c\/li\u003e\n\u003cli\u003eCompatible with professional FDM printers capable of printing technical PLA (Prusa, Bambu Lab, Creality, etc.)\u003c\/li\u003e\n\u003cli\u003eApplications: functional prototyping, common mechanical parts, workshop jigs, containers and laboratory equipment (FDA validation according to use), parts requiring moderate thermal resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Black \/ 1000","offer_id":56893927784792,"sku":"UNIV1130","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"White \/ 1000","offer_id":56893927850328,"sku":"UNIV3047","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Money \/ 1000","offer_id":56893928145240,"sku":"UNIV1128","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Blue \/ 1000","offer_id":56893927915864,"sku":"UNIV1127","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Yellow \/ 1000","offer_id":56893927981400,"sku":"UNIV3048","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Natural \/ 1000","offer_id":56893928014168,"sku":"UNIV1129","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Red \/ 1000","offer_id":56893928046936,"sku":"UNIV1126","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Green \/ 1000","offer_id":56893928079704,"sku":"UNIV3049","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Black \/ 2300","offer_id":56893927817560,"sku":"UNIV5628","price":109.0,"currency_code":"EUR","in_stock":true},{"title":"Money \/ 2300","offer_id":56893927883096,"sku":"UNIV5630","price":109.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/universal-ultra-1kg-noir-3.jpg?v=1779781330"},{"product_id":"filament-filaflex-60a-recreus-black","title":"Filaflex 60A","description":"\u003ch2\u003eProperties\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFilaflex is a polyurethane-based TPE (thermoplastic elastomer), with additives that make it easier to print. With a Shore 60A hardness, it is the softest point of the range, offering an elongation of around 700 % that allows highly elastic parts to be produced.\u003cbr\u003e\u003cbr\u003eThis extreme softness requires a specific extruder suited to flexible materials for the filament to extrude correctly.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFilaflex 60A prints at a recommended nozzle temperature of 235 °C, on a bed at 45 °C, with a brass or copper nozzle. Its high softness makes it a difficult material to print, with a finish rated as good.\u003cbr\u003e\u003cbr\u003eBed adhesion is strong; a lacquered build plate is recommended.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPE (polyurethane base), flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eRecreus\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eSpain\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 60A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation\u003c\/th\u003e\n\u003ctd\u003eAround 700 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1,75 mm or 2,85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eDifficult\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eBrass\/copper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eBlack, White, Nude\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e500 g or 3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF 3D printers equipped with a heated bed\u003c\/li\u003e\n  \u003cli\u003eExtruder specific to flexible materials required\u003c\/li\u003e\n  \u003cli\u003eBrass or copper nozzle (unfilled, non-abrasive material)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Recreus","offers":[{"title":"0.5 kg \/ Noir \/ 1.75 mm","offer_id":57383718289752,"sku":"60AFBLACK175500","price":41.24,"currency_code":"EUR","in_stock":true},{"title":"0.5 kg \/ Noir \/ 2.85 mm","offer_id":58614162096472,"sku":"60AFBLACK285500","price":41.24,"currency_code":"EUR","in_stock":true},{"title":"3 kg \/ Noir \/ 1.75 mm","offer_id":58614162129240,"sku":"60AFBLACK1753000","price":180.9,"currency_code":"EUR","in_stock":true},{"title":"3 kg \/ Noir \/ 2.85 mm","offer_id":58614162162008,"sku":"60AFBLACK2853000","price":180.9,"currency_code":"EUR","in_stock":true},{"title":"0.5 kg \/ Blanc \/ 1.75 mm","offer_id":58614162194776,"sku":"60AFWHITE175500","price":41.24,"currency_code":"EUR","in_stock":true},{"title":"0.5 kg \/ Blanc \/ 2.85 mm","offer_id":58614162227544,"sku":"60AFWHITE285500","price":41.24,"currency_code":"EUR","in_stock":true},{"title":"3 kg \/ Blanc \/ 1.75 mm","offer_id":58614162260312,"sku":"60AFWHITE1753000","price":180.9,"currency_code":"EUR","in_stock":true},{"title":"3 kg \/ Blanc \/ 2.85 mm","offer_id":58614162293080,"sku":"60AFWHITE2853000","price":180.9,"currency_code":"EUR","in_stock":true},{"title":"0.5 kg \/ Nude \/ 1.75 mm","offer_id":58614162325848,"sku":"60AFNUDE175500","price":41.24,"currency_code":"EUR","in_stock":true},{"title":"0.5 kg \/ Nude \/ 2.85 mm","offer_id":58614162358616,"sku":"60AFNUDE285500","price":41.24,"currency_code":"EUR","in_stock":true},{"title":"3 kg \/ Nude \/ 1.75 mm","offer_id":58614162391384,"sku":"60AFNUDE1753000","price":180.9,"currency_code":"EUR","in_stock":true},{"title":"3 kg \/ Nude \/ 2.85 mm","offer_id":58614162424152,"sku":"60AFNUDE2853000","price":180.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2024_05_filaflex-60a-1.jpg?v=1775253368"},{"product_id":"filament-pc-pbt-gf-treed-dark-grey","title":"TreeD PC PBT GF Filament – Dark Grey","description":"\u003cp\u003ePCPBT GF glass fibre-reinforced filament \"DimensionMaster\" — Discover our PCPBT filament with high-quality glass fibres. Through our precise blending process, we guarantee uniform fibre distribution throughout the polymer, achieving superior mechanical strength and dimensional stability compared to competitors' filaments. We use only high-quality additives and glass fibres, delivering superior mechanical, thermal, and chemical resistance properties. We offer the widest range of filament colours and diameters to meet the needs of a broader customer base. Our attention to filament quality control ensures that every spool meets the required technical specifications and is ready for 3D printing.\u003c\/p\u003e","brand":"TreeD","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Grey","offer_id":57518434615640,"sku":"PCPBTGF-7016-750-175","price":41.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PCPBTGF.jpg?v=1781528665"},{"product_id":"basf-ultrafuse-tpu-85a-transparent-1-75mm-750g","title":"Forward AM Ultrafuse TPU 85A Transparent","description":"\u003ch2\u003eProperties\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis Shore 85A TPU combines hydrolysis resistance, flexibility at low temperature, resistance to microbiological attack, tensile strength, damping behaviour, and resistance to wear, abrasion and slipping.\u003cbr\u003e\u003cbr\u003eThese properties make it a suitable material for applications in sport and leisure, automotive, industrial manufacturing, agriculture and construction.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour and drying\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUltrafuse TPU 85A prints at a temperature between 200 and 220 °C, on a glass bed at 40 °C. It can be printed without prior oven drying, but the manufacturer recommends drying at 70 °C for 2 to 8 hours in a hot-air dryer to limit stringing, or at 80 °C for 5 hours in a vacuum oven for optimal printing and the best mechanical properties.\u003cbr\u003e\u003cbr\u003eThis filament prints on most 3D printers; particular attention is however required regarding the filament drive system, which must be suited to flexible materials.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPU (thermoplastic polyurethane), flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eForward AM (Ultrafuse)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 85A\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e200 to 220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed type\u003c\/th\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended drying\u003c\/th\u003e\n\u003ctd\u003e70 °C \/ 2-8 h (hot air) or 80 °C \/ 5 h (vacuum oven)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF 3D printers, most models\u003c\/li\u003e\n  \u003cli\u003eDrive system suited to flexible filaments recommended\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forward AM","offers":[{"title":"1.65 lbs \/ 1.75 mm","offer_id":57380385063256,"sku":"BA5089","price":40.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Ultrafuse_TPU85ANatural_2.85mm_750g-600x600.png?v=1779891406"},{"product_id":"filament-treed-pc-pbt-b-mat-noir","title":"TreeD PC PBT B-mat","description":"\u003cp\u003e1kg - 1.75mm\u003c\/p\u003e","brand":"TreeD","offers":[{"title":"1 kg \/ Noir \/ 1.75 mm","offer_id":56943522808152,"sku":"BMAT-9005-1000-175","price":48.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/b-mat-pcpbt-o-175-mm-1kg-treed-filaments.jpg?v=1791992688"},{"product_id":"volumic-flex-ultra-750g","title":"Flex93 Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eFlex93 ULTRA is a flexible TPU (Thermoplastic PolyUrethane) filament developed by Volumic, with a Shore hardness of 93A. Its distinguishing feature is an extrusion behaviour optimised for high print speeds: it prints at up to 60 mm\/s, on a par with standard PLA, whereas most flexible materials require a significant speed reduction to avoid flow defects.\u003cbr\u003e\u003cbr\u003eIts Shore 93A hardness places it in the semi-rigid TPU category, suited to parts requiring a combination of flexibility, tear resistance, and fatigue strength: seals, shock absorbers, bellows, ergonomic prototypes, protective covers, technical soles. Multiple colours are available in the range.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFlex93 ULTRA prints at a recommended nozzle temperature of 235 °C on a heated build plate at 45 °C, with a brass or copper nozzle. Its strong build plate adhesion allows printing directly on a clean or lacquered build plate (lacquer such as 3DLac) without complex preparation, and its processing difficulty is rated \"easy\" by the manufacturer, making it an accessible consumable even for operators not specialised in flexible materials.\u003c\/p\u003e\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eTPU is hygroscopic: store the spool in a dry environment, in a resealable bag with desiccant, to preserve extrusion properties after opening. Technical data sheet and safety data sheet (MSDS \/ SDS) available from the distributor for integration into HSE procedures and workshop documentation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPU (Thermoplastic PolyUrethane) – flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 93A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eBrass or copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003eUp to 60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eClean build plate or lacquered build plate (3DLac)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable documentation\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS \/ SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll 1.75 mm FDM printers capable of printing TPU\/flexible filaments\u003c\/li\u003e\n\u003cli\u003eOptimised for Volumic Stream, SH, and EXO printers\u003c\/li\u003e\n\u003cli\u003eCompatible with professional FDM printers equipped with a Direct Drive extruder\u003c\/li\u003e\n\u003cli\u003eApplications: seals, shock absorbers, bellows, ergonomic prototypes, protective covers, technical flexible parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Red \/ 750","offer_id":57001246720344,"sku":"FLXV1067","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"Blue \/ 750","offer_id":57001246753112,"sku":"FLXV1068","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"Black \/ 750","offer_id":57001246785880,"sku":"FLXV968","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"Green \/ 750","offer_id":57001246818648,"sku":"FLXV967","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/flex93-ultra-750g-rouge-3.jpg?v=1779779836"},{"product_id":"prusament-petg-900g-refill-nfc-compatible","title":"Prusament PETG 900 g Refill (NFC Compatible)","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PETG prints at 250 °C (± 10 °C) on a bed heated to 80 °C (± 10 °C), with a 0.4 mm brass nozzle recommended. Easy to work with, it suits beginners and professionals alike, with low shrinkage and little warping, which makes it possible to print large objects, including parts assembled from several glued elements.\u003cbr\u003e\u003cbr\u003eIts glossy surface can accentuate imperfections, and the material is sensitive to moisture, with a risk of stringing that requires occasional drying. It is also poorly suited to bridges.\u003c\/p\u003e\n\n\u003ch2\u003eProperties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eDurable in thick layers and flexible in thin layers, PETG bends or deforms slightly on impact rather than breaking. Compared with PLA, it offers better impact resistance, better interlayer adhesion and better resistance to high temperatures, while remaining easier to sand.\u003cbr\u003e\u003cbr\u003eIt is suitable for rapid prototyping and functional mechanical components. Its strength nevertheless remains lower than that of more advanced materials such as PC Blend.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (tolerance ± 0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e250 °C (± 10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e80 °C (± 10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\u003ctd\u003eBrass, 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended steel sheet\u003c\/th\u003e\n\u003ctd\u003eTextured, satin or PP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFormat\u003c\/th\u003e\n\u003ctd\u003eRefill, without spool sides\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll Prusa FDM 3D printers\u003c\/li\u003e\n  \u003cli\u003eStandard 0.4 mm brass nozzle\u003c\/li\u003e\n  \u003cli\u003eSides of an empty Prusament spool, to be attached to the refill\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Anthracite Grey","offer_id":57202747343192,"sku":"IDS:3546","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Jet Black","offer_id":57202747375960,"sku":"IDS:3542","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Urban Grey","offer_id":57202747408728,"sku":"IDS:3544","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Clear","offer_id":57202747441496,"sku":"IDS:3547","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Signal White","offer_id":57202747474264,"sku":"IDS:3543","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Black","offer_id":57272955240792,"sku":"IDS:3545","price":23.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/61e65595-f5f6-467a-951a-882210fc0adb.jpg?v=1778574594"},{"product_id":"prusament-pla-nfc","title":"Prusament PLA (NFC)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA is a filament manufactured in-house by Prusa Research at its factories in the Czech Republic and Delaware. It is available in a wide palette of colours, including solid matt to satin shades, multi-pigment blends, and glitter-effect variants. Each spool is inspected to meet a dimensional tolerance of ±0.02 mm, with continuous measurement of diameter and ovality along the entire length. Actual manufacturing data (diameter readings, ovality, weight) are recorded and provided per batch, enabling full spool traceability. Colour consistency is guaranteed by a documented spectroscopic recipe and per-batch inspection before despatch.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA extrudes at 215 °C on a heated build plate between 50 and 60 °C, without the need for an enclosed chamber. Its limited shrinkage allows the printing of large or multi-part assemblies without significant deformation, as well as the reproduction of fine geometries, bridges, and overhangs thanks to low-temperature melting combined with rapid cooling. For parts subject to mechanical stress or exposed to elevated temperatures, PETG, ASA, or a PC Blend remains preferable. The material is hard and difficult to sand.\u003c\/p\u003e\n\u003ch2\u003eSpool and NFC identification\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament is delivered on a redesigned spool incorporating a rewritable NFC tag to the open OpenPrintTag standard. This tag contains essential material information and can be read by the Prusa mobile app in offline mode, without dependency on a cloud service. The spool is produced under controlled tension winding and undergoes a final inspection before despatch.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available (solids, blends, glitter effect)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended print sheet\u003c\/th\u003e\n\u003ctd\u003eSmooth PEI, textured, or satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\u003ctd\u003e0.4 mm brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing origin\u003c\/th\u003e\n\u003ctd\u003eCzech Republic \/ Delaware (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n\u003cli\u003ePrint profiles supported for all Prusa FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eNFC tag reading via the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Anthracite Grey \/ 1 kg \/ 1.75 mm","offer_id":57387823563096,"sku":"IDS:3443","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Pristine White \/ 1 kg \/ 1.75 mm","offer_id":57387823595864,"sku":"IDS:3428","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Pristine White \/ 2 kg \/ 1.75 mm","offer_id":57387824316760,"sku":"IDS:3435","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Prusa Orange \/ 1 kg \/ 1.75 mm","offer_id":57387823628632,"sku":"IDS:3416","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Prusa Orange \/ 2 kg \/ 1.75 mm","offer_id":57387824349528,"sku":"IDS:3439","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Jet Black \/ 1 kg \/ 1.75 mm","offer_id":57387823661400,"sku":"IDS:3414","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Jet Black \/ 2 kg \/ 1.75 mm","offer_id":57387824382296,"sku":"IDS:3438","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Lipstick Red \/ 1 kg \/ 1.75 mm","offer_id":57387823726936,"sku":"IDS:3404","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Lipstick Red \/ 2 kg \/ 1.75 mm","offer_id":57387824415064,"sku":"IDS:3430","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Azure Blue \/ 1 kg \/ 1.75 mm","offer_id":57387823759704,"sku":"IDS:3405","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Azure Blue \/ 2 kg \/ 1.75 mm","offer_id":57387824447832,"sku":"IDS:3434","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Army Green \/ 2 kg \/ 1.75 mm","offer_id":57387824480600,"sku":"IDS:3431","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Gravity Grey \/ 1 kg \/ 1.75 mm","offer_id":57387823956312,"sku":"IDS:3422","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Gravity Grey \/ 2 kg \/ 1.75 mm","offer_id":57387824513368,"sku":"IDS:3437","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Purple \/ 1 kg \/ 1.75 mm","offer_id":57454177354072,"sku":"IDS:3413","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Purple \/ 2 kg \/ 1.75 mm","offer_id":57454177550680,"sku":"IDS:3432","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Black \/ 1 kg \/ 1.75 mm","offer_id":57454177386840,"sku":"IDS:3402","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Black \/ 2 kg \/ 1.75 mm","offer_id":57454177583448,"sku":"IDS:3429","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"Opal Green \/ 1 kg \/ 1.75 mm","offer_id":57454177419608,"sku":"IDS:3415","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Silver \/ 1 kg \/ 1.75 mm","offer_id":57454177452376,"sku":"IDS:3403","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Green \/ 1 kg \/ 1.75 mm","offer_id":57454177485144,"sku":"IDS:3427","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Marble Grey \/ 1 kg \/ 1.75 mm","offer_id":57454177517912,"sku":"IDS:3426","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"Mystic Green \/ 1 kg \/ 1.75 mm","offer_id":58443393532248,"sku":"IDS:3567","price":27.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF__18754_IDS__3443.jpg?v=1779971019"},{"product_id":"prusament-petg-carbon-fiber-black-nfc","title":"Prusament PETG Carbon Fibre Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG Carbon Fiber Black is a carbon-fibre-reinforced PETG filament manufactured in-house by Prusa Research in the Czech Republic. The carbon fibre fill improves dimensional stability, temperature resistance and elastic modulus compared with standard PETG, while also significantly reducing stringing.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.02 mm on diameter, monitored at the exit of the extrusion line. The incorporated carbon fibres originate from the recycling of industrial waste and end-of-life carbon composites.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG-CF extrudes at 265 °C on a heated build plate at 90 °C, with a textured or satin sheet recommended for adhesion. As the material is abrasive, a hardened nozzle is required to avoid premature wear of the extrusion tip.\u003cbr\u003e\u003cbr\u003ePrinting is virtually odourless and interlayer adhesion remains strong. The surface finish is matt black. Detail resolution is lower than PLA, and raw mechanical strength is slightly lower than unfilled PETG — the usual trade-off for a carbon-filled composite.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and packaging\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament spools incorporate a rewritable NFC tag compliant with the OpenPrintTag standard, designed to operate offline across different printer ecosystems. Material data is stored directly on the tag and readable via the Prusa mobile app. The redesigned, more compact spool features a locking mechanism that facilitates use in multi-material systems and filament drying.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-reinforced PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e265 °C (±10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e90 °C (±10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eTextured or satin sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003eHardened nozzle required (abrasive material)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eMatt black\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFibre origin\u003c\/th\u003e\n\u003ctd\u003eRecycling of industrial waste and end-of-life carbon composites\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable NFC tag (OpenPrintTag standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003ePrusa Research, Czech Republic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened nozzle\u003c\/li\u003e\n  \u003cli\u003eOptimised for Prusa Research printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-material and multicolour printing systems\u003c\/li\u003e\n  \u003cli\u003eNFC tag compatible with the OpenPrintTag standard (multi-brand reading)\u003c\/li\u003e\n  \u003cli\u003eTag reading via the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm","offer_id":57284898488664,"sku":"IDS:3504","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusapetgcarbon.jpg?v=1778684059"},{"product_id":"prusament-petg-nfc","title":"Prusament PETG (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG is a professional filament manufactured in-house by Prusa Research in the Czech Republic, available in several opaque and transparent colours. Each spool meets a controlled dimensional tolerance of ±0.02 mm throughout production, guaranteeing consistent extrusion on 1.75 mm FDM printers.\u003cbr\u003e\u003cbr\u003ePETG (polyethylene terephthalate glycol) combines the mechanical strength and durability of a technical polyester with processing characteristics close to PLA: low shrinkage, low thermal deformation, and good interlayer adhesion. More flexible and less brittle than PLA, it offers a slight flex that is useful for parts subject to stress or moderate impact.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 250 ±10 °C on a heated build plate at 80 ±10 °C, without the need for an enclosed chamber. Its very low shrinkage allows the printing of large parts without risk of detachment or warping. The high interlayer adhesion makes it suited to functional parts subject to mechanical stress, technical supports, and applications requiring indoor or outdoor sealing.\u003cbr\u003e\u003cbr\u003ePETG exhibits a tendency to string: pre-drying the filament and appropriate retraction settings help limit this phenomenon. The reproduction of fine details remains inferior to PLA and long bridges are less well controlled. Conversely, the material sands more easily than PLA during post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSpools are fitted with a fully rewritable OpenPrintTag NFC tag, storing material data offline and usable by compatible printers or via the Prusa mobile app. A QR code on the spool gives access to production parameters for each batch (measured tolerance, batch number, manufacturing date) on prusament.com, for complete traceability in series production.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG (polyethylene terephthalate glycol)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e80 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eTextured or satin steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple shades, opaque and transparent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003eIn-house Prusa Research production (Czech Republic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Prusa Research range: MK3S+, MK4, MK4S, MINI+, XL, CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with multicolour and multi-material printing systems accepting the redesigned Prusament spool\u003c\/li\u003e\n  \u003cli\u003eNFC reading compatible with printers supporting the OpenPrintTag standard and the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530342232,"sku":"IDS:3450","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549478744,"sku":"IDS:3448","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616358232,"sku":"IDS:3449","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Signal White \/ 1.75 mm","offer_id":57296716497240,"sku":"IDS:3458","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Lipstick Red \/ 1.75 mm","offer_id":57296793600344,"sku":"IDS:3467","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Matte Black \/ 1.75 mm","offer_id":57296819814744,"sku":"IDS:3469","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Mango Yellow \/ 1.75 mm","offer_id":57297417601368,"sku":"IDS:3463","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57544658452824,"sku":"IDS:3455","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Clear \/ 1.75 mm","offer_id":57544839201112,"sku":"IDS:3456","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange Transparent \/ 1.75 mm","offer_id":57544839299416,"sku":"IDS:3468","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530375000,"sku":"IDS:3472","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549511512,"sku":"IDS:3470","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616391000,"sku":"IDS:3471","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Anthracite Grey \/ 1.75 mm","offer_id":57299100598616,"sku":"IDS:3475","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Signal White \/ 1.75 mm","offer_id":57296716530008,"sku":"IDS:3473","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57544658583896,"sku":"IDS:3945","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Clear \/ 1.75 mm","offer_id":57544839332184,"sku":"IDS:3474","price":45.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_petg_urban_grey_1kg.jpg?v=1778828573"},{"product_id":"extrudr-greentec-pro","title":"extrudr GreenTEC Pro","description":"\u003cp style=\"text-align: justify;\"\u003eGreenTEC PRO from Extrudr is a biopolymer filament from the Austrian manufacturer's BIO-Performance range, formulated for demanding technical applications. It combines good mechanical strength, low cooling shrinkage and a matt surface finish suited to the production of functional and aesthetic FDM parts.\u003cbr\u003e\u003cbr\u003eThe material is odourless during extrusion, compliant for food contact applications under FDA standards, and biodegradable to DIN EN ISO 14855. The filament is available in several colours to cover both prototyping and series production requirements.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eGreenTEC PRO prints over a wide temperature range, from 190 to 250 °C, at speeds of up to 120 mm\/s. A heated build plate is not mandatory but can be set up to 90 °C to improve first-layer adhesion. Cooling shrinkage remains low, which limits warping on large parts.\u003cbr\u003e\u003cbr\u003eInterlayer adhesion is high: in bending, failure propagates transversely across layers rather than by delamination. Processing is accessible to operators with basic FDM knowledge and proves simpler than technical polymers such as PC, ABS or PEEK.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe material offers medium hardness combined with slight flexibility, giving it an impact resistance suited to functional parts under moderate loading. Its heat deflection resistance of up to 160 °C extends the application range beyond standard biopolymers. The matt surface minimises layer-line visibility and reduces post-processing operations on parts intended for end use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTechnical biopolymer (BIO-Performance range)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e800 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e190–250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e0–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e40–120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat deflection resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 160 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFood contact\u003c\/th\u003e\n\u003ctd\u003eFDA compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiodegradability\u003c\/th\u003e\n\u003ctd\u003eCompliant with DIN EN ISO 14855\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a nozzle capable of reaching 250 °C\u003c\/li\u003e\n  \u003cli\u003ePrinters with or without a heated build plate (0 to 90 °C range)\u003c\/li\u003e\n  \u003cli\u003eSuited to both open-frame and enclosed configurations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ Nature \/ 1.75 mm","offer_id":57299799310680,"sku":"9010241426034","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Noir \/ 1.75 mm","offer_id":57299799343448,"sku":"9010241426027","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Blanc \/ 1.75 mm","offer_id":57299799376216,"sku":"9010241426010","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Anthracite \/ 1.75 mm","offer_id":57299799408984,"sku":"9010241426065","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Argent \/ 1.75 mm","offer_id":57299799441752,"sku":"9010241426089","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Bleu \/ 1.75 mm","offer_id":57299799474520,"sku":"9010241426140","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Rouge \/ 1.75 mm","offer_id":57299799507288,"sku":"9010241426263","price":37.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extrudr_800g_nature.png?v=1778849706"},{"product_id":"extrudr-greentec-pro-carbon","title":"extrudr GreenTEC Pro Carbon","description":"\u003cp style=\"text-align: justify;\"\u003eGreenTEC Pro Carbon from Extrudr is a composite filament combining the GreenTEC Pro biopolymer matrix with carbon fibre reinforcement. The matrix is derived from renewable raw materials and is biodegradable, while the fibre fill adds rigidity and dimensional stability for low specific weight.\u003cbr\u003e\u003cbr\u003eThe formulation targets technical applications inspired by motorsport, aeronautics, aerospace and medical: lightweight structural parts, jigs, instrument supports and functional prototypes. The material complies with REACH and RoHS regulations.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrinting is carried out in the 200–240 °C range, with a recommended temperature between 230 and 240 °C to preserve interlayer adhesion. Below 230 °C, interlayer cohesion degrades noticeably. The manufacturer recommends printing a heat tower at the start of each batch to dial in the optimal settings for each machine.\u003cbr\u003e\u003cbr\u003eThe carbon fibre fill is abrasive and requires the use of a hardened nozzle of at least 0.5 mm. The fibre also stabilises the molten material during bridging phases and limits shrinkage, making processing accessible to operators with limited composite experience.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe fibre reinforcement gives the material high rigidity and good compressive load resistance, complemented by notable impact strength. Heat deflection resistance reaches 165 °C (Vicat VST), with UV stability comparable to ASA, opening use to functional parts exposed outdoors or in hot environments. The resulting surface is matt, with fibre orientation reducing layer-line visibility and masking layer irregularities, which reduces post-processing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-reinforced biopolymer (carbon\/glass composite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e800 g spool (0.8 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint temperature range\u003c\/th\u003e\n\u003ctd\u003e200–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended temperature\u003c\/th\u003e\n\u003ctd\u003e230–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat resistance (Vicat VST)\u003c\/th\u003e\n\u003ctd\u003e165 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV stability\u003c\/th\u003e\n\u003ctd\u003eComparable to ASA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\u003ctd\u003eHardened nozzle, minimum 0.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRaw material origin\u003c\/th\u003e\n\u003ctd\u003eRenewable raw materials, biodegradable matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH and RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-frame or enclosed FDM printers\u003c\/li\u003e\n\u003cli\u003eMachines accepting a nozzle temperature up to 240 °C\u003c\/li\u003e\n\u003cli\u003eDirect drive or Bowden extruder configuration\u003c\/li\u003e\n\u003cli\u003eHardened nozzle (hardened steel, ruby, carbide) with a minimum diameter of 0.5 mm required to handle the abrasive nature of the carbon fill\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57300000145752,"sku":"9010241426973","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extrudr_800g_carbon.png?v=1778853270"},{"product_id":"extrudr-petg","title":"extrudr PETG","description":"\u003cp style=\"text-align: justify;\"\u003ePETG from Extrudr is a technical filament formulated specifically for FDM\/FFF processes, targeting functional applications subject to significant mechanical stress. Its formulation combines high chemical resistance, limited cooling shrinkage, and FDA compliance, covering both electronic component manufacturing and food-contact parts.\u003cbr\u003e\u003cbr\u003eThe material is 100 % recyclable, and several colours are available to incorporate aesthetic requirements into prototyping and short-run projects. The visual surface offers the translucent finish characteristic of well-extruded PETG.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints between 190 and 230 °C, with a build plate up to 90 °C, at speeds of 60 to 120 mm\/s. Interlayer adhesion is high when the print temperature is sufficient and part cooling is controlled. The material is aimed at operators with a basic knowledge of FDM.\u003cbr\u003e\u003cbr\u003eFor large parts (beyond approximately 10 × 10 × 10 cm), a heated build plate and an enclosed chamber are recommended to limit lifting and ensure dimensional stability throughout the print session.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG combines good rigidity with slight flexibility, giving it high impact resistance and a progressive failure behaviour. Its heat deflection resistance of 80–90 °C allows use in the production of electronic components, technical utensils and fitout parts. The broad chemical resistance and FDA food-contact compliance extend the range to food and laboratory applications.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1000 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e190–230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e0–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e60–120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat deflection resistance\u003c\/th\u003e\n\u003ctd\u003e80–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFood contact\u003c\/th\u003e\n\u003ctd\u003eFDA compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecyclability\u003c\/th\u003e\n\u003ctd\u003e100 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (0 to 90 °C range)\u003c\/li\u003e\n  \u003cli\u003eOpen configurations for small parts; enclosed chamber recommended for parts larger than 10 × 10 × 10 cm\u003c\/li\u003e\n  \u003cli\u003eStandard brass, steel or hardened steel nozzle suitable for PETG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"1.1 kg \/ Noir \/ 1.75 mm","offer_id":57300667335000,"sku":"9010241023028","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"1.1 kg \/ Blanc \/ 1.75 mm","offer_id":57300667367768,"sku":"9010241023011","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"1.1 kg \/ Gris \/ 1.75 mm","offer_id":57300667400536,"sku":"9010241023042","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"1.1 kg \/ Clear \/ 1.75 mm","offer_id":57300667433304,"sku":"9010241023004","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"2.5 kg \/ Noir \/ 1.75 mm","offer_id":58565714739544,"sku":"9010241024025","price":58.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extrudr-PETG-1_75mm-1100g-Extrudr-1617384932_8f853972-a560-4c2a-9086-a0e9dd723fea.jpg?v=1778856672"},{"product_id":"extrudr-nx2-pla","title":"extrudr NX2 PLA – Matt Finish","description":"\u003cp style=\"text-align: justify;\"\u003ePLA NX2 MATT from Extrudr is a biopolymer filament developed to combine the ease of processing of standard PLA with enhanced mechanical properties. The MATT formulation delivers a matt surface finish that reduces layer-line visibility and limits post-processing operations on parts intended for end use. The filament is available in several colours to cover prototyping, short runs and presentation parts.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA NX2 MATT prints in the 200–230 °C range, with a build plate set between 20 and 60 °C. The wide speed range, from 20 to 200 mm\/s, makes it compatible with both high-speed production machines and detail-oriented printers.\u003cbr\u003e\u003cbr\u003eCooling shrinkage remains limited and build plate adhesion does not require an enclosed chamber for the majority of geometries, simplifying integration across heterogeneous machine fleets.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and compliance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe material combines tensile strength, toughness and impact resistance, extending the application range of standard PLA to functional parts subject to moderate loads. FDA, RoHS and toy safety standard compliance opens use to regulated sectors such as food, non-sterile medical environments and children's products. The biopolymer matrix, CO₂-neutral and biodegradable, integrates well into eco-design approaches.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA NX2 MATT (biopolymer)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm or 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg, 2.5 kg, 5 kg or 10 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e200–230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e20–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e20–200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCarbon footprint\u003c\/th\u003e\n\u003ctd\u003eCO₂-neutral\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiodegradability\u003c\/th\u003e\n\u003ctd\u003eBiodegradable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eFDA, RoHS, toy safety standards\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 2.85 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines with or without a heated build plate (20–60 °C range)\u003c\/li\u003e\n  \u003cli\u003eOpen-frame and enclosed configurations\u003c\/li\u003e\n  \u003cli\u003eStandard brass or steel nozzle, no abrasivity constraint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"1 kg \/ Anthracite \/ 1.75 mm","offer_id":57300882686296,"sku":"9010241043064","price":21.66,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris \/ 1.75 mm","offer_id":57314029240664,"sku":"9010241043040","price":21.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extnx04.png?v=1778859752"},{"product_id":"extrudr-xpetg-cf","title":"extrudr XPETG CF","description":"\u003cp style=\"text-align: justify;\"\u003eXPETG CF from Extrudr is a composite filament combining a modified PETG matrix with carbon fibre reinforcement. This combination delivers high rigidity and mechanical strength superior to standard PETG, while retaining accessible print behaviour and low cooling shrinkage. The range is available in several colours.\u003cbr\u003e\u003cbr\u003eThe material offers broad chemical resistance and a UL 94 flame-retardant rating at 3.2 mm wall thickness. The raw material is certified to REACH and RoHS standards, making it a proven option for producing functional parts in regulated sectors.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrinting is carried out between 220 and 250 °C, on a heated build plate at 60–90 °C, at speeds of 20 to 200 mm\/s. The manufacturer recommends printing a heat tower to dial in the optimal settings for each machine.\u003cbr\u003e\u003cbr\u003eThe carbon fibre fill is abrasive and requires the use of a hardened nozzle. Despite the high fibre content, interlayer adhesion remains good and the material shows neither significant warping nor notable shrinkage, simplifying the production of large parts.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eXPETG CF combines high mechanical strength, good elongation at break and heat resistance of 85 °C. These characteristics cover a wide spectrum of applications, from electronic component manufacturing and workshop jigs to technical utensils and lightweight structural parts. The fibre reinforcement gives a matt surface finish that reduces layer-line visibility and limits post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eModified carbon-fibre-reinforced PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm or 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e0.8 kg, 2.5 kg or 5 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e220–250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e20–200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlame-retardant rating\u003c\/th\u003e\n\u003ctd\u003eUL 94 (3.2 mm wall thickness)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 2.85 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (60 to 90 °C range)\u003c\/li\u003e\n  \u003cli\u003eHardened nozzle (hardened steel, ruby, carbide) required to handle the abrasive nature of the carbon fill\u003c\/li\u003e\n  \u003cli\u003eDirect drive or Bowden extruder, open-frame or enclosed configuration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57314164179288,"sku":"9010241026975","price":41.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Extrudr-XPETG.webp?v=1779088195"},{"product_id":"extrudr-xpetg-rec","title":"extrudr XPETG REC","description":"\u003cp style=\"text-align: justify;\"\u003eXPETG REC from Extrudr is a technical PETG filament formulated from recycled raw materials. The recovered materials are reprocessed and internally modified to ensure a quality level comparable to that of virgin PETG. The process, with low raw material and energy consumption, reduces the carbon footprint compared with conventional production.\u003cbr\u003e\u003cbr\u003eThe filament retains the characteristic properties of modified PETG: high chemical resistance, 100 % recyclability and good processability. It is available in several colours to cover prototyping and short-run eco-design requirements.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eXPETG REC prints between 230 and 260 °C, on a heated build plate at 60–100 °C, at speeds of 20 to 200 mm\/s. The manufacturer rates the processing difficulty as medium: the material is aimed at operators with a basic knowledge of FDM. Interlayer adhesion is high at the correct temperature, and impact resistance is rated 7\/10, qualifying the filament for functional parts subject to moderate mechanical loading.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe material offers heat resistance of 85–95 °C, extending the application range beyond standard PETG to electronic components, workshop jigs and technical utensils. The broad chemical resistance covers laboratory environments. Elongation at break (5\/10) and maximum load (7\/10) position the material for functional rather than highly deformable parts. Visual quality is rated 8\/10.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eModified recycled PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1000 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e230–260 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60–100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e20–200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003e85–95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecyclability\u003c\/th\u003e\n\u003ctd\u003e100 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty level\u003c\/th\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e5\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eImpact resistance\u003c\/th\u003e\n\u003ctd\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLayer adhesion\u003c\/th\u003e\n\u003ctd\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum load\u003c\/th\u003e\n\u003ctd\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVisual quality\u003c\/th\u003e\n\u003ctd\u003e8\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRaw material origin\u003c\/th\u003e\n\u003ctd\u003eRecycled raw materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (60 to 100 °C range)\u003c\/li\u003e\n  \u003cli\u003eNozzle capable of reaching 260 °C\u003c\/li\u003e\n  \u003cli\u003eOpen-frame or enclosed configurations, enclosed recommended for large parts\u003c\/li\u003e\n  \u003cli\u003eStandard brass, steel or hardened steel nozzle suitable for PETG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"1 kg \/ Blanc \/ 1.75 mm","offer_id":57314234401112,"sku":"9010241380015","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Transparent \/ 1.75 mm","offer_id":57314234433880,"sku":"9010241380008","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/202010_RePETG_white.jpg?v=1779089226"},{"product_id":"extrudr-pctg","title":"extrudr PCTG","description":"\u003cp style=\"text-align: justify;\"\u003ePCTG from Extrudr is a modified copolyester filament designed for industrial applications. Its formulation combines high chemical and thermal resistance with marked flexibility and impact resistance, all combined with a glassy surface finish. The material also offers flame-retardant properties to UL94 V2 and HB ratings.\u003cbr\u003e\u003cbr\u003eThe raw materials are certified for cosmetics contact, and comply with FDA, REACH and RoHS, opening use to regulated sectors. The filament is available in several colours to cover both prototyping and the production of functional parts with a refined aesthetic.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCTG prints between 250 and 270 °C, on a heated build plate at 50–70 °C. The material is rated as easy to process, making it accessible to operators with basic FDM knowledge. With sufficient nozzle heat and limited part cooling, interlayer adhesion is high, ensuring good mechanical performance on the Z-axis of functional parts.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCTG combines good rigidity with some flexibility and high impact resistance, distinguishing it from standard PETG on parts subject to dynamic loading. Its heat resistance of 80–90 °C allows use in electronic components, technical utensils and interior fitout parts. Scratch resistance and the glassy finish suit presentation elements, transparent covers and optical guards in industrial environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePCTG (modified copolyester)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e800 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250–270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003e80–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eGlassy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eScratch resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlame-retardant properties\u003c\/th\u003e\n\u003ctd\u003eUL94 V2 and HB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eCosmetics, FDA, REACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystem compatibility\u003c\/th\u003e\n\u003ctd\u003eBambu Lab AMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (50 to 70 °C range)\u003c\/li\u003e\n  \u003cli\u003eNozzle capable of reaching 270 °C\u003c\/li\u003e\n  \u003cli\u003eCompatible with Bambu Lab AMS\u003c\/li\u003e\n  \u003cli\u003eOpen-frame or enclosed configurations, direct drive or Bowden extruder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ Hellfire","offer_id":57314380218712,"sku":"9010241526260","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Transparent","offer_id":57474351890776,"sku":"9010241526000","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Rouge","offer_id":57474351923544,"sku":"9010241526154","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Bleu","offer_id":57474351956312,"sku":"9010241526147","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Anthracite","offer_id":57474351989080,"sku":"9010241526062","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Blanc","offer_id":57474352021848,"sku":"9010241526017","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Argent","offer_id":57474352054616,"sku":"9010241526086","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Noir","offer_id":57474352087384,"sku":"9010241526024","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Métalliques","offer_id":57474352120152,"sku":"9010241526055","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9010241526000_PCTG__transparent_1.avif?v=1780929970"},{"product_id":"basf-ultrafuse-pet","title":"Forward AM Ultrafuse PET","description":"\u003ch2\u003eProperties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eMade from an approved food-grade PET, a material widely used for food and beverage containers and bottles, Ultrafuse PET offers good impact resistance, good thermal stability and good interlayer adhesion.\u003cbr\u003e\u003cbr\u003eIt is an alternative to ABS, with the advantage of printing at temperatures close to those of PLA and being only slightly prone to lifting (warping) during printing.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe manufacturer recommends a heated bed temperature of around 75 °C, a print speed between 30 and 70 mm\/s and a printing temperature between 200 and 220 °C.\u003cbr\u003e\u003cbr\u003eSupplied on a standard spool, this filament prints on most non-proprietary FFF 3D printers.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePET (polyethylene terephthalate), food grade\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eForward AM (Ultrafuse)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrinting temperature\u003c\/th\u003e\n\u003ctd\u003e200 to 220 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003eAround 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e30 to 70 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eNon-proprietary FDM\/FFF 3D printers, standard spool\u003c\/li\u003e\n  \u003cli\u003eStandard nozzle (unfilled, non-abrasive material)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forward AM","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57314493202776,"sku":"BA1026","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Transparent","offer_id":57384945746264,"sku":"BA1037","price":24.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Ultrafuse_PETCF15Black_1.75mm_750g_600x_crop_center_d6f90fef-889b-49b9-b03c-6c1d622aeae5.webp?v=1779092523"},{"product_id":"basf-ultrafuse-pla","title":"Forward AM Ultrafuse PLA","description":"\u003ch2\u003eProperties\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUltrafuse PLA offers regular extrusion and dimensional stability that is maintained even on large-volume parts. It shows little warping and good interlayer adhesion, including on long prints.\u003cbr\u003e\u003cbr\u003eIts thermal consistency promotes a uniform result from the first layer, which makes it easy to use for beginners and professionals alike.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis PLA is suited to visual and functional prototyping, models, educational objects, decorative parts and small reproducible series requiring precision and repeatability.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eForward AM (Ultrafuse)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 mm FDM\/FFF 3D printers\u003c\/li\u003e\n  \u003cli\u003eStandard nozzle (unfilled, non-abrasive material)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forward AM","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57314528690520,"sku":"PLA-0002a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Bleu","offer_id":57372729999704,"sku":"PLA-0005a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Vert","offer_id":57372730065240,"sku":"PLA-0007a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Gris","offer_id":57372730098008,"sku":"PLA-0023a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Orange","offer_id":57372730130776,"sku":"PLA-0009a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Rouge","offer_id":57372730163544,"sku":"PLA-0004a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Blanc","offer_id":57372730196312,"sku":"PLA-0003a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Jaune","offer_id":57314535473496,"sku":"PLA-0006a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Nature","offer_id":57384916844888,"sku":"PLA-0001a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Noir","offer_id":57314528723288,"sku":"PLA-0002b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Bleu","offer_id":57372730032472,"sku":"PLA-0005b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Blanc","offer_id":57372730229080,"sku":"PLA-0003b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Jaune","offer_id":57314535506264,"sku":"PLA-0006b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"5.5 lb \/ 1.75 mm \/ Noir","offer_id":57384916877656,"sku":"PLA-0002a250","price":29.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-pla-0002a075-matriel-dimpression-3d-acide-polylactique-pla-noir-750-g.jpg?v=1779092949"},{"product_id":"pla-ultra-volumnic","title":"PLA Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eVolumic PLA Ultra is an industrial-grade PLA filament formulated for professional applications requiring both ease of processing and extended mechanical performance. Its formulation combines flexibility comparable to ABS with excellent interlayer adhesion and a refined surface finish, broadening its application range to functional parts subject to moderate stress.\u003cbr\u003e\u003cbr\u003eThe material has a distinctive technical property: its annealing capability allows a glass transition temperature of 144 °C to be reached after post-print heat treatment, where standard PLA is limited to around 55–60 °C. The filament is available in several colours and spool weights to cover prototyping, short runs and presentation parts.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA Ultra prints at 210 °C at the nozzle, on a heated build plate at 50 °C. The manufacturer rates processing as very easy and build plate adhesion as strong, which simplifies session start-up and limits large-part lifting. The filament accepts all standard nozzle types without abrasivity constraints and does not require an enclosed chamber for the majority of geometries.\u003c\/p\u003e\n\u003ch2\u003ePost-processing and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eOven annealing transforms the material's crystalline structure, raising the Tg from the standard PLA value to 144 °C, enabling use in hot environments where standard PLA would creep. This characteristic opens use to functional parts exposed under engine covers, in hot technical rooms or in contact with moderate heat sources. Pre-annealing flexibility retains a progressive failure behaviour, distinct from brittle standard PLA, qualifying the material for mechanical prototypes, workshop jigs and end-use parts.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA (polylactic acid), industrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eMultiple spool weights available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTg after annealing\u003c\/th\u003e\n\u003ctd\u003e144 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll types\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint difficulty\u003c\/th\u003e\n\u003ctd\u003eVery easy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream Series printers\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (50 °C setting)\u003c\/li\u003e\n  \u003cli\u003eLacquered build plate recommended\u003c\/li\u003e\n  \u003cli\u003eAll nozzle types (brass, steel, hardened steel) without abrasivity constraint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Jaune","offer_id":57314667692376,"sku":"PLAV656","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge","offer_id":57314667725144,"sku":"PLAV655","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu","offer_id":57314667757912,"sku":"PLAV654","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange","offer_id":57314667790680,"sku":"PLAV653","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris aluminium","offer_id":57314667823448,"sku":"PLAV652","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Nature","offer_id":57314667856216,"sku":"PLAV651","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Vert anis","offer_id":57314667888984,"sku":"PLAV1013","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Noir","offer_id":57314751316312,"sku":"PLAV560","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Noir","offer_id":57314751578456,"sku":"PLAV1102","price":69.2,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Blanc","offer_id":57314765701464,"sku":"PLAV1037","price":69.2,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Gris","offer_id":57314882290008,"sku":"PLAV1794","price":69.5,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Bleu","offer_id":57314751676760,"sku":"PLAV1229","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Noir","offer_id":57314751840600,"sku":"PLAV1103","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Blanc","offer_id":57314765734232,"sku":"PLAV4894","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Gris","offer_id":57314882322776,"sku":"PLAV5368","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Blanc","offer_id":57316392698200,"sku":"PLAV650","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/pla-ultra-1kg-jaune-3.jpg?v=1779094557"},{"product_id":"petg-ultra-translucide-volumnic","title":"PETG Ultra Translucent – Volumic","description":"\u003ch2\u003eProperties\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG Ultra translucent is an industrial-grade material offering good mechanical strength combined with a quality finish. It stands out for very good bed adhesion from low temperatures upwards and very limited stringing (angel hair) during printing.\u003cbr\u003e\u003cbr\u003eIts refined finish and ease of use make it a material suited to regular professional use.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG Ultra prints at a recommended nozzle temperature of 230 °C, on a bed at 60 °C, with any type of nozzle. Its printing difficulty is rated as easy, with an excellent finish.\u003cbr\u003e\u003cbr\u003eBed adhesion is normal; a lacquered bed is recommended.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG (polyethylene terephthalate glycol)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eNormal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eTranslucent natural, blue, red and orange\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended bed configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered bed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF 3D printers fitted with a heated bed\u003c\/li\u003e\n  \u003cli\u003eStandard nozzle (unfilled, non-abrasive material)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Naturel (translucide)","offer_id":57317167792472,"sku":"PETV569","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu translucide","offer_id":57317167694168,"sku":"PETV649","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge translucide","offer_id":57317167726936,"sku":"PETV648","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange translucide","offer_id":57317167759704,"sku":"PETV647","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Naturel (translucide)","offer_id":57317253284184,"sku":"PETV5907","price":69.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/petg-ultra-1kg-bleu-translucide-3.jpg?v=1779110450"},{"product_id":"petg-ultra-volumic","title":"PETG Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003ePETG Ultra is an industrial-grade filament developed by Volumic, formulated from PETG with a PCTG addition to combine mechanical performance and surface finish quality. Available in several colours, it is aimed at prototyping workshops and design offices looking for a versatile, easy-to-process consumable.\u003cbr\u003e\u003cbr\u003eThe formulation is optimised to limit stringing during extrusion, which reduces post-processing operations on parts featuring rapid travel moves or complex geometries.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 230 °C at the nozzle, on a heated build plate at 60 °C. This contained extrusion temperature for a PETG limits thermal stress on the machine's hot-end components and allows processing without an enclosed chamber.\u003cbr\u003e\u003cbr\u003eAdhesion on a lacquered build plate is rated as normal, without the need for additional adhesive. The material is compatible with all nozzle types (brass, steel, hardened), its additive content generating no notable abrasion.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG Ultra is suited to functional prototyping, assembly parts and technical supports. Its surface finish also enables the production of visible parts requiring no aesthetic post-processing. The stated ease of printing makes it suitable for recurring production without advanced parameter tuning.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG \/ PCTG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll types (brass, steel, hardened)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eNormal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint difficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e2.3 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePETV6087\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Volumic Stream range\u003c\/li\u003e\n  \u003cli\u003eCompatible with all standard and high-temperature nozzles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Noir \/ 1.75 mm","offer_id":57317479514456,"sku":"PETV645","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Blanc \/ 1.75 mm","offer_id":57317567398232,"sku":"PETV1134","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu \/ 1.75 mm","offer_id":57317567431000,"sku":"PETV1133","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange \/ 1.75 mm","offer_id":57317567463768,"sku":"PETV1136","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge \/ 1.75 mm","offer_id":57317567496536,"sku":"PETV1132","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Noir \/ 1.75 mm","offer_id":57317567529304,"sku":"PETV4439","price":75.0,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Blanc \/ 1.75 mm","offer_id":57317567562072,"sku":"PETV5898","price":75.0,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Orange \/ 1.75 mm","offer_id":57317567594840,"sku":"PETV6087","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/petg-ultra-1kg-noir-opaque-3.jpg?v=1779115511"},{"product_id":"prusament-pla-refill-nfc-compatible","title":"Prusament PLA Refill (NFC Compatible)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PLA Refill 900g is a premium filament manufactured in-house by Prusa Research, packaged in a refill format without flanges or core. The format is designed to be installed on a previously emptied Prusament spool and is part of the manufacturer's eco-design approach by reducing the amount of packaging material per kilogram of filament delivered.\u003cbr\u003e\u003cbr\u003eThe entire manufacturing process is controlled in-house, with a controlled dimensional tolerance of ±0.02 mm for solid colours (±0.03 mm for blends), guaranteeing consistent extrusion in production. Each refill is NFC-compatible for automatic recognition by equipped printers, and the NFC refill version is not backwards-compatible with the 1 kg cardboard-core refills of the previous generation.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA prints at 215 °C at the nozzle, on a heated build plate at 50–60 °C. Its low thermal expansion allows large parts to be printed without significant warping, and its low melting temperature also makes it suited to small detailed parts. The material does not require an enclosed chamber and accepts smooth PEI, textured or satin steel sheets.\u003c\/p\u003e\n\u003ch2\u003eApplications and limitations\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA remains the easiest material to print, suited to rapid prototyping, concept models, detailed figurines and presentation parts. It has low heat resistance and brittle failure behaviour, which limits its use in functional parts exposed to high temperatures or subject to significant mechanical stress. For these applications, opt for a PETG, ABS or technical material. Each spool is traceable via a QR code giving access to production parameters online at prusament.com. The range is available in several colours.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm (±0.03 mm for blends)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g refill, without flanges or core, NFC-compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSheet compatibility\u003c\/th\u003e\n\u003ctd\u003eSmooth PEI, textured or satin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code per spool, parameters available at prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Original Prusa range (MK3S, MK4, MK4S, XL, CORE One)\u003c\/li\u003e\n  \u003cli\u003ePrinters equipped with an NFC reader for automatic filament recognition\u003c\/li\u003e\n  \u003cli\u003eInstallation on a previously emptied Prusament NFC spool\u003c\/li\u003e\n  \u003cli\u003eNot backwards-compatible with 1 kg cardboard-core refills of the previous generation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.9 kg \/ Azure Blue \/ 1.75 mm","offer_id":57321415639384,"sku":"IDS:3554","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57321415672152,"sku":"IDS:3549","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Silver \/ 1.75 mm","offer_id":57321415704920,"sku":"IDS:3550","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Jet Black \/ 1.75 mm","offer_id":57321415737688,"sku":"IDS:3551","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Vanilla White \/ 1.75 mm","offer_id":57321415770456,"sku":"IDS:3552","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Pristine White \/ 1.75 mm","offer_id":57321415803224,"sku":"IDS:3553","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_pla_azure_blue_refill_900.jpg?v=1779174487"},{"product_id":"treed-pla-fusion","title":"TreeD PLA Fusion","description":"\u003cp style=\"text-align: justify;\"\u003ePLA Fusion from TreeD Filaments is a PLA filament formulated specifically for long-duration prints. Its composition is optimised to limit nozzle clogging during extended extrusion, making it a reference suited to continuous production workshops and printers equipped with all-metal heater blocks.\u003cbr\u003e\u003cbr\u003eOdourless during printing, the filament maintains consistent diameter and colour throughout the spool, including at high throughput. It is available in several colours.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA Fusion prints in the 190–210 °C range with a heated build plate that can be set up to 70 °C, without plate heating being strictly necessary. Its formulation controls shrinkage phenomena and tolerates profiles with numerous retractions, making it suited to parts with complex geometries and long continuous print runs.\u003cbr\u003e\u003cbr\u003eThe material remains stable on all-metal extruders, which are known to be prone to clogging with standard PLA.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA Fusion is aimed at prototyping workshops, design offices and production operations manufacturing medium to large parts, continuous series or multi-part prints. It is suited to functional prototyping not subject to high thermal stress, study models, presentation parts and light tooling, provided the service temperature remains below the material's Vicat point.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA — Fusion formulation (long-duration prints)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e190–210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003eUp to 70 °C (not mandatory)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.24 g\/cm³ (ASTM D792)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMelting point\u003c\/th\u003e\n\u003ctd\u003e144 °C (ASTM D3418)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVicat point\u003c\/th\u003e\n\u003ctd\u003e55–60 °C (ASTM D3418)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus\u003c\/th\u003e\n\u003ctd\u003e65.5 MPa (ASTM D882)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOdour during printing\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n  \u003cli\u003eCompatible with all-metal hotend extruders\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard PLA print profiles\u003c\/li\u003e\n  \u003cli\u003eSuited to both open-frame and enclosed printers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TreeD","offers":[{"title":"0.75 kg \/ Aluminium \/ 1.75 mm","offer_id":57321790046552,"sku":"PLAFUSI-ALLU-750-175","price":29.7,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Blanc \/ 1.75 mm","offer_id":57321790079320,"sku":"PLAFUSI-9003-750-175","price":29.7,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Bleu \/ 1.75 mm","offer_id":57321790112088,"sku":"PLAFUSI-5002-750-175","price":29.7,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Rouge \/ 1.75 mm","offer_id":57321978560856,"sku":"PLAFUSI-3000-750-175","price":29.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_pla-fusion-aluminium-treed_764cc97b-2487-48e9-aa92-65ec9c4d3ca2.png?v=1779177723"},{"product_id":"prusament-pc-nfc","title":"Prusament PC Blend (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend is a premium polycarbonate filament manufactured in-house by Prusa Research, available in several colours. Its formulation is positioned as an engineering material for functional parts subject to high thermal and mechanical stresses, with a service temperature up to 113 °C and good cold-creep resistance.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.03 mm. A QR code gives access to detailed spool parameters (diameter, ovality, colour, mechanical properties) on prusament.com, for complete traceability in workshop and series production.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePC Blend prints at 275 ±10 °C on a heated build plate at 110 ±10 °C, with a satin steel sheet recommended by the manufacturer. An enclosed chamber or tall brim around the part is advised to limit shrinkage and warping, which are particularly pronounced on large parts despite improved dimensional stability compared with most polycarbonates on the market. The material has low moisture absorption, good electrical insulation properties, and contains no styrene (a non-toxic alternative to ASA). It is intended for advanced users; PLA or PETG is preferable for learning FDM printing.\u003c\/p\u003e\n\u003ch2\u003ePackaging and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eRecent spools are fitted with a fully rewritable OpenPrintTag NFC tag operating offline: the printer automatically recognises the spool and accesses essential material data without dependency on a cloud service or proprietary ecosystem. The redesigned spool incorporates a locking mechanism facilitating removal for use as a refill, and remains stable during filament drying at recommended temperatures. A filament length of approximately 330 m is obtained from a 900 g spool.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePC Blend (polycarbonate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.03 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature (nozzle)\u003c\/th\u003e\n\u003ctd\u003e275 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e110 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eSatin steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart service temperature\u003c\/th\u003e\n\u003ctd\u003eUp to 113 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMoisture absorption\u003c\/th\u003e\n\u003ctd\u003eVery low\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElectrical properties\u003c\/th\u003e\n\u003ctd\u003eGood insulation properties\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eStyrene-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUser level\u003c\/th\u003e\n\u003ctd\u003eAdvanced\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g spool (approx. 330 m of filament)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code with access to spool parameters on prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers accepting nozzle temperatures around 275 °C and bed temperatures around 110 °C\u003c\/li\u003e\n  \u003cli\u003eEnclosed chamber recommended for large parts\u003c\/li\u003e\n  \u003cli\u003ePrusa MK4, MK4S, MK3.9, MK3.9S, XL and CORE One printers\u003c\/li\u003e\n  \u003cli\u003eAutomatic spool recognition on any OpenPrintTag-compatible system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"2 lbs \/ Jet Black \/ 1.75 mm","offer_id":57332195361112,"sku":"IDS:3495","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Urban Grey \/ 1.75 mm","offer_id":57332195393880,"sku":"IDS:3496","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Nature \/ 1.75 mm","offer_id":57332195426648,"sku":"IDS:3497","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Orange \/ 1.75 mm","offer_id":57332195459416,"sku":"IDS:3498","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Pro Green \/ 1.75 mm","offer_id":57332195492184,"sku":"IDS:3499","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57332195524952,"sku":"IDS:3950","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_PC_JET_BLACK_900G.jpg?v=1779262254"},{"product_id":"prusament-pc-blend-carbon-fiber-black-nfc","title":"Prusament PC Blend Carbon Fibre Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend Carbon Fiber is a technical filament manufactured in-house by Prusa Research, based on polycarbonate reinforced with recycled carbon fibres from the production process. This formulation delivers increased rigidity, good dimensional stability and a high service temperature compared with unfilled PC Blend, while remaining easier to print.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.04 mm. Production parameters for each batch (measured diameter, ovality, colour) are accessible online via the QR code on the spool. The filament is available in several colours.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF prints at 285 °C with a heated build plate at 110 °C, without the need for an enclosed chamber thanks to limited shrinkage that allows large models to be printed. A satin or powder-coated TXT steel sheet gives good adhesion; on smooth PEI, apply a thin layer of glue stick to protect the surface.\u003cbr\u003e\u003cbr\u003eUse of a hardened steel nozzle is mandatory: carbon fibres are abrasive and quickly wear out a brass nozzle. The filament does not require pre-drying before printing.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF is intended for technical parts requiring mechanical strength, rigidity and a service temperature up to 114 °C, raised to 130 °C after annealing. It also offers good UV stability and resistance to common chemicals, with a matt surface finish. It is suited to functional components, supports, fixings, workshop tooling and jigs subject to moderate thermal stresses. Note that it remains slightly more brittle than unfilled PC Blend.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-filled PC Blend (PCCF)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e285 °C (range 275–295 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e110 °C (range 100–120 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate\u003c\/th\u003e\n\u003ctd\u003eSatin or powder-coated TXT steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRequired nozzle\u003c\/th\u003e\n\u003ctd\u003eHardened steel mandatory\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 114 °C (130 °C after annealing)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUV stability\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eCommon chemicals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePre-drying before printing\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEnclosed chamber\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e2 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eOpenPrintTag NFC tag (rewritable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened steel nozzle\u003c\/li\u003e\n  \u003cli\u003eOptimised for Prusa MK3S+, MK4, MK4S, XL and CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-material and multicolour systems via OpenPrintTag NFC tag\u003c\/li\u003e\n  \u003cli\u003eDedicated 2 kg spool holder required (not compatible with the standard spool holder)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57332761264472,"sku":"IDS:3489","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm","offer_id":57332761297240,"sku":"IDS:3946","price":112.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusament_pc_fiber_black_800.jpg?v=1779269592"},{"product_id":"universal-ultra-plc-cf-volumic","title":"UNIVERSAL Ultra PLC-CF – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eUNIVERSAL ULTRA Carbon is the carbon fibre-filled variant of Volumic's PLC (Polylactic acid Compound) composite. Retaining the base of the UNIVERSAL ULTRA range (high rigidity, thermal resistance up to 160 °C peak and 115 °C continuous, processing close to standard PLA), it adds a long carbon fibre reinforcement that significantly increases mechanical strength and thermal resistance, and brings the characteristic matt surface finish of filled materials.\u003cbr\u003e\u003cbr\u003eThis formulation is dedicated to functional parts under high mechanical stress: workshop jigs, supports, lightweight structural parts, prototypes close to the behaviour of production parts. Several packaging formats and colours are offered in the UNIVERSAL ULTRA range.\u003c\/p\u003e\n\n\u003ch2\u003eProcessing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at a recommended nozzle temperature of 225 °C on a heated build plate at 60 °C. The presence of long fibres mandates a steel nozzle (brass and copper\/nickel wear rapidly) and a minimum diameter of 0.5 mm: a standard 0.4 mm nozzle will cause constant blockages. Build plate adhesion is ultra-strong, best exploited on a very lightly sprayed plate to preserve ease of removal at the end of printing.\u003cbr\u003e\u003cbr\u003eBeyond this tooling constraint, the processing difficulty is rated \"very easy\" by the manufacturer, making it a composite consumable accessible to operators not specialised in filled materials.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with a desiccant after opening, to preserve extrusion properties. Technical data sheet and safety data sheet (MSDS) available from the distributor for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLC – Polylactic acid Compound with carbon fibre fill\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eLong carbon fibres\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eCharacteristic appearance of carbon-filled materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 160 °C peak \/ 115 °C continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eSteel mandatory\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMinimum nozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (0.4 mm prohibited: guaranteed blockages)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eUltra-strong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eVery lightly sprayed plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eVery easy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish quality\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial characteristics\u003c\/th\u003e\n\u003ctd\u003eHigh mechanical strength, increased rigidity, enhanced thermal resistance, biodegradable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM printers with 1.75 mm filament equipped with a steel nozzle ≥ 0.5 mm\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream, SH and EXO printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers capable of printing fibre-filled composites (Prusa MK4\/MK3.9\/XL\/CORE One, Bambu Lab X1, Creality K1, etc.) subject to appropriate equipment\u003c\/li\u003e\n  \u003cli\u003eApplications: workshop jigs, technical supports, lightweight structural parts, functional prototypes under high mechanical stress, near-production-behaviour validation parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ 1.75 mm","offer_id":57371706982744,"sku":"UNIV1131","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ 1.75 mm","offer_id":57371707015512,"sku":"UNIV5627","price":115.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/universal-ultra-1kg-carbone-3_dd6ccb9a-6e8f-4bd5-8776-436d5ae56543.jpg?v=1779783289"},{"product_id":"bumper-ultra-volumic","title":"Bumper Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eBumper ULTRA is a high-performance semi-flexible filament developed by Volumic, with Shore 60D hardness, specifically positioned for the manufacture of impact-resistant objects. Its hardness places it between standard soft TPUs and rigid thermoplastics: it provides elastic deformation under impact, good tear resistance and rapid shape recovery after stress — properties sought for parts subject to repeated impacts or high dynamic loads.\u003cbr\u003e\u003cbr\u003eTypical applications: bumpers, buffers, dampers, edge protectors, anti-vibration supports, protective casings, handling jigs. Several colours are offered in the range.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eBumper ULTRA prints at a recommended nozzle temperature of 230 °C on a heated build plate at 50 °C, with a brass or copper nozzle. Its strong build plate adhesion requires a sprayed plate (3DLac-type spray) to ensure clean removal at the end of printing without surface degradation. Processing difficulty is rated \"easy\" by the manufacturer, making it a consumable accessible even to operators not specialised in semi-flexible materials.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with a desiccant after opening, to preserve extrusion properties (semi-flexible materials are sensitive to ambient humidity). Technical data sheet and safety data sheet (MSDS) available from the distributor for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHigh-performance semi-flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 60D\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate temperature\u003c\/th\u003e\n\u003ctd\u003e50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eBrass or copper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eSprayed plate (3DLac)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish quality\u003c\/th\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers capable of printing semi-flexible materials\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream, SH and EXO printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers equipped with a Direct Drive extruder\u003c\/li\u003e\n  \u003cli\u003eApplications: bumpers, buffers, dampers, edge protectors, anti-vibration supports, protective casings, handling jigs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"0.75 kg \/ Black","offer_id":57371832516952,"sku":"FLXV5893","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Natural","offer_id":57371832549720,"sku":"FLXV969","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/bumper-ultra-750g-noir-3.jpg?v=1779786961"},{"product_id":"abs-ultra-volumic","title":"ABS ULTRA – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eABS ULTRA is a professional Acrylonitrile Butadiene Styrene (ABS) filament developed by Volumic, whose formulation is optimised to significantly reduce the warping defects (differential shrinkage and corner lifting) typically associated with standard ABS. This characteristic enables printing at lower temperatures than conventional ABS while maintaining good inter-layer bonding and a controlled surface finish.\u003cbr\u003e\u003cbr\u003eABS remains a reference technical thermoplastic for functional parts subject to moderate to high mechanical stresses and service temperatures higher than those supported by PLA. Several colours and packaging formats are offered in the range.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eABS ULTRA prints at a recommended nozzle temperature of 235 °C on a heated build plate at 75 °C, and is compatible with all nozzle materials (brass, copper\/nickel, steel). Build plate adhesion is rated as normal, best used on a sprayed plate (3DLac-type spray), with a brim recommended on parts with low contact surface or high build height. Processing difficulty is rated \"easy\" by the manufacturer. A closed or semi-closed enclosure is advisable to stabilise the ambient temperature on large parts and limit any residual shrinkage.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with a desiccant after opening, to preserve extrusion properties. Note that ABS emits fumes during printing: use in a well-ventilated room, or on a machine equipped with a HEPA\/activated carbon filtration system. Technical data sheet and safety data sheet (MSDS) available from the distributor for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS (Acrylonitrile Butadiene Styrene)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate temperature\u003c\/th\u003e\n\u003ctd\u003e75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll (brass, copper\/nickel, steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eNormal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eSprayed plate (3DLac), brim recommended on large parts\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish quality\u003c\/th\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial characteristics\u003c\/th\u003e\n\u003ctd\u003eVery low warping, good inter-layer bonding, low printing temperatures for ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 mm FDM printers capable of printing ABS (heated build plate ≥ 75 °C)\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream, SH and EXO printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers with closed or semi-closed enclosure (Prusa MK4 \/ CORE One, Bambu Lab X1, Stratasys F-series, Raise3D Pro, etc.)\u003c\/li\u003e\n  \u003cli\u003eApplications: functional parts, technical housings, mechanical supports, validation prototypes, industrial replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Blanc","offer_id":57371876524376,"sku":"ABSV659","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu","offer_id":57371876557144,"sku":"ABSV662","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris","offer_id":57371876589912,"sku":"ABSV661","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris clair","offer_id":57371876622680,"sku":"ABSV660","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Nature","offer_id":57371876655448,"sku":"ABSV664","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Noir","offer_id":57371876688216,"sku":"ABSV658","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge","offer_id":57371876720984,"sku":"ABSV663","price":38.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/abs-ultra-1kg-blanc-3.jpg?v=1779787606"},{"product_id":"basf-ultrafuse-pet-cf15","title":"Forward AM Ultrafuse PET CF15","description":"\u003cp style=\"text-align: justify;\"\u003eUltrafuse PET CF15 is a technical filament developed by Forward AM. It combines a polyethylene terephthalate (PET) matrix with 15% carbon fibre reinforcement, making it an industrial consumable designed for functional parts under high mechanical and thermal stress.\u003cbr\u003e\u003cbr\u003eCompared to other carbon fibre filled composites, its formulation is optimised for ease of processing and dimensional stability: low moisture absorption, low abrasiveness, direct printing possible on glass or PEI sheet, high surface quality. PET CF15 is compatible with HIPS as a breakaway support and BVOH as a water-soluble support, making it usable on dual-extruder machines for complex geometries.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at a nozzle temperature of 250-270 °C on a heated bed between 65 and 85 °C, with a recommended speed range of 30 to 80 mm\/s. The presence of fibres requires a ruby or hardened steel nozzle, with a minimum diameter of 0.6 mm to ensure regular flow without clogging. Before printing, drying the filament at 65 °C in a hot-air dryer or vacuum oven for 4 to 16 hours is recommended to restore the extrusion properties of an opened spool.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documents\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePET CF15 has very low native moisture absorption, making it a particularly suitable material for humid operating environments. Nevertheless, store the spool in a dry environment, in a resealable bag with desiccant after opening. Forward AM technical data sheet (Ultrafuse PET CF15 TDS) and safety data sheet (MSDS) available from the distributor, for integration into HSE procedures and the workshop risk assessment document.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon fibre filled PET (15 %)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging options offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eCharacteristic appearance of carbon-filled materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e250-270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e65-85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed material\u003c\/th\u003e\n\u003ctd\u003eGlass or PEI sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMinimum nozzle diameter\u003c\/th\u003e\n\u003ctd\u003e≥ 0.6 mm (ruby or hardened steel mandatory)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e30-80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 108 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e12.5 MPa (ZX) \/ 63.2 MPa (XY), ISO 527\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2253 MPa (ZX) \/ 5452 MPa (XY), ISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e0.5 % (ZX) \/ 3.7 % (XY), ISO 527\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIzod impact resistance (notched)\u003c\/th\u003e\n\u003ctd\u003e2.0 kJ\/m² (ZX) \/ 5.7 kJ\/m² (XY), ISO 180\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMoisture absorption\u003c\/th\u003e\n\u003ctd\u003eVery low\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible supports\u003c\/th\u003e\n\u003ctd\u003eHIPS (breakaway), BVOH (soluble)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended drying\u003c\/th\u003e\n\u003ctd\u003e65 °C, 4 to 16 h (hot-air dryer or vacuum oven)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet TDS, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eForward AM (Ultrafuse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 mm FDM printers equipped with a ruby or hardened steel nozzle ≥ 0.6 mm and capable of reaching 270 °C\u003c\/li\u003e\n  \u003cli\u003eProfessional printers with a closed enclosure recommended\u003c\/li\u003e\n  \u003cli\u003eCompatible with Intamsys Funmat, Raise3D Pro, Bambu Lab X1 Carbon \/ X1E \/ H2D, Prusa MK4S \/ XL \/ CORE One, Volumic Stream Performance, Zortrax, etc.\u003c\/li\u003e\n  \u003cli\u003eCompatible with dual-extruder printers using HIPS or BVOH as support\u003c\/li\u003e\n  \u003cli\u003eApplications: automotive components, workshop jigs and fixtures, lightweight structural parts, applications in humid working environments, industrial parts with high mechanical and thermal resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forward AM","offers":[{"title":"Black \/ 0.75 kg \/ 1.75 mm","offer_id":57372879749464,"sku":"PCF-0350a075","price":67.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ULTRAFUSECF15.png?v=1779800064"},{"product_id":"basf-ultrafuse-pla-pro1","title":"Forward AM Ultrafuse PLA PRO1","description":"\u003cp style=\"text-align: justify;\"\u003eUltrafuse PLA PRO1 is a bio-based engineering filament developed by Forward AM, positioned as a technical PLA for professionals who require speed, mechanical strength and surface quality at the same time. Its formulation prints as easily as a standard PLA but allows print speeds previously reserved for so-called \"high-speed\" profiles, while offering mechanical properties superior to those of printed ABS.\u003cbr\u003e\u003cbr\u003eBy adjusting the print parameters, the user can orient the profile towards pure speed, surface finish, mechanical strength, or a compromise between these three axes. Production quality control guarantees controlled consistency between colours and between batches, a point sought in multi-machine series production. Several colours and several diameters are offered in the range.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at a nozzle temperature of 200-220 °C on a heated bed between 50 and 70 °C, with an extremely wide speed range from 40 to 300 mm\/s. To exploit the highest speeds, it may be necessary to raise the nozzle temperature to around 220-230 °C; at very high speed, the surface finish may be slightly degraded.\u003cbr\u003e\u003cbr\u003eIts very good interlayer adhesion increases the final strength of the parts and their functionality. The filament can be deposited directly on glass or low-temperature tape, without the need for a closed enclosure. The material is biocompatible (Forward AM documentation available) and offers biocompatibility that is useful in certain regulated applications.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and documents\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe target applications documented by the manufacturer cover workshop jigs and fixtures as well as functional prototyping. Technical data sheet (TDS), safety data sheet (MSDS) and dedicated print profiles (Ultimaker, Prusa, BigRep, Bambu Lab, Raise3D, BCN3D) available from Forward AM and the distributor, for integration into HSE procedures and the workshop risk assessment document.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBio-based engineering PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameters available in the range\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters offered\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging options offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e200-220 °C (up to 230 °C for very high speeds)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50-70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed material\u003c\/th\u003e\n\u003ctd\u003eGlass, low-temperature tape\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e≥ 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e40 to 300 mm\/s (depending on printer and geometry)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint time reduction\u003c\/th\u003e\n\u003ctd\u003e30 to 80 % depending on printer and part\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e21.8 MPa (Z-X) \/ 48 MPa (X-Y)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2340 MPa (X-Z) \/ 2823 MPa (X-Y)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e0.9 % (Z-X) \/ 21.9 % (X-Y)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eBio-based, biocompatible, recycled packaging, generally recyclable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003eJigs \u0026amp; fixtures, functional prototyping\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet (TDS), safety data sheet (MSDS), dedicated print profiles\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eForward AM (Ultrafuse)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers compatible with the chosen filament diameter\u003c\/li\u003e\n  \u003cli\u003eStandard print profiles available for Ultimaker, Prusa, BigRep, BCN3D Stratos\u003c\/li\u003e\n  \u003cli\u003eHigh-speed profiles available for Bambu Lab and Raise3D\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers capable of reaching 220-230 °C and using high-speed profiles\u003c\/li\u003e\n  \u003cli\u003eApplications: workshop jigs and fixtures, functional prototyping, parts requiring a speed \/ strength \/ surface quality compromise, applications requiring biocompatibility (to be validated according to use)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Forward AM","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57373330276696,"sku":"PR1-7502a075","price":28.88,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Gris","offer_id":57373330309464,"sku":"PR1-7523a075","price":28.88,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Blanc","offer_id":57373330342232,"sku":"PR1-7501a075","price":28.88,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Noir","offer_id":57373330375000,"sku":"PR1-7502a250","price":73.52,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Gris","offer_id":57373330407768,"sku":"PR1-7523a250","price":73.52,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Blanc","offer_id":57373330440536,"sku":"PR1-7501a250","price":73.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Ultrafuse-PLA-PRO1-Black-175-2.png?v=1779804851"},{"product_id":"prusament-rpla-nfc","title":"Prusament rPLA (NFC)","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003erPLA prints at a nozzle temperature of 205 ± 10 °C on a heated build plate at 50 ± 10 °C, without a closed enclosure, on a smooth, textured or satin PEI sheet. It exhibits low warping and great ease of printing, comparable to standard PLA.\u003cbr\u003e\u003cbr\u003eIts mechanical properties are close to those of classic PLA, with a slightly more brittle and more hygroscopic material. The colouring comes from processed organic waste (e.g. red algae), so the tint is unique to each batch and the organic additives emit a perceptible but non-toxic odour during printing. rPLA is not recommended for parts exposed to high temperatures or high mechanical stresses.\u003c\/p\u003e\n\u003ch2\u003eTraceability and storage\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eEach spool integrates a rewritable NFC tag conforming to the OpenPrintTag standard (offline operation, multi-brand) and a QR code providing access to batch manufacturing parameters at prusament.com. As PLA is slightly hygroscopic, store the spool dry with a desiccant after opening; drying according to the Prusa procedure is recommended in the event of moisture absorption.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRecycled PLA (rPLA), organic natural pigments\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.03 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool, NFC OpenPrintTag tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable shades\u003c\/th\u003e\n\u003ctd\u003eSeveral natural shades offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e205 ± 10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate temperature\u003c\/th\u003e\n\u003ctd\u003e50 ± 10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended sheets\u003c\/th\u003e\n\u003ctd\u003eSmooth, textured or satin PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eEasy to print, low warping, unique tint per batch, recycled, bio-based\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLimitations\u003c\/th\u003e\n\u003ctd\u003eSlightly brittle, hygroscopic, low heat resistance, perceptible odour (non-toxic)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code + batch data at prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusa Research, Prusament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n  \u003cli\u003eOptimised for Original Prusa MK4\/MK4S, MK3.9, MK3S+, MINI, XL, CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with Bambu Lab, Creality, Voron, Anycubic and other FDM printers\u003c\/li\u003e\n  \u003cli\u003eNFC tag compatible with OpenPrintTag standard-compliant ecosystems\u003c\/li\u003e\n  \u003cli\u003eApplications: aesthetic models, visual prototypes, interior decoration, parts with a reduced environmental footprint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"2.2 lbs \/ 1.75 mm \/ Corn Pigment","offer_id":57384993096024,"sku":"IDS:3531","price":29.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/7d344aba-b88a-4276-915e-f332c4916efd.jpg?v=1779954997"},{"product_id":"kimya-pc-cf","title":"KIMYA PC-CF (Dahltram C-250CF)","description":"\u003ch2\u003eIndustrial applications and composite tooling\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eDahltram C-250CF is developed for applications requiring high mechanical strength, good thermal resistance and controlled geometric stability. This material is used for manufacturing functional prototypes, jigs, assembly fixtures, production aids as well as low-volume parts intended for operational use.\u003cbr\u003e\u003cbr\u003eIts carbon-fibre filled modified polycarbonate structure also allows the production of master models, moulds and composite tooling intended for low- and medium-temperature processes.\u003c\/p\u003e \u003ch2\u003eMaterial behaviour\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eThe carbon reinforcement improves the overall rigidity of the material while limiting the deformation phenomena linked to printing. Dahltram C-250CF offers good dimensional stability as well as thermal resistance suited to industrial environments. The material is compatible with vacuum applications and autoclave processes, and can be machined to obtain the required tolerances and surface finishes.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre reinforced modified polycarbonate\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFiller content\u003c\/th\u003e\n\u003ctd\u003e20 % carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile strength X-Y\u003c\/th\u003e\n\u003ctd\u003e112.4 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile strength Z\u003c\/th\u003e\n\u003ctd\u003e50.3 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile modulus X-Y\u003c\/th\u003e\n\u003ctd\u003e11 GPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile modulus Z\u003c\/th\u003e\n\u003ctd\u003e3 GPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural strength X-Y\u003c\/th\u003e\n\u003ctd\u003e180 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural strength Z\u003c\/th\u003e\n\u003ctd\u003e93.8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural modulus X-Y\u003c\/th\u003e\n\u003ctd\u003e10.8 GPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural modulus Z\u003c\/th\u003e\n\u003ctd\u003e3.8 GPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eHeat deflection temperature (HDT)\u003c\/th\u003e\n\u003ctd\u003e144 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaximum recommended service temperature\u003c\/th\u003e\n\u003ctd\u003e135 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinted density\u003c\/th\u003e\n\u003ctd\u003e1.21 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial density\u003c\/th\u003e\n\u003ctd\u003e1.44 kg\/L\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ additive manufacturing\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references, diameters and pack sizes\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eAvailable in several variants depending on the reference\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers compatible with carbon-fibre reinforced technical materials\u003c\/li\u003e \u003cli\u003eAdditive manufacturing systems for functional prototyping and tooling\u003c\/li\u003e \u003cli\u003eIndustrial platforms fitted with components suited to abrasive filaments\u003c\/li\u003e \u003cli\u003eComposite moulding, vacuum tooling and autoclave process applications\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57411058794840,"sku":"3FC250CF00BK175.75","price":76.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/3DP_FILL_01_1.jpg?v=1780303550"},{"product_id":"kimya-abs-kevlar®","title":"Kimya ABS Kevlar®","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eKimya ABS Kevlar is a composite material intended for applications requiring better mechanical strength and good resistance to friction. The addition of aramid fibres improves dimensional stability during printing and limits the shrinkage phenomena generally observed with conventional ABS.\u003cbr\u003e\u003cbr\u003eThis filament prints on an FDM machine fitted with a heated bed, ideally in an enclosed chamber in order to control thermal stresses. Its formulation also produces parts that are lighter than standard ABS while retaining properties suited to industrial uses and the manufacture of tooling.\u003c\/p\u003e\n\u003ch2\u003eApplications and\u003cimg\u003e precautions for use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis material is used for producing maintenance parts, functional prototypes, jigs or components subjected to moderate mechanical stress. The aramid fibres provide better impact resistance and help reduce warping.\u003cbr\u003e\u003cbr\u003eThe material remains sensitive to moisture and UV. Storage in a dry environment is recommended in order to preserve extrusion performance. For printing, the use of an abrasion-resistant nozzle is advised owing to the presence of reinforcing fillers.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS reinforced with aramid fibres (Kevlar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting technology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250 to 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e90 to 110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended printing speed\u003c\/th\u003e\n\u003ctd\u003e40 to 70 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.036 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGlass transition temperature (Tg)\u003c\/th\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMoisture content\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible support materials\u003c\/th\u003e\n\u003ctd\u003eHIPS, Breakaway\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint enclosure\u003c\/th\u003e\n\u003ctd\u003eRecommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll FDM \/ FFF 3D printers compatible with ABS\u003c\/li\u003e\n\u003cli\u003ePrinters fitted with a heated bed\u003c\/li\u003e\n\u003cli\u003eMachines with an enclosed or heated chamber\u003c\/li\u003e\n\u003cli\u003eCompatible with systems using HIPS or Breakaway supports\u003c\/li\u003e\n\u003cli\u003eCompatible with equipment accepting the various diameters offered by the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"Noir \/ 0.5 kg \/ 1.75 mm","offer_id":57412322754904,"sku":"3FS210KF00BK1750.5","price":48.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PS1001TQCote.jpg?v=1780652285"},{"product_id":"kimya-abs-esd","title":"KIMYA CPE","description":"\u003cp style=\"text-align: justify;\"\u003eKimya ABS-ESD is an ABS, a polymer of the styrenic family, with an added antistatic additive. Printed parts have a surface resistivity between 10⁷ and 10⁹ ohms according to ASTM D257: they dissipate electrostatic charges instead of accumulating them.\u003cbr\u003e\u003cbr\u003eThe material is intended for parts placed in contact with or close to electronic components, such as housings, holders and assembly jigs. It retains the low weight, stiffness and impact resistance of a technical ABS.\u003c\/p\u003e\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\u003cp style=\"text-align: justify;\"\u003eKimya recommends a nozzle at 260 °C, a bed between 95 and 100 °C and a speed of 25 to 50 mm\/s. Store the filament away from light, humidity and heat.\u003c\/p\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctr\u003e\u003cth\u003eMaterial\u003c\/th\u003e\u003ctd\u003eAntistatic ABS (ESD)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eTechnology\u003c\/th\u003e\u003ctd\u003eFDM\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eDiameter\u003c\/th\u003e\u003ctd\u003e1.75 mm\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePackaging\u003c\/th\u003e\u003ctd\u003e0.5 kg spool\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eSurface resistivity (ASTM D257)\u003c\/th\u003e\u003ctd\u003e10⁷ to 10⁹ ohms\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eDensity (ISO 1183-1)\u003c\/th\u003e\u003ctd\u003e1.064 g\/cm³\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eGlass transition (ISO 11357-1)\u003c\/th\u003e\u003ctd\u003e107 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eTensile modulus (ISO 527-2)\u003c\/th\u003e\u003ctd\u003e1207 MPa\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eTensile strength (ISO 527-2)\u003c\/th\u003e\u003ctd\u003e27 MPa\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eElongation at break (ISO 527)\u003c\/th\u003e\u003ctd\u003e5.7 %\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eFlexural modulus (ISO 178)\u003c\/th\u003e\u003ctd\u003e975 MPa\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eNotched Charpy impact strength (ISO 179-1\/1eA)\u003c\/th\u003e\u003ctd\u003e13.3 kJ\/m²\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eShore hardness (ISO 868)\u003c\/th\u003e\u003ctd\u003e64.1 D\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eExtrusion temperature\u003c\/th\u003e\u003ctd\u003e260 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eBed temperature\u003c\/th\u003e\u003ctd\u003e95 to 100 °C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003ePrint speed\u003c\/th\u003e\u003ctd\u003e25 to 50 mm\/s\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003cth\u003eCompliance\u003c\/th\u003e\u003ctd\u003eREACH, RoHS\u003c\/td\u003e\u003c\/tr\u003e\u003c\/table\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eFDM 3D printers accepting 1.75 mm filament\u003c\/li\u003e\u003cli\u003ePrint head able to reach 260 °C\u003c\/li\u003e\u003cli\u003eHeated bed reaching 100 °C\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"Noir \/ 0.5 kg \/ 1.75 mm","offer_id":57412471325016,"sku":"3FS250NF00BK1750.5","price":46.0,"currency_code":"EUR","in_stock":true},{"title":"Blanc \/ 0.5 kg \/ 1.75 mm","offer_id":57412471357784,"sku":"3FS250NF00NT1750.5","price":46.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PS1007TQ_Cote.jpg?v=1780652835"},{"product_id":"kimya-abs-r","title":"Kimya ABS-R","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eKimya's ABS-R filament is a technical material made from recycled materials, intended for industrial applications and functional prototyping. Its formulation retains the properties expected of an ABS, with good impact resistance, rigidity suited to mechanical uses and heat resistance of around 90 °C.\u003cbr\u003e\u003cbr\u003ePrinting requires a heated bed and benefits from an enclosed environment in order to limit shrinkage and warping phenomena. The use of a heated chamber improves thermal stability during the manufacture of bulky or technical parts.\u003c\/p\u003e \u003ch2\u003eApplications and use\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eABS-R is used for manufacturing jigs, tooling, functional prototypes and end-use parts. Its positioning is aimed at production environments looking for a recyclable material while retaining mechanical characteristics suited to the common constraints of FDM printing.\u003cbr\u003e\u003cbr\u003eTo optimise first-layer adhesion, the use of a plate adhesive may be recommended. The material complies with REACH and RoHS regulations.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRecycled ABS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting technology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250 to 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e90 to 110 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eChamber temperature\u003c\/th\u003e\n\u003ctd\u003e20 to 80 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e25 to 50 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eShore hardness\u003c\/th\u003e\n\u003ctd\u003e72.2D\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eAround 90 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProperties\u003c\/th\u003e\n\u003ctd\u003eImpact resistance, high temperature, recycled \/ recyclable\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSpool\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eAll FDM \/ FFF 3D printers compatible with ABS\u003c\/li\u003e \u003cli\u003eMachines fitted with a heated bed\u003c\/li\u003e \u003cli\u003ePrinters with an enclosed or heated chamber\u003c\/li\u003e \u003cli\u003eEquipment accepting the various diameters offered by the manufacturer\u003c\/li\u003e \u003cli\u003eCompatible with prototyping, tooling and functional-part production applications\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57412482236760,"sku":"3FS200NF00BK175.75","price":20.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/11169.webp?v=1780317016"},{"product_id":"kimya-abs-s","title":"KIMYA ABS-S","description":"\u003ch2\u003eIndustrial applications and material behaviour\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eKimya ABS-S filament is intended for professional applications requiring a combination of rigidity, impact resistance and thermal resistance. It is commonly used for producing functional prototypes, tooling, technical components or end-use parts in sectors such as household appliances or telephony.\u003cbr\u003e\u003cbr\u003eIts formulation also produces an even surface finish and facilitates post-processing operations. The material is compatible with food-contact requirements according to the certifications indicated by the manufacturer.\u003c\/p\u003e \u003ch2\u003eUse in FDM printing\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eABS-S requires a heated bed and high extrusion temperatures in order to ensure good inter-layer adhesion and to limit the shrinkage phenomena inherent to ABS materials. It is available in several diameters and pack sizes in order to fit into different production environments. The material complies with RoHS and REACH regulations and remains compatible with most FDM printers on the market accepting the diameters offered.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ Fused filament deposition\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS-S\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250 to 270 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e85 to 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e20 to 60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProperties\u003c\/th\u003e\n\u003ctd\u003eImpact resistance, high temperature\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFood-contact certification\u003c\/th\u003e\n\u003ctd\u003eEU 10\/2011, FDA 21 CFR\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eRoHS, REACH\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eSpool\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003ePrototype, tooling, end-use part\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers compatible with ABS filaments\u003c\/li\u003e \u003cli\u003eSystems fitted with a heated bed\u003c\/li\u003e \u003cli\u003ePrinters accepting the diameters available in the Kimya ABS-S range\u003c\/li\u003e \u003cli\u003eCompatible with most professional FDM printers on the market\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57412550230360,"sku":"3FS210NF00BK175.75","price":21.35,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Blanc","offer_id":57412550263128,"sku":"3FS210NF00WH175.75","price":21.35,"currency_code":"EUR","in_stock":true},{"title":"2.2 kg \/ 1.75 mm \/ Noir","offer_id":57412550295896,"sku":"3FS210NF00BK1752.2","price":58.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PS2015TQ_Cote.jpg?v=1780652624"},{"product_id":"kimya-asa-s","title":"KIMYA ASA-S","description":"\u003ch2\u003ePrinting behaviour and environmental resistance\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eKimya ASA-S belongs to the family of styrenic polymers and has mechanical properties close to ABS while offering better resistance to UV radiation and weather conditions. This characteristic allows it to be used for parts intended to remain outdoors over the long term, notably in the automotive, marine or technical-equipment sectors exposed to the weather.\u003cbr\u003e\u003cbr\u003eIts formulation is also suited to applications requiring good thermal resistance and abrasion resistance. The material complies with RoHS and REACH regulations according to the data provided by the manufacturer.\u003c\/p\u003e \u003ch2\u003eUse in additive manufacturing\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePrinting the ASA-S filament requires a heated bed as well as high extrusion temperatures in order to limit shrinkage and ensure controlled inter-layer adhesion. The material is available in several diameters and colours in order to suit different production environments. Its behaviour makes it suitable for producing functional prototypes, technical housings, maintenance parts or components intended for prolonged outdoor use.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eASA-S\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.056 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMelt flow index (MFI)\u003c\/th\u003e\n\u003ctd\u003e4 to 10 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eGlass transition temperature (Tg)\u003c\/th\u003e\n\u003ctd\u003e108 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMoisture content\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.5 %\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e240 to 260 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e90 to 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e20 to 60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile modulus of elasticity\u003c\/th\u003e\n\u003ctd\u003e1,685 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e38.8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile stress at break\u003c\/th\u003e\n\u003ctd\u003e34.6 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e4.3 %\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural modulus of elasticity\u003c\/th\u003e\n\u003ctd\u003e1,662 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCharpy impact strength\u003c\/th\u003e\n\u003ctd\u003e13 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eShore hardness\u003c\/th\u003e\n\u003ctd\u003e74D\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eRoHS, REACH\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers compatible with ASA\u003c\/li\u003e \u003cli\u003eMachines fitted with a heated bed\u003c\/li\u003e \u003cli\u003eSystems accepting the diameters available in the Kimya ASA-S range\u003c\/li\u003e \u003cli\u003eProfessional FDM printers intended for high-temperature technical materials\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"Blanc \/ 0.5 kg \/ 1.75 mm","offer_id":57412570841432,"sku":"3FS310NF00NT1750.5","price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PS1009TQcote.jpg?v=1780652729"},{"product_id":"kimya-pa6-co","title":"KIMYA PA6-CO","description":"\u003ch2\u003eMaterial behaviour and functional applications\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eKimya PA6-CO is a copolymer derived from Nylon 6 designed for the additive manufacturing of technical parts. This unfilled polyamide has high tensile strength, good wear resistance as well as thermal resistance suited to industrial environments. Its low tendency to warp makes it easier to produce dimensionally stable parts, including on equipment without a heated chamber.\u003cbr\u003e\u003cbr\u003eThe material is used for the production of tooling, functional prototypes and parts intended for end use in the industrial and automotive sectors. Its mechanical strength also allows the manufacture of components subjected to repeated stress.\u003c\/p\u003e \u003ch2\u003eUse and storage precautions\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePrinting PA6-CO requires high extrusion temperatures as well as a heated bed in order to optimise inter-layer adhesion and cohesion. Like all polyamide materials, it is sensitive to moisture and must be stored away from water, heat and light in order to preserve its extrusion properties. The filament is available in several diameters and pack sizes to suit the various FDM production environments.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePA6-CO (Nylon 6-based copolyamide)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.157 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMelt flow index (MFI)\u003c\/th\u003e\n\u003ctd\u003e24 to 28 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eGlass transition temperature (Tg)\u003c\/th\u003e\n\u003ctd\u003e65 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMelting temperature (Tm)\u003c\/th\u003e\n\u003ctd\u003e227 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e260 to 290 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e75 to 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e40 to 70 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile modulus\u003c\/th\u003e\n\u003ctd\u003e2,166 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e56.1 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e16.2 %\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2,017 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCharpy impact strength\u003c\/th\u003e\n\u003ctd\u003e3.9 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eShore hardness\u003c\/th\u003e\n\u003ctd\u003e77.3\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProperties\u003c\/th\u003e\n\u003ctd\u003eHigh mechanical strength, low warping, wear resistance, high temperature\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003eTooling, functional prototyping, end-use part\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers compatible with polyamide\u003c\/li\u003e \u003cli\u003eMachines fitted with a heated bed\u003c\/li\u003e \u003cli\u003ePrinters accepting the diameters available in the Kimya PA6-CO range\u003c\/li\u003e \u003cli\u003eProfessional FDM systems dedicated to high-temperature technical materials\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"Noir \/ 0.75 kg \/ 1.75 mm","offer_id":57412697555288,"sku":"3FA410NF00BK175.75","price":74.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PA6-CO-HD_5.jpg?v=1780653052"},{"product_id":"kimya-pc-fr","title":"KIMYA PC-FR","description":"\u003ch2\u003eThermal resistance and flame-retardant properties\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eKimya PC-FR is an amorphous polycarbonate-based thermoplastic incorporating flame-retardant properties suited to environments subject to regulatory constraints. It retains the mechanical characteristics of polycarbonate, notably good impact resistance, controlled dimensional stability and a wide operating temperature range.\u003cbr\u003e\u003cbr\u003eThe material meets the requirements of the EN 45545 railway standard and is used for manufacturing technical parts intended for the transport, electrical, electronics or industrial sectors. Its formulation also complies with REACH and RoHS regulations.\u003c\/p\u003e \u003ch2\u003eUse and printing conditions\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePC-FR requires high extrusion temperatures as well as a heated bed in order to obtain optimal adhesion and to limit the internal stresses linked to cooling. Its good dimensional stability allows the production of functional parts, production components and prototypes subjected to thermal or mechanical stress. The filament is available in several diameters and pack sizes according to manufacturing needs.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eFlame-retardant polycarbonate (PC-FR)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM \/ FFF\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.31 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMoisture content\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 0.5 %\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMelt flow index (MFI)\u003c\/th\u003e\n\u003ctd\u003e4.2 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eGlass transition temperature (Tg)\u003c\/th\u003e\n\u003ctd\u003e117 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003eAround 300 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003eAround 115 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eChamber temperature\u003c\/th\u003e\n\u003ctd\u003eAround 100 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e50 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eProperties\u003c\/th\u003e\n\u003ctd\u003eFlame-retardant, impact resistance, dimensional stability, high temperature\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFire standard\u003c\/th\u003e\n\u003ctd\u003eEN 45545\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eOperating temperature range\u003c\/th\u003e\n\u003ctd\u003e-80 to 105 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers compatible with polycarbonate\u003c\/li\u003e \u003cli\u003eMachines fitted with a high-temperature heated bed\u003c\/li\u003e \u003cli\u003eSystems with a heated or enclosed chamber\u003c\/li\u003e \u003cli\u003ePrinters accepting the diameters available in the Kimya PC-FR range\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"Light Grey \/ 0.75 kg \/ 1.75 mm","offer_id":57412761190744,"sku":"3FC320NF00GY175.75","price":94.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/181022-0006.jpg?v=1780653173"},{"product_id":"kimya-pc-s","title":"KIMYA PC-S","description":"\u003ch2\u003ePrinting behaviour and technical applications\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eKimya's PC-S is a polycarbonate filament designed for producing functional parts requiring high heat resistance as well as good mechanical rigidity. Its formulation is suited to the engineering, industrial, automotive or aerospace sectors for the production of technical components, casings, protective elements or functional validation parts.\u003cbr\u003e\u003cbr\u003eThis material can be sterilised and holds food-contact certifications. Its thermal resistance up to 140 °C allows it to be used in environments where standard materials such as PLA or PETG reach their limits.\u003c\/p\u003e \u003ch2\u003eUse and precautions\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePrinting PC-S requires high extrusion temperatures as well as a heated bed in order to limit shrinkage phenomena and ensure correct adhesion of the first layers. The material is available in several diameters in order to suit the various professional FDM printer ecosystems. It complies with REACH and RoHS regulations for easier integration into industrial environments.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePolycarbonate (PC)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePolymer type\u003c\/th\u003e\n\u003ctd\u003eAmorphous thermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g on a spool\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters available\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e280 to 320 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e100 to 120 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e40 to 70 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.193 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMelt flow index (MFI)\u003c\/th\u003e\n\u003ctd\u003e25.5 g\/10 min\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMoisture content\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 1 %\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaximum service temperature\u003c\/th\u003e\n\u003ctd\u003e140 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile modulus\u003c\/th\u003e\n\u003ctd\u003e2,172 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e53.8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e1,640 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCharpy impact strength\u003c\/th\u003e\n\u003ctd\u003e7 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eShore hardness\u003c\/th\u003e\n\u003ctd\u003e79.2 D\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eCertifications\u003c\/th\u003e\n\u003ctd\u003eEU 10\/2011, FDA 21 CFR, REACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFeatures\u003c\/th\u003e\n\u003ctd\u003eSterilisable, food-contact compatible\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eFDM 3D printers compatible with polycarbonate\u003c\/li\u003e \u003cli\u003ePrinters fitted with a high-temperature nozzle\u003c\/li\u003e \u003cli\u003eSystems accepting the available filament diameters\u003c\/li\u003e \u003cli\u003eProfessional and industrial machines requiring high-performance technical materials\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Transparent","offer_id":57413250384216,"sku":"3FC330NF00CL175.75","price":47.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PC1001TQCote.jpg?v=1780653273"},{"product_id":"kimya-peba-s","title":"KIMYA PEBA-S","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePEBA-S prints at an extrusion temperature of between 240 and 250 °C, on a bed heated to between 85 and 95 °C. The printing speed should remain moderate, of the order of 44 to 50 mm\/s, and cooling can be disabled depending on part geometry in order to preserve inter-layer adhesion.\u003cbr\u003e\u003cbr\u003eAlthough soft materials favour direct-drive extrusion, its formulation remains compatible with Bowden-type extruders at reduced speed. Pre-drying is advised, with the residual moisture content needing to remain below 1 % to ensure steady extrusion.\u003c\/p\u003e\n\n\u003ch2\u003eProperties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eA lightweight technical elastomer, PEBA-S combines high energy return and non-slip properties close to those of silicone, which sets it apart from other flexible filaments such as TPU. Its low-temperature resistance and its no-break impact resistance make it a material suited to the manufacture of soles, damping parts and sports equipment (cycling, golf, protective gear), as well as to the prototyping of soft components.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePEBA (polyether block amide), thermoplastic elastomer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePolymer base\u003c\/th\u003e\n\u003ctd\u003ePEBAX® resin (Arkema)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e93 Shore A (ISO 868)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.013 g\/cm³ (ISO 1183-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003e1.75 mm or 2.85 mm (±0.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMelting temperature (Tm)\u003c\/th\u003e\n\u003ctd\u003e149 °C (ISO 11357-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMelt flow index (MFI, 220 °C – 10 kg)\u003c\/th\u003e\n\u003ctd\u003e13.6 g\/10min (ISO 1133-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e240–250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e85–95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrinting speed\u003c\/th\u003e\n\u003ctd\u003e44–50 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus\u003c\/th\u003e\n\u003ctd\u003e63 MPa (ISO 37\/2\/500)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e32.8 MPa (ISO 37\/2\/500)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 550 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e70 MPa (ISO 178)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharpy impact strength\u003c\/th\u003e\n\u003ctd\u003eNo break (ISO 179-1\/1eA)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMoisture content\u003c\/th\u003e\n\u003ctd\u003e\u0026lt; 1 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e500 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eRoHS, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWarranty\u003c\/th\u003e\n\u003ctd\u003e2 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm or 2.85 mm filament\u003c\/li\u003e\n  \u003cli\u003eDirect-drive extrusion recommended for flexible materials\u003c\/li\u003e\n  \u003cli\u003eUsable with Bowden-type extruders, at reduced speed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"Transparent \/ 0.5 kg \/ 1.75 mm","offer_id":57421567492440,"sku":"3FE310NF00CL1750.5","price":49.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PA1001TQCote.jpg?v=1780653369"},{"product_id":"kimya-pei-support","title":"KIMYA PEI Support","description":"\u003ch2\u003eFunction and use\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eDesigned as a breakaway support material, Kimya PEI Support is used as a second extrusion with the Kimya PEI-1010 and PEI-9085 model filaments, based on SABIC ULTEM. Its high-temperature resistance allows it to follow the demanding print parameters of these technical polymers.\u003cbr\u003e\u003cbr\u003eThe adhesion between the support and the model material remains sufficient during printing, while allowing manual removal at room temperature, without bath or solvent. Contact areas thus retain a smooth finish on the final part.\u003c\/p\u003e\n\u003ch2\u003eIdentification and storage\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eIts natural translucent tint contrasts with the amber appearance of PEI filaments, which makes it easier to locate the support areas to be removed after printing. The filament must be stored away from light, moisture and heat in order to preserve its original properties.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003ctd\u003eBreakaway support filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePEI (support for ULTEM-based models)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRemoval method\u003c\/th\u003e\n\u003ctd\u003eMechanical, at room temperature, without chemical dissolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eHigh-temperature resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM, dual extrusion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e0.5 or 1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003eAway from light, moisture and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDual-extrusion FDM printers suited to high-temperature polymers\u003c\/li\u003e\n\u003cli\u003eOptimised for Kimya PEI-1010 and Kimya PEI-9085 filaments, based on SABIC ULTEM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kimya","offers":[{"title":"0.5 kg \/ 1.75 mm \/ Nature","offer_id":57421648920920,"sku":"3FH610NF00NT1.750.5","price":89.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Nature","offer_id":57421600096600,"sku":"3FH610NF00NT1.751.0","price":160.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/soutien-de-kimya-pei.jpg?v=1780414445"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_FDM_header_collection.webp?v=1779372506","url":"https:\/\/3dprint.shop\/en\/collections\/filaments.oembed?page=6","provider":"3Dprint.shop","version":"1.0","type":"link"}