{"title":"Consumables","description":"","products":[{"product_id":"ultracur3d®-rg-3280","title":"Ultracur3D® RG 3280","description":"\u003ch2\u003eFunctional applications and mechanical behaviour\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eUltracur3D RG 3280 is a composite resin intended for applications requiring high rigidity and good thermal resistance. Its high ceramic particle loading yields parts exhibiting a high modulus and excellent dimensional stability after curing.\u003cbr\u003e\u003cbr\u003eThis material is particularly suited to the production of tooling, moulds, inspection jigs, technical fixtures, and test models subjected to demanding thermal environments. Its mechanical behaviour positions it among the technical resins intended for industrial use and functional prototypes.\u003c\/p\u003e \u003ch2\u003eProcessing and post-treatment\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003eDespite its high mineral filler content, the resin maintains a relatively low viscosity and good vat stability, limiting particle settling during printing. This characteristic supports consistent production on compatible photopolymerisation equipment.\u003cbr\u003e\u003cbr\u003eAfter printing, parts require cleaning and UV curing in accordance with the manufacturer's recommendations to achieve the expected mechanical and thermal performance. The resin is available in different references according to supply requirements.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003ePrinting technology\u003c\/th\u003e\n\u003ctd\u003eSLA, DLP, MSLA\/LCD\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eCeramic-filled photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile modulus\u003c\/th\u003e\n\u003ctd\u003e10,300 – 10,600 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e70 – 87 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e1.3%\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e8,780 – 8,800 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e73 – 78 MPa\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.73 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eViscosity\u003c\/th\u003e\n\u003ctd\u003e230 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eHeat deflection temperature (HDT 0.45 MPa)\u003c\/th\u003e\n\u003ctd\u003e280 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eHeat deflection temperature (HDT 1.8 MPa)\u003c\/th\u003e\n\u003ctd\u003e132 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDimensional accuracy\u003c\/th\u003e\n\u003ctd\u003e±0.2% (minimum ±0.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMinimum wall thickness\u003c\/th\u003e\n\u003ctd\u003e0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eRecommended layer height\u003c\/th\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eVat stability\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eSLA resin 3D printers\u003c\/li\u003e \u003cli\u003eDLP resin 3D printers\u003c\/li\u003e \u003cli\u003eMSLA \/ LCD 405 nm resin 3D printers\u003c\/li\u003e \u003cli\u003eProfessional photopolymerisation systems compatible with filled technical resins\u003c\/li\u003e \u003c\/ul\u003e","brand":"BASF","offers":[{"title":"3.64lb","offer_id":57268483293528,"sku":"300330","price":310.0,"currency_code":"EUR","in_stock":true},{"title":"8.25kg","offer_id":57268483326296,"sku":"300331","price":782.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ultracur3d-rg-3280-basf-1-65-kg.jpg?v=1778504547"},{"product_id":"petgforce-1-75mm-1kg-noir-charges-speciaux","title":"PETGForce Filled \u0026 Specialty","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePETG Force combines a PETG matrix with a composite reinforcement loaded with glass fibre and carbon fibre to produce technical parts exhibiting high rigidity and good mechanical strength. This material is suited to industrial applications, functional prototyping, and structural elements requiring enhanced dimensional stability.\u003cbr\u003e\u003cbr\u003eThe filament requires the use of a steel or stainless steel nozzle with a recommended minimum diameter of 0.6 mm due to its abrasive nature. However, the external coating technology developed by the manufacturer limits wear on extrusion components and facilitates its use across a wide range of professional FDM printers.\u003c\/p\u003e \u003ch2\u003eStorage and processing\u003c\/h2\u003e \u003cp style=\"text-align: justify;\"\u003ePETG Force exhibits slight moisture sensitivity due to its PETG base. Storage in a dry environment with desiccant is recommended to preserve extrusion regularity and the material's mechanical properties. Printing is carried out on a heated build plate with standard adhesion and may require the addition of a brim depending on part geometry.\u003c\/p\u003e \u003ch2\u003eTechnical specifications\u003c\/h2\u003e \u003ctable\u003e \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG reinforced with glass fibre and carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003e20% glass fibre + 10% carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eRecommended extrusion temperature\u003c\/th\u003e\n\u003ctd\u003e245 to 265 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e65 to 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eSteel or stainless steel mandatory\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMinimum recommended nozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.6 mm\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eStandard\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eRecommended bed configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate, brim possible\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.26 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eGlass transition\u003c\/th\u003e\n\u003ctd\u003e75 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eMelting temperature\u003c\/th\u003e\n\u003ctd\u003e250 °C\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eAs per manufacturer variants\u003c\/td\u003e\n\u003c\/tr\u003e \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003eAs per manufacturer variants\u003c\/td\u003e\n\u003c\/tr\u003e \u003c\/table\u003e \u003ch2\u003eCompatibility\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eAll FDM 3D printers compatible with abrasive technical filaments\u003c\/li\u003e \u003cli\u003ePrinters equipped with a steel or stainless steel nozzle\u003c\/li\u003e \u003cli\u003eExtrusion systems compatible with fibre-filled PETG\u003c\/li\u003e \u003cli\u003eCompatible with heated build plates\u003c\/li\u003e \u003c\/ul\u003e","brand":"Tag 3D","offers":[{"title":"Noir \/ 2.2 lbs \/ 1.75 mm","offer_id":57385026093400,"sku":"CHA5381","price":76.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/petgforce-1.75mm-1kg-noir-3.jpg?v=1779955587"},{"product_id":"silk-ultra-1kg-aluminium","title":"SILK Ultra","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA SILK Ultra prints at 210 °C on a lacquered build plate heated to 50 °C, without an enclosed chamber. Rated \"easy\" in terms of difficulty, it accepts any nozzle type and exhibits strong adhesion on lacquered build plates, simplifying first-layer initiation and limiting warping defects.\u003cbr\u003e\u003cbr\u003eUnlike the standard PLA Ultra range, the SILK formulation does not support post-treatment by annealing: parts retain the mechanical properties of a standard PLA. For parts requiring high thermal resistance, a recurable Ultra reference from the range should be preferred.\u003c\/p\u003e\n\u003ch2\u003eApplications and surface finish\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe SILK formulation produces a bright metallic effect with anisotropic highlights, particularly suited to decorative parts, architectural models, communication prototypes, commercial presentations, design objects, and interior furnishing elements. The surface finish, described as excellent by the manufacturer, partially masks layer lines when lighting plays on the orientation of layers, and remains consistent across the entire spool for large-format prints.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA (polylactic acid) with metallic effect\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003ctd\u003ePLA Ultra SILK\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate type\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty level\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent, brushed metallic effect\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAnnealing\u003c\/th\u003e\n\u003ctd\u003eNot recommended for the SILK range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting PLA\u003c\/li\u003e\n  \u003cli\u003eCompatible with any nozzle type (brass, hardened steel, hardened)\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream printers on lacquered build plate\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ 1.75 mm \/ Aluminium","offer_id":57383979614552,"sku":"SPEC5399","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/silk-ultra-1kg-aluminium-3.jpg?v=1779919587"},{"product_id":"hardflex-ultra-750g-noir","title":"HARDFLEX Ultra","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHARDFLEX Ultra prints at 235 °C on a build plate heated to 95 °C. Its Shore 83D hardness places it in the category of rigid TPUs, closer to a technical thermoplastic than a soft elastomer: extrusion is more stable than with Shore A TPUs, which simplifies passage through the melt chamber and allows use on a broader range of extruders.\u003cbr\u003e\u003cbr\u003eThe requirement for a heavily heated build plate does however mean the machine must be equipped with a high-temperature heated bed and, preferably, a stabilised enclosure to limit thermal differentials during printing of large parts.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eA proven production-oriented formulation, this rigid TPU combines mechanical strength and thermal resistance for functional parts subject to repeated constraints: hard damping elements, technical stops, wear parts, structural supports, jigs, and industrial components requiring a combination of impact resistance and rigidity. It complements a range of Shore A flexible materials by providing significantly greater hardness, intermediate between standard TPUs and engineering thermoplastics.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPU (thermoplastic polyurethane), rigid variant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 83D\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeated build plate\u003c\/th\u003e\n\u003ctd\u003eRequired\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM printers accepting extrusion at 235 °C\u003c\/li\u003e\n  \u003cli\u003eHeated build plate capable of reaching 95 °C\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream printers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Noir \/ 0.75 kg \/ 1.75 mm","offer_id":57383972372824,"sku":"SPEC3623","price":41.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/hardflex-ultra-750g-noir-3.jpg?v=1779919237"},{"product_id":"volumic-universal-ultra","title":"UNIVERSAL Ultra PLC – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eUNIVERSAL ULTRA is a composite filament based on polylactic acid compound (PLC – Polylactic Acid Compound) developed by Volumic, positioned as a versatile material covering most workshop requirements in a single consumable. It combines the ease of processing of traditional PLA with a significantly higher level of mechanical and thermal performance: sustained mechanical strength, high rigidity, thermal resistance up to 160 °C peak and 115 °C continuous.\u003cbr\u003e\u003cbr\u003eThe material is also FDA-approved for food contact (to be validated according to the intended application) and remains biodegradable, two advantages directly exploitable in container prototyping, laboratory equipment, and short-life functional parts. Multiple colours are available in the range.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUNIVERSAL ULTRA prints at a recommended nozzle temperature of 225 °C on a heated build plate at 60 °C, and is compatible with all nozzle materials (brass, copper\/nickel, steel). Its build plate adhesion is rated ultra-strong, to be used on a very lightly lacquered build plate to preserve ease of removal at the end of printing. The processing difficulty is rated \"very easy\" by the manufacturer, making it a suitable consumable even for beginner operators or multi-machine production lines requiring a robust consumable without complex parameter configuration.\u003c\/p\u003e\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with desiccant after opening, to preserve extrusion properties. Technical data sheet and safety data sheet (MSDS \/ SDS) available from the distributor for integration into HSE procedures and workshop documentation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLC – Polylactic Acid Compound (technical PLA composite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg or 2.3 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 160 °C peak \/ 115 °C continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll (brass, copper\/nickel, steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eUltra-strong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eVery lightly lacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eVery easy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial characteristics\u003c\/th\u003e\n\u003ctd\u003eHigh mechanical strength, high rigidity, biodegradable, FDA food-contact approved\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable documentation\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS \/ SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n\u003cli\u003eOptimised for Volumic Stream, SH, and EXO printers\u003c\/li\u003e\n\u003cli\u003eCompatible with professional FDM printers capable of printing technical PLA (Prusa, Bambu Lab, Creality, etc.)\u003c\/li\u003e\n\u003cli\u003eApplications: functional prototyping, common mechanical parts, workshop jigs, containers and laboratory equipment (FDA validation according to use), parts requiring moderate thermal resistance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Black \/ 1000","offer_id":56893927784792,"sku":"UNIV1130","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"White \/ 1000","offer_id":56893927850328,"sku":"UNIV3047","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Money \/ 1000","offer_id":56893928145240,"sku":"UNIV1128","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Blue \/ 1000","offer_id":56893927915864,"sku":"UNIV1127","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Yellow \/ 1000","offer_id":56893927981400,"sku":"UNIV3048","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Natural \/ 1000","offer_id":56893928014168,"sku":"UNIV1129","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Red \/ 1000","offer_id":56893928046936,"sku":"UNIV1126","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Green \/ 1000","offer_id":56893928079704,"sku":"UNIV3049","price":58.8,"currency_code":"EUR","in_stock":true},{"title":"Black \/ 2300","offer_id":56893927817560,"sku":"UNIV5628","price":109.0,"currency_code":"EUR","in_stock":true},{"title":"Money \/ 2300","offer_id":56893927883096,"sku":"UNIV5630","price":109.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/universal-ultra-1kg-noir-3.jpg?v=1779781330"},{"product_id":"filament-pc-pbt-gf-treed-dark-grey","title":"TreeD PC PBT GF Filament – Dark Grey","description":"\u003cp\u003ePCPBT GF glass fibre-reinforced filament \"DimensionMaster\" — Discover our PCPBT filament with high-quality glass fibres. Through our precise blending process, we guarantee uniform fibre distribution throughout the polymer, achieving superior mechanical strength and dimensional stability compared to competitors' filaments. We use only high-quality additives and glass fibres, delivering superior mechanical, thermal, and chemical resistance properties. We offer the widest range of filament colours and diameters to meet the needs of a broader customer base. Our attention to filament quality control ensures that every spool meets the required technical specifications and is ready for 3D printing.\u003c\/p\u003e","brand":"TreeD","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Grey","offer_id":57518434615640,"sku":"PCPBTGF-7016-750-175","price":41.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/PCPBTGF.jpg?v=1781528665"},{"product_id":"volumic-flex-ultra-750g","title":"Flex93 Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eFlex93 ULTRA is a flexible TPU (Thermoplastic PolyUrethane) filament developed by Volumic, with a Shore hardness of 93A. Its distinguishing feature is an extrusion behaviour optimised for high print speeds: it prints at up to 60 mm\/s, on a par with standard PLA, whereas most flexible materials require a significant speed reduction to avoid flow defects.\u003cbr\u003e\u003cbr\u003eIts Shore 93A hardness places it in the semi-rigid TPU category, suited to parts requiring a combination of flexibility, tear resistance, and fatigue strength: seals, shock absorbers, bellows, ergonomic prototypes, protective covers, technical soles. Multiple colours are available in the range.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFlex93 ULTRA prints at a recommended nozzle temperature of 235 °C on a heated build plate at 45 °C, with a brass or copper nozzle. Its strong build plate adhesion allows printing directly on a clean or lacquered build plate (lacquer such as 3DLac) without complex preparation, and its processing difficulty is rated \"easy\" by the manufacturer, making it an accessible consumable even for operators not specialised in flexible materials.\u003c\/p\u003e\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eTPU is hygroscopic: store the spool in a dry environment, in a resealable bag with desiccant, to preserve extrusion properties after opening. Technical data sheet and safety data sheet (MSDS \/ SDS) available from the distributor for integration into HSE procedures and workshop documentation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTPU (Thermoplastic PolyUrethane) – flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 93A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended bed temperature\u003c\/th\u003e\n\u003ctd\u003e45 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eBrass or copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003eUp to 60 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eClean build plate or lacquered build plate (3DLac)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable documentation\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS \/ SDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll 1.75 mm FDM printers capable of printing TPU\/flexible filaments\u003c\/li\u003e\n\u003cli\u003eOptimised for Volumic Stream, SH, and EXO printers\u003c\/li\u003e\n\u003cli\u003eCompatible with professional FDM printers equipped with a Direct Drive extruder\u003c\/li\u003e\n\u003cli\u003eApplications: seals, shock absorbers, bellows, ergonomic prototypes, protective covers, technical flexible parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"Red \/ 750","offer_id":57001246720344,"sku":"FLXV1067","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"Blue \/ 750","offer_id":57001246753112,"sku":"FLXV1068","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"Black \/ 750","offer_id":57001246785880,"sku":"FLXV968","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"Green \/ 750","offer_id":57001246818648,"sku":"FLXV967","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/flex93-ultra-750g-rouge-3.jpg?v=1779779836"},{"product_id":"prusament-petg-900g-refill-nfc-compatible","title":"Prusament PETG 900 g Refill (NFC Compatible)","description":"\u003ch1\u003ePrusament PETG\u003c\/h1\u003e\n\u003cp\u003ePrusament PETG is a 3D filament manufactured in-house by Prusa Research, the Czech 3D printer manufacturer that operates its own extrusion line. The Prusament brand is positioned in the professional and prosumer segment, with control of the chain from polymer granule to spooling. Each spool undergoes individual inspection (diameter, chromatic consistency, mechanical properties) and its manufacturing parameters are viewable online via a unique spool identifier. The stated diameter tolerance is ±0.02 mm, versus 0.05 mm for the usual market standard.\u003c\/p\u003e\n\u003cp\u003ePETG (polyethylene terephthalate glycol) is a thermoplastic valued for its toughness and ductility, superior to PLA whilst remaining simpler to print than ABS. It offers good interlayer adhesion, which suits it to functional parts subject to moderate mechanical stress: brackets, fixings, flanges, technical enclosures. The material's low thermal expansion limits warping, even on large parts printed without an enclosed chamber. PETG also provides acceptable sealing for both indoor and outdoor applications.\u003c\/p\u003e\n\u003cp\u003eFor printing, FFF\/FDM technology should be configured at 250 °C nozzle temperature and 70 to 90 °C on the heated build plate. A textured or satin steel sheet is recommended. Before each print, verify the cleanliness of the build plate surface. As PETG is hygroscopic, store the spool in an airtight container with desiccant after opening; in the event of moisture absorption (bubbles during extrusion, surface quality degradation), dry according to the manufacturer's procedure. Enable retraction to limit stringing, which is the main extrusion defect of this material.\u003c\/p\u003e\n\u003cp\u003eRecommended for the production of functional parts, workshop jigs, watertight prototypes, mechanical supports, parts intended for outdoor use, and large parts sensitive to warping. Not recommended for parts requiring a high level of fine detail (prefer PLA), for long bridges without support (poor bridging characteristics), for food-contact applications without additional certification, or for parts subject to high continuous-service temperatures.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG (polyethylene terephthalate glycol)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003eIn-house production, Czech Republic\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFilament diameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e70 to 90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended sheet\u003c\/th\u003e\n\u003ctd\u003eTextured or satin steel (powder coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code per spool, parameters viewable online\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e3D printers using FFF\/FDM technology with 1.75 mm filament\u003c\/li\u003e\n  \u003cli\u003eOriginal Prusa printers (MK3S+, MK4, MINI+, XL, CORE One)\u003c\/li\u003e\n  \u003cli\u003ePrusa textured and satin steel sheets (powder coating)\u003c\/li\u003e\n  \u003cli\u003eRefill packaging NFC-compatible with existing Prusament spool flanges\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"Anthracite Grey","offer_id":57202747343192,"sku":"IDF__17613_IDS__3546","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"Jet Black","offer_id":57202747375960,"sku":"IDF__17599_IDS__3542","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Urban Grey","offer_id":57202747408728,"sku":"IDF__17689_IDS__3544","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Clear","offer_id":57202747441496,"sku":"IDF__17615_IDS__3547","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"Signal White","offer_id":57202747474264,"sku":"IDF__17691_IDS__3543","price":23.5,"currency_code":"EUR","in_stock":true},{"title":"Galaxy Black","offer_id":57272955240792,"sku":"IDF__17692_IDS__3545","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/61e65595-f5f6-467a-951a-882210fc0adb.jpg?v=1778574594"},{"product_id":"prusament-pla-nfc","title":"Prusament PLA (NFC)","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA is a filament manufactured in-house by Prusa Research at its factories in the Czech Republic and Delaware. It is available in a wide palette of colours, including solid matt to satin shades, multi-pigment blends, and glitter-effect variants. Each spool is inspected to meet a dimensional tolerance of ±0.02 mm, with continuous measurement of diameter and ovality along the entire length. Actual manufacturing data (diameter readings, ovality, weight) are recorded and provided per batch, enabling full spool traceability. Colour consistency is guaranteed by a documented spectroscopic recipe and per-batch inspection before despatch.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA extrudes at 215 °C on a heated build plate between 50 and 60 °C, without the need for an enclosed chamber. Its limited shrinkage allows the printing of large or multi-part assemblies without significant deformation, as well as the reproduction of fine geometries, bridges, and overhangs thanks to low-temperature melting combined with rapid cooling. For parts subject to mechanical stress or exposed to elevated temperatures, PETG, ASA, or a PC Blend remains preferable. The material is hard and difficult to sand.\u003c\/p\u003e\n\u003ch2\u003eSpool and NFC identification\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament is delivered on a redesigned spool incorporating a rewritable NFC tag to the open OpenPrintTag standard. This tag contains essential material information and can be read by the Prusa mobile app in offline mode, without dependency on a cloud service. The spool is produced under controlled tension winding and undergoes a final inspection before despatch.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available (solids, blends, glitter effect)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended print sheet\u003c\/th\u003e\n\u003ctd\u003eSmooth PEI, textured, or satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\u003ctd\u003e0.4 mm brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturing origin\u003c\/th\u003e\n\u003ctd\u003eCzech Republic \/ Delaware (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n\u003cli\u003ePrint profiles supported for all Prusa FDM 3D printers\u003c\/li\u003e\n\u003cli\u003eNFC tag reading via the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm \/ Anthracite Grey","offer_id":57387823563096,"sku":"IDF__18754_IDS__3443","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Pristine White","offer_id":57387823595864,"sku":"IDF__17752_IDS__3428","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Prusa Orange","offer_id":57387823628632,"sku":"IDF__17708_IDS__3416","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Jet Black","offer_id":57387823661400,"sku":"IDF__17704_IDS__3414","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Lipstick Red","offer_id":57387823726936,"sku":"IDF__17703_IDS__3404","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Azure Blue","offer_id":57387823759704,"sku":"IDF__17627_IDS__3405","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Gravity Grey","offer_id":57387823956312,"sku":"IDF__17736_IDS__3422","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Purple","offer_id":57454177354072,"sku":"IDF__17635_IDS__3413","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Black","offer_id":57454177386840,"sku":"IDF__17702_IDS__3402","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Opal Green","offer_id":57454177419608,"sku":"IDF__17711_IDS__3415","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Silver","offer_id":57454177452376,"sku":"IDF__17631_IDS__3403","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Galaxy Green","offer_id":57454177485144,"sku":"IDF__17676_IDS__3427","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ 1.75 mm \/ Marble Grey","offer_id":57454177517912,"sku":"IDF__17740_IDS__3426","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Pristine White","offer_id":57387824316760,"sku":"IDF__17770_IDS__3435","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Prusa Orange","offer_id":57387824349528,"sku":"IDF__17775_IDS__3439","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Jet Black","offer_id":57387824382296,"sku":"IDF__17750_IDS__3438","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Lipstick Red","offer_id":57387824415064,"sku":"IDF__17754_IDS__3430","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Azure Blue","offer_id":57387824447832,"sku":"IDF__17678_IDS__3434","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Army Green","offer_id":57387824480600,"sku":"IDF__17681_IDS__3431","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Gravity Grey","offer_id":57387824513368,"sku":"IDF__17748_IDS__3437","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Galaxy Purple","offer_id":57454177550680,"sku":"IDF__17682_IDS__3432","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Galaxy Black","offer_id":57454177583448,"sku":"IDF__17744_IDS__3429","price":45.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/IDF__18754_IDS__3443.jpg?v=1779971019"},{"product_id":"prusament-petg-carbon-fiber-black-nfc","title":"Prusament PETG Carbon Fibre Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG Carbon Fiber Black is a carbon-fibre-reinforced PETG filament manufactured in-house by Prusa Research in the Czech Republic. The carbon fibre fill improves dimensional stability, temperature resistance and elastic modulus compared with standard PETG, while also significantly reducing stringing.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.02 mm on diameter, monitored at the exit of the extrusion line. The incorporated carbon fibres originate from the recycling of industrial waste and end-of-life carbon composites.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG-CF extrudes at 265 °C on a heated build plate at 90 °C, with a textured or satin sheet recommended for adhesion. As the material is abrasive, a hardened nozzle is required to avoid premature wear of the extrusion tip.\u003cbr\u003e\u003cbr\u003ePrinting is virtually odourless and interlayer adhesion remains strong. The surface finish is matt black. Detail resolution is lower than PLA, and raw mechanical strength is slightly lower than unfilled PETG — the usual trade-off for a carbon-filled composite.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and packaging\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSince October 2025, Prusament spools incorporate a rewritable NFC tag compliant with the OpenPrintTag standard, designed to operate offline across different printer ecosystems. Material data is stored directly on the tag and readable via the Prusa mobile app. The redesigned, more compact spool features a locking mechanism that facilitates use in multi-material systems and filament drying.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-reinforced PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e265 °C (±10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e90 °C (±10 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eTextured or satin sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003eHardened nozzle required (abrasive material)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eMatt black\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFibre origin\u003c\/th\u003e\n\u003ctd\u003eRecycling of industrial waste and end-of-life carbon composites\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable NFC tag (OpenPrintTag standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003ePrusa Research, Czech Republic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened nozzle\u003c\/li\u003e\n  \u003cli\u003eOptimised for Prusa Research printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-material and multicolour printing systems\u003c\/li\u003e\n  \u003cli\u003eNFC tag compatible with the OpenPrintTag standard (multi-brand reading)\u003c\/li\u003e\n  \u003cli\u003eTag reading via the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ 1.75 mm","offer_id":57284898488664,"sku":"IDF__17601_IDS__3504","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusapetgcarbon.jpg?v=1778684059"},{"product_id":"prusament-petg-nfc","title":"Prusament PETG (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PETG is a professional filament manufactured in-house by Prusa Research in the Czech Republic, available in several opaque and transparent colours. Each spool meets a controlled dimensional tolerance of ±0.02 mm throughout production, guaranteeing consistent extrusion on 1.75 mm FDM printers.\u003cbr\u003e\u003cbr\u003ePETG (polyethylene terephthalate glycol) combines the mechanical strength and durability of a technical polyester with processing characteristics close to PLA: low shrinkage, low thermal deformation, and good interlayer adhesion. More flexible and less brittle than PLA, it offers a slight flex that is useful for parts subject to stress or moderate impact.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 250 ±10 °C on a heated build plate at 80 ±10 °C, without the need for an enclosed chamber. Its very low shrinkage allows the printing of large parts without risk of detachment or warping. The high interlayer adhesion makes it suited to functional parts subject to mechanical stress, technical supports, and applications requiring indoor or outdoor sealing.\u003cbr\u003e\u003cbr\u003ePETG exhibits a tendency to string: pre-drying the filament and appropriate retraction settings help limit this phenomenon. The reproduction of fine details remains inferior to PLA and long bridges are less well controlled. Conversely, the material sands more easily than PLA during post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eNFC identification and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eSpools are fitted with a fully rewritable OpenPrintTag NFC tag, storing material data offline and usable by compatible printers or via the Prusa mobile app. A QR code on the spool gives access to production parameters for each batch (measured tolerance, batch number, manufacturing date) on prusament.com, for complete traceability in series production.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG (polyethylene terephthalate glycol)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.02 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e80 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eTextured or satin steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple shades, opaque and transparent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003eIn-house Prusa Research production (Czech Republic)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Prusa Research range: MK3S+, MK4, MK4S, MINI+, XL, CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with multicolour and multi-material printing systems accepting the redesigned Prusament spool\u003c\/li\u003e\n  \u003cli\u003eNFC reading compatible with printers supporting the OpenPrintTag standard and the Prusa mobile app\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"1 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530342232,"sku":"IDF__17633_IDS__3450","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549478744,"sku":"IDF__17632_IDS__3448","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616358232,"sku":"IDF__17558_IDS__3449","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Signal White \/ 1.75 mm","offer_id":57296716497240,"sku":"IDF__17640_IDS_3458","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Lipstick Red \/ 1.75 mm","offer_id":57296793600344,"sku":"IDF__17581_IDS__3467","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Matte Black \/ 1.75 mm","offer_id":57296819814744,"sku":"IDF__17598_IDS__3469","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Mango Yellow \/ 1.75 mm","offer_id":57297417601368,"sku":"IDF__17570_IDS__3463","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57544658452824,"sku":"IDF__17638_IDS__3455","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Clear \/ 1.75 mm","offer_id":57544839201112,"sku":"IDF__17563_IDS__3456","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange Transparent \/ 1.75 mm","offer_id":57544839299416,"sku":"IDF__17664_IDS__3468","price":27.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Urban Grey \/ 1.75 mm","offer_id":57296530375000,"sku":"IDF__17687_IDS__3472","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Prusa Orange \/ 1.75 mm","offer_id":57296549511512,"sku":"IDF__17677_IDS_3470","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57296616391000,"sku":"IDF__17600_IDS__3471","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Anthracite Grey \/ 1.75 mm","offer_id":57299100598616,"sku":"IDF__17611_IDS__3475","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Signal White \/ 1.75 mm","offer_id":57296716530008,"sku":"IDF__17685_IDS_3473","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57544658583896,"sku":"IDF__25082_IDS__3945","price":45.83,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Clear \/ 1.75 mm","offer_id":57544839332184,"sku":"IDF__17591_IDS__3474","price":45.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_petg_urban_grey_1kg.jpg?v=1778828573"},{"product_id":"extrudr-greentec-pro","title":"extrudr GreenTEC Pro","description":"\u003cp style=\"text-align: justify;\"\u003eGreenTEC PRO from Extrudr is a biopolymer filament from the Austrian manufacturer's BIO-Performance range, formulated for demanding technical applications. It combines good mechanical strength, low cooling shrinkage and a matt surface finish suited to the production of functional and aesthetic FDM parts.\u003cbr\u003e\u003cbr\u003eThe material is odourless during extrusion, compliant for food contact applications under FDA standards, and biodegradable to DIN EN ISO 14855. The filament is available in several colours to cover both prototyping and series production requirements.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eGreenTEC PRO prints over a wide temperature range, from 190 to 250 °C, at speeds of up to 120 mm\/s. A heated build plate is not mandatory but can be set up to 90 °C to improve first-layer adhesion. Cooling shrinkage remains low, which limits warping on large parts.\u003cbr\u003e\u003cbr\u003eInterlayer adhesion is high: in bending, failure propagates transversely across layers rather than by delamination. Processing is accessible to operators with basic FDM knowledge and proves simpler than technical polymers such as PC, ABS or PEEK.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe material offers medium hardness combined with slight flexibility, giving it an impact resistance suited to functional parts under moderate loading. Its heat deflection resistance of up to 160 °C extends the application range beyond standard biopolymers. The matt surface minimises layer-line visibility and reduces post-processing operations on parts intended for end use.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTechnical biopolymer (BIO-Performance range)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e800 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e190–250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e0–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e40–120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat deflection resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 160 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFood contact\u003c\/th\u003e\n\u003ctd\u003eFDA compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiodegradability\u003c\/th\u003e\n\u003ctd\u003eCompliant with DIN EN ISO 14855\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a nozzle capable of reaching 250 °C\u003c\/li\u003e\n  \u003cli\u003ePrinters with or without a heated build plate (0 to 90 °C range)\u003c\/li\u003e\n  \u003cli\u003eSuited to both open-frame and enclosed configurations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ Nature \/ 1.75 mm","offer_id":57299799310680,"sku":"extgrp01","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Noir \/ 1.75 mm","offer_id":57299799343448,"sku":"extgrp02","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Blanc \/ 1.75 mm","offer_id":57299799376216,"sku":"extgrp03","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Anthracite \/ 1.75 mm","offer_id":57299799408984,"sku":"extgrp04","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Argent \/ 1.75 mm","offer_id":57299799441752,"sku":"extgrp05","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Bleu \/ 1.75 mm","offer_id":57299799474520,"sku":"extgrp06","price":37.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Rouge \/ 1.75 mm","offer_id":57299799507288,"sku":"extgrp07","price":37.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extrudr_800g_nature.png?v=1778849706"},{"product_id":"extrudr-greentec-pro-carbon","title":"extrudr GreenTEC Pro Carbon","description":"\u003cp style=\"text-align: justify;\"\u003eGreenTEC Pro Carbon from Extrudr is a composite filament combining the GreenTEC Pro biopolymer matrix with carbon fibre reinforcement. The matrix is derived from renewable raw materials and is biodegradable, while the fibre fill adds rigidity and dimensional stability for low specific weight.\u003cbr\u003e\u003cbr\u003eThe formulation targets technical applications inspired by motorsport, aeronautics, aerospace and medical: lightweight structural parts, jigs, instrument supports and functional prototypes. The material complies with REACH and RoHS regulations.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrinting is carried out in the 200–240 °C range, with a recommended temperature between 230 and 240 °C to preserve interlayer adhesion. Below 230 °C, interlayer cohesion degrades noticeably. The manufacturer recommends printing a heat tower at the start of each batch to dial in the optimal settings for each machine.\u003cbr\u003e\u003cbr\u003eThe carbon fibre fill is abrasive and requires the use of a hardened nozzle of at least 0.5 mm. The fibre also stabilises the molten material during bridging phases and limits shrinkage, making processing accessible to operators with limited composite experience.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe fibre reinforcement gives the material high rigidity and good compressive load resistance, complemented by notable impact strength. Heat deflection resistance reaches 165 °C (Vicat VST), with UV stability comparable to ASA, opening use to functional parts exposed outdoors or in hot environments. The resulting surface is matt, with fibre orientation reducing layer-line visibility and masking layer irregularities, which reduces post-processing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-reinforced biopolymer (carbon\/glass composite)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e800 g spool (0.8 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint temperature range\u003c\/th\u003e\n\u003ctd\u003e200–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended temperature\u003c\/th\u003e\n\u003ctd\u003e230–240 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat resistance (Vicat VST)\u003c\/th\u003e\n\u003ctd\u003e165 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUV stability\u003c\/th\u003e\n\u003ctd\u003eComparable to ASA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended nozzle\u003c\/th\u003e\n\u003ctd\u003eHardened nozzle, minimum 0.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRaw material origin\u003c\/th\u003e\n\u003ctd\u003eRenewable raw materials, biodegradable matrix\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH and RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-frame or enclosed FDM printers\u003c\/li\u003e\n\u003cli\u003eMachines accepting a nozzle temperature up to 240 °C\u003c\/li\u003e\n\u003cli\u003eDirect drive or Bowden extruder configuration\u003c\/li\u003e\n\u003cli\u003eHardened nozzle (hardened steel, ruby, carbide) with a minimum diameter of 0.5 mm required to handle the abrasive nature of the carbon fill\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57300000145752,"sku":"extgrpca","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extrudr_800g_carbon.png?v=1778853270"},{"product_id":"extrudr-petg","title":"extrudr PETG","description":"\u003cp style=\"text-align: justify;\"\u003ePETG from Extrudr is a technical filament formulated specifically for FDM\/FFF processes, targeting functional applications subject to significant mechanical stress. Its formulation combines high chemical resistance, limited cooling shrinkage, and FDA compliance, covering both electronic component manufacturing and food-contact parts.\u003cbr\u003e\u003cbr\u003eThe material is 100 % recyclable, and several colours are available to incorporate aesthetic requirements into prototyping and short-run projects. The visual surface offers the translucent finish characteristic of well-extruded PETG.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints between 190 and 230 °C, with a build plate up to 90 °C, at speeds of 60 to 120 mm\/s. Interlayer adhesion is high when the print temperature is sufficient and part cooling is controlled. The material is aimed at operators with a basic knowledge of FDM.\u003cbr\u003e\u003cbr\u003eFor large parts (beyond approximately 10 × 10 × 10 cm), a heated build plate and an enclosed chamber are recommended to limit lifting and ensure dimensional stability throughout the print session.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG combines good rigidity with slight flexibility, giving it high impact resistance and a progressive failure behaviour. Its heat deflection resistance of 80–90 °C allows use in the production of electronic components, technical utensils and fitout parts. The broad chemical resistance and FDA food-contact compliance extend the range to food and laboratory applications.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1000 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e190–230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e0–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e60–120 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat deflection resistance\u003c\/th\u003e\n\u003ctd\u003e80–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFood contact\u003c\/th\u003e\n\u003ctd\u003eFDA compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecyclability\u003c\/th\u003e\n\u003ctd\u003e100 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (0 to 90 °C range)\u003c\/li\u003e\n  \u003cli\u003eOpen configurations for small parts; enclosed chamber recommended for parts larger than 10 × 10 × 10 cm\u003c\/li\u003e\n  \u003cli\u003eStandard brass, steel or hardened steel nozzle suitable for PETG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"1 kg \/ Noir \/ 1.75 mm","offer_id":57300667335000,"sku":"extpet01","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Blanc \/ 1.75 mm","offer_id":57300667367768,"sku":"extpet02","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris \/ 1.75 mm","offer_id":57300667400536,"sku":"extpet03","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Clear \/ 1.75 mm","offer_id":57300667433304,"sku":"extpet04","price":32.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extrudr-PETG-1_75mm-1100g-Extrudr-1617384932_8f853972-a560-4c2a-9086-a0e9dd723fea.jpg?v=1778856672"},{"product_id":"extrudr-nx2-pla","title":"extrudr NX2 PLA – Matt Finish","description":"\u003cp style=\"text-align: justify;\"\u003ePLA NX2 MATT from Extrudr is a biopolymer filament developed to combine the ease of processing of standard PLA with enhanced mechanical properties. The MATT formulation delivers a matt surface finish that reduces layer-line visibility and limits post-processing operations on parts intended for end use. The filament is available in several colours to cover prototyping, short runs and presentation parts.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA NX2 MATT prints in the 200–230 °C range, with a build plate set between 20 and 60 °C. The wide speed range, from 20 to 200 mm\/s, makes it compatible with both high-speed production machines and detail-oriented printers.\u003cbr\u003e\u003cbr\u003eCooling shrinkage remains limited and build plate adhesion does not require an enclosed chamber for the majority of geometries, simplifying integration across heterogeneous machine fleets.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and compliance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe material combines tensile strength, toughness and impact resistance, extending the application range of standard PLA to functional parts subject to moderate loads. FDA, RoHS and toy safety standard compliance opens use to regulated sectors such as food, non-sterile medical environments and children's products. The biopolymer matrix, CO₂-neutral and biodegradable, integrates well into eco-design approaches.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA NX2 MATT (biopolymer)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm or 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg, 2.5 kg, 5 kg or 10 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e200–230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e20–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e20–200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCarbon footprint\u003c\/th\u003e\n\u003ctd\u003eCO₂-neutral\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiodegradability\u003c\/th\u003e\n\u003ctd\u003eBiodegradable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eFDA, RoHS, toy safety standards\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 2.85 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines with or without a heated build plate (20–60 °C range)\u003c\/li\u003e\n  \u003cli\u003eOpen-frame and enclosed configurations\u003c\/li\u003e\n  \u003cli\u003eStandard brass or steel nozzle, no abrasivity constraint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"1 kg \/ Anthracite \/ 1.75 mm","offer_id":57300882686296,"sku":"extnx204","price":21.66,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris \/ 1.75 mm","offer_id":57314029240664,"sku":"extnx203","price":21.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/extnx04.png?v=1778859752"},{"product_id":"extrudr-xpetg-cf","title":"extrudr XPETG CF","description":"\u003cp style=\"text-align: justify;\"\u003eXPETG CF from Extrudr is a composite filament combining a modified PETG matrix with carbon fibre reinforcement. This combination delivers high rigidity and mechanical strength superior to standard PETG, while retaining accessible print behaviour and low cooling shrinkage. The range is available in several colours.\u003cbr\u003e\u003cbr\u003eThe material offers broad chemical resistance and a UL 94 flame-retardant rating at 3.2 mm wall thickness. The raw material is certified to REACH and RoHS standards, making it a proven option for producing functional parts in regulated sectors.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrinting is carried out between 220 and 250 °C, on a heated build plate at 60–90 °C, at speeds of 20 to 200 mm\/s. The manufacturer recommends printing a heat tower to dial in the optimal settings for each machine.\u003cbr\u003e\u003cbr\u003eThe carbon fibre fill is abrasive and requires the use of a hardened nozzle. Despite the high fibre content, interlayer adhesion remains good and the material shows neither significant warping nor notable shrinkage, simplifying the production of large parts.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eXPETG CF combines high mechanical strength, good elongation at break and heat resistance of 85 °C. These characteristics cover a wide spectrum of applications, from electronic component manufacturing and workshop jigs to technical utensils and lightweight structural parts. The fibre reinforcement gives a matt surface finish that reduces layer-line visibility and limits post-processing operations.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eModified carbon-fibre-reinforced PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm or 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e0.8 kg, 2.5 kg or 5 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e220–250 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e20–200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlame-retardant rating\u003c\/th\u003e\n\u003ctd\u003eUL 94 (3.2 mm wall thickness)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eREACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 2.85 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (60 to 90 °C range)\u003c\/li\u003e\n  \u003cli\u003eHardened nozzle (hardened steel, ruby, carbide) required to handle the abrasive nature of the carbon fill\u003c\/li\u003e\n  \u003cli\u003eDirect drive or Bowden extruder, open-frame or enclosed configuration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57314164179288,"sku":"extXPET1","price":41.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Extrudr-XPETG.webp?v=1779088195"},{"product_id":"extrudr-xpetg-rec","title":"extrudr XPETG REC","description":"\u003cp style=\"text-align: justify;\"\u003eXPETG REC from Extrudr is a technical PETG filament formulated from recycled raw materials. The recovered materials are reprocessed and internally modified to ensure a quality level comparable to that of virgin PETG. The process, with low raw material and energy consumption, reduces the carbon footprint compared with conventional production.\u003cbr\u003e\u003cbr\u003eThe filament retains the characteristic properties of modified PETG: high chemical resistance, 100 % recyclability and good processability. It is available in several colours to cover prototyping and short-run eco-design requirements.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eXPETG REC prints between 230 and 260 °C, on a heated build plate at 60–100 °C, at speeds of 20 to 200 mm\/s. The manufacturer rates the processing difficulty as medium: the material is aimed at operators with a basic knowledge of FDM. Interlayer adhesion is high at the correct temperature, and impact resistance is rated 7\/10, qualifying the filament for functional parts subject to moderate mechanical loading.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe material offers heat resistance of 85–95 °C, extending the application range beyond standard PETG to electronic components, workshop jigs and technical utensils. The broad chemical resistance covers laboratory environments. Elongation at break (5\/10) and maximum load (7\/10) position the material for functional rather than highly deformable parts. Visual quality is rated 8\/10.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eModified recycled PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1000 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e230–260 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60–100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e20–200 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003e85–95 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecyclability\u003c\/th\u003e\n\u003ctd\u003e100 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty level\u003c\/th\u003e\n\u003ctd\u003eMedium\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e5\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eImpact resistance\u003c\/th\u003e\n\u003ctd\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLayer adhesion\u003c\/th\u003e\n\u003ctd\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum load\u003c\/th\u003e\n\u003ctd\u003e7\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVisual quality\u003c\/th\u003e\n\u003ctd\u003e8\/10\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRaw material origin\u003c\/th\u003e\n\u003ctd\u003eRecycled raw materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (60 to 100 °C range)\u003c\/li\u003e\n  \u003cli\u003eNozzle capable of reaching 260 °C\u003c\/li\u003e\n  \u003cli\u003eOpen-frame or enclosed configurations, enclosed recommended for large parts\u003c\/li\u003e\n  \u003cli\u003eStandard brass, steel or hardened steel nozzle suitable for PETG\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"1 kg \/ Blanc \/ 1.75 mm","offer_id":57314234401112,"sku":"9010241380015","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Transparent \/ 1.75 mm","offer_id":57314234433880,"sku":"9010241380008","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/202010_RePETG_white.jpg?v=1779089226"},{"product_id":"extrudr-pctg","title":"extrudr PCTG","description":"\u003cp style=\"text-align: justify;\"\u003ePCTG from Extrudr is a modified copolyester filament designed for industrial applications. Its formulation combines high chemical and thermal resistance with marked flexibility and impact resistance, all combined with a glassy surface finish. The material also offers flame-retardant properties to UL94 V2 and HB ratings.\u003cbr\u003e\u003cbr\u003eThe raw materials are certified for cosmetics contact, and comply with FDA, REACH and RoHS, opening use to regulated sectors. The filament is available in several colours to cover both prototyping and the production of functional parts with a refined aesthetic.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCTG prints between 250 and 270 °C, on a heated build plate at 50–70 °C. The material is rated as easy to process, making it accessible to operators with basic FDM knowledge. With sufficient nozzle heat and limited part cooling, interlayer adhesion is high, ensuring good mechanical performance on the Z-axis of functional parts.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCTG combines good rigidity with some flexibility and high impact resistance, distinguishing it from standard PETG on parts subject to dynamic loading. Its heat resistance of 80–90 °C allows use in electronic components, technical utensils and interior fitout parts. Scratch resistance and the glassy finish suit presentation elements, transparent covers and optical guards in industrial environments.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePCTG (modified copolyester)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e800 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e250–270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003e80–90 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eGlassy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eScratch resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlame-retardant properties\u003c\/th\u003e\n\u003ctd\u003eUL94 V2 and HB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompliance\u003c\/th\u003e\n\u003ctd\u003eCosmetics, FDA, REACH, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSystem compatibility\u003c\/th\u003e\n\u003ctd\u003eBambu Lab AMS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (50 to 70 °C range)\u003c\/li\u003e\n  \u003cli\u003eNozzle capable of reaching 270 °C\u003c\/li\u003e\n  \u003cli\u003eCompatible with Bambu Lab AMS\u003c\/li\u003e\n  \u003cli\u003eOpen-frame or enclosed configurations, direct drive or Bowden extruder\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"extrudr","offers":[{"title":"0.8 kg \/ Hellfire","offer_id":57314380218712,"sku":"9010241526260","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Transparent","offer_id":57474351890776,"sku":"9010241526000","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Rouge","offer_id":57474351923544,"sku":"9010241526154","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Bleu","offer_id":57474351956312,"sku":"9010241526147","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Anthracite","offer_id":57474351989080,"sku":"9010241526062","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Blanc","offer_id":57474352021848,"sku":"9010241526017","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Argent","offer_id":57474352054616,"sku":"9010241526086","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Noir","offer_id":57474352087384,"sku":"9010241526024","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"0.8 kg \/ Métalliques","offer_id":57474352120152,"sku":"9010241526055","price":24.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/9010241526000_PCTG__transparent_1.avif?v=1780929970"},{"product_id":"basf-ultrafuse-pet","title":"BASF Ultrafuse PET","description":"\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUltrafuse PET has a wide print window (temperature depends on speed), making it usable on most FDM printers. It delivers good interlayer adhesion, high resolution and simple handling, without the need for an enclosed chamber.\u003cbr\u003e\u003cbr\u003eIt prints at a nozzle temperature of 210–230 °C on a heated glass build plate at 60–80 °C, at speeds of 40 to 150 mm\/s, with a minimum nozzle diameter of 0.4 mm.\u003c\/p\u003e\n\u003ch2\u003eApplications and compliance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUltrafuse PET is based on a granulate compliant with the European regulation on plastic materials intended for food contact, and has been evaluated for food-contact 3D printing under LFGB and Regulation (EC) No 1935\/2004 (compliance to be validated for the intended final application). The material is 100 % recyclable, watertight, and offers good colour stability and controlled surface quality. BASF technical data sheet (TDS) and safety data sheet (MSDS) available from the distributor.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePET (polyethylene terephthalate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable diameters in the range\u003c\/th\u003e\n\u003ctd\u003eMultiple diameters available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging options\u003c\/th\u003e\n\u003ctd\u003eMultiple packaging options available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e210–230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60–80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate material\u003c\/th\u003e\n\u003ctd\u003eGlass\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e≥ 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e40–150 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003e100 % recyclable, watertight, good interlayer adhesion, high resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFood-contact compliance\u003c\/th\u003e\n\u003ctd\u003eGranulate compliant for food contact (LFGB, EC Regulation 1935\/2004), to be validated per use case\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003eTooling, jigs and fixtures, functional prototypes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet (TDS), safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBASF Forward AM – Ultrafuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM printers compatible with the chosen filament diameter\u003c\/li\u003e\n  \u003cli\u003eWide print window: compatible with most desktop and professional 3D printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with Prusa, Bambu Lab, Raise3D, Ultimaker, Volumic, Creality, etc.\u003c\/li\u003e\n  \u003cli\u003eApplications: workshop tooling, jigs and fixtures, functional prototypes, watertight parts, food-contact applications (to be validated per use case)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57314493202776,"sku":"BA1026","price":24.96,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Transparent","offer_id":57384945746264,"sku":"BA1037","price":24.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Ultrafuse_PETCF15Black_1.75mm_750g_600x_crop_center_d6f90fef-889b-49b9-b03c-6c1d622aeae5.webp?v=1779092523"},{"product_id":"basf-ultrafuse-pla","title":"BASF Ultrafuse PLA","description":"\u003cp style=\"text-align: justify;\"\u003eUltrafuse PLA is a polylactic acid (PLA) filament developed by BASF Forward AM, the additive manufacturing division of the BASF group. Its formulation is optimised to deliver smooth extrusion, proven interlayer cohesion and controlled dimensional stability — properties directly applicable to the production of visual prototypes, presentation parts, models and decorative applications where surface regularity is expected.\u003cbr\u003e\u003cbr\u003eSeveral colours (white, pearl white, grey, black, red, blue, light blue, green, pink, gold, bronze, silver) and several packaging formats are available in the Ultrafuse PLA range, covering both occasional workshop needs and short-run production requirements.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints on a 1.75 mm FDM printer without the need for an enclosed chamber. PLA exhibits virtually no shrinkage and good interlayer adhesion, making it an accessible consumable even for operators without specialist knowledge of technical materials. Like all PLA, it is not recommended for parts exposed to above 55 °C or subject to significant mechanical stress: in those cases, opt for a PETG, ABS or filled PA from the range.\u003c\/p\u003e\n\u003ch2\u003eStorage and documents\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with desiccant after opening, to preserve extrusion properties. BASF Ultrafuse PLA technical data sheet (TDS) and safety data sheet (MSDS) available from the distributor, for integration into HSE procedures and workshop documentation.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA (polylactic acid)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 \/ 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging options\u003c\/th\u003e\n\u003ctd\u003eMultiple packaging options available in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eMultiple colours available in the range (white, grey, black, red, blue, green, pink, gold, bronze, silver, pearl white, light blue)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTechnology\u003c\/th\u003e\n\u003ctd\u003eFDM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eSmooth extrusion, proven interlayer cohesion, controlled dimensional stability, high surface quality\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003ePrototyping, presentation parts, models, decorative objects, educational applications\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eUltrafuse PLA technical data sheet (TDS), safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBASF Forward AM – Ultrafuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with a wide range of desktop and professional 3D printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with Prusa MK3S, MK4, MK3.9, XL, CORE One, MINI\u003c\/li\u003e\n  \u003cli\u003eCompatible with Bambu Lab X1, P1S, P1P, A1, A1 mini\u003c\/li\u003e\n  \u003cli\u003eCompatible with Volumic Stream, SH, EXO, Creality, Anycubic, Raise3D, Ultimaker, etc.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57314528690520,"sku":"PLA-0002a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Bleu","offer_id":57372729999704,"sku":"PLA-0005a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Vert","offer_id":57372730065240,"sku":"PLA-0007a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Gris","offer_id":57372730098008,"sku":"PLA-0023a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Orange","offer_id":57372730130776,"sku":"PLA-0009a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Rouge","offer_id":57372730163544,"sku":"PLA-0004a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Blanc","offer_id":57372730196312,"sku":"PLA-0003a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Jaune","offer_id":57314535473496,"sku":"PLA-0006a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Nature","offer_id":57384916844888,"sku":"PLA-0001a075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Noir","offer_id":57314528723288,"sku":"PLA-0002b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Bleu","offer_id":57372730032472,"sku":"PLA-0005b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Blanc","offer_id":57372730229080,"sku":"PLA-0003b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 2.85 mm \/ Jaune","offer_id":57314535506264,"sku":"PLA-0006b075","price":17.9,"currency_code":"EUR","in_stock":true},{"title":"5.5 lb \/ 1.75 mm \/ Noir","offer_id":57384916877656,"sku":"PLA-0002a250","price":29.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-pla-0002a075-matriel-dimpression-3d-acide-polylactique-pla-noir-750-g.jpg?v=1779092949"},{"product_id":"pla-ultra-volumnic","title":"PLA Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eVolumic PLA Ultra is an industrial-grade PLA filament formulated for professional applications requiring both ease of processing and extended mechanical performance. Its formulation combines flexibility comparable to ABS with excellent interlayer adhesion and a refined surface finish, broadening its application range to functional parts subject to moderate stress.\u003cbr\u003e\u003cbr\u003eThe material has a distinctive technical property: its annealing capability allows a glass transition temperature of 144 °C to be reached after post-print heat treatment, where standard PLA is limited to around 55–60 °C. The filament is available in several colours and spool weights to cover prototyping, short runs and presentation parts.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA Ultra prints at 210 °C at the nozzle, on a heated build plate at 50 °C. The manufacturer rates processing as very easy and build plate adhesion as strong, which simplifies session start-up and limits large-part lifting. The filament accepts all standard nozzle types without abrasivity constraints and does not require an enclosed chamber for the majority of geometries.\u003c\/p\u003e\n\u003ch2\u003ePost-processing and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eOven annealing transforms the material's crystalline structure, raising the Tg from the standard PLA value to 144 °C, enabling use in hot environments where standard PLA would creep. This characteristic opens use to functional parts exposed under engine covers, in hot technical rooms or in contact with moderate heat sources. Pre-annealing flexibility retains a progressive failure behaviour, distinct from brittle standard PLA, qualifying the material for mechanical prototypes, workshop jigs and end-use parts.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA (polylactic acid), industrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eMultiple spool weights available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTg after annealing\u003c\/th\u003e\n\u003ctd\u003e144 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll types\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint difficulty\u003c\/th\u003e\n\u003ctd\u003eVery easy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream Series printers\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (50 °C setting)\u003c\/li\u003e\n  \u003cli\u003eLacquered build plate recommended\u003c\/li\u003e\n  \u003cli\u003eAll nozzle types (brass, steel, hardened steel) without abrasivity constraint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Jaune","offer_id":57314667692376,"sku":"PLAV656","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge","offer_id":57314667725144,"sku":"PLAV655","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu","offer_id":57314667757912,"sku":"PLAV654","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange","offer_id":57314667790680,"sku":"PLAV653","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris aluminium","offer_id":57314667823448,"sku":"PLAV652","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Nature","offer_id":57314667856216,"sku":"PLAV651","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Vert anis","offer_id":57314667888984,"sku":"PLAV1013","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Noir","offer_id":57314751316312,"sku":"PLAV560","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Noir","offer_id":57314751578456,"sku":"PLAV1102","price":69.2,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Blanc","offer_id":57314765701464,"sku":"PLAV1037","price":69.2,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Gris","offer_id":57314882290008,"sku":"PLAV1794","price":69.5,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Bleu","offer_id":57314751676760,"sku":"PLAV1229","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Noir","offer_id":57314751840600,"sku":"PLAV1103","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Blanc","offer_id":57314765734232,"sku":"PLAV4894","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"4.5 kg \/ Gris","offer_id":57314882322776,"sku":"PLAV5368","price":104.8,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Blanc","offer_id":57316392698200,"sku":"PLAV650","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/pla-ultra-1kg-jaune-3.jpg?v=1779094557"},{"product_id":"petg-ultra-translucide-volumnic","title":"PETG Ultra Translucent – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eVolumic PETG Ultra is an industrial-grade PETG\/PCTG filament formulated for professional applications requiring both good mechanical strength and a refined surface finish. The raw material is selected to limit stringing during printing, which reduces post-processing operations on functional and presentation parts.\u003cbr\u003e\u003cbr\u003eThe filament prints at a lower temperature range than the average technical PETG, simplifying integration across heterogeneous machine fleets. It is available in several colours and spool weights to cover prototyping, short runs and functional part production.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG Ultra prints at 230 °C at the nozzle, on a heated build plate at 60 °C. The manufacturer rates processing as easy and build plate adhesion as normal, making it accessible to operators with basic FDM knowledge. The very low stringing directly improves the visual quality of parts, particularly on multi-traverse geometries. The filament accepts all standard nozzle types without abrasivity constraints and does not require an enclosed chamber for the majority of geometries.\u003c\/p\u003e\n\u003ch2\u003eMechanical properties and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe PETG\/PCTG formulation combines the mechanical strength characteristic of PETG with some flexibility and high impact resistance, qualifying the material for functional parts subject to moderate dynamic loading: electronic components, workshop jigs, technical utensils and protective covers. The surface finish, rated as excellent by the manufacturer, allows direct end use or presentation without post-processing.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\/PCTG, industrial grade\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eMultiple spool weights available\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eNormal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll types\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint difficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStringing\u003c\/th\u003e\n\u003ctd\u003eVery low\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream Series printers\u003c\/li\u003e\n  \u003cli\u003eMachines equipped with a heated build plate (60 °C setting)\u003c\/li\u003e\n  \u003cli\u003eLacquered build plate recommended\u003c\/li\u003e\n  \u003cli\u003eAll nozzle types (brass, steel, hardened steel) without abrasivity constraint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Naturel (translucide)","offer_id":57317167792472,"sku":"PETV569","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu translucide","offer_id":57317167694168,"sku":"PETV649","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge translucide","offer_id":57317167726936,"sku":"PETV648","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange translucide","offer_id":57317167759704,"sku":"PETV647","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Naturel (translucide)","offer_id":57317253284184,"sku":"PETV5907","price":69.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/petg-ultra-1kg-bleu-translucide-3.jpg?v=1779110450"},{"product_id":"petg-ultra-volumic","title":"PETG Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003ePETG Ultra is an industrial-grade filament developed by Volumic, formulated from PETG with a PCTG addition to combine mechanical performance and surface finish quality. Available in several colours, it is aimed at prototyping workshops and design offices looking for a versatile, easy-to-process consumable.\u003cbr\u003e\u003cbr\u003eThe formulation is optimised to limit stringing during extrusion, which reduces post-processing operations on parts featuring rapid travel moves or complex geometries.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at 230 °C at the nozzle, on a heated build plate at 60 °C. This contained extrusion temperature for a PETG limits thermal stress on the machine's hot-end components and allows processing without an enclosed chamber.\u003cbr\u003e\u003cbr\u003eAdhesion on a lacquered build plate is rated as normal, without the need for additional adhesive. The material is compatible with all nozzle types (brass, steel, hardened), its additive content generating no notable abrasion.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePETG Ultra is suited to functional prototyping, assembly parts and technical supports. Its surface finish also enables the production of visible parts requiring no aesthetic post-processing. The stated ease of printing makes it suitable for recurring production without advanced parameter tuning.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG \/ PCTG\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll types (brass, steel, hardened)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eNormal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eLacquered build plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint difficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e2.3 kg spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic Ultra\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReference\u003c\/th\u003e\n\u003ctd\u003ePETV6087\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Volumic Stream range\u003c\/li\u003e\n  \u003cli\u003eCompatible with all standard and high-temperature nozzles\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Noir \/ 1.75 mm","offer_id":57317479514456,"sku":"PETV645","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Blanc \/ 1.75 mm","offer_id":57317567398232,"sku":"PETV1134","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu \/ 1.75 mm","offer_id":57317567431000,"sku":"PETV1133","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Orange \/ 1.75 mm","offer_id":57317567463768,"sku":"PETV1136","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge \/ 1.75 mm","offer_id":57317567496536,"sku":"PETV1132","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Noir \/ 1.75 mm","offer_id":57317567529304,"sku":"PETV4439","price":75.0,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Blanc \/ 1.75 mm","offer_id":57317567562072,"sku":"PETV5898","price":75.0,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ Orange \/ 1.75 mm","offer_id":57317567594840,"sku":"PETV6087","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/petg-ultra-1kg-noir-opaque-3.jpg?v=1779115511"},{"product_id":"prusament-pla-refill-nfc-compatible","title":"Prusament PLA Refill (NFC Compatible)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PLA Refill 900g is a premium filament manufactured in-house by Prusa Research, packaged in a refill format without flanges or core. The format is designed to be installed on a previously emptied Prusament spool and is part of the manufacturer's eco-design approach by reducing the amount of packaging material per kilogram of filament delivered.\u003cbr\u003e\u003cbr\u003eThe entire manufacturing process is controlled in-house, with a controlled dimensional tolerance of ±0.02 mm for solid colours (±0.03 mm for blends), guaranteeing consistent extrusion in production. Each refill is NFC-compatible for automatic recognition by equipped printers, and the NFC refill version is not backwards-compatible with the 1 kg cardboard-core refills of the previous generation.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePrusament PLA prints at 215 °C at the nozzle, on a heated build plate at 50–60 °C. Its low thermal expansion allows large parts to be printed without significant warping, and its low melting temperature also makes it suited to small detailed parts. The material does not require an enclosed chamber and accepts smooth PEI, textured or satin steel sheets.\u003c\/p\u003e\n\u003ch2\u003eApplications and limitations\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA remains the easiest material to print, suited to rapid prototyping, concept models, detailed figurines and presentation parts. It has low heat resistance and brittle failure behaviour, which limits its use in functional parts exposed to high temperatures or subject to significant mechanical stress. For these applications, opt for a PETG, ABS or technical material. Each spool is traceable via a QR code giving access to production parameters online at prusament.com. The range is available in several colours.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003ePrusament (Prusa Research)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.02 mm (±0.03 mm for blends)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g refill, without flanges or core, NFC-compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e215 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e50–60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSheet compatibility\u003c\/th\u003e\n\u003ctd\u003eSmooth PEI, textured or satin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code per spool, parameters available at prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM\/FFF printers accepting 1.75 mm diameter filament\u003c\/li\u003e\n  \u003cli\u003eOptimised for the Original Prusa range (MK3S, MK4, MK4S, XL, CORE One)\u003c\/li\u003e\n  \u003cli\u003ePrinters equipped with an NFC reader for automatic filament recognition\u003c\/li\u003e\n  \u003cli\u003eInstallation on a previously emptied Prusament NFC spool\u003c\/li\u003e\n  \u003cli\u003eNot backwards-compatible with 1 kg cardboard-core refills of the previous generation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.9 kg \/ Azure Blue \/ 1.75 mm","offer_id":57321415639384,"sku":"IDF__17695_DS___3554","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Black \/ 1.75 mm","offer_id":57321415672152,"sku":"IDF__17743_IDS__3549","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Galaxy Silver \/ 1.75 mm","offer_id":57321415704920,"sku":"IDF__17690_IDS__3550","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Jet Black \/ 1.75 mm","offer_id":57321415737688,"sku":"IDF__17766_IDS__3551","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Vanilla White \/ 1.75 mm","offer_id":57321415770456,"sku":"IDF__17767_IDS__3552","price":19.58,"currency_code":"EUR","in_stock":true},{"title":"0.9 kg \/ Pristine White \/ 1.75 mm","offer_id":57321415803224,"sku":"IDF__17772_DS___3553","price":19.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusa_pla_azure_blue_refill_900.jpg?v=1779174487"},{"product_id":"treed-pla-fusion","title":"TreeD PLA Fusion","description":"\u003cp style=\"text-align: justify;\"\u003ePLA Fusion from TreeD Filaments is a PLA filament formulated specifically for long-duration prints. Its composition is optimised to limit nozzle clogging during extended extrusion, making it a reference suited to continuous production workshops and printers equipped with all-metal heater blocks.\u003cbr\u003e\u003cbr\u003eOdourless during printing, the filament maintains consistent diameter and colour throughout the spool, including at high throughput. It is available in several colours.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA Fusion prints in the 190–210 °C range with a heated build plate that can be set up to 70 °C, without plate heating being strictly necessary. Its formulation controls shrinkage phenomena and tolerates profiles with numerous retractions, making it suited to parts with complex geometries and long continuous print runs.\u003cbr\u003e\u003cbr\u003eThe material remains stable on all-metal extruders, which are known to be prone to clogging with standard PLA.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePLA Fusion is aimed at prototyping workshops, design offices and production operations manufacturing medium to large parts, continuous series or multi-part prints. It is suited to functional prototyping not subject to high thermal stress, study models, presentation parts and light tooling, provided the service temperature remains below the material's Vicat point.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA — Fusion formulation (long-duration prints)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e750 g spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e190–210 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003eUp to 70 °C (not mandatory)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDensity\u003c\/th\u003e\n\u003ctd\u003e1.24 g\/cm³ (ASTM D792)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMelting point\u003c\/th\u003e\n\u003ctd\u003e144 °C (ASTM D3418)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eVicat point\u003c\/th\u003e\n\u003ctd\u003e55–60 °C (ASTM D3418)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus\u003c\/th\u003e\n\u003ctd\u003e65.5 MPa (ASTM D882)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eOdour during printing\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers accepting 1.75 mm filament\u003c\/li\u003e\n  \u003cli\u003eCompatible with all-metal hotend extruders\u003c\/li\u003e\n  \u003cli\u003eCompatible with standard PLA print profiles\u003c\/li\u003e\n  \u003cli\u003eSuited to both open-frame and enclosed printers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TreeD","offers":[{"title":"0.75 kg \/ Aluminium","offer_id":57321790046552,"sku":"PLAFUSI-ALLU-750-175","price":29.7,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Blanc","offer_id":57321790079320,"sku":"PLAFUSI-9003-750-175","price":29.7,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Bleu","offer_id":57321790112088,"sku":"PLAFUSI-5002-750-175","price":29.7,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Rouge","offer_id":57321978560856,"sku":"PLAFUSI-3000-750-175","price":29.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/2023_12_pla-fusion-aluminium-treed_764cc97b-2487-48e9-aa92-65ec9c4d3ca2.png?v=1779177723"},{"product_id":"basf-ultracur3d-st-45-m-tough-resin","title":"BASF Ultracur3D ST 45 M Tough Resin","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® ST 45 M from Forward AM (BASF) is a reactive urethane photopolymer belonging to the Tough range. Its formulation is optimised to combine high mechanical strength, long-term toughness and impact resistance, making it suited to printing functional parts subject to repeated loading.\u003cbr\u003e\u003cbr\u003eThe resin is designed for short exposure times in masked stereolithography and delivers a smooth surface finish directly from the vat. Several colours are available depending on the reference.\u003c\/p\u003e\n\u003ch2\u003eProcessing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUltracur3D ST 45 M is processed on DLP and LCD (MSLA) printers. Its rheology allows high print throughput and short cycle times in series production.\u003cbr\u003e\u003cbr\u003eAfter printing, parts must be cleaned in a suitable solvent and then UV post-cured to achieve the target mechanical properties. The Shore D 80 hardness and elastic modulus of 2300 MPa position this material as an alternative to standard rigid resins when better impact resistance is required.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eUltracur3D ST 45 M is intended for functional parts requiring both dimensional accuracy and mechanical strength: technical housings, functional prototypes, highly detailed or textured parts, tooling and custom accessories. The heat deflection temperature of 73 °C allows service use above moderate ambient temperature, but falls short of the high-temp ranges dedicated to demanding thermal applications.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eReactive urethane photopolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRange\u003c\/th\u003e\n\u003ctd\u003eUltracur3D ST 45 M — Tough Line\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eTough (high-toughness resin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElastic modulus\u003c\/th\u003e\n\u003ctd\u003e2300 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003e80 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat deflection temperature (HDT)\u003c\/th\u003e\n\u003ctd\u003e73 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eDLP, LCD (MSLA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e1 kg or 5 kg container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColours\u003c\/th\u003e\n\u003ctd\u003eSeveral available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDLP resin 3D printers\u003c\/li\u003e\n\u003cli\u003eLCD \/ MSLA resin 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible with most professional DLP and LCD platforms on the market\u003c\/li\u003e\n\u003cli\u003ePost-processing: suitable solvent washing station and UV post-cure station\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"1 kg \/ Clear","offer_id":57322356277592,"sku":"300012","price":137.09,"currency_code":"EUR","in_stock":true},{"title":"5 kg \/ Clear","offer_id":57322356244824,"sku":"300153","price":546.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-st-45-M-tough-resin.jpg?v=1779182919"},{"product_id":"basf-ultracur3d-st-80-tough-resin","title":"BASF Ultracur3D ST 80 Tough Resin","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® ST 80 is a photopolymer resin developed by BASF Forward AM, positioned by the manufacturer as a versatile resin focused on cost-per-part efficiency. Its transparent formulation delivers a tensile modulus of 1500 MPa and a flexural modulus of 1700 MPa, with a Shore D hardness of 80.\u003cbr\u003e\u003cbr\u003eViscosity drops from 400 mPa·s at 30 °C to 120 mPa·s at 50 °C, facilitating handling in the vat. Liquid resin density is 1.08 g\/cm³ and cured part density reaches 1.12 g\/cm³.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eST 80 resin retains ductile behaviour with an elongation at break of 20 % and a tensile strength of 35 MPa, complemented by a flexural strength of 60 MPa. Izod impact tests give 24 J\/m on a notched specimen at 23 °C and 720 J\/m on an unnotched specimen, while notched Charpy impact comes in at 1.4 kJ\/m². Low-temperature behaviour is documented with a notched Izod of 14 J\/m at -30 °C.\u003c\/p\u003e\n\u003ch2\u003eThermal stability and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHeat deflection temperature (HDT) is 46 °C at 0.45 MPa and 42 °C at 1.82 MPa, which limits use of parts to applications without prolonged heat exposure. Water absorption over 24 hours remains limited to 0.50 %. The resin is positioned for prototyping, functional parts not subject to thermal constraints, and production runs where material cost control is a criterion. ISO 10993 biocompatibility data are available on request from the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePhotopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eTransparent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 30 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e400 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 50 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e120 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D4052-18a)\u003c\/th\u003e\n\u003ctd\u003e1.08 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.12 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e1500 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e35 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e20 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e1700 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at -30 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e14 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e24 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUnnotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e720 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Charpy at 23 °C (ISO 179-1)\u003c\/th\u003e\n\u003ctd\u003e1.4 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 0.45 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e46 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 1.82 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e42 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore D hardness (ASTM D2240)\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 24 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003e0.50 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiocompatibility (ISO 10993)\u003c\/th\u003e\n\u003ctd\u003eData available on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes (SLA, DLP, MSLA)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"1 kg \/ Clear","offer_id":57323360190808,"sku":"300106","price":74.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris","offer_id":57323360223576,"sku":"300203","price":74.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-st-80-tough-resin.jpg?v=1779193924"},{"product_id":"basf-ultracur3d-st-45-tough-resin","title":"BASF Ultracur3D ST 45 Tough Resin","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® ST 45 is a reactive urethane photopolymer resin developed by BASF Forward AM in its \"Tough\" range. The formulation combines high mechanical strength, long-term toughness and impact resistance for functional parts ranging from prototyping to detailed production components.\u003cbr\u003e\u003cbr\u003eThe resin is available in several colour variants. Processing speed and the surface finish obtained are highlighted by the manufacturer as differentiating factors compared with standard market resins.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eTensile modulus reaches 2300 MPa and tensile strength 60 MPa, with an elongation at break of 25 %. Flexural strength is 110 MPa (modulus 2400 MPa) and Shore D hardness is 80. Notched Izod impact tests give 30 J\/m at 23 °C and 20 J\/m at -30 °C, demonstrating retained behaviour at low temperature. Unnotched Izod strength at 23 °C is 509 J\/m and notched Charpy comes in at 1.3 kJ\/m².\u003c\/p\u003e\n\u003ch2\u003eThermal stability and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHeat deflection temperature (HDT) is 73 °C at 0.45 MPa and 61 °C at 1.82 MPa, which broadens the thermal service range compared with standard resins. UL 94 fire rating at 1.5 mm is HB. The resin is intended for prototyping, housings, highly detailed or textured parts, and custom tooling and gadgets. ISO 10993 biocompatibility and water absorption data are available on request from the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eReactive urethane photopolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eTough\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eDLP, LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 30 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e210 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 50 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e80 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D4052-18a)\u003c\/th\u003e\n\u003ctd\u003e1.12 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.2 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e2300 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e60 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e25 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e2400 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e110 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at -30 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e20 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUnnotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e509 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Charpy at 23 °C (ISO 179-1)\u003c\/th\u003e\n\u003ctd\u003e1.3 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 0.45 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e73 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 1.82 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e61 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFire rating UL 94 (1.5 mm)\u003c\/th\u003e\n\u003ctd\u003eHB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore D hardness (ASTM D2240)\u003c\/th\u003e\n\u003ctd\u003e80\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiocompatibility (ISO 10993)\u003c\/th\u003e\n\u003ctd\u003eData available on request\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 24 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003eData available on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes\u003c\/li\u003e\n  \u003cli\u003eDLP and LCD systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"1 kg \/ Clear","offer_id":57323679056216,"sku":"300155","price":104.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Noir","offer_id":57323774869848,"sku":"S3BA1046","price":114.24,"currency_code":"EUR","in_stock":true},{"title":"5 kg \/ Clear","offer_id":57323679088984,"sku":"300007","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-st-45-tough-resin.jpg?v=1779195730"},{"product_id":"basf-ultracur3d-rg-1100","title":"BASF Ultracur3D RG 1100","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® RG 1100 is a technical urethane-based photopolymer resin developed by BASF Forward AM, positioned by the manufacturer in the \"Rigid\" and \"High Temp\" categories. The formulation targets mechanical properties comparable to those of injection-moulded thermoplastics commonly used in the automotive industry and other demanding sectors.\u003cbr\u003e\u003cbr\u003eThe resin is available in several colours. It combines high rigidity (tensile modulus of 3080 MPa, Shore D hardness of 85), good chemical resistance and documented long-term UV stability.\u003c\/p\u003e\n\u003ch2\u003eThermal performance and mechanical behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHeat deflection temperature (HDT) reaches 116 °C at 0.45 MPa and 84 °C at 1.82 MPa, making it one of the highest in the Ultracur3D range. UL 94 fire rating at 1.5 mm is HB. Tensile strength is 70 MPa with an elongation at break of 5 %, and flexural strength is 119 MPa (modulus 2880 MPa). Notched Izod impact at 23 °C comes out at 16 J\/m and notched Charpy at 0.6 kJ\/m², consistent with a rigid material subject to low deformation.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eWater absorption over 24 hours is limited to 0.32 %, contributing to long-term dimensional stability of parts. The resin is intended for automotive industry connectors, demanding technical parts, external covers, and supports and housings requiring good thermal and chemical resistance.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTechnical urethane photopolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eRigid \/ High Temp\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eDLP, LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 30 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e201 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 50 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e65 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D4052-18a)\u003c\/th\u003e\n\u003ctd\u003e1.12 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.2 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e3080 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e70 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e2880 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e119 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e16 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Charpy at 23 °C (ISO 179-1)\u003c\/th\u003e\n\u003ctd\u003e0.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 0.45 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e116 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 1.82 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e84 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFire rating UL 94 (1.5 mm)\u003c\/th\u003e\n\u003ctd\u003eHB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore D hardness (ASTM D2240)\u003c\/th\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 24 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003e0.32 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUV stability\u003c\/th\u003e\n\u003ctd\u003eLong-term\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes\u003c\/li\u003e\n  \u003cli\u003eDLP and LCD systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"1 kg \/ Clear","offer_id":57324126667096,"sku":"300209","price":128.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Noir","offer_id":57324126699864,"sku":"300280","price":128.0,"currency_code":"EUR","in_stock":true},{"title":"5 kg \/ Noir","offer_id":57324126732632,"sku":"300281","price":616.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-rg-1100-resin.jpg?v=1779197685"},{"product_id":"basf-ultracur3d-st-1400-tough-resin","title":"BASF Ultracur3D ST 1400 Tough Resin","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® ST 1400 is a urethane photopolymer resin developed by BASF Forward AM in its \"Tough\" range. The formulation is positioned by the manufacturer as a compromise between rigid and flexible resins: high ductility, toughness and durability oriented towards parts subject to impacts or repeated deformation.\u003cbr\u003e\u003cbr\u003eElongation at break reaches 43 % and notched Izod impact at 23 °C comes out at 43 J\/m, with a tensile modulus of 1900 MPa and a Shore D hardness of 78. The resin is available in several colours.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eTensile strength is 45 MPa, complemented by a flexural strength of 80 MPa (modulus 1540 MPa). Impact tests underline the ductile character of the material, with an unnotched Izod at 23 °C of 930 J\/m and a notched Charpy of 4.6 kJ\/m². Water absorption over 24 hours remains contained at 0.33 %, contributing to dimensional stability of parts in storage.\u003c\/p\u003e\n\u003ch2\u003eThermal stability and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHeat deflection temperature (HDT) is 57 °C at 0.45 MPa and 48.7 °C at 1.82 MPa, placing the material outside thermally constrained applications. The resin is intended for wearable devices, prosthetic devices and medical accessories, diagnostic equipment, as well as industrial housings, fixtures and supports. ISO 10993 biocompatibility data are available on request from the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUrethane photopolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eTough\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eDLP, LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 30 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e280 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 50 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e90 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D4052-18a)\u003c\/th\u003e\n\u003ctd\u003e1.12 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.2 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e1900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e43 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e1540 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e43 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUnnotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e930 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Charpy at 23 °C (ISO 179-1)\u003c\/th\u003e\n\u003ctd\u003e4.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 0.45 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e57 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 1.82 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e48.7 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore D hardness (ASTM D2240)\u003c\/th\u003e\n\u003ctd\u003e78\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 24 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003e0.33 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiocompatibility (ISO 10993)\u003c\/th\u003e\n\u003ctd\u003eData available on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes\u003c\/li\u003e\n  \u003cli\u003eDLP and LCD systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"Clear \/ 2.2 lbs","offer_id":57324180734296,"sku":"300244","price":97.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-st-1400-tough-resin.jpg?v=1779200179"},{"product_id":"ultracur3d®-rg-35","title":"BASF Ultracur3D RG 35","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® RG 35 is a technical urethane photopolymer resin developed by BASF Forward AM, positioned by the manufacturer in the \"Rigid\" and \"High Temp\" categories. The medium-viscosity, highly reactive formulation targets rigid functional parts combining good dimensional stability, elevated thermal resistance and low water absorption.\u003cbr\u003e\u003cbr\u003eThe resin is available in several colours. The cured part exhibits a tensile modulus of 2600 MPa, a tensile strength of 80 MPa and a Shore D hardness of 85.\u003c\/p\u003e\n\u003ch2\u003eThermal and electrical performance\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eHeat deflection temperature (HDT) reaches 83 °C at 0.45 MPa and 64 °C at 1.82 MPa. UL 94 fire rating at 1.5 mm is HB, complemented by a glow-wire flammability index (GWFI 650 °C \/ 2.0 mm to DIN EN 60695-2-11) and a dielectric strength of 37 kV\/mm. Water absorption over 24 hours remains limited to 0.33 %, contributing to long-term dimensional stability of parts.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eFlexural strength reaches 110 MPa (modulus 2400 MPa) with an elongation at break of 6 %. Notched Izod impact gives 23 J\/m at 23 °C and 11 J\/m at -30 °C, with an unnotched Izod of 115 J\/m and a notched Charpy of 0.6 kJ\/m², consistent with a rigid material subject to low deformation. The resin is intended for automotive housings, jigs and assembly fixtures, moulds and inserts, and moulded electrical parts. ISO 10993 biocompatibility data are available on request.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eTechnical urethane photopolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eRigid \/ High Temp\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eDLP, LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 30 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e600 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 50 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e150 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D4052-18a)\u003c\/th\u003e\n\u003ctd\u003e1.12 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.2 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ASTM D638, 50 mm\/min)\u003c\/th\u003e\n\u003ctd\u003e2600 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D638, 50 mm\/min)\u003c\/th\u003e\n\u003ctd\u003e80 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D638, 50 mm\/min)\u003c\/th\u003e\n\u003ctd\u003e6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e2400 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e110 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at -30 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e11 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e23 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUnnotched Izod at 23 °C (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e115 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Charpy at 23 °C (ISO 179-1)\u003c\/th\u003e\n\u003ctd\u003e0.6 kJ\/m²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 0.45 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e83 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 1.82 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e64 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFire rating UL 94 (1.5 mm)\u003c\/th\u003e\n\u003ctd\u003eHB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eGlow-wire flammability test (DIN EN 60695-2-11)\u003c\/th\u003e\n\u003ctd\u003eGWFI: 650 °C \/ 2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDielectric strength (DIN EN 60243-1)\u003c\/th\u003e\n\u003ctd\u003e37 kV\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore D hardness (ASTM D2240)\u003c\/th\u003e\n\u003ctd\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 24 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003e0.33 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiocompatibility (ISO 10993)\u003c\/th\u003e\n\u003ctd\u003eData available on request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes\u003c\/li\u003e\n  \u003cli\u003eDLP and LCD systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"B - Noir \/ 2.2 lbs","offer_id":57324243550552,"sku":"300240","price":116.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-rg-35-rigid-resin_2_f1635037-ce6c-458e-808c-90dc2ffa0e68.jpg?v=1779200864"},{"product_id":"basf-ultracur3d-fl-300","title":"BASF Ultracur3D FL 300","description":"\u003cp style=\"text-align: justify;\"\u003eUltracur3D® FL 300 is a urethane photopolymer resin developed by BASF Forward AM in its \"Flexible\" range. The formulation is designed for flexible and elastomeric parts, with a Shore A hardness of 40 and an elongation at break of 245 %, placing the material in the soft elastomer family.\u003cbr\u003e\u003cbr\u003eThe resin is available in several colours and can also be tinted by adding pigments to the vat. It has been validated by the manufacturer on a variety of 3D printers, enabling its integration into open, configurable material systems.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eTensile strength is 5 MPa (ASTM D412 C) with an elongation at break of 245 %. Graves tear strength (ASTM D624 type C) reaches 9 N\/mm. Rebound resilience (ASTM D1054) is 16 %, and compression set at 23 °C over 72 hours (ASTM D395-B) comes out at 31 %, consistent with the damping behaviour typical of soft elastomers.\u003c\/p\u003e\n\u003ch2\u003eProcessing and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe resin has a low viscosity of 160 mPa·s at 30 °C, reduced to 75 mPa·s at 50 °C, facilitating circulation and drainage in the vat. Liquid resin density is 1.01 g\/cm³ and cured part density is 1.07 g\/cm³. It is intended for the production of damping and energy-absorbing parts: handles, shoe soles, flexible seals and vibration-absorbing components.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eUrethane photopolymer\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCategory\u003c\/th\u003e\n\u003ctd\u003eFlexible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours; tintable with pigments\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLight source\u003c\/th\u003e\n\u003ctd\u003eDLP, LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 30 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e160 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 50 °C (cone\/plate rheometer)\u003c\/th\u003e\n\u003ctd\u003e75 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D4052-18a)\u003c\/th\u003e\n\u003ctd\u003e1.01 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.07 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D412 C)\u003c\/th\u003e\n\u003ctd\u003e5 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D412 C)\u003c\/th\u003e\n\u003ctd\u003e245 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eGraves tear strength (ASTM D624 type C)\u003c\/th\u003e\n\u003ctd\u003e9 N\/mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRebound resilience (ASTM D1054)\u003c\/th\u003e\n\u003ctd\u003e16 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompression set 23 °C \/ 72 h (ASTM D395-B)\u003c\/th\u003e\n\u003ctd\u003e31 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore A hardness (ASTM D2240)\u003c\/th\u003e\n\u003ctd\u003e40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes\u003c\/li\u003e\n  \u003cli\u003eDLP and LCD systems\u003c\/li\u003e\n  \u003cli\u003eOpen, configurable material systems (formulation validated by manufacturer on various 3D printers)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"Clear \/ 2.2 lbs","offer_id":57324344443224,"sku":"300110","price":118.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/basf-ultracur3d-fl-300-transparent-1000g.jpg?v=1779201731"},{"product_id":"loctite-3d-pro410-black-1","title":"Loctite 3D PRO410 Black","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D PRO410 is a high-precision rigid photopolymer resin developed by Henkel for additive manufacturing by vat photopolymerisation (DLP and LCD) at 385 nm. The formulation is optimised for fast print speed and high surface quality, making it a proven material for machine calibration and setup, and for rapid prototyping of precise parts.\u003cbr\u003e\u003cbr\u003eThe resin is available in several colours. The post-processed part has a tensile modulus of approximately 1900 MPa and a Shore D hardness of 71–73.\u003c\/p\u003e\n\u003ch2\u003eMechanical and thermal behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePost-processing tensile strength is 47–49 MPa with an elongation at break of 4–6 %. In bending, modulus reaches 2481–2517 MPa with a maximum stress of 82–86 MPa. Notched Izod impact is 20–28 J\/m. Heat deflection temperature (HDT) is 66–76 °C at 0.455 MPa and 51–55 °C at 1.82 MPa, with a DMA glass transition temperature (Tg) of 80–84 °C. The resin is thus suited to parts exposed up to approximately 60 °C.\u003c\/p\u003e\n\u003ch2\u003eProcessing and post-processing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe resin prints at 385 nm on DLP and LCD, at an intensity of 4–8 mW\/cm² and between 20 and 25 °C, with a typical layer thickness of 100 µm. Post-processing involves ultrasonic IPA bath cleaning (2 × 2 min), compressed-air drying, then a one-hour wait at ambient temperature before UV post-cure (405 nm LED or broad-spectrum lamp 365–380 nm depending on equipment). An ISO 10993-23 (irritation) biocompatibility evaluation is documented as compliant by the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eRigid photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProcess\u003c\/th\u003e\n\u003ctd\u003eVat photopolymerisation (DLP, LCD)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWavelength\u003c\/th\u003e\n\u003ctd\u003e385 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C (ASTM D7867)\u003c\/th\u003e\n\u003ctd\u003e400–600 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid resin density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.1 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCured part density (ASTM D792)\u003c\/th\u003e\n\u003ctd\u003e1.354 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eProcessing temperature\u003c\/th\u003e\n\u003ctd\u003e20–25 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended exposure intensity\u003c\/th\u003e\n\u003ctd\u003e4–8 mW\/cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended layer thickness\u003c\/th\u003e\n\u003ctd\u003e100 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile modulus (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e1890–1986 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e47–49 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break (ASTM D638)\u003c\/th\u003e\n\u003ctd\u003e4–6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e2481–2517 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaximum flexural stress (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e82–86 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural elongation (ASTM D790)\u003c\/th\u003e\n\u003ctd\u003e\u0026gt; 5 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched Izod (ASTM D256)\u003c\/th\u003e\n\u003ctd\u003e20–28 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 0.455 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e66–76 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT at 1.82 MPa (ASTM D648)\u003c\/th\u003e\n\u003ctd\u003e51–55 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTg DMA tanδ (ASTM E1640)\u003c\/th\u003e\n\u003ctd\u003e80–84 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eShore D hardness (ASTM D2240, 5 s)\u003c\/th\u003e\n\u003ctd\u003e71–73\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 24 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003e0.20–0.30 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption 72 h (ASTM D570)\u003c\/th\u003e\n\u003ctd\u003e0.49–0.61 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal conductivity (ASTM D5930)\u003c\/th\u003e\n\u003ctd\u003e0.204–0.206 W\/(m·K)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal capacity (ASTM D5930)\u003c\/th\u003e\n\u003ctd\u003e1.211–1.231 J\/(g·K)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBiocompatibility (ISO 10993-23, irritation)\u003c\/th\u003e\n\u003ctd\u003eCompliant\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eStorage\u003c\/th\u003e\n\u003ctd\u003e8–30 °C, dry location, sealed container\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eVat photopolymerisation processes\u003c\/li\u003e\n  \u003cli\u003eDLP and LCD printers at 385 nm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"1 kg \/ Noir","offer_id":57324548555096,"sku":"2730444","price":80.0,"currency_code":"EUR","in_stock":true},{"title":"5 kg \/ Noir","offer_id":57324548587864,"sku":"2730445","price":400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/loctite-3d-pro410_44907559-17f1-41e0-94cb-41883c756e01.png?v=1779204775"},{"product_id":"prusament-pc-nfc","title":"Prusament PC Blend (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend is a premium polycarbonate filament manufactured in-house by Prusa Research, available in several colours. Its formulation is positioned as an engineering material for functional parts subject to high thermal and mechanical stresses, with a service temperature up to 113 °C and good cold-creep resistance.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.03 mm. A QR code gives access to detailed spool parameters (diameter, ovality, colour, mechanical properties) on prusament.com, for complete traceability in workshop and series production.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePC Blend prints at 275 ±10 °C on a heated build plate at 110 ±10 °C, with a satin steel sheet recommended by the manufacturer. An enclosed chamber or tall brim around the part is advised to limit shrinkage and warping, which are particularly pronounced on large parts despite improved dimensional stability compared with most polycarbonates on the market. The material has low moisture absorption, good electrical insulation properties, and contains no styrene (a non-toxic alternative to ASA). It is intended for advanced users; PLA or PETG is preferable for learning FDM printing.\u003c\/p\u003e\n\u003ch2\u003ePackaging and traceability\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eRecent spools are fitted with a fully rewritable OpenPrintTag NFC tag operating offline: the printer automatically recognises the spool and accesses essential material data without dependency on a cloud service or proprietary ecosystem. The redesigned spool incorporates a locking mechanism facilitating removal for use as a refill, and remains stable during filament drying at recommended temperatures. A filament length of approximately 330 m is obtained from a 900 g spool.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePC Blend (polycarbonate)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAppearance\u003c\/th\u003e\n\u003ctd\u003eAvailable in several colours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm (±0.03 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature (nozzle)\u003c\/th\u003e\n\u003ctd\u003e275 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e110 ±10 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended print surface\u003c\/th\u003e\n\u003ctd\u003eSatin steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePart service temperature\u003c\/th\u003e\n\u003ctd\u003eUp to 113 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMoisture absorption\u003c\/th\u003e\n\u003ctd\u003eVery low\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElectrical properties\u003c\/th\u003e\n\u003ctd\u003eGood insulation properties\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eComposition\u003c\/th\u003e\n\u003ctd\u003eStyrene-free\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUser level\u003c\/th\u003e\n\u003ctd\u003eAdvanced\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e900 g spool (approx. 330 m of filament)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eRewritable OpenPrintTag NFC tag\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTraceability\u003c\/th\u003e\n\u003ctd\u003eQR code with access to spool parameters on prusament.com\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers accepting nozzle temperatures around 275 °C and bed temperatures around 110 °C\u003c\/li\u003e\n  \u003cli\u003eEnclosed chamber recommended for large parts\u003c\/li\u003e\n  \u003cli\u003ePrusa MK4, MK4S, MK3.9, MK3.9S, XL and CORE One printers\u003c\/li\u003e\n  \u003cli\u003eAutomatic spool recognition on any OpenPrintTag-compatible system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"2 lbs \/ Jet Black \/ 1.75 mm","offer_id":57332195361112,"sku":"IDF__17566_IDS__3495","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Urban Grey \/ 1.75 mm","offer_id":57332195393880,"sku":"IDF__17565_IDS__3496","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Nature \/ 1.75 mm","offer_id":57332195426648,"sku":"IDF__17564_IDS__3497","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Orange \/ 1.75 mm","offer_id":57332195459416,"sku":"IDF__17567_IDS__3498","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 lbs \/ Prusa Pro Green \/ 1.75 mm","offer_id":57332195492184,"sku":"IDF__17607_IDS__3499","price":42.49,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ Jet Black \/ 1.75 mm","offer_id":57332195524952,"sku":"IDF__25072_IDS__3950","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Prusa_PC_JET_BLACK_900G.jpg?v=1779262254"},{"product_id":"prusament-pc-blend-carbon-fiber-black-nfc","title":"Prusament PC Blend Carbon Fibre Black (NFC)","description":"\u003cp style=\"text-align: justify;\"\u003ePrusament PC Blend Carbon Fiber is a technical filament manufactured in-house by Prusa Research, based on polycarbonate reinforced with recycled carbon fibres from the production process. This formulation delivers increased rigidity, good dimensional stability and a high service temperature compared with unfilled PC Blend, while remaining easier to print.\u003cbr\u003e\u003cbr\u003eEach spool meets a controlled dimensional tolerance of ±0.04 mm. Production parameters for each batch (measured diameter, ovality, colour) are accessible online via the QR code on the spool. The filament is available in several colours.\u003c\/p\u003e\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF prints at 285 °C with a heated build plate at 110 °C, without the need for an enclosed chamber thanks to limited shrinkage that allows large models to be printed. A satin or powder-coated TXT steel sheet gives good adhesion; on smooth PEI, apply a thin layer of glue stick to protect the surface.\u003cbr\u003e\u003cbr\u003eUse of a hardened steel nozzle is mandatory: carbon fibres are abrasive and quickly wear out a brass nozzle. The filament does not require pre-drying before printing.\u003c\/p\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePCCF is intended for technical parts requiring mechanical strength, rigidity and a service temperature up to 114 °C, raised to 130 °C after annealing. It also offers good UV stability and resistance to common chemicals, with a matt surface finish. It is suited to functional components, supports, fixings, workshop tooling and jigs subject to moderate thermal stresses. Note that it remains slightly more brittle than unfilled PC Blend.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eCarbon-fibre-filled PC Blend (PCCF)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDimensional tolerance\u003c\/th\u003e\n\u003ctd\u003e±0.04 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eExtrusion temperature\u003c\/th\u003e\n\u003ctd\u003e285 °C (range 275–295 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBed temperature\u003c\/th\u003e\n\u003ctd\u003e110 °C (range 100–120 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate\u003c\/th\u003e\n\u003ctd\u003eSatin or powder-coated TXT steel sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRequired nozzle\u003c\/th\u003e\n\u003ctd\u003eHardened steel mandatory\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 114 °C (130 °C after annealing)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eUV stability\u003c\/th\u003e\n\u003ctd\u003eGood\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eCommon chemicals\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePre-drying before printing\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eEnclosed chamber\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003e2 kg on spool\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIdentification\u003c\/th\u003e\n\u003ctd\u003eOpenPrintTag NFC tag (rewritable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers equipped with a hardened steel nozzle\u003c\/li\u003e\n  \u003cli\u003eOptimised for Prusa MK3S+, MK4, MK4S, XL and CORE One\u003c\/li\u003e\n  \u003cli\u003eCompatible with multi-material and multicolour systems via OpenPrintTag NFC tag\u003c\/li\u003e\n  \u003cli\u003eDedicated 2 kg spool holder required (not compatible with the standard spool holder)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Prusa","offers":[{"title":"0.8 kg \/ 1.75 mm","offer_id":57332761264472,"sku":"IDF__17588_IDS__3489","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm","offer_id":57332761297240,"sku":"IDF__17616_IDS__3946","price":112.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/prusament_pc_fiber_black_800.jpg?v=1779269592"},{"product_id":"loctite-3d-3843-matte-black-1kg","title":"Loctite 3D 3843 Matte Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D 3843 is a technical resin intended for professional SLA and MSLA 3D printers. Validated by Henkel in collaboration with Prusa Research for use on the SL1S SPEED platform, this high-toughness resin combines impact resistance, dimensional stability and mechanical behaviour suited to functional parts.\u003cbr\u003e\u003cbr\u003eIts formulation delivers a homogeneous surface finish and good handling resistance after curing. It is suited to the production of jigs, fixtures, manufacturing aids, covers and housings requiring controlled mechanical performance at ambient temperature.\u003c\/p\u003e\n\u003ch2\u003ePost-processing and implementation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe manufacturer recommends a specific post-processing protocol to ensure the stated mechanical properties. Cleaning can be carried out using a mixture of Loctite 3D Printing Cleaner C, compressed air and IPA before final curing.\u003cbr\u003e\u003cbr\u003eThe resin has moderate thermal resistance with an HDT of 63 °C, which makes it primarily suited to technical applications not exposed to sustained high thermal stresses. The range is available in several references and colours depending on production needs.\u003c\/p\u003e\n\u003ch2\u003eIndustrial applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThanks to its impact resistance and good rigidity after post-processing, this resin is suited to advanced prototyping environments, light tooling and the production of retention elements. Its printing behaviour allows the production of detailed parts with precision compatible with industrial use and product development workshops.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePrint technology\u003c\/th\u003e\n\u003ctd\u003eSLA \/ MSLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eHigh-toughness technical resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThermal resistance (HDT)\u003c\/th\u003e\n\u003ctd\u003e63 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSurface finish\u003c\/th\u003e\n\u003ctd\u003eMatt and homogeneous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003eJigs, fixtures, manufacturing aids, housings, covers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended post-processing\u003c\/th\u003e\n\u003ctd\u003eLoctite 3D Printing Cleaner C, compressed air and IPA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several references\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional SLA and MSLA 3D printers\u003c\/li\u003e\n\u003cli\u003eCompatible with Original Prusa SL1S SPEED\u003c\/li\u003e\n\u003cli\u003eCompatible with UV post-processing systems adapted to technical resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57366466658648,"sku":"2596649","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/5728.jpg?v=1779714114"},{"product_id":"loctite-3d-ind405-black-1kg","title":"Loctite 3D IND405 Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND405 HDT50 is a technical photopolymer resin formulated for applications requiring a good balance between mechanical strength, elongation and impact resistance. Intended for compatible DLP and MSLA processes, it enables the production of functional parts, jigs, housings and tooling with controlled rigidity and a homogeneous surface finish.\u003cbr\u003e\u003cbr\u003eIts single-component formulation simplifies implementation in prototyping or production environments. After UV curing and post-processing, the resulting parts retain mechanical properties suited to technical applications subject to repeated loading.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour and post-processing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eIND405 HDT50 is distinguished by high impact resistance combined with a high elongation rate for an engineering-type resin. This combination limits the brittleness typically observed in standard resins and improves the performance of functional parts in everyday use.\u003cbr\u003e\u003cbr\u003eThe material can be machined, drilled, tapped or polished after printing depending on finishing and assembly requirements. Several references and finishes are available depending on production needs and visual inspection requirements.\u003c\/p\u003e\n\u003ch2\u003eIndustrial applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis resin is suited to functional prototyping, manufacturing aids, geometric validation parts and small-series components requiring dimensional stability and mechanical strength. It is also suited to R\u0026amp;D environments and workshops looking for a technical resin compatible with industrial post-processing cycles.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ MSLA \/ LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eTechnical photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e52 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e1378 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e127 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e69 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e1500 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e71.6 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHDT\u003c\/th\u003e\n\u003ctd\u003e53 °C at 0.455 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 76–79\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e2200–2400 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.046–1.050 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSolid density\u003c\/th\u003e\n\u003ctd\u003e1.121–1.134 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWater absorption\u003c\/th\u003e\n\u003ctd\u003e2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several packaging formats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional DLP 3D printers\u003c\/li\u003e\n\u003cli\u003eMSLA and LCD printers compatible with technical resins\u003c\/li\u003e\n\u003cli\u003eLOCTITE 3D validated additive manufacturing systems\u003c\/li\u003e\n\u003cli\u003eCompatible with certain Carbon platforms and industrial DLP equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57366588457304,"sku":"2683503","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/loctite-3d-ind-405-hdt-50-noir-1kg-produit.jpg?v=1779715854"},{"product_id":"loctite-3d-ind6845-black-1kg","title":"Loctite 3D IND3380 Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND3380 is a technical photopolymer resin formulated for industrial applications requiring high thermal resistance and durable ESD properties. Designed for compatible DLP and MSLA processes, it enables the production of rigid parts with good dimensional stability and chemical resistance suited to electronics manufacturing and assembly environments.\u003cbr\u003e\u003cbr\u003eIts formulation is optimised for applications subject to elevated temperatures, including jigs, technical supports, housings or handling components used in electronic and industrial manufacturing lines.\u003c\/p\u003e\n\u003ch2\u003eThermal behaviour and ESD properties\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eIND3380 is characterised by a high heat deflection temperature combined with stable ESD dissipative properties over time. This combination enables the production of functional parts intended for electrostatic discharge-sensitive environments, while maintaining significant rigidity after UV post-processing.\u003cbr\u003e\u003cbr\u003eThe material also exhibits isotropic behaviour limiting mechanical weaknesses on the Z-axis. The surface finish obtained after printing and curing is suited to technical parts requiring fine details and controlled geometry.\u003c\/p\u003e\n\u003ch2\u003eIndustrial applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThis resin is suited to the production of low-pressure tooling, ESD trays, electronic component supports, assembly jigs or functional parts exposed to thermal stresses. Several references and packaging formats are available depending on production needs and usage volumes.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ MSLA \/ LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eESD technical photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT\u003c\/th\u003e\n\u003ctd\u003e190 °C at 0.455 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e50 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e3000 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e3400 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e13 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 86\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSpecific property\u003c\/th\u003e\n\u003ctd\u003eDissipative ESD protection\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eChemical resistance\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP resin 3D printers\u003c\/li\u003e\n  \u003cli\u003eMSLA and LCD printers compatible with technical resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with certain industrial P3 and high-temperature DLP platforms\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57366692987224,"sku":"3021380","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/copy-of-resine-ind3380-loctite-3d.png?v=1779716661"},{"product_id":"loctite-3d-ind402-black-1kg","title":"Loctite 3D IND402 Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND402 A70 High Rebound is an elastomeric photopolymer resin designed for the production of flexible parts requiring high elastic recovery and good mechanical fatigue resistance. Compatible with DLP and MSLA processes, it enables the production of flexible components intended for functional prototyping, damping interfaces or contact parts subject to repeated deformation.\u003cbr\u003e\u003cbr\u003eIts polyurethane formulation offers behaviour close to certain industrial elastomers with controlled deformation after compression. The resin is suited to R\u0026amp;D environments and applications requiring stable flexibility after UV post-processing.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eIND402 A70 High Rebound is characterised by intermediate Shore A hardness combined with high elongation and significant energy restitution after bending or compression. This combination limits the permanent deformation phenomena observed in certain standard flexible resins and enables the production of technical parts with controlled elastic behaviour.\u003cbr\u003e\u003cbr\u003eThe material is suited to the production of seals, guards, shock-absorbing elements, handles, flexible interfaces or retention components requiring good mechanical resilience.\u003c\/p\u003e\n\u003ch2\u003ePost-processing and applications\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eAfter printing, parts require cleaning and UV curing to achieve final mechanical properties. The resin can be used for functional prototypes, ergonomic validation parts or small technical series incorporating flexible zones. Several references and finishes are available depending on production requirements.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ MSLA \/ LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eElastomeric photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore A 70\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e7 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e230 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTear strength\u003c\/th\u003e\n\u003ctd\u003e24 kN\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eResilience\u003c\/th\u003e\n\u003ctd\u003eHigh\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompression set\u003c\/th\u003e\n\u003ctd\u003eLow\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e950 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.08 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP resin 3D printers\u003c\/li\u003e\n  \u003cli\u003eMSLA and LCD printers compatible with flexible resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with UV post-processing equipment for technical resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57366728180056,"sku":"2683501","price":250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/resine-ind402a70-highrebound-loctite3d.png?v=1779717530"},{"product_id":"loctite-3d-pro476-black-1kg","title":"Loctite 3D PRO476 Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D PRO476 is a technical photopolymer resin developed for the production of rigid parts requiring a good level of dimensional precision and mechanical strength suited to functional prototyping applications. Compatible with DLP, LCD and MSLA technologies, it enables the production of detailed parts with a homogeneous finish and controlled shrinkage after curing.\u003cbr\u003e\u003cbr\u003eIts formulation is designed for professional environments looking for a versatile resin for geometric validation, technical assemblies or small-series components requiring good stability after printing and UV post-processing.\u003c\/p\u003e\n\u003ch2\u003eMechanical behaviour and printing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePRO476 exhibits a balance of rigidity, impact resistance and dimensional stability. This behaviour enables the production of technical parts capable of withstanding repeated handling, assembly operations or moderate mechanical stresses.\u003cbr\u003e\u003cbr\u003eThe controlled viscosity of the resin promotes stable processing on compatible DLP and MSLA equipment. The surfaces obtained after printing present a level of detail suited to functional prototypes, housings, jigs and mechanical integration elements.\u003c\/p\u003e\n\u003ch2\u003eApplications and post-processing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eAfter cleaning and UV curing, parts can be sanded, drilled or painted depending on finishing requirements. This resin is suited to prototyping workshops, R\u0026amp;D departments and industrial environments looking for a technical material for rapid production of validation parts or non-structural components. Several references and packaging formats are available depending on production needs.\u003c\/p\u003e\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ LCD \/ MSLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eRigid photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e50 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e1900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e30 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e85 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e32 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 80\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e450 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.10 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP 3D printers\u003c\/li\u003e\n  \u003cli\u003eLCD and MSLA printers compatible with technical resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with UV post-processing equipment for photopolymer resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57366819766616,"sku":"2737962","price":120.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/resine-pro476-loctite-3d.png?v=1779718284"},{"product_id":"loctite-3d-ind475-black-1kg","title":"Loctite 3D IND475 Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND475 is a technical photopolymer resin developed for the production of rigid parts intended for industrial applications and functional prototyping. Compatible with DLP, LCD and MSLA processes, it delivers parts with good dimensional stability suited to assembly operations, geometric validation or repeated handling.\u003cbr\u003e\u003cbr\u003eIts formulation is optimised to produce technical parts with a homogeneous finish and impact resistance superior to that of standard resins. It is suited to production environments looking for a versatile resin for rapid development cycles and functional short series.\u003c\/p\u003e\n\n\u003ch2\u003eMechanical behaviour and post-processing\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eIND475 combines rigidity, impact resistance and moderate elongation to limit brittle failure during handling or mechanical assemblies. After cleaning and UV curing, parts retain mechanical properties suited to functional validation applications and non-structural components.\u003cbr\u003e\u003cbr\u003eThe material can be sanded, drilled or painted according to finishing constraints. Its controlled viscosity also facilitates processing on compatible resin printers used in prototyping workshops or industrial environments.\u003c\/p\u003e\n\n\u003ch2\u003eIndustrial applications\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThis resin is suited to the production of jigs, housings, covers, technical prototypes, assembly aids or dimensional validation parts. Several references and packaging formats are available depending on production needs and integration constraints.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ LCD \/ MSLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eRigid photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e56 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e1900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e35 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e95 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e45 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 80\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e450 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.10 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP 3D printers\u003c\/li\u003e\n  \u003cli\u003eLCD and MSLA printers compatible with technical resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with UV post-processing equipment for photopolymer resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57366982033752,"sku":"2842828","price":225.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/loctite_3d_ind475_resin_-_black_-_1kg_product_image.png?v=1779805861"},{"product_id":"loctite-3d-ind405-clear-1kg","title":"Loctite 3D IND405 Clear 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND405 HDT50 is a technical photopolymer resin designed for applications requiring a balance between mechanical strength, impact resistance and moderate thermal stability. Compatible with DLP, LCD and MSLA processes, it enables the production of functional parts with good dimensional precision and a homogeneous surface finish after printing and UV post-processing.\u003cbr\u003e\u003cbr\u003eIts polyurethane formulation is suited to the production of functional prototypes, jigs, housings or technical elements subject to repeated mechanical stresses. Several references and finishes are available depending on production needs and integration constraints.\u003c\/p\u003e\n\n\u003ch2\u003eMechanical and thermal behaviour\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eIND405 HDT50 combines rigidity, impact resistance and high elongation for a technical engineering-type resin. This combination limits part brittleness while maintaining good mechanical strength during assembly operations or repeated handling.\u003cbr\u003e\u003cbr\u003eAfter UV curing, parts retain a heat deflection temperature suited to advanced prototyping environments and industrial applications not exposed to extreme temperatures. The material can also be drilled, machined or sanded according to finishing requirements.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and implementation\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThis resin is suited to prototyping workshops, R\u0026amp;D departments and industrial environments looking for a technical material for the production of functional parts, tooling or validation components. Its controlled viscosity facilitates processing on compatible resin printers using professional DLP or MSLA processes.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ LCD \/ MSLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eTechnical photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e52 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e1378 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e127 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e69 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e1500 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e71.6 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT\u003c\/th\u003e\n\u003ctd\u003e53 °C at 0.455 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 76–79\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e2200–2400 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.046–1.050 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eSolid density\u003c\/th\u003e\n\u003ctd\u003e1.121–1.134 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eWater absorption\u003c\/th\u003e\n\u003ctd\u003e2 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP 3D printers\u003c\/li\u003e\n  \u003cli\u003eLCD and MSLA printers compatible with technical resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with UV post-processing equipment for photopolymer resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57367092920664,"sku":"2683270","price":180.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/loctite-3d-ind-405-hdt-50-transparent-1kg-produit.jpg?v=1779719878"},{"product_id":"loctite-3d-ind249-black-1kg","title":"Loctite 3D IND249 Black 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND249 is a technical photopolymer resin developed for the production of rigid parts intended for industrial applications and functional prototyping. Compatible with DLP, LCD and MSLA processes, it delivers parts with good dimensional stability and mechanical strength suited to technical uses requiring precision and repeatability.\u003cbr\u003e\u003cbr\u003eIts formulation is optimised for production environments looking for a material capable of retaining its properties after UV post-processing and repeated handling. It is suited to the production of jigs, housings, technical prototypes or functional validation components.\u003c\/p\u003e\n\n\u003ch2\u003eMechanical behaviour and implementation\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eIND249 exhibits high rigidity combined with impact resistance suited to advanced prototyping applications and non-structural parts. The material also offers good surface quality after printing, facilitating finishing and mechanical integration operations.\u003cbr\u003e\u003cbr\u003eIts controlled viscosity promotes stable printing on compatible resin systems. After cleaning and UV curing, parts can be drilled, sanded or painted according to post-processing constraints and production requirements.\u003c\/p\u003e\n\n\u003ch2\u003eIndustrial applications\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThis resin is suited to prototyping workshops, R\u0026amp;D departments and industrial environments requiring rapid production of technical parts. It can be used for the production of assembly aids, covers, housings, functional mock-ups or geometric validation elements. Several references and packaging formats are available depending on production needs.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ LCD \/ MSLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eRigid photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e57 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e1650 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e65 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e90 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2100 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e38 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 82\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e900 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.10 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT\u003c\/th\u003e\n\u003ctd\u003e73 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP 3D printers\u003c\/li\u003e\n  \u003cli\u003eLCD and MSLA printers compatible with technical resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with UV post-processing equipment for photopolymer resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57367181394264,"sku":"2938284","price":260.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/resine-ind249-black-loctite-3d.png?v=1779720638"},{"product_id":"loctite-3d-ind3785-white-1kg","title":"Loctite 3D IND3785 White 1 kg","description":"\u003cp style=\"text-align: justify;\"\u003eLOCTITE 3D IND3785 is a technical photopolymer resin formulated for industrial applications requiring high mechanical strength and good thermal stability. Compatible with DLP, LCD and MSLA processes, it enables the production of rigid parts intended for functional prototyping, tooling and technical components subject to repeated mechanical stresses.\u003cbr\u003e\u003cbr\u003eIts reinforced formulation is suited to production environments looking for a resin capable of retaining its properties after UV polymerisation and extended use. It is suited to the production of jigs, technical supports, housings or functional elements requiring good dimensional stability.\u003c\/p\u003e\n\n\u003ch2\u003eMechanical and thermal behaviour\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eIND3785 combines high rigidity, flexural strength and thermal stability to limit deformation during assembly or technical use phases. This behaviour enables the production of parts suited to industrial applications requiring mechanical strength superior to that of standard resins.\u003cbr\u003e\u003cbr\u003eAfter cleaning and UV post-processing, parts present a homogeneous finish compatible with drilling, sanding or painting operations. The controlled viscosity of the material also facilitates processing on professional resin equipment.\u003c\/p\u003e\n\n\u003ch2\u003eIndustrial applications\u003c\/h2\u003e\n\n\u003cp style=\"text-align: justify;\"\u003eThis resin is intended for prototyping workshops, R\u0026amp;D departments and industrial environments looking for a rigid material for the rapid production of functional parts. It can be used for assembly aids, technical components, housings or mechanical validation parts. Several references and packaging formats are available depending on production needs.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible technology\u003c\/th\u003e\n\u003ctd\u003eDLP \/ LCD \/ MSLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial type\u003c\/th\u003e\n\u003ctd\u003eRigid photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e84 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eYoung's modulus\u003c\/th\u003e\n\u003ctd\u003e3200 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e6 %\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e110 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e3400 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNotched IZOD impact resistance\u003c\/th\u003e\n\u003ctd\u003e20 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore D 86\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHDT\u003c\/th\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eViscosity at 25 °C\u003c\/th\u003e\n\u003ctd\u003e900 cP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eLiquid density\u003c\/th\u003e\n\u003ctd\u003e1.15 g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003eAvailable in several formats\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable finishes\u003c\/th\u003e\n\u003ctd\u003eAvailable in several finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProfessional DLP 3D printers\u003c\/li\u003e\n  \u003cli\u003eLCD and MSLA printers compatible with technical resins\u003c\/li\u003e\n  \u003cli\u003eLOCTITE 3D material-compatible additive manufacturing systems\u003c\/li\u003e\n  \u003cli\u003eCompatible with UV post-processing equipment for photopolymer resins\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":57367257448792,"sku":"3021389","price":260.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ind3785-shop-1024x1024.png?v=1779721211"},{"product_id":"universal-ultra-plc-cf-volumic","title":"UNIVERSAL Ultra PLC-CF – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eUNIVERSAL ULTRA Carbon is the carbon fibre-filled variant of Volumic's PLC (Polylactic acid Compound) composite. Retaining the base of the UNIVERSAL ULTRA range (high rigidity, thermal resistance up to 160 °C peak and 115 °C continuous, processing close to standard PLA), it adds a long carbon fibre reinforcement that significantly increases mechanical strength and thermal resistance, and brings the characteristic matt surface finish of filled materials.\u003cbr\u003e\u003cbr\u003eThis formulation is dedicated to functional parts under high mechanical stress: workshop jigs, supports, lightweight structural parts, prototypes close to the behaviour of production parts. Several packaging formats and colours are offered in the UNIVERSAL ULTRA range.\u003c\/p\u003e\n\n\u003ch2\u003eProcessing\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at a recommended nozzle temperature of 225 °C on a heated build plate at 60 °C. The presence of long fibres mandates a steel nozzle (brass and copper\/nickel wear rapidly) and a minimum diameter of 0.5 mm: a standard 0.4 mm nozzle will cause constant blockages. Build plate adhesion is ultra-strong, best exploited on a very lightly sprayed plate to preserve ease of removal at the end of printing.\u003cbr\u003e\u003cbr\u003eBeyond this tooling constraint, the processing difficulty is rated \"very easy\" by the manufacturer, making it a composite consumable accessible to operators not specialised in filled materials.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with a desiccant after opening, to preserve extrusion properties. Technical data sheet and safety data sheet (MSDS) available from the distributor for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLC – Polylactic acid Compound with carbon fibre fill\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eReinforcement\u003c\/th\u003e\n\u003ctd\u003eLong carbon fibres\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eCharacteristic appearance of carbon-filled materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e225 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate temperature\u003c\/th\u003e\n\u003ctd\u003e60 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eThermal resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 160 °C peak \/ 115 °C continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eSteel mandatory\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMinimum nozzle diameter\u003c\/th\u003e\n\u003ctd\u003e0.5 mm (0.4 mm prohibited: guaranteed blockages)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eUltra-strong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eVery lightly sprayed plate\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eVery easy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish quality\u003c\/th\u003e\n\u003ctd\u003eExcellent\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial characteristics\u003c\/th\u003e\n\u003ctd\u003eHigh mechanical strength, increased rigidity, enhanced thermal resistance, biodegradable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFDM printers with 1.75 mm filament equipped with a steel nozzle ≥ 0.5 mm\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream, SH and EXO printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers capable of printing fibre-filled composites (Prusa MK4\/MK3.9\/XL\/CORE One, Bambu Lab X1, Creality K1, etc.) subject to appropriate equipment\u003c\/li\u003e\n  \u003cli\u003eApplications: workshop jigs, technical supports, lightweight structural parts, functional prototypes under high mechanical stress, near-production-behaviour validation parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ 1.75 mm","offer_id":57371706982744,"sku":"UNIV1131","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"2.3 kg \/ 1.75 mm","offer_id":57371707015512,"sku":"UNIV5627","price":115.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/universal-ultra-1kg-carbone-3_dd6ccb9a-6e8f-4bd5-8776-436d5ae56543.jpg?v=1779783289"},{"product_id":"bumper-ultra-volumic","title":"Bumper Ultra – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eBumper ULTRA is a high-performance semi-flexible filament developed by Volumic, with Shore 60D hardness, specifically positioned for the manufacture of impact-resistant objects. Its hardness places it between standard soft TPUs and rigid thermoplastics: it provides elastic deformation under impact, good tear resistance and rapid shape recovery after stress — properties sought for parts subject to repeated impacts or high dynamic loads.\u003cbr\u003e\u003cbr\u003eTypical applications: bumpers, buffers, dampers, edge protectors, anti-vibration supports, protective casings, handling jigs. Several colours are offered in the range.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eBumper ULTRA prints at a recommended nozzle temperature of 230 °C on a heated build plate at 50 °C, with a brass or copper nozzle. Its strong build plate adhesion requires a sprayed plate (3DLac-type spray) to ensure clean removal at the end of printing without surface degradation. Processing difficulty is rated \"easy\" by the manufacturer, making it a consumable accessible even to operators not specialised in semi-flexible materials.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with a desiccant after opening, to preserve extrusion properties (semi-flexible materials are sensitive to ambient humidity). Technical data sheet and safety data sheet (MSDS) available from the distributor for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eHigh-performance semi-flexible\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHardness\u003c\/th\u003e\n\u003ctd\u003eShore 60D\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e230 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate temperature\u003c\/th\u003e\n\u003ctd\u003e50 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eBrass or copper\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eStrong\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eSprayed plate (3DLac)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish quality\u003c\/th\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll 1.75 mm FDM printers capable of printing semi-flexible materials\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream, SH and EXO printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers equipped with a Direct Drive extruder\u003c\/li\u003e\n  \u003cli\u003eApplications: bumpers, buffers, dampers, edge protectors, anti-vibration supports, protective casings, handling jigs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"0.75 kg \/ Black","offer_id":57371832516952,"sku":"FLXV5893","price":37.5,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ Natural","offer_id":57371832549720,"sku":"FLXV969","price":37.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/bumper-ultra-750g-noir-3.jpg?v=1779786961"},{"product_id":"abs-ultra-volumic","title":"ABS ULTRA – Volumic","description":"\u003cp style=\"text-align: justify;\"\u003eABS ULTRA is a professional Acrylonitrile Butadiene Styrene (ABS) filament developed by Volumic, whose formulation is optimised to significantly reduce the warping defects (differential shrinkage and corner lifting) typically associated with standard ABS. This characteristic enables printing at lower temperatures than conventional ABS while maintaining good inter-layer bonding and a controlled surface finish.\u003cbr\u003e\u003cbr\u003eABS remains a reference technical thermoplastic for functional parts subject to moderate to high mechanical stresses and service temperatures higher than those supported by PLA. Several colours and packaging formats are offered in the range.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eABS ULTRA prints at a recommended nozzle temperature of 235 °C on a heated build plate at 75 °C, and is compatible with all nozzle materials (brass, copper\/nickel, steel). Build plate adhesion is rated as normal, best used on a sprayed plate (3DLac-type spray), with a brim recommended on parts with low contact surface or high build height. Processing difficulty is rated \"easy\" by the manufacturer. A closed or semi-closed enclosure is advisable to stabilise the ambient temperature on large parts and limit any residual shrinkage.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eStore the spool in a dry environment, in a resealable bag with a desiccant after opening, to preserve extrusion properties. Note that ABS emits fumes during printing: use in a well-ventilated room, or on a machine equipped with a HEPA\/activated carbon filtration system. Technical data sheet and safety data sheet (MSDS) available from the distributor for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS (Acrylonitrile Butadiene Styrene)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended nozzle temperature\u003c\/th\u003e\n\u003ctd\u003e235 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended build plate temperature\u003c\/th\u003e\n\u003ctd\u003e75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle type\u003c\/th\u003e\n\u003ctd\u003eAll (brass, copper\/nickel, steel)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate adhesion\u003c\/th\u003e\n\u003ctd\u003eNormal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate configuration\u003c\/th\u003e\n\u003ctd\u003eSprayed plate (3DLac), brim recommended on large parts\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDifficulty\u003c\/th\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFinish quality\u003c\/th\u003e\n\u003ctd\u003eVery good\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial characteristics\u003c\/th\u003e\n\u003ctd\u003eVery low warping, good inter-layer bonding, low printing temperatures for ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eVolumic ULTRA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 mm FDM printers capable of printing ABS (heated build plate ≥ 75 °C)\u003c\/li\u003e\n  \u003cli\u003eOptimised for Volumic Stream, SH and EXO printers\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers with closed or semi-closed enclosure (Prusa MK4 \/ CORE One, Bambu Lab X1, Stratasys F-series, Raise3D Pro, etc.)\u003c\/li\u003e\n  \u003cli\u003eApplications: functional parts, technical housings, mechanical supports, validation prototypes, industrial replacement parts\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Volumic","offers":[{"title":"1 kg \/ Blanc","offer_id":57371876524376,"sku":"ABSV659","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Bleu","offer_id":57371876557144,"sku":"ABSV662","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris","offer_id":57371876589912,"sku":"ABSV661","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Gris clair","offer_id":57371876622680,"sku":"ABSV660","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Nature","offer_id":57371876655448,"sku":"ABSV664","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Noir","offer_id":57371876688216,"sku":"ABSV658","price":38.5,"currency_code":"EUR","in_stock":true},{"title":"1 kg \/ Rouge","offer_id":57371876720984,"sku":"ABSV663","price":38.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/abs-ultra-1kg-blanc-3.jpg?v=1779787606"},{"product_id":"basf-ultrafuse-pet-cf15","title":"BASF Ultrafuse PET CF15","description":"\u003cp style=\"text-align: justify;\"\u003eUltrafuse PET CF15 is a premium technical filament developed by BASF Forward AM, the additive manufacturing division of the BASF Group. It combines a polyethylene terephthalate (PET) matrix with 15% carbon fibre reinforcement, making it an industrial consumable designed for functional parts under high mechanical and thermal stress.\u003cbr\u003e\u003cbr\u003eCompared to other carbon fibre-filled composites, its formulation is optimised for ease of processing and dimensional stability: very low moisture absorption, low abrasiveness, direct printing possible on glass or PEI sheet, high surface quality. PET CF15 is compatible with HIPS as a detachable support material and BVOH as a water-soluble support, making it usable on dual-extruder machines for complex geometries.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at a nozzle temperature of 250–270 °C on a heated build plate between 65 and 85 °C, with a recommended speed range of 30–80 mm\/s. The presence of fibres requires a ruby or hardened steel nozzle with a minimum diameter of 0.6 mm to ensure regular flow without blockage. Before printing, drying the filament at 65 °C in a hot-air dryer or vacuum oven for 4–16 hours is recommended to restore the extrusion properties of an opened spool.\u003c\/p\u003e\n\n\u003ch2\u003eStorage and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003ePET CF15 exhibits very low native moisture absorption, making it a particularly suitable material for humid operating environments. Nevertheless, store the spool in a dry environment, in a resealable bag with a desiccant after opening. BASF technical data sheet (Ultrafuse PET CF15 TDS) and safety data sheet (MSDS) available from the distributor, for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePET with carbon fibre fill (15 %)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eCharacteristic appearance of carbon-filled materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e250–270 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate temperature\u003c\/th\u003e\n\u003ctd\u003e65–85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate material\u003c\/th\u003e\n\u003ctd\u003eGlass or PEI sheet\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMinimum nozzle diameter\u003c\/th\u003e\n\u003ctd\u003e≥ 0.6 mm (ruby or hardened steel mandatory)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e30–80 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eHeat resistance\u003c\/th\u003e\n\u003ctd\u003eUp to 108 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e12.5 MPa (ZX) \/ 63.2 MPa (XY) – ISO 527\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2253 MPa (ZX) \/ 5452 MPa (XY) – ISO 178\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e0.5 % (ZX) \/ 3.7 % (XY) – ISO 527\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eIzod impact resistance (notched)\u003c\/th\u003e\n\u003ctd\u003e2.0 kJ\/m² (ZX) \/ 5.7 kJ\/m² (XY) – ISO 180\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eMoisture absorption\u003c\/th\u003e\n\u003ctd\u003eVery low\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCompatible supports\u003c\/th\u003e\n\u003ctd\u003eHIPS (detachable), BVOH (soluble)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eRecommended drying\u003c\/th\u003e\n\u003ctd\u003e65 °C, 4–16 h (hot-air dryer or vacuum oven)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet TDS, safety data sheet (MSDS)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBASF Forward AM – Ultrafuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1.75 mm FDM printers equipped with a ruby or hardened steel nozzle ≥ 0.6 mm capable of reaching 270 °C\u003c\/li\u003e\n  \u003cli\u003eClosed-enclosure professional printers recommended\u003c\/li\u003e\n  \u003cli\u003eCompatible with Intamsys Funmat, Raise3D Pro, Bambu Lab X1 Carbon \/ X1E \/ H2D, Prusa MK4S \/ XL \/ CORE One, Volumic Stream Performance, Zortrax, etc.\u003c\/li\u003e\n  \u003cli\u003eCompatible with dual-extruder printers using HIPS or BVOH as support material\u003c\/li\u003e\n  \u003cli\u003eApplications: automotive components, workshop jigs and fixtures, lightweight structural parts, applications in humid working environments, industrial parts with high mechanical and thermal strength\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"Black \/ 0.75 kg \/ 1.75 mm","offer_id":57372879749464,"sku":"PCF-0350a075","price":67.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/ULTRAFUSECF15.png?v=1779800064"},{"product_id":"basf-ultrafuse-pla-pro1","title":"BASF Ultrafuse PLA PRO1","description":"\u003cp style=\"text-align: justify;\"\u003eUltrafuse PLA PRO1 is a bio-based engineering filament developed by BASF Forward AM, positioned as a technical PLA for professionals simultaneously requiring speed, mechanical strength and surface quality. Its formulation prints as easily as a standard PLA but allows print speeds previously reserved for so-called \"high-speed\" profiles, while exhibiting mechanical properties superior to those of printed ABS.\u003cbr\u003e\u003cbr\u003eBy adjusting print parameters, the user can orient the profile towards pure speed, surface quality, mechanical strength, or a balance between these three axes. Quality control of production guarantees controlled consistency between colours and between batches — a point sought in multi-machine series production. Several colours and diameters are offered in the range.\u003c\/p\u003e\n\n\u003ch2\u003ePrinting behaviour\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe filament prints at a nozzle temperature of 200–220 °C on a heated build plate between 50 and 70 °C, with an extremely wide speed range from 40 to 300 mm\/s. To exploit the highest speeds, it may be necessary to raise the nozzle temperature to 220–230 °C; at very high speed, surface quality may be slightly degraded.\u003cbr\u003e\u003cbr\u003eIts very good inter-layer bonding increases the final strength of parts and their functionality. The filament deposits directly on glass or low-temperature tape, without the need for a closed enclosure. The material is biocompatible (Forward AM documentation available) and presents biocompatibility useful in certain regulated applications.\u003c\/p\u003e\n\n\u003ch2\u003eApplications and documentation\u003c\/h2\u003e\n\u003cp style=\"text-align: justify;\"\u003eThe target applications documented by the manufacturer cover workshop jigs and fixtures as well as functional prototyping. Technical data sheet (TDS), safety data sheet (MSDS) and dedicated print profiles (Ultimaker, Prusa, BigRep, Bambu Lab, Raise3D, BCN3D) available from Forward AM and the distributor, for integration into HSE procedures and the workshop risk register.\u003c\/p\u003e\n\n\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eBio-based engineering PLA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable diameters in the range\u003c\/th\u003e\n\u003ctd\u003eSeveral diameters offered\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable packaging\u003c\/th\u003e\n\u003ctd\u003eSeveral packaging formats offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable colours\u003c\/th\u003e\n\u003ctd\u003eSeveral colours offered in the range\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle temperature\u003c\/th\u003e\n\u003ctd\u003e200–220 °C (up to 230 °C for very high speeds)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate temperature\u003c\/th\u003e\n\u003ctd\u003e50–70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBuild plate material\u003c\/th\u003e\n\u003ctd\u003eGlass, low-temperature tape\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eNozzle diameter\u003c\/th\u003e\n\u003ctd\u003e≥ 0.4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint speed\u003c\/th\u003e\n\u003ctd\u003e40–300 mm\/s (depending on printer and geometry)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003ePrint time reduction\u003c\/th\u003e\n\u003ctd\u003e30–80 % depending on printer and part\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e21.8 MPa (Z-X) \/ 48 MPa (X-Y)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e2340 MPa (X-Z) \/ 2823 MPa (X-Y)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e0.9 % (Z-X) \/ 21.9 % (X-Y)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eCharacteristics\u003c\/th\u003e\n\u003ctd\u003eBio-based, biocompatible, recycled packaging, generally recyclable\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eApplications\u003c\/th\u003e\n\u003ctd\u003eJigs \u0026amp; fixtures, functional prototyping\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eAvailable documents\u003c\/th\u003e\n\u003ctd\u003eTechnical data sheet (TDS), safety data sheet (MSDS), dedicated print profiles\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eBASF Forward AM – Ultrafuse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eAll FDM printers compatible with the chosen filament diameter\u003c\/li\u003e\n  \u003cli\u003eStandard print profiles available for Ultimaker, Prusa, BigRep, BCN3D Stratos\u003c\/li\u003e\n  \u003cli\u003eHigh-speed profiles available for Bambu Lab and Raise3D\u003c\/li\u003e\n  \u003cli\u003eCompatible with professional FDM printers capable of reaching 220–230 °C and using high-speed profiles\u003c\/li\u003e\n  \u003cli\u003eApplications: workshop jigs and fixtures, functional prototyping, parts requiring a speed\/strength\/surface quality balance, applications requiring biocompatibility (to be validated according to use)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BASF","offers":[{"title":"0.75 kg \/ 1.75 mm \/ Noir","offer_id":57373330276696,"sku":"PR1-7502a075","price":28.88,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Gris","offer_id":57373330309464,"sku":"PR1-7523a075","price":28.88,"currency_code":"EUR","in_stock":true},{"title":"0.75 kg \/ 1.75 mm \/ Blanc","offer_id":57373330342232,"sku":"PR1-7501a075","price":28.88,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Noir","offer_id":57373330375000,"sku":"PR1-7502a250","price":73.52,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Gris","offer_id":57373330407768,"sku":"PR1-7523a250","price":73.52,"currency_code":"EUR","in_stock":true},{"title":"2 kg \/ 1.75 mm \/ Blanc","offer_id":57373330440536,"sku":"PR1-7501a250","price":73.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/files\/Ultrafuse-PLA-PRO1-Black-175-2.png?v=1779804851"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0938\/8979\/0296\/collections\/3DPS_consommables_header_collection.webp?v=1779363681","url":"https:\/\/3dprint.shop\/en\/collections\/consommables.oembed?page=6","provider":"3DPrint.shop","version":"1.0","type":"link"}